Windows needs the setenv package in custom-setup, but I don't want to
pull it in on unix, which would probably break some builds and need more
work. Instead, split out setEnv to a separate module.
Quite likely, unix-compat will get a portable environment layer, and
then both modules can be removed from here.
This commit was sponsored by Øyvind Andersen Holm.
Now that windows is using unix-compat 0.5, don't need a dep on Win32
or unix in custom-setup, so the stanza can be parsed by cabal's limited
parser again.
Note that unix-compat 0.5 is needed on windows, but the cabal file
hasn't bumped it yet, since that would necessarily affect non-windows
builds. Instead, the stack-windows.yaml makes sure the right version is
pulled in.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
That version has my patches for the problems that Utility.PosixFiles
was working around, so am able to get rid of that module now.
This will later allow bringing back the custom-setup stanza in the cabal
file. It will need to depend on unix-compat 0.5 on all OS's, which I'm
not ready to do yet.
This commit was sponsored by Nick Daly on Patreon.
Get ugly reversion out of CHANGELOG.
Also, relocated the windows stack.yaml to top, and updated windows build
instructions.
This commit was sponsored by Henrik Riomar on Patreon.
This reverts commit 839ec7e26c.
Neither way is working.. The other way failed:
.stack-work\dist\5f9bc736\build\git-annex\git-annex-tmp\Assistant.o:fake:(.text+0x6bb3): undefined reference to `terminatepid'
Seems that winprocess.c is not getting linked in.
Building with stack, it failed:
`_TerminateProcess' referenced in section `.text' of .stack-work\dist\5f9bc736\build\git-annex\git-annex-tmp\Utility\WinProcess.o: defined in discarded section `.text' of C:/Users/jenkins/AppData/Local/Programs/stack/i386-windows/ghc-8.0.2/mingw/bin/../lib/gcc/i686-w64-mingw32/5.2.0/../../../../i686-w64-mingw32/lib/../lib/libkernel32.a(dacgs01154.o)
This is a reversion of 86e638567a,
to try the other way to implement it, which will hopefully avoid the problem.
This needs to include unix except on windows, but when I tried
an if (! os(windows)) cabal crashed:
'parseField' called on a non-field. This is possibly a bug in Cabal.
Cabal is able to configure w/o the custom-setup stanza, so omit it.
This reverts commit ffa81d2d7f.
Old win32-extras fails to install. I suspect toolchain breakage because
a lot of stuff is failing on the windows autobuilder.
This is similar to the pusher thread, but a separate thread because git
pushes can be done in parallel with exports, and updating a big export
should not prevent other git pushes going out in the meantime.
The exportThread only runs at most every 30 seconds, since updating an
export is more expensive than pushing. This may need to be tuned.
Added a separate channel for export commits; the committer records a
commit in that channel.
Also, reconnectRemotes records a dummy commit, to make the exporter
thread wake up and make sure all exports are up-to-date. So,
connecting a drive with a directory special remote export will
immediately update it, and getting online will automatically
update S3 and WebDAV exports.
The transfer queue is not involved in exports. Instead, failed
exports are retried much like failed pushes.
This commit was sponsored by Ewen McNeill.
New table needed to look up what filenames are used in the currently
exported tree, for reasons explained in export.mdwn.
Also, added smart constructors for ExportLocation and ExportDirectory to
make sure they contain filepaths with the right direction slashes.
And some code refactoring.
This commit was sponsored by Francois Marier on Patreon.
Went with a separate db per export remote, rather than a single export
database. Mostly because there will probably not be a lot of separate
export remotes, and it might be convenient to be able to delete a given
remote's export database.
This commit was supported by the NSF-funded DataLad project.
This will allow disabling exports for remotes that are not configured to
allow them. Also, exportSupported will be useful for the external
special remote to probe.
This commit was supported by the NSF-funded DataLad project
https://github.com/haskell/cabal/issues/4655
This means that when a module is conditionally imported via ifdef
depending on the OS or build flags, the cabal file has to mirror the
same logic there to only list the module then.
Since there are lots of OS's and lots of combinations of build flags
here, it's rather difficult to know if the cabal file has been completelty
correctly updated to match the source code.
So I am very unhappy with needing to update things in two places. I've
only tested this on linux with most build flags enables; this will
probably need significant time and testing to catch every cabal file
tweak that this change to Cabal requires. And it will be a continual
source of compile failures going forward when the code is modified and
the cabal file not also updated.
DRY DRY DRY, I repeat myself, but: DRY! Sigh..
(Also, had to remove all Build.* that are standalone programs from the
Other-Modules list, because since cabal passes those modules to ghc when
building git-annex, it complains that they use module Main. Those
modules are only used when building with the Makefile anyway, so this
change shouldn't break anything.)
This commit was sponsored by Thomas Hochstein on Patreon.
Security fix: Disallow hostname starting with a dash, which would get
passed to ssh and be treated an option. This could be used by an attacker
who provides a crafted ssh url (for eg a git remote) to execute arbitrary
code via ssh -oProxyCommand.
No CVE has yet been assigned for this hole.
The same class of security hole recently affected git itself,
CVE-2017-1000117.
Method: Identified all places where ssh is run, by git grep '"ssh"'
Converted them all to use a SshHost, if they did not already, for
specifying the hostname.
SshHost was made a data type with a smart constructor, which rejects
hostnames starting with '-'.
Note that git-annex already contains extensive use of Utility.SafeCommand,
which fixes a similar class of problem where a filename starting with a
dash gets passed to a program which treats it as an option.
This commit was sponsored by Jochen Bartl on Patreon.
Added remote configuration settings annex-ignore-command and
annex-sync-command, which are dynamic equivilants of the annex-ignore
and annex-sync configurations.
For this I needed a new DynamicConfig infrastructure. Its implementation
should be as fast as before when there is no dynamic config, and it caches
so shell commands are only run once.
Note that annex-ignore-command exits nonzero when the remote should be ignored.
While that may seem backwards, it allows using the same command for it as
for annex-sync-command when you want to disable both.
This commit was sponsored by Trenton Cronholm on Patreon.
Can be used to override the default timestamps used in log files in the
git-annex branch. This is a dangerous environment variable; use with
caution.
Note that this only affects writing to the logs on the git-annex branch.
It is not used for metadata in git commits (other env vars can be set for
that).
There are many other places where timestamps are still used, that don't
get committed to git, but do touch disk. Including regular timestamps
of files, and timestamps embedded in some files in .git/annex/, including
the last fsck timestamp and timestamps in transfer log files.
A good way to find such things in git-annex is to get for getPOSIXTime and
getCurrentTime, although some of the results are of course false positives
that never hit disk (unless git-annex gets swapped out..)
So this commit does NOT necessarily make git-annex comply with some HIPPA
privacy regulations; it's up to the user to determine if they can use it in
a way compliant with such regulations.
Benchmarking: It takes 0.00114 milliseconds to call getEnv
"GIT_ANNEX_VECTOR_CLOCK" when that env var is not set. So, 100 thousand log
files can be written with an added overhead of only 0.114 seconds. That
should be by far swamped by the actual overhead of writing the log files
and making the commit containing them.
This commit was supported by the NSF-funded DataLad project.
Removed dependency on MissingH, instead depending on the split
library.
After laying groundwork for this since 2015, it
was mostly straightforward. Added Utility.Tuple and
Utility.Split. Eyeballed System.Path.WildMatch while implementing
the same thing.
Since MissingH's progress meter display was being used, I re-implemented
my own. Bonus: Now progress is displayed for transfers of files of
unknown size.
This commit was sponsored by Shane-o on Patreon.
Cryptonite is faster and allocates less, and I want to get rid of
MissingH use.
Note that the new dependency on memory is free; it's a dependency of
cryptonite.
This commit was supported by the NSF-funded DataLad project.
They are handled close the same as they are by git. However, unlike git,
git-annex sometimes needs to pass the -n parameter when using these.
So, this has the potential for breaking some setup, and perhaps there ought
to be a ANNEX_USE_GIT_SSH=1 needed to use these. But I'd rather avoid that
if possible, so let's see if anyone complains.
Almost all places where "ssh" was run have been changed to support the env
vars. Anything still calling sshOptions does not support them. In
particular, rsync special remotes don't. Seems that annex-rsync-transport
already gives sufficient control there.
(Fixed in passing: Remote.Helper.Ssh.toRepo used to extract
remoteAnnexSshOptions and pass them to sshOptions, which was redundant
since sshOptions also extracts those.)
This commit was sponsored by Jeff Goeke-Smith on Patreon.
sync: When syncing with a local repository located on a crippled
filesystem, run the post-receive hook there, since it wouldn't get run
otherwise. This makes pushing to repos on FAT-formatted removable drives
update them when receive.denyCurrentBranch=updateInstead.
Made Remote.Git export onLocal, which was cleaned up to not have so many
caveats about its use.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
* Added post-recieve hook, which makes updateInstead work with direct
mode and adjusted branches.
* init: Set up the post-receive hook.
This commit was sponsored by Fernando Jimenez on Patreon.
Refactored some common code into initDb.
This only deals with the problem when creating new databases. If a repo
got bad permissions into it, it's up to the user to deal with it.
This commit was sponsored by Ole-Morten Duesund on Patreon.
... to control the default behavior in all clones of a repository.
This includes a new Configurable data type, so the GitConfig type indicates
which values can be configured this way.
The implementation should be quite efficient; the config log is only read
once, and only when a Configurable value has not already been set by
git-config.
Indeed, it would be nice in the future to extend this, so that git-config
is itself only read on demand. Some commands may not need to look at the
git configuration at all.
This commit was sponsored by Trenton Cronholm on Patreon.
This interacts with it using stdio, which is surprisingly hard.
sendFile does not currently work, due to
https://github.com/warner/magic-wormhole/issues/108
Parsing the output to find the magic code is done as robustly as
possible, and should continue to work unless wormhole radically changes
the format of its codes. Presumably it will never output something that
looks like a wormhole code before the actual wormhole code; that would
also break this. It would be better if there was a way to make
wormhole not mix the code with other output, as requested in
https://github.com/warner/magic-wormhole/issues/104
Only exchange of files/directories is supported. To exchange messages,
https://github.com/warner/magic-wormhole/issues/99 would need to be resolved.
I don't need message exchange however.
Added to change notification to P2P protocol.
Switched to a TBChan so that a single long-running thread can be
started, and serve perhaps intermittent requests for change
notifications, without buffering all changes in memory.
The P2P runner currently starts up a new thread each times it waits
for a change, but that should allow later reusing a thread. Although
each connection from a peer will still need a new watcher thread to run.
The dependency on stm-chans is more or less free; some stuff in yesod
uses it, so it was already indirectly pulled in when building with the
webapp.
This commit was sponsored by Francois Marier on Patreon.
Similar to GCrypt remotes, P2P remotes have an url, so Remote.Git has to
separate them out and handle them, passing off to Remote.P2P.
This commit was sponsored by Ignacio on Patreon.
Each worker thread needs to run in the Annex monad, but the
remote-daemon's liftAnnex can only run 1 action at a time. Used
Annex.Concurrent to deal with that.
P2P.Annex is incomplete as of yet.
Almost working, but there's a bug in the relaying.
Also, made tor hidden service setup pick a random port, to make it harder
to port scan.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
This is most of the way to having the p2p protocol working over tor
hidden services, at least enough to do git push/pull.
The free monad was split into two, one for network operations and the
other for local (Annex) operations. This will allow git-remote-tor-annex
to run only an IO action, not needing the Annex monad.
This commit was sponsored by Remy van Elst on Patreon.
For use with tor hidden services, and perhaps other transports later.
Based on Utility.SimpleProtocol, it's a line-based protocol,
interspersed with transfers of bytestrings of a specified size.
Implementation of the local and remote sides of the protocol is done
using a free monad. This lets monadic code be included here, without
tying it to any particular way to get bytes peer-to-peer.
This adds a dependency on the haskell package "free", although that
was probably pulled in transitively from other dependencies already.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
git-annex.cabal: Loosen bounds on persistent to allow 2.5, which on Debian
has been patched to work with esqueleto. This may break cabal's resolver on
non-Debian systems; if so, either use stack to build, or run cabal with
--constraint='persistent ==2.2.4.1' Hopefully this mess with esqueleto will
be resolved soon.
https://github.com/prowdsponsor/esqueleto/issues/137
I've long considered the XMPP support in git-annex a wart.
It's nice to remove it.
(This also removes the NetMessager, which was only used for XMPP, and the
daemonstatus's desynced list (likewise).)
Existing XMPP remotes should be ignored by git-annex.
This commit was sponsored by Brock Spratlen on Patreon.
Tor unfortunately does not come out of the box configured to let hidden
services register themselves on the fly via the ControlPort.
And, changing the config to enable the ControlPort and a particular type
of auth for it may break something already using the ControlPort, or
lessen the security of the system.
So, this leaves only one option to us: Add a hidden service to the
torrc. git-annex enable-tor does so, and picks an unused high port for
tor to listen on for connections to the hidden service.
It's up to the caller to somehow pick a local port to listen on
that won't be used by something else. That may be difficult to do..
This commit was sponsored by Jochen Bartl on Patreon.
This gets rid of quite a lot of ugly hacks around json generation.
I doubt that any real-world json parsers can parse incomplete objects, so
while it's not as nice to need to wait for the complete object, especially
for commands like `git annex info` that take a while, it doesn't seem worth
the added complexity.
This also causes the order of fields within the json objects to be
reordered. Since any real json parser shouldn't care, the only possible
problem would be with ad-hoc parsers of the old json output.
This makes -Jn work with --json and --quiet, where before
setting -Jn disabled those options.
Concurrent json output is currently a mess though since threads output
chunks over top of one-another.
Simplify Solver's task by requesting version 2.2.4.1 of the persistent
package instead of just providing the persistent < 2.5 constraint.
With only the persistent < 2.5 constraint, and with --flags=s3\ webapp
and --max-backjumps=10000, CI timed out after two hours with Solver
still trying to find a solution.
This is a follow-up to 18e458db, since there's been a regression in the
situation between 6.20160619 and 6.20160808, probably simply because
Hackage is a moving target.
Use nextRandom to generate the random UUID, rather than using randomIO.
This gets fixes for the following two bugs in the uuid library.
However, this did not impact git-annex much, so a hard depedency has
not been added on uuid-1.3.12.
https://github.com/aslatter/uuid/issues/15
"v4 UUIDs are not that random"
This doesn't greatly affect git-annex, because even with only
2^64 possible UUIDs, the chance that two git-annex repositories
that are clones of the same git repo get the same UUID is miniscule.
And, git-annex generates only one UUID per run, so preducting
subsequent UUIDs is not a problem.
https://github.com/aslatter/uuid/issues/16
"Remove Random instance for UUID, or mark it as deprecated"
git-annex was using that instance; let's stop before it gets
deprecated or removed.
metadata --json output format has changed, adding a inner json object
named "fields" which contains only the fields and their values.
This should be easier to parse than the old format, which mixed up
metadata fields with other keys in the json object.
Any consumers of the old format will need to be updated.
This adds a dependency on unordered-containers for parsing MetaData
from JSON, but it's a free dependency; aeson pulls in that library.
This actually runs faster than building the man pages from the makefile
did. But the main purpose is to let Setup.hs import Build.Mans and so not
need the makefile.
The tarball on hackage will include only the files needed for cabal install;
it is NOT the full git-annex source tree. While it's totally obnoxious that
cabal files need every file listed out when basic wildcard support could
avoid hundreds of lines, and have to be maintained when files are added,
this does get the tarball size back down to 1 mb.
This also stops stack from complaining that it found modules not listed in
the cabal file.
debian/changelog, debian/NEWS, debian/copyright: Converted to symlinks
to CHANGELOG, NEWS, and COPYRIGHT, which used to symlink to these instead.
This avoids needing to include debian/ in the hackage tarball.
Setup.hs: Build man pages at install time using make and mdwn2man.
If it fails, which it probably will on windows, just skip installing
them.
According to https://github.com/redneb/disk-free-space/issues/3 ,
disk-free-space should be at least as portable as my homegrown code was.
One change I noticed is, getDiskSize was not implemented for windows
in the old code, and should work now.
