I had thought using ByteString would avoid the problem, but the
quickcheck property is still taking Arbitrary String input, so the use
of ByteString internally doesn't matter.
The parser and looking up config keys in the map should both be faster
due to using ByteString.
I had hoped this would speed up startup time, but any improvement to
that was too small to measure. Seems worth keeping though.
Note that the parser breaks up the ByteString, but a config map ends up
pointing to the config as read, which is retained in memory until every
value from it is no longer used. This can change memory usage
patterns marginally, but won't affect git-annex.
While L.toStrict copies, profiling showed it was only around 0.3% of
git-annex find runtime. Does not seem worth optimising that, which would
probably involve either a major refactoring, or a use of
UnsafeInterleaveIO.
Also, it seems to me that the latter would need to read chunks, and
preappend the leftover part to the next chunk. But a strict ByteString
append itself is a copy, so I'm not convinced that would be faster than
L.toStrict.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
Goal is to make git-annex faster by using ByteString for all the
worktree traversal. For now, this is focusing on Command.Find,
in order to benchmark how much it helps. (All other commands are
temporarily disabled)
Currently in a very bad unbuildable in-between state.
Eg:
git clone url --bare r
git --git-dir r annex init
This resulted in worktree = Just "." and so several things that check
worktree to determine when the repo is bare ran code paths intended for
non-bare. One such code path[1] ran git checkout with --worktree=. which
actually makes it ignore core.bare config, and so the current directory
got populated with a checkout of the master branch in this example. There
was probably also other breakage.
The fix is a bit complicated because whether the repo is bare is not
known until after Git.Config reads the config, but Git.Config handles
setting the RepoLocations's worktree when core.worktree is set. So have
to assume the worktree is the cwd, let core.worktree override that,
and then if the repo turns out to be bare, it's set back to Nothing.
(And then GIT_WORK_TREE can still override all of that.)
[1] switchHEADBack, which runs even when the clone is not from a bare repo.
* git-lfs: The url provided to initremote/enableremote will now be
stored in the git-annex branch, allowing enableremote to be used without
an url. initremote --sameas can be used to add additional urls.
* git-lfs: When there's a git remote with an url that's known to be
used for git-lfs, automatically enable the special remote.
Renamed the database to .git/annex/keysdb;
the old .git/annex/keys gets deleted during the upgrade.
It is possible that an old git-annex process is running during the
upgrade. If so, it will be able to continue using the old keys db until the
upgrade is complete, and then will presumably fail in some ugly way. Or
perhaps the upgrade will be unable to delete the open files on some
systems, and so fail with an ugly error message.
It's also possible for multiple processes to be running the upgrade
concurrently. That should be fine; they will both write the same
information into the keys db.
Other databases still need to be upgraded.
Rescued from commit 11d6e2e260 which removed
db benchmarks in favor of benchmarking arbitrary git-annex commands. Which
is nice and general, but microbenchmarks are useful too.
Work around git cat-file --batch's odd stripping of carriage return from
the end of the line (some windows infection), avoiding crashing when the
repo contains a filename ending in a carriage return.
debian oldoldstable has 2.1, and that's what i386ancient uses. It would be
better to require git 2.2, which is needed to use adjusted branches, but
can't do that w/o losing support for some old linux kernels or a
complicated git backport.
This typo would make "git cat-file cat-file" fail, and the way it's used,
I think it broke querying all info from filenames containing newlines,
because the other queries are only run when it succeeds.
Drop support for building with ghc older than 8.4.4, and with older
versions of serveral haskell libraries than will be included in Debian 10.
The only remaining version ifdefs in the entire code base are now a couple
for aws!
This commit should only be merged after the Debian 10 release.
And perhaps it will need to wait longer than that; it would make
backporting new versions of git-annex to Debian 9 (stretch) which
has been actively happening as recently as this year.
This commit was sponsored by Ilya Shlyakhter.
The hoped for optimisation of CommandStart with -J did not materialize.
In fact, not runnign CommandStart in parallel is slower than -J3.
So, CommandStart are still run in parallel.
(The actual bad performance I've been seeing with -J in my big repo
has to do with building the remoteList.)
But, this is still progress toward making -J faster, because it gets rid
of the onlyActionOn roadblock in the way of making CommandCleanup jobs
run separate from CommandPerform jobs.
Added OnlyActionOn constructor for ActionItem which fixes the
onlyActionOn breakage in the last commit.
Made CustomOutput include an ActionItem, so even things using it can
specify OnlyActionOn.
In Command.Move and Command.Sync, there were CommandStarts that used
includeCommandAction, so output messages, which is no longer allowed.
Fixed by using startingCustomOutput, but that's still not quite right,
since it prevents message display for the includeCommandAction run
inside it too.
Prevents merging the import from deleting the non-preferred files from
the branch it's merged into.
adjustTree previously appended the new list of items to the old, which
could result in it generating a tree with multiple files with the same
name. That is not good and confuses some parts of git. Gave it a
function to resolve such conflicts.
That allowed dealing with the problem of what happens when the import
contains some files (or subtrees) with the same name as files that were
filtered out of the export. The files from the import win.
Needed for the --quiet to actually shut it up. The extra verification
this makes it do should be fine, as this is supposed to really return a
single tree's sha.
git rev-parse --quiet avoids "fatal: Invalid object name" when the
branch does not exist. Git.Ref.tree already returned a Maybe, so callers
already handle those cases themselves.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
The branch is only updated once the export is 100% complete. This way,
if an export is started but interrupted and so the remote does not yet
contain some of the files, an import will make a commit on the old
branch, and so won't delete the missing files.
Added graftTree but it's buggy.
Should use graftTree in Annex.Branch.graftTreeish; it will be faster
than the current implementation there.
Started Annex.Import, but untested and it doesn't yet handle tree
grafting.
My concern with using bytestring for this is the file needs to be split
into lines, and the encoding is not known. It's safe to split a utf-8
encoded file on the \n byte; only newlines get encoded to that byte in utf-8.
And this code already assumes utf-8 or ascii encoding, because it used
the filesystem encoding.
This relies on git ls-files --with-tree, which I'm using in a way that
its man page does not document. Hm. I emailed the git list to try to get
the docs improved, but at least the git test suite does test the same
kind of use case I'm using here.
Performance impact when not in an adjusted branch is limited to some
additional MVar accesses, and a single git call to determine the name of
the current branch. So very minimal.
When in an adjusted branch, the performance impact is
in Annex.WorkTree.lookupFile, which starts doing an equal amount of work
for files that didn't exist as it already did for files that were
unlocked.
This commit was sponsored by Jochen Bartl on Patreon.
Running git-annex linux builds in termux seems to work well enough that the
only reason to keep the Android app would be to support Android 4-5, which
the old Android app supported, and which I don't know if the termux method
works on (although I see no reason why it would not).
According to [1], Android 4-5 remains on around 29% of devices, down from
51% one year ago.
[1] https://www.statista.com/statistics/271774/share-of-android-platforms-on-mobile-devices-with-android-os/
This is a rather large commit, but mostly very straightfoward removal of
android ifdefs and patches and associated cruft.
Also, removed support for building with very old ghc < 8.0.1, and with
yesod < 1.4.3, and without concurrent-output, which were only being used
by the cross build.
Some documentation specific to the Android app (screenshots etc) needs
to be updated still.
This commit was sponsored by Brett Eisenberg on Patreon.
* init: Improve generated post-receive hook, so it won't fail when
run on a system whose git-annex is too old to support git-annex post-receive
* init: Update the post-receive hook when re-run in an existing repository.
This commit was sponsored by Jack Hill on Patreon.
Work around git cat-file --batch's protocol not supporting newlines by
running git cat-file not batched and passing the filename as a
parameter.
Of course this is quite a lot less efficient, especially because it
currently runs it multiple times to query for different pieces of
information.
Also, it has subtly different behavior when the batch process was
started and then some changes were made, in which case the batch process
sees the old index but this workaround sees the current index. Since
that batch behavior is mostly a problem that affects the assistant and has
to be worked around in it, I think I can get away with this difference.
I don't know of any other problems with newlines in filenames, everything
else in git I can think of supports -z. And git-annex's json output
supports newlines in filenames so downstream parsers from git-annex will be ok.
git-annex commands that use --batch themselves don't support newlines
in input filenames; using --json --batch is currently a way around that
problem.
This commit was sponsored by Ewen McNeill on Patreon.
* Don't use GIT_PREFIX when GIT_WORK_TREE=. because it seems git
does not intend GIT_WORK_TREE to be relative to GIT_PREFIX in that
case, despite GIT_WORK_TREE=.. being relative to GIT_PREFIX.
* Don't use GIT_PREFIX to fix up a relative GIT_DIR, because
git 2.11 sets GIT_PREFIX set to a path it's not relative to.
and apparently GIT_DIR is never relative to GIT_PREFIX.
Commit e50ed4ba48 led us down this path
by working around a git bug by relying on the barely documented GIT_PREFIX.
This commit was sponsored by Trenton Cronholm on Patreon.
This would be better if getInternalFiles were
more polymorphic, but I can't see a good
way to accomplish that without messing with Data.Typeable,
which seemed like overkill.
Reverted CommandAction back to the simpler version.
This commit was sponsored by Eric Drechsel on Patreon.
Switched code to use a for loop to avoid a filterM that would have
doubled the memory used.
This commit was supported by the NSF-funded DataLad project.
On second thought, git passes filepaths, which may not be valid utf8, so
can't use Text here.
String will be a little bit slower, but not enough to worry about.
Git uses pkt-line in the pack and http protocols, and for the long-running
filter processes protocol as well.
This should be a quite efficient parser and builder since it uses
attoparsec and bytestring-builder.
This adds a dependency on attoparsec, but it's a free dependency because
eg aeson depends on attoparsec and git-annex depends on aeson.
This commit was supported by the NSF-funded DataLad project.
Support working trees set up by git-worktree, by setting up some symlinks
such that git-annex links work right.
Also improved support for repositories created with --separate-git-dir.
At least recent git makes a .git file for those (older may have used a
symlink?), so that also needs to be converted to a symlink.
This commit was sponsored by Nick Piper on Patreon.
Work around git bug that runs smudge/clean filters at the top of the
repository while passing them a relative GIT_WORK_TREE that may point
outside of the repository, by using GIT_PREFIX to get back to the
subdirectory where a relative GIT_WORK_TREE is valid.
git devs have been informed of the bug and may fix it, which could conveivably
break this fix, but as it is, this works back to git 1.7.6.
This commit was sponsored by Jochen Bartl on Patreon.
https://prime.haskell.org/wiki/Libraries/Proposals/SemigroupMonoid
I am not happy with the fragile pile of CPP boilerplate required to support
ghc back to 7.0, which git-annex still targets for both the android build
and the standalone build targeting old linux kernels. It makes me unlikely
to want to use Semigroup more in git-annex, because the benefit of the
abstraction is swamped by the ugliness. I actually considered ripping out
all the Semigroup instances, but some are needed to use
optparse-applicative.
The problem, I think, is they made this transaction on too fast a timeline.
(Although ironically, work on it started in 2015 or earlier!)
In particular, Debian oldstable is not out of security support, and it's
not possible to follow the simpler workarounds documented on the wiki and
have it build on oldstable (because the semigroups package in it is too
old).
I have only tested this build with ghc 8.2.2, not the newer and older
versions that branches of the CPP support. So there could be typoes, we'll
see.
This commit was sponsored by Brock Spratlen on Patreon.
In some cases, unstaged changes are safe, eg dotfiles in the top which
are not affected by a view. Or non-annexed files in general which would
prevent view branch checkout from proceeding. But in other cases,
particularly unstaged changes to annexed files, entering a view would wipe
out those changes! And so don't allow entering a view with any unstaged
changes.
Staged changes are not safe when entering a view, because the changes get
committed to the view branch, and so the user is unlikely to remember them
when they exit the view, and so will effectively lose them, even if they're
still present in the view branch.
Also, improved the git status parser, although the improvement turned out
to not really be needed.
This commit was sponsored by Eric Drechsel on Patreon.
This fixes a crash when a git submodule has a name starting with a dot.
Such a submodule might contain dotfiles that are intended to be used when
inside the view (since a dot-directory that's not a submodule was already
preserved when entering a view). So, rather than eliminating the submodule
from the view, its git ls-files --stage hash is copied over into the view.
dotfiles/dirs have their git ls-files --stage hashes similarly copied over
to the view. This is more efficient and simpler than the old method,
and also won't break if git ever adds a new type of tree item, like was
done with submodules.
Since the content of dotfiles in the working tree is no longer hashed
when entering a view, when there are unstaged modifications, they are
not included in the view branch. Entering the view branch still works,
but git checkout shows "M .dotfile", and git diff will show the unstaged
changes. This seems like an improvement over the old behavior.
Also made Command.View not delete empty directories that are submodules
when entering a view, while still deleting other empty directories.
This commit was supported by the NSF-funded DataLad project.
This was badly named, it's a not a blob necessarily, but anything that a
tree can refer to.
Also removed the Show instance which was used for serialization to git
format, instead use fmtTreeItemType.
This commit was supported by the NSF-funded DataLad project.
Switch to Data.Map.Strict everywhere that used it.
There are still lots of lazy maps in git-annex. I think switching these
is safe. The risk is that there might be a map that is used in a way
that relies on the values not being evaluated to WHNF, and switching to
strict might result in bad performance or memory use. So, I have not
switched everything.
And for tab completion, by not unnessessarily statting paths to remotes,
which used to cause eg, spin-up of removable drives.
Got rid of the remotes member of Git.Repo. This was a bit painful.
Remote.Git modifies the list of remotes as it reads their configs,
so still need a persistent list of remotes. So, put it in as
Annex.gitremotes. It's only populated by getGitRemotes, so commands
like examinekey that don't care about remotes won't do so.
This commit was sponsored by Jake Vosloo on Patreon.
Fourth or fifth try at this and finally found a way to make it work.
Absurd amount of busy-work forced on me by change in cabal's behavior.
Split up Utility modules that need posix stuff out of ones used by
Setup. Various other hacks around inability for Setup to use anything
that ifdefs a use of unix.
Probably lost a full day of my life to this.
This is how build systems make their users hate them. Just saying.
This reverts commit 51228c2306.
No, still doesn't work when built with cabal. It did with stack; stack
must somehow make the unix package implicitly available.
With cabal, System.Posix.Process and System.Posix.Env are both missing.
Seems I had all the work in past commits to make this build, at least on
linux. I'm actually surprised it does, without a unix dep, Utility.Env
still builds ok somehow despite using System.Posix.Env.
This commit was sponsored by Fernando Jimenez on Patreon.
This avoids warnings from stack about the module not being listed in the
cabal file. So, the generated file is also renamed to Build/SysConfig.
Note that the setup program seems to be cached despite these changes; I
had to cabal clean to get cabal to update it so that Build/SysConfig was
written.
This commit was sponsored by Jochen Bartl on Patreon.
They need unix on non-windows, for Utility.Env, which Build.Configure uses,
but cabal can't express that in a custom-setup stanza.
To avoid this problem, Utility.Env would need to be moved into
unix-compat..
Windows needs the setenv package in custom-setup, but I don't want to
pull it in on unix, which would probably break some builds and need more
work. Instead, split out setEnv to a separate module.
Quite likely, unix-compat will get a portable environment layer, and
then both modules can be removed from here.
This commit was sponsored by Øyvind Andersen Holm.
Seems I forgot to fully test that feature when documenting it.
git rev-parse needs a colon after a branch to de-reference the tree
it points to, rather than the commit. But that had it adding an extra
colon when the user specified "branch:subdir". So, check if there is a
colon before adding one.
This commit was sponsored by Francois Marier on Patreon.
Also deletes any tagged pushes that the assistant might have done,
since those would also prevent resetting a branch back.
This commit was sponsored by andrea rota.
So it will be available later and elsewhere, even after GC.
I first though to use git update-index to do this, but feeding it a line
with a tree object seems to always cause it to generate a git subtree
merge. So, fell back to using the Git.Tree interface to maniupulate the
trees, and not involving the git-annex branch index file at all.
This commit was sponsored by Andreas Karlsson.
Security fix: Disallow hostname starting with a dash, which would get
passed to ssh and be treated an option. This could be used by an attacker
who provides a crafted ssh url (for eg a git remote) to execute arbitrary
code via ssh -oProxyCommand.
No CVE has yet been assigned for this hole.
The same class of security hole recently affected git itself,
CVE-2017-1000117.
Method: Identified all places where ssh is run, by git grep '"ssh"'
Converted them all to use a SshHost, if they did not already, for
specifying the hostname.
SshHost was made a data type with a smart constructor, which rejects
hostnames starting with '-'.
Note that git-annex already contains extensive use of Utility.SafeCommand,
which fixes a similar class of problem where a filename starting with a
dash gets passed to a program which treats it as an option.
This commit was sponsored by Jochen Bartl on Patreon.
QuickCheck 2.10 found a counterexample eg "\929184" broke the property.
As far as I can tell, Git.Filename is matching how git handles encoding
of strange high unicode characters in filenames for display. Git does
not display high unicode characters, and instead displays the C-style
escaped form of each byte. This is ambiguous, but since git is not
unicode aware, it doesn't need to roundtrip parse it.
So, making Git.FileName's roundtrip test only chars < 256 seems fine.
Utility.Format.format uses encode_c, in order to mimic git, so that's
ok.
Utility.Format.gen uses decode_c, but only so that stuff like "\n"
in the format string is handled. If the format string contains C-style
octal escapes, they will be converted to ascii characters, and not
combined into unicode characters, but that should not be a problem.
If the user wants unicode characters, they can include them in the
format string, without escaping them.
Finally, decode_c is used by Utility.Gpg.secretKeys, because gpg
--with-colons hex-escapes some characters in particular ':' and '\\'.
gpg passes unicode through, so this use of decode_c is not a problem.
This commit was sponsored by Henrik Riomar on Patreon.
Removed dependency on MissingH, instead depending on the split
library.
After laying groundwork for this since 2015, it
was mostly straightforward. Added Utility.Tuple and
Utility.Split. Eyeballed System.Path.WildMatch while implementing
the same thing.
Since MissingH's progress meter display was being used, I re-implemented
my own. Bonus: Now progress is displayed for transfers of files of
unknown size.
This commit was sponsored by Shane-o on Patreon.
It was being passed to sh, not to the command, oops. Noticed because it
broke the test suite on OSX, where sh -n silently does nothing. Would
also break on Linux when eg posh was being used as the shell; bash
ignores the -n.
This commit was supported by the NSF-funded DataLad project.
GIT_SSH_COMMAND was not working correctly with git-annex get,
because when used in rsync -e, there were additional parameters
appended at the end, which the GIT_SSH_COMMAND should not see.
Fixed by constructing the shell command differently.
This commit was supported by the NSF-funded DataLad project.
They are handled close the same as they are by git. However, unlike git,
git-annex sometimes needs to pass the -n parameter when using these.
So, this has the potential for breaking some setup, and perhaps there ought
to be a ANNEX_USE_GIT_SSH=1 needed to use these. But I'd rather avoid that
if possible, so let's see if anyone complains.
Almost all places where "ssh" was run have been changed to support the env
vars. Anything still calling sshOptions does not support them. In
particular, rsync special remotes don't. Seems that annex-rsync-transport
already gives sufficient control there.
(Fixed in passing: Remote.Helper.Ssh.toRepo used to extract
remoteAnnexSshOptions and pass them to sshOptions, which was redundant
since sshOptions also extracts those.)
This commit was sponsored by Jeff Goeke-Smith on Patreon.
* Added post-recieve hook, which makes updateInstead work with direct
mode and adjusted branches.
* init: Set up the post-receive hook.
This commit was sponsored by Fernando Jimenez on Patreon.
Argh, didn't need an accumulator here!
I think I use accumulators a lot more than I need to when recusively
processing lists..
This commit was sponsored by Jeff Goeke-Smith on Patreon.
Turns out that Data.List.Utils.split is slow and makes a lot of
allocations. Here's a much simpler single character splitter that behaves
the same (even in wacky corner cases) while running in half the time and
75% the allocations.
As well as being an optimisation, this helps move toward eliminating use of
missingh.
(Data.List.Split.splitOn is nearly as slow as Data.List.Utils.split and
allocates even more.)
I have not benchmarked the effect on git-annex, but would not be surprised
to see some parsing of eg, large streams from git commands run twice as
fast, and possibly in less memory.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
A commit last year that made a partial function use Maybe unfortunately
caused the whole input to need to be consumed, breaking streaming. So,
revert it.
This commit was sponsored by Nick Daly on Patreon.
ghc 8 added backtraces on uncaught errors. This is great, but git-annex was
using error in many places for a error message targeted at the user, in
some known problem case. A backtrace only confuses such a message, so omit it.
Notably, commands like git annex drop that failed due to eg, numcopies,
used to use error, so had a backtrace.
This commit was sponsored by Ethan Aubin.
Restarting a crashing git process could result in filename encoding issues
when not in a unicode locale, as the restarted processes's handles were not
read in raw mode.
Since rawMode is always used when starting a coprocess, didn't bother
to parameterise it and just always enable it for simplicity.
This commit was sponsored by Jake Vosloo on Patreon.
When adding a tree like a/b/c/d when a/b already exists, fixes the bug that
the tree that got created was a/b/a/b/c/d
Just need to flatten out the top N directories of the tree that's being
grafted in, so we get the c/d part. This was complicated by the Tree
data type being a rose tree rather than a regular tree.
This commit was sponsored by Nick Daly on Patreon.
The modification flag was not being set when making modifications deep
in a tree, so parent trees were not updated to contain the modified tree.
Seems to have exposed another bug where the wrong filename gets grafted in.
This commit was sponsored by Brock Spratlen on Patreon.
.. and have to be checked to see if they are a pointed to an annexed file.
Cases where such memory use could occur included, but were not limited to:
- git commit -a of a large unlocked file (in v5 mode)
- git-annex adjust when a large file was checked into git directly
Generally, any use of catKey was a potential problem.
Fix by using git cat-file --batch-check to check size before catting.
This adds another git batch process, which is included in the CatFileHandle
for simplicity.
There could be performance impact, anywhere catKey is used. Particularly
likely to affect adjusted branch generation speed, and operations on
unlocked files in v6 mode. Hopefully since the --batch-check and
--batch read the same data, disk buffering will avoid most overhead.
Leaving only the overhead of talking to the process over the pipe and
whatever computation --batch-check needs to do.
This commit was sponsored by Bruno BEAUFILS on Patreon.
Speeds up commands like "git-annex find --in remote" by over 50%.
Profiling showed that adjustGitEnv was 21% of the time and 37% of the
allocations of that command. It copied the environment each time with
getEnvironment.
The only repeated use of adjustGitEnv is in withIndexFile, which tends to
be run at least once per file. So, it was optimised by keeping a cache of
the environment, which can be reused.
There could be other better ways to optimise this. Maybe get the while
environment once at startup. But, then it would have to be serialized back
out each time running a child process, so I doubt that would be a net win.
It might be better to cache a version of the environment that is
pre-modified to use .git-annex/index. But, profiling doesn't show that
modifying the enviroment is taking any significant time.
* sync: Previously, when run in a branch with a slash in its name,
such as "foo/bar", the sync branch was "synced/bar". That conflicted
with the sync branch used for branch "bar", so has been changed to
"synced/foo/bar".
* adjust: Previously, when adjusting a branch with a slash in its name,
such as "foo/bar", the adjusted branch was "adjusted/bar(unlocked)".
That conflicted with the adjusted branch used for branch "bar",
so has been changed to "adjusted/foo/bar(unlocked)"
* Also, running sync in an adjusted branch did not correctly sync
changes back to the parent branch when it had a slash in its name.
This bug has been fixed.
Eliminate use of Git.Ref.under and Git.Ref.basename; using
Git.Ref.underBase and Git.Ref.base make everything handle deep branches
correctly.
Probably noone was adjusting deep branches, and v6 is still experimental
anyway, so I'm not going to worry about the mess that was left by that bug.
In the case of git-annex sync, using a fixed git-annex with an old unfixed
one will mean they use different sync branches for a deep branch, and so
they may stop syncing until the old one is upgraded. However, that's only
a problem when syncing between repositories without going via a central
bare repository. Added a warning about this to the CHANGELOG, but it's
probably not going to affect many people at all.
This commit was sponsored by Riku Voipio.
Show branch:file that is being operated on.
I had to make ActionItem a type and not a type class because
withKeyOptions' passed two different types of values when using the type
class, and I could not get the type checker to accept that.
This is actually worse than I thought; when git is being run with a
detached work tree, GIT_INDEX_FILE is treated as a path relative to CWD,
instead of the normal behavior of relative the top of the work tree.
This seems to make it basically impossible for any program that wants to
use GIT_INDEX_FILE to use anything other than an absolute path to it; there
are too many configurations to keep straight that can change how git
interprets what should be a simple relative path to a file.
(I have complained to the git developers.)
This affected git annex view. It turns out that some other places
that use GIT_INDEX_FILE were already working around the bug. I removed the
workaround from Annex.Branch since the new workaround will do.
Since git-annex unsets these when started, they have to be explicitly
propigated. Also, this makes --git-dir and --work-tree settings be
reflected in the environment.
The need for this came up in
https://github.com/DanielDent/git-annex-remote-rclone/issues/3
I'd prefer to use the env var, but let's use what git currently supports.
Revert this when the env var gets supported.
Note that the version checking assumes git 2.8.2 will get support for the
switch.
git 2.8.1 (or perhaps 2.9.0) is going to prevent git merge from merging in
unrelated branches. Since the webapp's pairing etc features often combine
together repositories with unrelated histories, work around this behavior
change by setting GIT_MERGE_ALLOW_UNRELATED_HISTORIES when the assistant
merges.
Note though that this is not done for git annex sync's merges, so
it will follow git's default or configured behavior.
This is how direct mode does it too, and somehow, for reasons that
currently escape me, this makes git merge not care if it's run with an
empty work tree.
Rationalle: User might have hook scripts whose output they want to see.
Also, git commit output may tell the user they forgot to add a file.
The output is not too ugly when there's nothing to commit.
This makes the direct mode to v6 upgrade able to be performed in one clone
of a repository without affecting other clones, which can continue using v5
and direct mode.
This does mean that it has to write out temp files containing updated
objects for the merge. So may use more disk space, and disk IO, but that
should generally win out over needing to launch N separate
git hash-object processes.
Only reverse adjust the changes in the commit, which means that adjustments
do not need to be generally cleanly reversable.
For example, an adjustment can unlock all locked files, but does not need
to worry about files that were originally unlocked when reversing, because
it will only ever be run on files that have been changed. So, it's ok
if it locks all files when reversed, or even leaves all files as-is when
reversed.
So, it will pull and push the original branch, not the adjusted one.
And, for merging, it will use updateAdjustedBranch (not implemented yet).
Note that remaining uses of Git.Branch.current need to be checked too;
for things that should act on the original branch, and not the adjusted
branch.
