Delete the old export dbs on upgrade.
Testing this an exporting to a directory with both exporttree=yes and
importtree=yes, it refused to let an interrupted export proceed after
upgrade, with "unsafe to overwrite file". An import resolved the
problem.
It will be populated automatically by the next command that needs data
from it, the same way it gets populated in a fresh clone. That may be a
little expensive, but it's a one time cost, and no slower than in a
fresh clone.
The old db is cleaned up when a new incremental fsck is started.
The incremental fsck won't pick up where the old one left off, but I
consider this a minor enough thing that it can just be documented and
won't be a problem.
Renamed the database to .git/annex/keysdb;
the old .git/annex/keys gets deleted during the upgrade.
It is possible that an old git-annex process is running during the
upgrade. If so, it will be able to continue using the old keys db until the
upgrade is complete, and then will presumably fail in some ugly way. Or
perhaps the upgrade will be unable to delete the open files on some
systems, and so fail with an ugly error message.
It's also possible for multiple processes to be running the upgrade
concurrently. That should be fine; they will both write the same
information into the keys db.
Other databases still need to be upgraded.
Fix bug that lost modifications to unlocked files when init is re-ran in an
already initialized repo.
In retrospect needing scanUnlockedFiles False in the direct mode upgrade
path was a good hint that it was unsafe when used with True.
However, this bug did not affect upgrade from v5. In such an upgrade, an
unlocked file that is modified is left as-is. The only place
scanUnlockedFiles True did overwrite modified unlocked files is during an
git-annex init of a repo that was already initialized by git-annex.
(I also tried a scenario where the repo had not been initialized by
git-annex yet, but was cloned from a v7 repo with an unlocked file, and the
pointer file replaced with some other content, and the data loss did not
occur in that situation.)
Since the fixed scanUnlockedFiles avoids overwriting non-pointer files,
it should be safe to run in any situation, so there's no need any longer
for the parameter.
That git fixed a memory leak that could cause an OOM during the upgrade.
Most git-annex builds have a new enough git already.
OSX git was upgraded with brew.
Linux i386ancient build's git was too old. Upgrading it to a fixed
git didn't work (due to the newer git not working with the old ssh,
https://bugs.chromium.org/p/git/issues/detail?id=7 )
Choices to deal with that were:
* Somehow make direct mode upgrade work with the old git, avoiding its
OOM problem. One way would be to switch the repo to indirect mode
first, and so upgrade to a repo with locked files. Not good when
the filesystem does not support symlinks.
* backport the OOM fix from git 2.22
(And do what about the version number so git-annex knows it's fixed?)
* backport openssh (and possibly more stuff)
* move the i386ancient build to at least Debian stretch (still backporting git)
But this will make it no longer work with some of the ancient kernels it
targets.
Of those, backporting the OOM fix seemed the best approach. Put "oomfix"
in the git version number to indicate it.
I have not automated building the git backport, so here's the patch I
used:
diff -ur orig/git-2.1.4/convert.c git-2.1.4/convert.c
--- orig/git-2.1.4/convert.c 2014-12-18 18:42:18.000000000 +0000
+++ git-2.1.4/convert.c 2019-08-29 20:05:04.371872338 +0100
@@ -404,7 +404,7 @@
if (start_async(&async))
return 0; /* error was already reported */
- if (strbuf_read(&nbuf, async.out, len) < 0) {
+ if (strbuf_read(&nbuf, async.out, 0) < 0) {
error("read from external filter %s failed", cmd);
ret = 0;
}
diff -ur orig/git-2.1.4/GIT-VERSION-GEN git-2.1.4/GIT-VERSION-GEN
--- orig/git-2.1.4/GIT-VERSION-GEN 2014-12-18 18:42:18.000000000 +0000
+++ git-2.1.4/GIT-VERSION-GEN 2019-08-29 20:06:39.132743228 +0100
@@ -1,7 +1,7 @@
#!/bin/sh
GVF=GIT-VERSION-FILE
-DEF_VER=v2.1.4
+DEF_VER=v2.1.4.oomfix
LF='
'
diff -ur orig/git-2.1.4/configure git-2.1.4/configure
--- orig/git-2.1.4/configure 2014-12-18 18:42:19.000000000 +0000
+++ git-2.1.4/configure 2019-08-29 20:27:45.896380015 +0100
@@ -580,8 +580,8 @@
# Identity of this package.
PACKAGE_NAME='git'
PACKAGE_TARNAME='git'
-PACKAGE_VERSION='2.1.4'
-PACKAGE_STRING='git 2.1.4'
+PACKAGE_VERSION='2.1.4.oomfix'
+PACKAGE_STRING='git 2.1.4.oomfix'
PACKAGE_BUGREPORT='git@vger.kernel.org'
PACKAGE_URL=''
diff -ur orig/git-2.1.4/version git-2.1.4/version
--- orig/git-2.1.4/version 2014-12-18 18:42:19.000000000 +0000
+++ git-2.1.4/version 2019-08-29 20:06:17.572545210 +0100
@@ -1 +1 @@
-2.1.4
+2.1.4.oomfix
If a direct mode file is deleted or modified, and there are no other
files containing the content, the content was lost. That's a normal
thing that can happen in direct mode, but not in v7, so the upgrade
code has to notice it in order for the location log to be accurate.
No longer used. The only possible user of it would be code in
Upgrade.V5, so I verified that the parts of Annex.Content it used were
not used to manipulate direct mode files.
Three reasons:
* Committing as part of an upgrade is very unusual and unexpected.
* The commit was failing with a weird error message when done during an
automatic upgrade.
* Let me remove more of that sweet^Whorrible direct mode code.
When upgrading a direct mode repo to v7 with adjusted unlocked branches,
fix a bug that prevented annex.thin from taking effect for the files in
working tree.
The hard links used to be ok, but commit 8e22114735 accidentially
broke them. It repopulates the worktree file, which is already a hard link,
and when it's creating the new file, the link count is already 2, and so it
doesn't make a hard link then.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
This reverts commit 4536c93bb2.
That broke Read/Show of a Key, and unfortunately Key is read in at least
one place; the GitAnnexDistribution data type.
It would be worth bringing this optimisation back, but it would need
either a custom Read/Show instance that preserves back-compat, or
wrapping Key in a data type that contains the serialization, or changing
how GitAnnexDistribution is serialized.
Also, the Eq instance would need to compare keys with and without a
cached seralization the same.
This will speed up the common case where a Key is deserialized from
disk, but is then serialized to build eg, the path to the annex object.
It means that every place a Key has any of its fields changed, the cache
has to be dropped. I've grepped and found them all. But, it would be
better to avoid that gotcha somehow..
Now there's a ByteString used all the way from disk to Key.
The main complication in this conversion was the use of fromInternalGitPath
in several places to munge things on Windows. The things that used that
were changed to parse the ByteString using either path separator.
Also some code that had read from files to a String lazily was changed
to read a minimal strict ByteString.
Most of the individual logs are not converted yet, only presense logs
have an efficient ByteString Builder implemented so far. The rest
convert to and from String.
* Fix bug upgrading from direct mode to v7: when files in the repository
were already committed as v7 unlocked files elsewhere, and the
content was present in the direct mode repository, the annexed files
got their full content checked into git.
* Fix bug that caused v7 unlocked files in a direct mode repository
to get locked when committing.
This commit was sponsored by Nick Piper on Patreon.
Install new git hooks in this version.
This does beg the question of what to do if git later gets eg a
post-smudge hook, that could run git-annex smudge --update. I think the
thing to do in that case would be to make git-annex smudge --update
install the new hooks. That way, as the user uses git-annex, the hook
would be created pretty quickly and without needing any extra syscalls
except for when git-annex smudge --update is called.
I considered doing something like that for installation of the
post-checkout and post-merge hooks, which would have avoided the need
for v7. But the only place it was cheap to do it would be in git-annex smudge
which could cheaply notice that smudge.log didn't exist yet and so know
the hooks needed to be installed. But since smudge used to populate pointer
files, it would be quite surprising if a single git checkout/merge failed
to update the work tree, and so that idea didn't work out.
The other reason for v7 is psychological -- users don't need to worry
about whether they might be running an old version of git-annex that
doesn't support their v7 repository very well. And bug reports about
"v6" have gotten a bit of a bad association in my head since they often
hit one of the known limitations and didn't realize it was experimental.
newtyped RepoVersion Int to avoid needing 2 comparisons in
versionSupportsUnlockedPointers etc. Also it's just nicer.
This commit was sponsored by John Pellman on Patreon.
* init, upgrade: Install git post-checkout and post-merge hooks that run
git annex smudge --update.
* precommit: Run git annex smudge --update, because the post-merge
hook is not run when there is a merge conflict. So the work tree will
be updated when a commit is made to resolve the merge conflict.
* precommit: Run git annex smudge --update, because the post-merge
hook is not run when there is a merge conflict. So the work tree will
be updated when a commit is made to resolve the merge conflict.
* Note that git has no hooks run after git stash or git cherry-pick,
so the user will have to manually run git annex smudge --update
after such commands.
Nothing currently installs the hooks into v6 repos that already exist.
Something will need to be done about that, either move this behavior to v7,
or document that the user will need to manually fix up their v6 repos.
This commit was sponsored by Eric Drechsel on Patreon.
Combinations like --hide-misssing --unlocked seem very useful. On the
other hand, combining --fix with --unlock doesn't make sense because a
file can be either unlocked or a symlink that can be fixed, but not
both.
Changed the serialization of HideMissingAdjustment in passing, but it
has not actually been used yet so nothing will be broken.
This commit was sponsored by Trenton Cronholm on Patreon.
Avoids annex.largefiles inconsitency and also avoids a lot of
unneccessary calls to the clean filter when a large repo's clone
is being initialized.
This commit was supported by the NSF-funded DataLad project.
Where before the "name" of a key and a backend was a string, this makes
it a concrete data type.
This is groundwork for allowing some varieties of keys to be disabled
in file2key, so git-annex won't use them at all.
Benchmarks ran in my big repo:
old git-annex info:
real 0m3.338s
user 0m3.124s
sys 0m0.244s
new git-annex info:
real 0m3.216s
user 0m3.024s
sys 0m0.220s
new git-annex find:
real 0m7.138s
user 0m6.924s
sys 0m0.252s
old git-annex find:
real 0m7.433s
user 0m7.240s
sys 0m0.232s
Surprising result; I'd have expected it to be slower since it now parses
all the key varieties. But, the parser is very simple and perhaps
sharing KeyVarieties uses less memory or something like that.
This commit was supported by the NSF-funded DataLad project.
Turns out that Data.List.Utils.split is slow and makes a lot of
allocations. Here's a much simpler single character splitter that behaves
the same (even in wacky corner cases) while running in half the time and
75% the allocations.
As well as being an optimisation, this helps move toward eliminating use of
missingh.
(Data.List.Split.splitOn is nearly as slow as Data.List.Utils.split and
allocates even more.)
I have not benchmarked the effect on git-annex, but would not be surprised
to see some parsing of eg, large streams from git commands run twice as
fast, and possibly in less memory.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Fixes a bug introduced with v6 mode that I didn't notice until now.
Probably not many v3 repos left out there, and upgrading them to v6 mode
is not disastrous, only a little premature.
This commit was sponsored by Riku Voipio
When annex.thin is set, adding an object will add the execute bits to the
work tree file, and this does mean that the annex object file ends up
executable.
This doesn't add any complexity that wasn't already present, because git
annex add of an executable file has always ingested it so that the annex
object ends up executable.
But, since an annex object file can be executable or not, when populating
an unlocked file from one, the executable bit is always added or removed
to match the mode of the pointer file.
This makes the direct mode to v6 upgrade able to be performed in one clone
of a repository without affecting other clones, which can continue using v5
and direct mode.
Fixes several bugs with updates of pointer files. When eg, running
git annex drop --from localremote
it was updating the pointer file in the local repository, not the remote.
Also, fixes drop ../foo when run in a subdir, and probably lots of other
problems. Test suite drops from ~30 to 11 failures now.
TopFilePath is used to force thinking about what the filepath is relative
to.
The data stored in the sqlite db is still just a plain string, and
TopFilePath is a newtype, so there's no overhead involved in using it in
DataBase.Keys.
May be unlocked files pulled from elsewhere, but converting from direct
mode will add more. So, do the scan for them first, since it empties
anything currently in the database.
Decided it's too scary to make v6 unlocked files have 1 copy by default,
but that should be available to those who need it. This is consistent with
git-annex not dropping unused content without --force, etc.
* Added annex.thin setting, which makes unlocked files in v6 repositories
be hard linked to their content, instead of a copy. This saves disk
space but means any modification of an unlocked file will lose the local
(and possibly only) copy of the old version.
* Enable annex.thin by default on upgrade from direct mode to v6, since
direct mode made the same tradeoff.
* fix: Adjusts unlocked files as configured by annex.thin.
This fixes a race where the modified file ended up in annex/objects, and
the InodeCache stored in the database was for the modified version, so
git-annex didn't know it had gotten modified.
The race could occur when the smudge filter was running; now it gets the
InodeCache before generating the Key, which avoids the race.
Since all places where a repo is used in direct mode need to have git-annex
upgraded before the repo can safely be converted to v6, the upgrade needs
to be manual for now.
I suppose that at some point I'll want to drop all the direct mode support
code. At that point, will stop supporting v5, and will need to auto-upgrade
any remaining v5 repos. If possible, I'd like to carry the direct mode
support for say, a year or so, to give people plenty of time to upgrade and
avoid disruption.
I hope this doesn't impact speed much -- it does have to pull out a value
from Annex state every time it accesses the branch now.
The test case I dropped has never caught any problems that I can remember,
and would have been rather difficult to convert.
* init: Repository tuning parameters can now be passed when initializing a
repository for the first time. For details, see
http://git-annex.branchable.com/tuning/
* merge: Refuse to merge changes from a git-annex branch of a repo
that has been tuned in incompatable ways.
