This allows the queue to be used in a single process for multiple possibly
conflicting commands, like add and rm, without running them out of order.
This assumes that running the same git subcommand with different parameters
cannot itself conflict.
Baked into the code was an assumption that a repository's git directory
could be determined by adding ".git" to its work tree (or nothing for bare
repos). That fails when core.worktree, or GIT_DIR and GIT_WORK_TREE are
used to separate the two.
This was attacked at the type level, by storing the gitdir and worktree
separately, so Nothing for the worktree means a bare repo.
A complication arose because we don't learn where a repository is bare
until its configuration is read. So another Location type handles
repositories that have not had their config read yet. I am not entirely
happy with this being a Location type, rather than representing them
entirely separate from the Git type. The new code is not worse than the
old, but better types could enforce more safety.
Added support for core.worktree. Overriding it with -c isn't supported
because it's not really clear what to do if a git repo's config is read, is
not bare, and is then overridden to bare. What is the right git directory
in this case? I will worry about this if/when someone has a use case for
overriding core.worktree with -c. (See Git.Config.updateLocation)
Also removed and renamed some functions like gitDir and workTree that
misused git's terminology.
One minor regression is known: git annex add in a bare repository does not
print a nice error message, but runs git ls-files in a way that fails
earlier with a less nice error message. This is because before --work-tree
was always passed to git commands, even in a bare repo, while now it's not.
annex.ssh-options, annex.rsync-options, annex.bup-split-options.
And adjust types to avoid the bugs that broke several config settings
recently. Now "annex." prefixing is enforced at the type level.
A bit tricky to avoid printing it twice in a row when there are queued git
commands to run and journal to stage.
Added a generic way to run an action that may output multiple side
messages, with only the first displayed.
This is incomplete, it does not honor it yet for hash directories
and other annex bookkeeping files. Some of that is not needed for a bare
repo; some of it may be.
getConfig got a remote-specific config, and this confusing name caused it
to be used a couple of places that only were interested in global configs.
Rename to getRemoteConfig and make getConfig only get global configs.
There are no behavior changes here, but remote.<name>.annex-web-options
never actually worked (and per-remote web options is a very unlikely to be
useful case so I didn't make it work), so fix the documentation for it.
Don't check if configure indicated checks won't work. This should fix a
FTBFS on mipsel, where configure correctly detects the checks won't work,
while garbage is returned for disk space info at git-annex runtime. It also
means that, when built via cabal, disk space checks are not enabled,
unfortunatly.
.. Allowing it to be used by things in constant space!
Random statistics: git annex status has gone from taking 239 mb
of memory and 26 seconds in a repo, to 8 mb and 13 seconds.
The trick here is the unsafeInterleaveIO, and the form of the function's
recursion, which I cribbed heavily from System.IO.HVFS.Utils.recurseDirStat.
The difference is, this one goes to a limited depth and avoids statting
everything.
Before, it leaked space due to caching lists of keys. Now all necessary
data about keys is calculated as they stream in.
The "nearly constant" is due to getKeysPresent, which builds up a lot
of [] thunks as it traverses .git/annex/objects/. Will deal with it later.
Now changes are staged into the branch's index, but not committed,
which avoids growing a large journal. And sync and merge always
explicitly commit, ensuring that even when they do nothing else,
they commit the staged changes.
Added a flag file to indicate that the branch's journal contains
uncommitted changes. (Could use git ls-files, but don't want to run
that every time.)
In the future, this ability to have uncommitted changes staged in the
journal might be used on remotes after a series of oneshot commands.
To avoid commits of data to the git-annex branch after each command
is run, set annex.alwayscommit=false. Its data will then be committed
less frequently, when a merge or sync is done.
I was able to reproduce this on linux using the kernel's nfs server and
mounting localhost:/. Determined that removing the directory fails when
the just-deleted file in it was locked. Considered dropping the lock
before removing the directory, but this would complicate parts of the code
that should not need to worry about locking. So instead, ignore the failure
to remove the directory in this case.
While I was at it, made it attempt to remove both levels of hash
directories, in case they're empty.
useful when adding hundreds of thousands of files on a system with plenty
of memory.
git add gets quite slow in such a large repository, so if the system has
more than the ~32 mb of memory the queue can use by default, it's a useful
optimisation to increase the queue size, in order to decrease the number
of times git add is run.
The list of files had to be retained until the end so it could be deleted.
Also, a list of update-index lines was generated and only then fed into it.
Now everything streams in constant space.
When hashing the files, the entire list of shas was read strictly.
That was entirely unnecessary, since there's a cleanup action run
after they're consumed.
Now gitattributes are looked up, efficiently, in only the places that
really need them, using the same approach used for cat-file.
The old CheckAttr code seemed very fragile, in the way it streamed files
through git check-attr.
I actually found that cad8824852
was still deadlocking with ghc 7.4, at the end of adding a lot of files.
This should fix that problem, and avoid future ones.
The best part is that this removes withAttrFilesInGit and withNumCopies,
which were complicated Seek methods, as well as simplfying the types
for several other Seek methods that had a Backend tupled in.
Done by adding a oneshot mode, in which location log changes are written to
the journal, but not committed. Taking advantage of git-annex's existing
ability to recover in this situation.
This is used by git-annex-shell and other places where changes are made to
a remote's location log.
Ssh connection caching is now enabled automatically by git-annex. Only one
ssh connection is made to each host per git-annex run, which can speed some
things up a lot, as well as avoiding repeated password prompts. Concurrent
git-annex processes also share ssh connections. Cached ssh connections are
shut down when git-annex exits.
Note: The rsync special remote does not yet participate in the ssh
connection caching.
For a local git remote, can symlink the file.
For a git remote using rsync, can preseed any local content.
There are a few reasons to use fsck --from on a normal git remote.
One is if it's using gitosis or similar, and you don't have shell access
to run git annex locally. Another reason could be if you just want to
fsck certian files of a bare remote.
This way, the build log will indicate whether StatFS can be relied on.
I've tested all the failing architectures now, and on all of them,
the StatFS code now returns Nothing, rather than Just nonsense.
Also, if annex.diskreserve is set on a platform where StatFS is not
working, git-annex will complain.
Also, the Makefile was missing the sources target used when building with
cabal.
This needs to run git log on the location log files to get at all past
versions of the file, which tends to be a bit slow.
It would be possible to make a version optimised for showing the location
logs for every key. That would only need to run git log once, so would be
faster, but it would need to process an enormous amount of data, so
would not speed up the individual file case.
In the future it would be nice to support log --format. log --json also
doesn't work right yet.
Could have just used hGetContentsStrict here, but that would require
storing all the shas in memory. Since this is called at the end of a
git-annex run, it may have created a *lot* of shas, so I avoid that memory
use and stream them out like before.
Dealing with a race without using locking is exceedingly difficult and tricky.
Fully tested, I hope.
There are three places left where the branch can be updated, that are not
covered by the race recovery code. Let's prove they're all immune to the
race:
1. tryFastForwardTo checks to see if a fast-forward can be done,
and then does git-update-ref on the branch to fast-forward it.
If a push comes in before the check, then either no fast-forward
will be done (ok), or the push set the branch to a ref that can
still be fast-forwarded (also ok)
If a push comes in after the check, the git-update-ref will
undo the ref change made by the push. It's as if the push did not come
in, and the next git-push will see this, and try to re-do it.
(acceptable)
2. When creating the branch for the very first time, an empty index
is created, and a commit of it made to the branch. The commit's ref
is recorded as the current state of the index. If a push came in
during that, it will be noticed the next time a commit is made to the
branch, since the branch will have changed. (ok)
3. Creating the branch from an existing remote branch involves making
the branch, and then getting its ref, and recording that the index
reflects that ref.
If a push creates the branch first, git-branch will fail (ok).
If the branch is created and a racing push is then able to change it
(highly unlikely!) we're still ok, because it first records the ref into
the index.lck, and then updating the index. The race can cause the
index.lck to have the old branch ref, while the index has the newly pushed
branch merged into it, but that only results in an unnecessary update of
the index file later on.
The last branch ref that the index was updated to is stored in
.git/annex/index.lck, and the index only updated when the current
branch ref differs.
(The .lck file should later be used for locking too.)
Some more optimization is still needed, since there is some redundancy in
calls to git show-ref.
Always merge the git-annex branch into .git/annex/index before making a
commit from the index.
This ensures that, when the branch has been changed in any way
(by a push being received, or changes pulled directly into it, or
even by the user checking it out, and committing a change), the index
reflects those changes.
This is much too slow; it needs to be optimised to only update the
index when the branch has really changed, not every time.
Also, there is an unhandled race, when a change is made to the branch
right after the index gets updated. I left it in for now because it's
unlikely and I didn't want to complicate things with additional locking
yet.
I had to, I hope temporarily, lose my nice Annex newtype, and use a type
synonym. This because I cannot find a way to derive a MonadBaseControl
instance of the Annex newtype. I've emailed Bas van Dijk in hope he can
help get the newtype back.
Otherwise appears to build & work.
Supporting multiple directory hash types will allow converting to a
different one, without a flag day.
gitAnnexLocation now checks which of the possible locations have a file.
This means more statting of files. Several places currently use
gitAnnexLocation and immediately check if the returned file exists;
those need to be optimised.
The only fully supported thing is to have the main repository on one disk,
and .git/annex on another. Only commands that move data in/out of the annex
will need to copy it across devices.
There is only partial support for putting arbitrary subdirectories of
.git/annex on different devices. For one thing, but this can require more
copies to be done. For example, when .git/annex/tmp is on one device, and
.git/annex/journal on another, every journal write involves a call to
mv(1). Also, there are a few places that make hard links between various
subdirectories of .git/annex with createLink, that are not handled.
In the common case without cross-device, the new moveFile is actually
faster than renameFile, avoiding an unncessary stat to check that a file
(not a directory) is being moved. Of course if a cross-device move is
needed, it is as slow as mv(1) of the data.
The branch may not exist, if .git/annex has been copied over from another
repo (or a corrupted repo). I suppose it could also have gotten deleted
somehow. Without this, there is a confusing failure.
In git, a Ref can be a Sha, or a Branch, or a Tag. I added type aliases for
those. Note that this does not prevent mixing up of eg, refs and branches
at the type level. Since git really doesn't care, except rare cases like
git update-ref, or git tag -d, that seems ok for now.
There's also a tree-ish, but let's just use Ref for it. A given Sha or Ref
may or may not be a tree-ish, depending on the object type, so there seems
no point in trying to represent it at the type level.
Before, a merge was first calculated, by running various actions that
called git and built up a list of lines, which were at the end sent
to git update-index. This necessarily used space proportional to the size
of the diff between the trees being merged.
Now, lines are streamed into git update-index from each of the actions in
turn.
Runtime size of git-annex merge when merging 50000 location log files
drops from around 100 mb to a constant 4 mb.
Presumably it runs quite a lot faster, too.
Avoids doing auto-merging in commands that don't need fully current
information from the git-annex branch. In particular, git annex add no
longer needs to auto-merge. Affected commands: Anything that doesn't
look up data from the branch, but does write a change to it.
It might seem counterintuitive that we can change a value without first
making sure we have the current value. This optimisation works because
these two sequences are equivilant:
1. pull from remote
2. union merge
3. read file from branch
4. modify file and write to branch
vs.
1. read file from branch
2. modify file and write to branch
3. pull from remote
4. union merge
After either sequence, the git-annex branch contains the same logical content
for the modified file. (Possibly with lines in a different order or
additional old lines of course).
git-annex-shell inannex now returns always 0, 1, or 100 (the last when
it's unclear if content is currently in the index due to it currently being
moved or dropped).
(Actual locking code still not yet written.)
The lock will only persist during the perform stage, so the content must
be removed from the annex then, rather than in the cleanup stage.
(No lock is actually taken yet.)
Many functions took the repo as their first parameter. Changing it
consistently to be the last parameter allows doing some useful things with
currying, that reduce boilerplate.
In particular, g <- gitRepo is almost never needed now, instead
use inRepo to run an IO action in the repo, and fromRepo to get
a value from the repo.
This also provides more opportunities to use monadic and applicative
combinators.
Avoid ever using read to parse a non-haskell formatted input string.
show :: Key is arguably still show abuse, but displaying Keys as filenames
is just too useful to give up.
Thanks Valentin Haenel for a test case showing how non-fast-forward merges
could result in an ongoing pull/merge/push cycle.
While the git-annex branch is fast-forwarded, git-annex's index file is still
updated using the union merge strategy as before. There's no other way to
update the index that would be any faster.
It is possible that a union merge and a fast-forward result in different file
contents: Files should have the same lines, but a union merge may change
their order. If this happens, the next commit made to the git-annex branch
will have some unnecessary changes to line orders, but the consistency
of data should be preserved.
Note that when the journal contains changes, a fast-forward is never attempted,
which is fine, because committing those changes would be vanishingly unlikely
to leave the git-annex branch at a commit that already exists in one of
the remotes.
The real difficulty is handling the case where multiple remotes have all
changed. git-annex does find the best (ie, newest) one and fast forwards
to it. If the remotes are diverged, no fast-forward is done at all. It would
be possible to pick one, fast forward to it, and make a merge commit to
the rest, I see no benefit to adding that complexity.
Determining the best of N changed remotes requires N*2+1 calls to git-log, but
these are fast git-log calls, and N is typically small. Also, typically
some or all of the remote refs will be the same, and git-log is not called to
compare those. In the real world I expect this will almost always add only
1 git-log call to the merge process. (Which already makes N anyway.)
Specifically, disabled trying to update the git-annex branch on the remote,
since that data is never used by operations that act on such remotes.
Also, when copying content to such a remote, skip committing the presence
information changes to its git-annex branch. Leaving it in the journal there
is ok: Any command run on the remote that needs the info will flush the
journal.
This may partially solve this bug:
http://git-annex.branchable.com/bugs/fails_to_handle_lot_of_files/
Although I still see unreaped git processes piling up when doing a copy --to.
Another process may stage journalled files before the lock is
taken, so need to get the list of journalled files afterwards.
It's unfortunate this means getting the directory contents twice,
but it seems better to do that than sometimes take the lock
unnecessarily.
