Only implemented server side, not used client side yet.
And not yet implemented for proxies/clusters, for which there's a build
warning about unhandled cases.
This is P2P protocol version 3. Probably will be the only change in that
version..
Added a dependency on clock to access a monotonic clock.
On i386-ancient, that is at version 0.2.0.0.
The error message is not displayed to the use, but this mirrors the
behavior when a regular get from a special remote fails. At least now
there is not a protocol error.
Still needs some work.
The reason that the waitv is necessary is because without it,
runNet loops back around and reads the next protocol message. But it's
not finished reading the whole bytestring yet, and so it reads some part
of it.
Working, but lots of room for improvement...
Without streaming, so there is a delay before download begins as the
file is retreived from the special remote.
And when resuming it retrieves the whole file from the special remote
*again*.
Also, if the special remote throws an exception, currently it
shows as "protocol error".
This will allow having an internal thread speaking P2P protocol,
which will be needed to support proxying to external special remotes.
No serialization is done on the internal P2P protocol of course.
When a ByteString is being exchanged, it may or may not be exactly
the length indicated by DATA. While that has to be carefully managed
for the serialized P2P protocol, here it would require buffering the
whole lazy bytestring in memory to check its length when sending,
so it's better to do length checks on the receiving side.
connRepo is only used when relaying git upload-pack and receive-pack.
That's only supposed to be used when git-annex-remotedaemon is serving
git-remote-tor-annex connections over tor. But, it was always set, and
so could be used in other places possibly.
Fixed by making connRepo optional in the P2P protocol interface.
In Command.EnableTor, it's not needed, because it only speaks the
protocol in order to check that it's able to connect back to itself via
the hidden service. So changed that to pass Nothing rather than the git
repo.
In Remote.Helper.Ssh, it's connecting to git-annex-shell p2pstdio,
so is making the requests, so will never need connRepo.
In git-annex-shell p2pstdio, it was accepting git upload-pack and
receive-pack requests over the P2P protocol, even though nothing sent
them. This is arguably a security hole, particularly if the user has
set environment variables like GIT_ANNEX_SHELL_LIMITED to prevent
git push/pull via git-annex-shell.
Works around this bug in unix-compat:
https://github.com/jacobstanley/unix-compat/issues/56
getFileStatus and other FilePath using functions in unix-compat do not do
UNC conversion on Windows.
Made Utility.RawFilePath use convertToWindowsNativeNamespace to do the
necessary conversion on windows to support long filenames.
Audited all imports of System.PosixCompat.Files to make sure that no
functions that operate on FilePath were imported from it. Instead, use
the equvilants from Utility.RawFilePath. In particular the
re-export of that module in Common had to be removed, which led to lots
of other changes throughout the code.
The changes to Build.Configure, Build.DesktopFile, and Build.TestConfig
make Utility.Directory not be needed to build setup. And so let it use
Utility.RawFilePath, which depends on unix, which cannot be in
setup-depends.
Sponsored-by: Dartmouth College's Datalad project
This uses a DebugSelector, rather than debug levels, which will allow
for a later option like --debug-from=Process to only
see debuging about running processes.
The module name that contains the thing being debugged is used as the
DebugSelector (in most cases; does not need to be a hard and fast rule).
Debug calls were changed to add that. hslogger did not display
that first parameter to debugM, but the DebugSelector does get
displayed.
Also fastDebug will allow doing debugging in places that are used in
tight loops, with the DebugSelector coming from the Annex Reader
essentially for free. Not done yet.
Checksum as content is received from a remote git-annex repository, rather
than doing it in a second pass.
Not tested at all yet, but I imagine it will work!
Not implemented for any special remotes, and also not implemented for
copies from local remotes. It may be that, for local remotes, it will
suffice to use rsync, rely on its checksumming, and simply return Verified.
(It would still make a checksumming pass when cp is used for COW, I guess.)
9cb250f7be got the ones in RawFilePath,
but there were others that used the one from unix-compat, which fails at
runtime on windows. To avoid this,
import System.PosixCompat.Files hiding removeLink
This commit was sponsored by Ethan Aubin.
nukeFile replaced with removeWhenExistsWith removeLink, which allows
using RawFilePath. Utility.Directory cannot use RawFilePath since setup
does not depend on posix.
This commit was sponsored by Graham Spencer on Patreon.
Clean build under ghc 8.8.3, which seems to do better at finding cases
where two imports both provide the same symbol, and warns about one of
them.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
Same goal as b18fb1e343 but without
breaking backwards compatability. Just return IO exceptions when running
the P2P protocol, so that git-annex-shell can detect eof and avoid the
ugly message.
This commit was sponsored by Ethan Aubin.
This reverts commit b18fb1e343.
That broke support for old git-annex-shell before p2pstdio was added.
The immediate problem is that postAuth had a fallthrough case
that sent an error back to the peer, but sending an error back when the
connection is closed is surely not going to work.
But thinking about it some more, making every function that uses receiveMessage
need to handle ProtocolEOF adds a lot of complication, so I don't want
to do that.
The commit only cleaned up the test suite output a tiny bit, so I'm just
gonna revert it for now.
Avoids "git-annex-shell: <stdin>: hGetChar: end of file"
being displayed by the test suite, due to the way it
runs git-annex-shell without using ssh.
git-annex-shell over ssh was not affected because git-annex hangs up the
ssh connection and so never sees the error message that git-annnex-shell
probably did emit.
This commit was sponsored by Ryan Newton on Patreon.
Unfortunately ReceiveMessage didn't handle unknown messages the way it
was documented to; client sending VERSION would cause the server to
return an ERROR and hang up. Fixed that, but old releases of git-annex
use the P2P protocol for tor and will still have that behavior.
So, version is not negotiated for Remote.P2P connections, only for
Remote.Git connections, which will support VERSION from their first
release. There will need to be a later flag day to change Remote.P2P;
left a commented out line that is the only thing that will need to be
changed then.
Version 1 of the P2P protocol is not implemented yet, but updated
the docs for the DATA change that will be allowed by that version.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
Much like Remote.P2P, there's a pool of connections to a peer, in order
to support concurrent operations.
Deals with old git-annex-ssh on the remote that does not support p2pstdio,
by only trying once to use it, and remembering if it's not supported.
Made p2pstdio send an AUTH_SUCCESS with its uuid, which serves the dual
purposes of something to detect to see that the connection is working,
and a way to verify that it's connected to the right uuid.
(There's a redundant uuid check since the uuid field is sent
by git_annex_shell, but I anticipate that being removed later when
the legacy git-annex-shell stuff gets removed.)
Not entirely happy with Remote.Git.runSsh's behavior
when the proto action fails. Running the fallback will work ok, but what
will we do when the fallbacks later get removed? It might be better to
try to reconnect, in case the connection got closed.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Not yet used by git-annex, but this will allow faster transfers etc than
using individual ssh connections and rsync.
Not called git-annex-shell p2p, because git-annex p2p does something
else and I don't want two subcommands with the same name between the two
for sanity reasons.
This commit was sponsored by Øyvind Andersen Holm.
This way we know that after enable-tor, the tor hidden service is fully
published and working, and so there should be no problems with it at
pairing time.
It has to start up its own temporary listener on the hidden service. It
would be nice to have it start the remotedaemon running, so that extra
step is not needed afterwards. But, there may already be a remotedaemon
running, in communication with the assistant and we don't want to start
another one. I thought about trying to HUP any running remotedaemon, but
Windows does not make it easy to do that. In any case, having the user
start the remotedaemon themselves lets them know it needs to be running
to serve the hidden service.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
The attacker could just send a very lot of data, with no \n and it would
all be buffered in memory until the kernel killed git-annex or perhaps OOM
killed some other more valuable process.
This is a low impact security hole, only affecting communication between
local git-annex and git-annex-shell on the remote system. (With either
able to be the attacker). Only those with the right ssh key can do it. And,
there are probably lots of ways to construct git repositories that make git
use a lot of memory in various ways, which would have similar impact as
this attack.
The fix in P2P/IO.hs would have been higher impact, if it had made it to a
released version, since it would have allowed DOSing the tor hidden
service without needing to authenticate.
(The LockContent and NotifyChanges instances may not be really
exploitable; since the line is read and ignored, it probably gets read
lazily and does not end up staying buffered in memory.)
The switch to hGetMetered subtly changed the laziness of how DATA was
read, and broke git protocol relaying. Fix by sending received data to
the git process's stdin immediately, which ensures that the lazy
bytestring is all read from the peer before going on to process the next
message from the peer.
Display progress meter on send and receive from remote.
Added a new hGetMetered that can read an exact number of bytes (or
less), updating a meter as it goes.
This commit was sponsored by Andreas on Patreon.
It's possible, in direct or thin mode, that an object file gets
truncated or appended to as it's being sent. This would break the
protocol badly, so make sure never to send too many bytes, and to
close the protocol connection if too few bytes are available.
