The hoary old HTTP library was only used when checking if an url exists,
when curl was not available. It had many problems, including not supporting
https at all.
Now, this is done using http-conduit for all urls that it supports. Falls
back to curl for any url that http-conduit doesn't like (probably ftp etc,
but could also be an url that its parser chokes on for whatever reason).
This adds a new dependency on http-conduit, but webdav support already
indirectly depended on that, and the s3-aws branch also uses it.
This opens up the possibility of using http-conduit for large file
downloads, but for now I've left it using wget/curl.
This commit was sponsored by Paul Tötterman.
FileID type changed, needs Arbitrary instance.
On the plus side, getFileStatus on Windows now actually gets file id's,
not always 0, so direct mode is safer there now.
Removed old extensible-exceptions, only needed for very old ghc.
Made webdav use Utility.Exception, to work after some changes in DAV's
exception handling.
Removed Annex.Exception. Mostly this was trivial, but note that
tryAnnex is replaced with tryNonAsync and catchAnnex replaced with
catchNonAsync. In theory that could be a behavior change, since the former
caught all exceptions, and the latter don't catch async exceptions.
However, in practice, nothing in the Annex monad uses async exceptions.
Grepping for throwTo and killThread only find stuff in the assistant,
which does not seem related.
Command.Add.undo is changed to accept a SomeException, and things
that use it for rollback now catch non-async exceptions, rather than
only IOExceptions.
This reaping of any processes came to cause me problems when redoing the
rsync special remote -- a gpg process that was running gets waited on and
the place that then checks its return code fails.
I cannot reproduce any zombies when using the rsync special remote.
But I still can when using a normal git remote, accessed over ssh.
There is 1 zombie per file downloaded without this horrible hack enabled.
So, move the hack to only be used in that case.
This only performs some basic tests so far; no testing of chunking or
resuming. Also, the existing encryption type of the remote is used; it
would be good later to derive an encrypted and a non-encrypted version of
the remote and test them both.
This commit was sponsored by Joseph Liu.
Some remotes like External need to run store and retrieve actions in Annex,
not IO. In order to do that lift, I had to dive pretty deep into the
utilities, making Utility.Gpg and Utility.Tmp be partly converted to using
MonadIO, and Control.Monad.Catch for exception handling.
There should be no behavior changes in this commit.
This commit was sponsored by Michael Barabanov.
Leverage the new chunked remotes to automatically resume downloads.
Sort of like rsync, although of course not as efficient since this
needs to start at a chunk boundry.
But, unlike rsync, this method will work for S3, WebDAV, external
special remotes, etc, etc. Only directory special remotes so far,
but many more soon!
This implementation will also properly handle starting a download
from one remote, interrupting, and resuming from another one, and so on.
(Resuming interrupted chunked uploads is similarly doable, although
slightly more expensive.)
This commit was sponsored by Thomas Djärv.
Not yet used by any special remotes, but should not be too hard to add it
to most of them.
storeChunks is the hairy bit! It's loosely based on
Remote.Directory.storeLegacyChunked. The object is read in using a lazy
bytestring, which is streamed though, creating chunks as needed, without
ever buffering more than 1 chunk in memory.
Getting the progress meter update to work right was also fun, since
progress meter values are absolute. Finessed by constructing an offset
meter.
This commit was sponsored by Richard Collins.
Configure crashed on systems with that process and without eg, sha256sum.
The rest of the code in configure looks to work ok, since it uses sh -c to
probe for commands, and sh is always in path so it works.
Dunno about all the rest of git-annex. Not a huge amount of external
program use, other than git, so perhaps this won't be a large pain.
Note that boolSystem can throw an exception now if the program doesn't
exist. Could easily be changed back to False.
Minor because normally only 1 FD is leaked per git-annex run. However,
the test suite leaks a few hundred FDs, and this broke it on the Debian
autobuilders, which seem to have a tigher than usual ulimit.
The leak was introduced by the lazy getDirectoryContents' that was
introduced in e6330988dd in order to scale to
millions of journal files -- if the lazy list was never fully consumed, the
directory handle did not get closed.
Instead, pull in openDirectory/readDirectory/closeDirectory code that I
already developed and submitted in a patch to the haskell directory library
earlier. Using this in journalDirty avoids the place that the lazy list
caused a problem. And using it in stageJournal eliminates the need for
getDirectoryContents'.
The getJournalFiles* functions are switched back to using the regular
strict getDirectoryContents. I'm not sure if those always consume the whole
list, so this avoids any leak. And the things that call those are things
like git annex unused, which also look at every file committed to the
git-annex branch, so would need more work to scale to insane numbers of
files anyway.
Yes, this means that git annex webapp on windows execs git-annex, which
execs itself to set env, and the execs itself again to redirect logs.
This is disgusting. This is Windows(TM).
Rather than calculating the TSDelta once, and caching it, this now
reads the inode sential file's InodeCache file once, and then each time a
new InodeCache is generated, looks at the sentinal file to get the current
delta.
This way, if the time zone changes while git-annex is running, it will
adapt.
This adds some inneffiency, but only on Windows, and only 1 stat per new
file added. The worst innefficiency is that `git annex status` and
`git annex sync` will now (on Windows) stat the inode sentinal file once per
file in the repo.
It would be more efficient to use getCurrentTimeZone, rather than needing
to stat the sentinal file. This should be easy to do, once the time
package gets my bugfix patch.
This commit was sponsored by Jürgen Lüters.
On Windows, changing the time zone causes the apparent mtime of files to
change. This confuses git-annex, which natually thinks this means the files
have actually been modified (since THAT'S WHAT A MTIME IS FOR, BILL <sheesh>).
Work around this stupidity, by using the inode sentinal file to detect if
the timezone has changed, and calculate a TSDelta, which will be applied
when generating InodeCaches.
This should add no overhead at all on unix. Indeed, I sped up a few
things slightly in the refactoring.
Seems to basically work! But it has a big known problem:
If the timezone changes while the assistant (or a long-running command)
runs, it won't notice, since it only checks the inode cache once, and
so will use the old delta for all new inode caches it generates for new
files it's added. Which will result in them seeming changed the next time
it runs.
This commit was sponsored by Vincent Demeester.
Deal with FAT's low resolution timestamps, which in combination with
Linux's caching of higher res timestamps while a FAT is mounted, caused
direct mode repositories on FAT to seem to have modified files after they
were unmounted and remounted.
This commit was sponsored by Fabrice Rossi.
This version of wai changed the type of Middleware, so I cannot seem
to liftIO inside it. So, got rid of a lot of not really needed
complexity to use System.Log.Logger's logging stuff, and just use
the standard wai stdout logger when debug logging is enabled.
Format may change some, and it logs http to stdout instead of stderr
now. Doesn't matter for the webapp since both go to the same log anyway.
This avoids ssh prompting for passwords on stdin, ever.
It may also change other behavior of other programs, as there is no
controlling terminal now. However, setsid was already done when running the
assistant in daemon mode, so any behavior changes should not be really new.
For sync, saves 1 ssh connection per remote. For remotedaemon, the same
ssh connection that is already open to run git-annex-shell notifychanges
is reused to pull from the remote.
Only potential problem is that this also enables connection caching
when the assistant syncs with a ssh remote. Including the sync it does
when a network connection has just come up. In that case, cached ssh
connections are likely to be stale, and so using them would hang.
Until I'm sure such problems have been dealt with, this commit needs to
stay on the remotecontrol branch, and not be merged to master.
This commit was sponsored by Alexandre Dupas.
Code was still buggy, it turns out (though the recursion checker caught
it). In the case of (Schedule (Monthly Nothing) AnyTime), where the last
run was on yyyy-12-31, it looped forever.
Also, the handling of (Schedule (Yearly Nothing) AnyTime) was wacky where
the last run was yyyy-12-31. It would suggest a window starting on the 3rd
for the next run (because 31 mod 28 is 3).
I think that originally I was wanted to avoid running on 01-01 if it had
just run on 12-31. But the code didn't accomplish this, and it's not
necessary anyway. This is supposed to calculate the next window meeting the
schedule, and for (Schedule (Monthly Nothing), the window starts at 01-01
and runs through 01-31. If that causes two back-to-back runs, well the next
one will not be until 02-01 at the earliest.
Also, back-to-back runs can be avoided, if desired, by using Divisible 2.
This includes checking when dropping files that any required content
configuration is satisfied. However, it does not yet include an active
check on the required content; the location log is trusted when checking
the required content expression.
Motivation: Hook scripts for nautilus or other file managers
need to provide the user with feedback that a file is being downloaded.
This commit was sponsored by THM Schoemaker.
For some reason this was working w/o a cast before, despite POSIXTime etc
being newtypes. It stopped working with the new QuickCheck:
Utility/QuickCheck.hs:31:33:
No instance for (Integral POSIXTime)
arising from a use of `arbitrarySizedIntegral'
Possible fix: add an instance declaration for (Integral POSIXTime)
In the first argument of `nonNegative', namely
`arbitrarySizedIntegral'
In the expression: nonNegative arbitrarySizedIntegral
In an equation for `arbitrary':
arbitrary = nonNegative arbitrarySizedIntegral
Debian stable's warp-tls is too old to support the new https feature well,
so only use http with that old version.
Note that the webapp still depends on warp-tls, because the TLSSettings
type is used.
(And a vpop command, which is still a bit buggy.)
Still need to do vadd and vrm, though this also adds their documentation.
Currently not very happy with the view log data serialization. I had to
lose the TDFA regexps temporarily, so I can have Read/Show instances of
View. I expect the view log format will change in some incompatable way
later, probably adding last known refs for the parent branch to View
or something like that.
Anyway, it basically works, although it's a bit slow looking up the
metadata. The actual git branch construction is about as fast as it can be
using the current git plumbing.
This commit was sponsored by Peter Hogg.
Promosing work toward metadata driven filter branches. A few methods
to construct them are stubbed out; all the data types and pure code
seems good.
This commit was sponsored by Walter Somerville.
The ctrl-c hack used before didn't actually seem to work.
No haskell libraries expose TerminateProcess. I tried just calling it via
FFI, but got segfaults, probably to do with the wacky process handle not
being managed correctly. Moving it all into one C function worked.
This was hell. The EvilLinker hack was just final icing on the cake.
We all know what the cake was made of.
A very haskell commit! Just data types, instances to serialize the metadata
to a nice format, and QuickCheck tests.
This commit was sponsored by Andreas Leha.
git-annex has been using MissingH's `abdNormPath` forever, but that's
unmaintained and possibly buggy, and doesn't work on Windows. I've been
wanting to get rid of it for some time, and finally did today, writing a
`simplifyPath` that does the things git-annex needs and will work with all
the Windows filename craziness, and takes advantage of the more modern
System.FilePath to be quite a simple peice of code. A QuickCheck test found
no important divergences from absNormPath. A good first step to making
git-annex not depend on MissingH at all.
And it fixed some weird behaviors on Windows like
`git annex add ..\subdir\file` not working.
Note that absNormPathUnix has been left alone for now.
