It takes a single key-value backend, rather than the unncessary and confusing list.
The old option still works if set.
Simplified some old old code too.
This commit was sponsored by Thomas Hochstein on Patreon.
Where before the "name" of a key and a backend was a string, this makes
it a concrete data type.
This is groundwork for allowing some varieties of keys to be disabled
in file2key, so git-annex won't use them at all.
Benchmarks ran in my big repo:
old git-annex info:
real 0m3.338s
user 0m3.124s
sys 0m0.244s
new git-annex info:
real 0m3.216s
user 0m3.024s
sys 0m0.220s
new git-annex find:
real 0m7.138s
user 0m6.924s
sys 0m0.252s
old git-annex find:
real 0m7.433s
user 0m7.240s
sys 0m0.232s
Surprising result; I'd have expected it to be slower since it now parses
all the key varieties. But, the parser is very simple and perhaps
sharing KeyVarieties uses less memory or something like that.
This commit was supported by the NSF-funded DataLad project.
Backend.lookupFile is changed to always fall back to catKey when
operating on a file that's not a symlink.
catKey is changed to understand pointer files, as well as annex symlinks.
Before, catKey needed a file mode witness, to be sure it was looking at a
symlink. That was complicated stuff. Now, it doesn't actually care if a
file in git is a symlink or not; in either case asking git for the content
of the file will get the pointer to the key.
This does mean that git-annex will treat a link
foo -> WORM--bar as a git-annex file, and also treats
a regular file containing annex/objects/WORM--bar as a git-annex file.
Calling catKey could make git-annex commands need to do more work than
before. This would especially be the case if a repo contained many regular
files, and only a few annexed files, as now git-annex will need to ask
git about the contents of the regular files.
The content of unstable keys can potentially be different in different
repos, so eg, resuming a chunked upload started by another repo would
corrupt data.
Needed for resuming from chunks.
Url keys are considered not stable. I considered treating url keys with a
known size as stable, but just don't feel that is enough information.
Only fsck and reinject and the test suite used the Backend, and they can
look it up as needed from the Key. This simplifies the code and also speeds
it up.
There is a small behavior change here. Before, all commands would warn when
acting on an annexed file with an unknown backend. Now, only fsck and
reinject show that warning.
SHA3 is still waiting for final standardization.
Although this is looking less likely given
https://www.cdt.org/blogs/joseph-lorenzo-hall/2409-nist-sha-3
In the meantime, cryptohash implements skein, and it's used by some of the
haskell ecosystem (for yesod sessions, IIRC), so this implementation is
likely to continue working. Also, I've talked with the cryprohash author
and he's a reasonable guy.
It makes sense to have an alternate high security hash, in case some
horrible attack is found against SHA2 tomorrow, or in case SHA3 comes out
and worst fears are realized.
I'd also like to support using skein for HMAC. But no hurry there and
a new version of cryptohash has much nicer HMAC code, so I will probably
wait until I can use that version.
This avoids commit churn by the assistant when eg,
replacing a file with a symlink.
But, just as importantly, it prevents the working tree being left with a
deleted file if git-annex, or perhaps the whole system, crashes at the
wrong time.
(It also probably avoids confusing displays in file managers.)
Refactored annex link code into nice clean new library.
Audited and dealt with calls to createSymbolicLink.
Remaining calls are all safe, because:
Annex/Link.hs: ( liftIO $ createSymbolicLink linktarget file
only when core.symlinks=true
Assistant/WebApp/Configurators/Local.hs: createSymbolicLink link link
test if symlinks can be made
Command/Fix.hs: liftIO $ createSymbolicLink link file
command only works in indirect mode
Command/FromKey.hs: liftIO $ createSymbolicLink link file
command only works in indirect mode
Command/Indirect.hs: liftIO $ createSymbolicLink l f
refuses to run if core.symlinks=false
Init.hs: createSymbolicLink f f2
test if symlinks can be made
Remote/Directory.hs: go [file] = catchBoolIO $ createSymbolicLink file f >> return True
fast key linking; catches failure to make symlink and falls back to copy
Remote/Git.hs: liftIO $ catchBoolIO $ createSymbolicLink loc file >> return True
ditto
Upgrade/V1.hs: liftIO $ createSymbolicLink link f
v1 repos could not be on a filesystem w/o symlinks
Audited and dealt with calls to readSymbolicLink.
Remaining calls are all safe, because:
Annex/Link.hs: ( liftIO $ catchMaybeIO $ readSymbolicLink file
only when core.symlinks=true
Assistant/Threads/Watcher.hs: ifM ((==) (Just link) <$> liftIO (catchMaybeIO $ readSymbolicLink file))
code that fixes real symlinks when inotify sees them
It's ok to not fix psdueo-symlinks.
Assistant/Threads/Watcher.hs: mlink <- liftIO (catchMaybeIO $ readSymbolicLink file)
ditto
Command/Fix.hs: stopUnless ((/=) (Just link) <$> liftIO (catchMaybeIO $ readSymbolicLink file)) $ do
command only works in indirect mode
Upgrade/V1.hs: getsymlink = takeFileName <$> readSymbolicLink file
v1 repos could not be on a filesystem w/o symlinks
Audited and dealt with calls to isSymbolicLink.
(Typically used with getSymbolicLinkStatus, but that is just used because
getFileStatus is not as robust; it also works on pseudolinks.)
Remaining calls are all safe, because:
Assistant/Threads/SanityChecker.hs: | isSymbolicLink s -> addsymlink file ms
only handles staging of symlinks that were somehow not staged
(might need to be updated to support pseudolinks, but this is
only a belt-and-suspenders check anyway, and I've never seen the code run)
Command/Add.hs: if isSymbolicLink s || not (isRegularFile s)
avoids adding symlinks to the annex, so not relevant
Command/Indirect.hs: | isSymbolicLink s -> void $ flip whenAnnexed f $
only allowed on systems that support symlinks
Command/Indirect.hs: whenM (liftIO $ not . isSymbolicLink <$> getSymbolicLinkStatus f) $ do
ditto
Seek.hs:notSymlink f = liftIO $ not . isSymbolicLink <$> getSymbolicLinkStatus f
used to find unlocked files, only relevant in indirect mode
Utility/FSEvents.hs: | Files.isSymbolicLink s = runhook addSymlinkHook $ Just s
Utility/FSEvents.hs: | Files.isSymbolicLink s ->
Utility/INotify.hs: | Files.isSymbolicLink s ->
Utility/INotify.hs: checkfiletype Files.isSymbolicLink addSymlinkHook f
Utility/Kqueue.hs: | Files.isSymbolicLink s = callhook addSymlinkHook (Just s) change
all above are lower-level, not relevant
Audited and dealt with calls to isSymLink.
Remaining calls are all safe, because:
Annex/Direct.hs: | isSymLink (getmode item) =
This is looking at git diff-tree objects, not files on disk
Command/Unused.hs: | isSymLink (LsTree.mode l) = do
This is looking at git ls-tree, not file on disk
Utility/FileMode.hs:isSymLink :: FileMode -> Bool
Utility/FileMode.hs:isSymLink = checkMode symbolicLinkMode
low-level
Done!!
The expensive scan uses lookupFile, but in direct mode, that doesn't work
for files that are present. So the scan was not finding things that are
present that need to be uploaded. (It did find things not present that
needed to be downloaded.)
Now lookupFile also works in direct mode. Note that it still prefers
symlinks on disk to info committed to git, in direct mode. This is
necessary to make things like Assistant.Threads.Watcher.onAddSymlink
work correctly, when given a new symlink not yet checked into git (or
replacing a file checked into git).
Now there's a Config type, that's extracted from the git config at startup.
Note that laziness means that individual config values are only looked up
and parsed on demand, and so we get implicit memoization for all of them.
So this is not only prettier and more type safe, it optimises several
places that didn't have explicit memoization before. As well as getting rid
of the ugly explicit memoization code.
Not yet done for annex.<remote>.* configuration settings.
Kqueue needs to remember which files failed to be added due to being open,
and retry them. This commit gets the data in place for such a retry thread.
Broke KeySource out into its own file, and added Eq and Ord instances
so it can be stored in a Set.
annex.ssh-options, annex.rsync-options, annex.bup-split-options.
And adjust types to avoid the bugs that broke several config settings
recently. Now "annex." prefixing is enforced at the type level.
Now gitattributes are looked up, efficiently, in only the places that
really need them, using the same approach used for cat-file.
The old CheckAttr code seemed very fragile, in the way it streamed files
through git check-attr.
I actually found that cad8824852
was still deadlocking with ghc 7.4, at the end of adding a lot of files.
This should fix that problem, and avoid future ones.
The best part is that this removes withAttrFilesInGit and withNumCopies,
which were complicated Seek methods, as well as simplfying the types
for several other Seek methods that had a Backend tupled in.
There are several places where it's assumed a key can be written on one
line. One is in the format of the .git/annex/unused files. The difficult
one is that filenames derived from keys are fed into git cat-file --batch,
which has a line based input. (And no -z option.)
So, for now it's best to block such keys being created.
Many functions took the repo as their first parameter. Changing it
consistently to be the last parameter allows doing some useful things with
currying, that reduce boilerplate.
In particular, g <- gitRepo is almost never needed now, instead
use inRepo to run an IO action in the repo, and fromRepo to get
a value from the repo.
This also provides more opportunities to use monadic and applicative
combinators.
To get old behavior, add a .gitattributes containing: * annex.backend=WORM
I feel that SHA256 is a better default for most people, as long as their
systems are fast enough that checksumming their files isn't a problem.
git-annex should default to preserving the integrity of data as well as git
does. Checksum backends also work better with editing files via
unlock/lock.
I considered just using SHA1, but since that hash is believed to be somewhat
near to being broken, and git-annex deals with large files which would be a
perfect exploit medium, I decided to go to a SHA-2 hash.
SHA512 is annoyingly long when displayed, and git-annex displays it in a
few places (and notably it is shown in ls -l), so I picked the shorter
hash. Considered SHA224 as it's even shorter, but feel it's a bit weird.
I expect git-annex will use SHA-3 at some point in the future, but
probably not soon!
Note that systems without a sha256sum (or sha256) program will fall back to
defaulting to SHA1.
The tricky part about this is that to generate a key, the file must be
present already. Worked around by adding (back) an URL key type, which
is used for addurl --fast.
