Only turning it off when the criterion library is not installed.
Not enabled for osx or i386ancient yet since that will need some
invesitgation to update their respective stack.yaml files.
So these special remotes are always supported.
IIRC these build flags were added because the dep chains were a bit too
long, or perhaps because the libraries were not available in Debian stable,
or something like that. That was long ago, those reasons no longer apply,
and users get confused when builtin special remotes are not available, so
it seems best to remove the build flags now.
If this does cause a problem it can be reverted of course..
This commit was sponsored by Jochen Bartl on Patreon.
"http" was too generic and easy to confuse with web. The new name makes
clear it's used in addition to some other remote. And other protocols
can use the same naming scheme.
This adds a dep on hashable, but it's a free dependency, since
unordered-containers already pulled it in.
Using unordered-containers for the set seems to make sense, since it
hashes and bloom filter hashes too. (Though different hashes.)
I dunno, never quite know if I should use unordered-containers or containers.
Otherwise use the vendored copy as before.
The library is in Debian testing but not stable. Once it reaches
stable, the vendored copy can be removed.
Did not add it to debian/control because IIRC that's used to build
git-annex on stable too, possibly. However, the Debian maintainer will
probably want to make the package depend on libghc-http-client-restricted-dev
This commit was sponsored by Ilya Shlyakhter on Patreon.
Otherwise use the vendored copy as before.
The library is in Debian testing but not stable. Once it reaches
stable, the vendored copy can be removed.
Did not add it to debian/control because IIRC that's used to build
git-annex on stable too, possibly. However, the Debian maintainer will
probably want to make the package depend on libghc-git-lfs-dev.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Network.HTTP.Client exports makeConnection since 0.5.3.
Debian stable has a newer version than 0.5.3, so bumping the
min version seems better than adding an ifdef.
Remove old code that can be trivially implemented using async in a much
nicer way (that is async exception safe).
I've audited all forkOS calls (except for ones in the assistant),
and this was the last remaining one that is not async exception safe.
The rest look ok to me.
Try to enable special remotes configured with autoenable=yes when git-annex
auto-initialization happens in a new clone of an existing repo. Previously,
git-annex init had to be explicitly run to enable them. That was a bit of a
wart of a special case for users to need to keep in mind.
Special remotes cannot display anything when autoenabled this way, to avoid
interfering with the output of git-annex query commands.
Any error messages will be hidden, and if it fails, nothing is displayed.
The user will realize the remote isn't enable when they try to use it,
and can run git-annex init manually then to try the autoenable again and
see what failed.
That seems like a reasonable approach, and it's less complicated than
communicating something across a pipe in order to display it as a side
message. Other reason not to do that is that, if the first command the
user runs is one like git-annex find that has machine readable output,
any message about autoenable failing would need to not be displayed anyway.
So better to not display a failure message ever, for consistency.
(Had to split out Remote.List.Util to avoid an import cycle.)
* addurl --preserve-filename: New option, uses server-provided filename
without any sanitization, but with some security checking.
Not yet implemented for remotes other than the web.
* addurl, importfeed: Avoid adding filenames with leading '.', instead
it will be replaced with '_'.
This might be considered a security fix, but a CVE seems unwattanted.
It was possible for addurl to create a dotfile, which could change
behavior of some program. It was also possible for a web server to say
the file name was ".git" or "foo/.git". That would not overrwrite the
.git directory, but would cause addurl to fail; of course git won't
add "foo/.git".
sanitizeFilePath is too opinionated to remain in Utility, so moved it.
The changes to mkSafeFilePath are because it used sanitizeFilePath.
In particular:
isDrive will never succeed, because "c:" gets munged to "c_"
".." gets sanitized now
".git" gets sanitized now
It will never be null, because sanitizeFilePath keeps the length
the same, and splitDirectories never returns a null path.
Also, on the off chance a web server suggests a filename of "",
ignore that, rather than trying to save to such a filename, which would
fail in some way.
Extensions got renamed.
Default-Language is required. I had to put Haskell98 because there are
subtle differences between 98 and 2010 and git-annex has always been
built with the default, which was 98 when there was a default. I don't
know how to establish that git-annex will behave the same under 2010.
Avoid running a large number of git cat-file child processes when run with
a large -J value.
This implementation takes care to avoid adding any overhead to git-annex
when run without -J. When run with -J, there is a small bit of added
overhead, to manipulate the resource pool. That optimisation added a
fair bit of complexity.
This does mean that RemoteDaemon.Transport.Tor's call runs it, otherwise
no change, but this is groundwork for doing more such expensive actions
in dupState.
This was very susprising to me that it was not caught by -Wall, so I
enabled -Wincomplete-uni-patterns to catch such things. It found a
second one just lines above, but no others anywhere.
Remote now contains a ParsedRemoteConfig. The parsing happens when the
Remote is constructed, rather than when individual configs are used.
This is more efficient, and it lets initremote/enableremote
reject configs that have unknown fields or unparsable values.
It also allows for improved type safety, as shown in
Remote.Helper.Encryptable where things that used to match on string
configs now match on data types.
This is a work in progress, it does not build yet.
The main risk in this conversion is forgetting to add a field to
RemoteConfigParser. That will prevent using that field with
initremote/enableremote, and will prevent remotes that already are set
up from seeing that configuration. So will need to check carefully that
every field that getRemoteConfigValue is called on has been added to
RemoteConfigParser.
(One such case I need to remember is that credPairRemoteField needs to be
included in the RemoteConfigParser.)
This is a first step toward that goal, using the ProposedAccepted type
in RemoteConfig lets initremote/enableremote reject bad parameters that
were passed in a remote's configuration, while avoiding enableremote
rejecting bad parameters that have already been stored in remote.log
This does not eliminate every place where a remote config is parsed and a
default value is used if the parse false. But, I did fix several
things that expected foo=yes/no and so confusingly accepted foo=true but
treated it like foo=no. There are still some fields that are parsed with
yesNo but not not checked when initializing a remote, and there are other
fields that are parsed in other ways and not checked when initializing a
remote.
This also lays groundwork for rejecting unknown/typoed config keys.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
Since the sqlite branch uses blobs extensively, there are some
performance benefits, ByteStrings now get stored and retrieved w/o
conversion in some cases like in Database.Export.
File mode is octal not decimal. This broke in the conversion to
attoparsec.
(I've submitted the content of Utility.Attoparsec to the attoparsec
developers.)
Test suite passes 100% now.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
Goal is to make git-annex faster by using ByteString for all the
worktree traversal. For now, this is focusing on Command.Find,
in order to benchmark how much it helps. (All other commands are
temporarily disabled)
Currently in a very bad unbuildable in-between state.
Renamed the database to .git/annex/keysdb;
the old .git/annex/keys gets deleted during the upgrade.
It is possible that an old git-annex process is running during the
upgrade. If so, it will be able to continue using the old keys db until the
upgrade is complete, and then will presumably fail in some ugly way. Or
perhaps the upgrade will be unable to delete the open files on some
systems, and so fail with an ugly error message.
It's also possible for multiple processes to be running the upgrade
concurrently. That should be fine; they will both write the same
information into the keys db.
Other databases still need to be upgraded.
Rescued from commit 11d6e2e260 which removed
db benchmarks in favor of benchmarking arbitrary git-annex commands. Which
is nice and general, but microbenchmarks are useful too.
It would have been a lot less round-about to just make git annex dead
also add the uuids of sameas remotes to the trust.log as dead.
But, that would fail in the case where there's an unmerged other clone
that has a sameas remote that the current repo does not know about.
Then it would not get marked as dead.
Handling it at transition time avoids that scenario.
Note that the generation of trustmap' in dropDead should only
happen once, due to the partial application.
This solves the problem of sameas remotes trampling over per-remote
state. Used for:
* per-remote state, of course
* per-remote metadata, also of course
* per-remote content identifiers, because two remote implementations
could in theory generate the same content identifier for two different
peices of content
While chunk logs are per-remote data, they don't use this, because the
number and size of chunks stored is a common property across sameas
remotes.
External special remote had a complication, where it was theoretically
possible for a remote to send SETSTATE or GETSTATE during INITREMOTE or
EXPORTSUPPORTED. Since the uuid of the remote is typically generate in
Remote.setup, it would only be possible to pass a Maybe
RemoteStateHandle into it, and it would otherwise have to construct its
own. Rather than go that route, I decided to send an ERROR in this case.
It seems unlikely that any existing external special remote will be
affected. They would have to make up a git-annex key, and set state for
some reason during INITREMOTE. I can imagine such a hack, but it doesn't
seem worth complicating the code in such an ugly way to support it.
Unfortunately, both TestRemote and Annex.Import needed the Remote
to have a new field added that holds its RemoteStateHandle.
I found a way to avoid inheritance complicating anything outside of
Logs.Remote. It seems fine to require all inherited values to be
inherited and not set in the sameas remote's config. Since inherited
values will be used for stuff like encryption and perhaps chunking, which
control the actual content stored on the remote, it seems likely that
there will not be any reason to need them to vary between two remotes
that access the same underlying data store.
The newer version of containers is free; the minimum ghc version is
bundled with a newer version than that.
Initremote sets that, so after both initremote and enableremote,
the git config will be set.
Any remote that does not use Annex.SpecialRemote won't set
annex-config-uuid. But that's only Remote.Git, which doesn't use
RemoteConfig anyway.
Had a report of close throwing ErrorBusy on CIFS.
Retrying up to 16 seconds is a balance between hopefully waiting long
enough for the problem to clear up and waiting so long that git-annex seems
to hang.
The new dependency is free; persistent depends on unliftio-core.
This is a special remote and a git remote at the same time; git can pull
and push to it and git-annex can use it as a special remote.
Remote.Git has to check if it's configured as a git-lfs special remote
and sets it up as one if so.
Object methods not implemented yet.
In 40ecf58d4b I changed the license of code I
wrote from GPL to AGPL. But, two files containing code I wrote combined
with code by others were updated to say their license is AGPL, while in
fact part of it was (the code I wrote) but part remained under the original
license (the code written by others).
Remote/Ddar.hs is now changed entirely back to GPL 3.
Annex/DirHashes.hs stays AGPL, but I broke out Utility/MD5.hs with the code
not written by me, and corrected its license statement to GPL-2, which
is the actual version of the GPL included with the code in its original
distribution at http://www.cs.ox.ac.uk/people/ian.lynagh/md5/
Drop support for building with ghc older than 8.4.4, and with older
versions of serveral haskell libraries than will be included in Debian 10.
The only remaining version ifdefs in the entire code base are now a couple
for aws!
This commit should only be merged after the Debian 10 release.
And perhaps it will need to wait longer than that; it would make
backporting new versions of git-annex to Debian 9 (stretch) which
has been actively happening as recently as this year.
This commit was sponsored by Ilya Shlyakhter.
The hash was actually not being fully evaluated before, used rnf to fix
that.
The added dependency on deepseq is a free dependency, because eg text
depends on it.
* Added mimeencoding= term to annex.largefiles expressions.
This is probably mostly useful to match non-text files with eg
"mimeencoding=binary"
* git-annex matchexpression: Added --mimeencoding option.
Added graftTree but it's buggy.
Should use graftTree in Annex.Branch.graftTreeish; it will be faster
than the current implementation there.
Started Annex.Import, but untested and it doesn't yet handle tree
grafting.
Does not yet have a way to update with new information from the
git-annex branch, which will be needed when multiple repos are importing
from the same remote.
List all current AGPL files in COPYRIGHT; several that were GPL have had
new AGPL code added.
In git-annex.cabal, use AGPL-3 as the overall license, since it's not
possible to build git-annex without AGPL code anymore.
Like with the network-uri split, cabal will automatically turn off the flag
when building with an old network.
I have not tested building with the new network-3.0.0.0 yet; several
other dependencies including aws are still pinned on network-2.*
* webapp: Remove configurator for box.com repository, since their
webdav support is going away at the end of this January.
* webapp: Remove configurator for gitlab, which stopped supporting git-annex
some time ago.
This commit was sponsored by Brock Spratlen on Patreon.
* Switch to using .git/annex/othertmp for tmp files other than partial
downloads, and make stale files left in that directory when git-annex
is interrupted be cleaned up promptly by subsequent git-annex processes.
* The .git/annex/misctmp directory is no longer used and git-annex will
delete anything lingering in there after it's 1 week old.
Also, in Annex.Ingest, made the filename it uses in the tmp dir be
prefixed with "ingest-" to avoid potentially using a filename used by
some other code.
Now there's a ByteString used all the way from disk to Key.
The main complication in this conversion was the use of fromInternalGitPath
in several places to munge things on Windows. The things that used that
were changed to parse the ByteString using either path separator.
Also some code that had read from files to a String lazily was changed
to read a minimal strict ByteString.
Install new git hooks in this version.
This does beg the question of what to do if git later gets eg a
post-smudge hook, that could run git-annex smudge --update. I think the
thing to do in that case would be to make git-annex smudge --update
install the new hooks. That way, as the user uses git-annex, the hook
would be created pretty quickly and without needing any extra syscalls
except for when git-annex smudge --update is called.
I considered doing something like that for installation of the
post-checkout and post-merge hooks, which would have avoided the need
for v7. But the only place it was cheap to do it would be in git-annex smudge
which could cheaply notice that smudge.log didn't exist yet and so know
the hooks needed to be installed. But since smudge used to populate pointer
files, it would be quite surprising if a single git checkout/merge failed
to update the work tree, and so that idea didn't work out.
The other reason for v7 is psychological -- users don't need to worry
about whether they might be running an old version of git-annex that
doesn't support their v7 repository very well. And bug reports about
"v6" have gotten a bit of a bad association in my head since they often
hit one of the known limitations and didn't realize it was experimental.
newtyped RepoVersion Int to avoid needing 2 comparisons in
versionSupportsUnlockedPointers etc. Also it's just nicer.
This commit was sponsored by John Pellman on Patreon.
The smuge filter no longer provides git with annexed file content, to
avoid a git memory leak, and because that did not honor annex.thin.
git annex smudge --update has to be run after a checkout to update
unlocked files in the working tree with annexed file contents.
No hooks yet to run it.
This commit was sponsored by Nick Piper on Patreon.
Both Command.Sync and Annex.Ingest had their own versions of this.
The one in Annex.Ingest used Git.Branch.currentUnsafe, but does not seem
to need it. That is only checking to see if it's in an adjusted unlocked
branch, and when in an adjusted branch, the branch does in fact exist,
so the added check that Git.Branch.current does is fine.
This commit was sponsored by Denis Dzyubenko on Patreon.
Running git-annex linux builds in termux seems to work well enough that the
only reason to keep the Android app would be to support Android 4-5, which
the old Android app supported, and which I don't know if the termux method
works on (although I see no reason why it would not).
According to [1], Android 4-5 remains on around 29% of devices, down from
51% one year ago.
[1] https://www.statista.com/statistics/271774/share-of-android-platforms-on-mobile-devices-with-android-os/
This is a rather large commit, but mostly very straightfoward removal of
android ifdefs and patches and associated cruft.
Also, removed support for building with very old ghc < 8.0.1, and with
yesod < 1.4.3, and without concurrent-output, which were only being used
by the cross build.
Some documentation specific to the Android app (screenshots etc) needs
to be updated still.
This commit was sponsored by Brett Eisenberg on Patreon.
