This is groundwork for using git-annex transferkeys to run transfers,
in order to allow stalled transfers to be interrupted and retried.
The new upload and download are closer to what git-annex transferkeys
does, so the plan is to make them use it.
Then things that were left using upload' and download' won't recover
from stalls. Notably, that includes import and export. But
at least get/move/copy will be able to. (Also the assistant hopefully,
but not yet.)
This commit was sponsored by Jake Vosloo on Patreon.
Added annex.adjustedbranchrefresh git config to update adjusted branches
set up by git-annex adjust --unlock-present/--hide-missing.
Note, in a few cases, I was not able to make the adjusted branch
be updated in calls to moveAnnex, because information about what
file corresponds to a key is not available. They are:
* If two files point to one file, then eg, `git annex get foo` will
update the branch to unlock foo, but will not unlock bar, because it
does not know about it. Might be fixable by making `git annex get
bar` do something besides skipping bar?
* git-annex-shell recvkey likewise (so sends over ssh from old versions
of git-annex)
* git-annex setkey
* git-annex transferkey if the user does not use --file
* git-annex multicast sends keys with no associated file info
Doing a single full refresh at the end, after any incremental refresh,
will deal with those edge cases.
No behavior changes (hopefully), just adding SeekInput and plumbing it
through to the JSON display code for later use.
Over the course of 2 grueling days.
withFilesNotInGit reimplemented in terms of seekHelper
should be the only possible behavior change. It seems to test as
behaving the same.
Note that seekHelper dummies up the SeekInput in the case where
segmentPaths' gives up on sorting the expanded paths because there are
too many input paths. When SeekInput later gets exposed as a json field,
that will result in it being a little bit wrong in the case where
100 or more paths are passed to a git-annex command. I think this is a
subtle enough problem to not matter. If it does turn out to be a
problem, fixing it would require splitting up the input
parameters into groups of < 100, which would make git ls-files run
perhaps more than is necessary. May want to revisit this, because that
fix seems fairly low-impact.
When storing content on remote fails, always display a reason why.
Since the Storer used by special remotes already did, this mostly affects
git remotes, but not entirely. For example, if git-lfs failed to connect to
the endpoint, it used to silently return False.
The hoped for optimisation of CommandStart with -J did not materialize.
In fact, not runnign CommandStart in parallel is slower than -J3.
So, CommandStart are still run in parallel.
(The actual bad performance I've been seeing with -J in my big repo
has to do with building the remoteList.)
But, this is still progress toward making -J faster, because it gets rid
of the onlyActionOn roadblock in the way of making CommandCleanup jobs
run separate from CommandPerform jobs.
Added OnlyActionOn constructor for ActionItem which fixes the
onlyActionOn breakage in the last commit.
Made CustomOutput include an ActionItem, so even things using it can
specify OnlyActionOn.
In Command.Move and Command.Sync, there were CommandStarts that used
includeCommandAction, so output messages, which is no longer allowed.
Fixed by using startingCustomOutput, but that's still not quite right,
since it prevents message display for the includeCommandAction run
inside it too.
The goal is to be able to run CommandStart in the main thread when -J is
used, rather than unncessarily passing it off to a worker thread, which
incurs overhead that is signficant when the CommandStart is going to
quickly decide to stop.
To do that, the message it displays needs to be displayed in the worker
thread, after the CommandStart has run.
Also, the change will mean that CommandStart will no longer necessarily
run with the same Annex state as CommandPerform. While its docs already
said it should avoid modifying Annex state, I audited all the
CommandStart code as part of the conversion. (Note that CommandSeek
already sometimes runs with a different Annex state, and that has not been
a source of any problems, so I am not too worried that this change will
lead to breakage going forward.)
The only modification of Annex state I found was it calling
allowMessages in some Commands that default to noMessages. Dealt with
that by adding a startCustomOutput and a startingUsualMessages.
This lets a command start with noMessages and then select the output it
wants for each CommandStart.
One bit of breakage: onlyActionOn has been removed from commands that used it.
The plan is that, since a StartMessage contains an ActionItem,
when a Key can be extracted from that, the parallel job runner can
run onlyActionOn' automatically. Then commands won't need to worry about
this detail. Future work.
Otherwise, this was a fairly straightforward process of making each
CommandStart compile again. Hopefully other behavior changes were mostly
avoided.
In a few cases, a command had a CommandStart that called a CommandPerform
that then called showStart multiple times. I have collapsed those
down to a single start action. The main command to perhaps suffer from it
is Command.Direct, which used to show a start for each file, and no
longer does.
Another minor behavior change is that some commands used showStart
before, but had an associated file and a Key available, so were changed
to ShowStart with an ActionItemAssociatedFile. That will not change the
normal output or behavior, but --json output will now include the key.
This should not break it for anyone using a real json parser.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
This is groundwork for nested seek loops, eg seeking over all files and
then performing commandActions on a list of remotes, which can be done
concurrently.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Leveraged the existing verification code by making it also check the
retrievalSecurityPolicy.
Also, prevented getViaTmp from running the download action at all when the
retrievalSecurityPolicy is going to prevent verifying and so storing it.
Added annex.security.allow-unverified-downloads. A per-remote version
would be nice to have too, but would need more plumbing, so KISS.
(Bill the Cat reference not too over the top I hope. The point is to
make this something the user reads the documentation for before using.)
A few calls to verifyKeyContent and getViaTmp, that don't
involve downloads from remotes, have RetrievalAllKeysSecure hard-coded.
It was also hard-coded for P2P.Annex and Command.RecvKey,
to match the values of the corresponding remotes.
A few things use retrieveKeyFile/retrieveKeyFileCheap without going
through getViaTmp.
* Command.Fsck when downloading content from a remote to verify it.
That content does not get into the annex, so this is ok.
* Command.AddUrl when using a remote to download an url; this is new
content being added, so this is ok.
This commit was sponsored by Fernando Jimenez on Patreon.
Added annex.retry, annex.retry-delay, and per-remote versions to configure
transfer retries.
This commit was supported by the NSF-funded DataLad project.
* When annex objects are received into git repositories, their checksums are
verified then too.
* To get the old, faster, behavior of not verifying checksums, set
annex.verify=false, or remote.<name>.annex-verify=false.
* setkey, rekey: These commands also now verify that the provided file
matches the key, unless annex.verify=false.
* reinject: Already verified content; this can now be disabled by
setting annex.verify=false.
recvkey and reinject already did verification, so removed now duplicate
code from them. fsck still does its own verification, which is ok since it
does not use getViaTmp, so verification doesn't happen twice when using fsck
--from.
This is a work in progress. It compiles and is able to do basic command
dispatch, including git autocorrection, while using optparse-applicative
for the core commandline parsing.
* Many commands are temporarily disabled before conversion.
* Options are not wired in yet.
* cmdnorepo actions don't work yet.
Also, removed the [Command] list, which was only used in one place.
Only the assistant uses these, and only the assistant cleans them up, so
make only git annex transferkeys write them,
There is one behavior change from this. If glacier is being used, and a
manual git annex get --from glacier fails because the file isn't available
yet, the assistant will no longer later see that failed transfer file and
retry the get. Hope no-one depended on that old behavior.
Motivation: Hook scripts for nautilus or other file managers
need to provide the user with feedback that a file is being downloaded.
This commit was sponsored by THM Schoemaker.
I've been disliking how the command seek actions were written for some
time, with their inversion of control and ugly workarounds.
The last straw to fix it was sync --content, which didn't fit the
Annex [CommandStart] interface well at all. I have not yet made it take
advantage of the changed interface though.
The crucial change, and probably why I didn't do it this way from the
beginning, is to make each CommandStart action be run with exceptions
caught, and if it fails, increment a failure counter in annex state.
So I finally remove the very first code I wrote for git-annex, which
was before I had exception handling in the Annex monad, and so ran outside
that monad, passing state explicitly as it ran each CommandStart action.
This was a real slog from 1 to 5 am.
Test suite passes.
Memory usage is lower than before, sometimes by a couple of megabytes, and
remains constant, even when running in a large repo, and even when
repeatedly failing and incrementing the error counter. So no accidental
laziness space leaks.
Wall clock speed is identical, even in large repos.
This commit was sponsored by an anonymous bitcoiner.
This is a simple approach for setting up a mirroring repository.
It will work with any type of remotes.
Mirror --from is more expensive than mirror --to in general.
OTOH, mirror --from will get the file from any remote that has it, not only
the named mirror remote. And if the named mirror remote is not the fastest
available remote with a file, that can speed things up.
It would be possible to make the assistant or watch command do a more
dynamic mirroring, that didn't need to scan every time.
Most remotes have meters in their implementations of retrieveKeyFile
already. Simply hooking these up to the transfer log makes that information
available. Easy peasy.
This is particularly valuable information for encrypted remotes, which
otherwise bypass the assistant's polling of temp files, and so don't have
good progress bars yet.
Still some work to do here (see progressbars.mdwn changes), but this
is entirely an improvement from the lack of progress bars for encrypted
downloads.
Clean up from 9769235d6b.
In some cases, looking up a remote by name even though it has no UUID is
desirable. This includes git annex sync, which can operate on remotes
without an annex, and XMPP pairing, which runs addRemote (with calls
byName) before the UUID of the XMPP remote has been configured in git.
When a transfer fails, the progress info can be used to intelligently
retry it. If the transfer managed to make some progress, but did not
fully complete, then there's a good chance that a retry will finish it
(or at least make more progress).
Transfer info files are updated when the callback is called, updating
the number of bytes transferred.
Left unused p variables at every place the callback should be used.
Which is rather a lot..
Used by the assistant, rather than copy, this is faster because it avoids
using git ls-files, avoids checking the location log redundantly, and
runs in oneshot mode, avoiding making a commit to the git-annex branch
for every file transferred.
