Avoids users thinking this scan is a big deal, when it's not in the
majority of repos.
showSideActionAfter has some ugly caveats, since it has to display in
the background of another action. I could not see a better way to do it
and it works fine in this particular case. It also doesn't really belong
in Annex.Concurrent, but cannot go in Messages due to an import loop.
Sponsored-by: Dartmouth College's Datalad project
ghc 8.8.4 seems to have changed something that broke code that has been
successfully using forkProcess since 2012. Likely a change to GC internals.
Since forkProcess has never had clear documentation about how to
use it safely, avoid using it at all. Instead, when git-annex needs to
daemonize itself, re-run the git-annex command, in a new process group
and session.
This commit was sponsored by Luke Shumaker on Patreon.
Fix behavior of several commands, including reinject, addurl, and rmurl
when given an absolute path to an unlocked file, or a relative path that
leaves and re-enters the repository.
To avoid slowing down all the cases where the paths are already ok
with an unncessary call to getCurrentDirectory, put in an optimisation
in relPathCwdToFile. That will probably also speed up other parts of
git-annex by some small amount, but I have not benchmarked.
Note that I did not convert branchFileRef, because it seems likely that
it will be used with a file that is not provided by the user, so is already
in a sane format. This is certainly true for the way git-annex uses it,
though maybe arguable to the extent Git.Ref is a reusable library.
This uses a DebugSelector, rather than debug levels, which will allow
for a later option like --debug-from=Process to only
see debuging about running processes.
The module name that contains the thing being debugged is used as the
DebugSelector (in most cases; does not need to be a hard and fast rule).
Debug calls were changed to add that. hslogger did not display
that first parameter to debugM, but the DebugSelector does get
displayed.
Also fastDebug will allow doing debugging in places that are used in
tight loops, with the DebugSelector coming from the Annex Reader
essentially for free. Not done yet.
New error message:
Remote foo not usable by git-annex; setting annex-ignore
http://localhost/foo/config download failed: Configuration of annex.security.allowed-ip-addresses does not allow accessing address ::1
If git config parse fails, or the git config file is not available at the url,
a better error message for that is also shown.
This commit was sponsored by Mark Reidenbach on Patreon.
Checksum as content is received from a remote git-annex repository, rather
than doing it in a second pass.
Not tested at all yet, but I imagine it will work!
Not implemented for any special remotes, and also not implemented for
copies from local remotes. It may be that, for local remotes, it will
suffice to use rsync, rely on its checksumming, and simply return Verified.
(It would still make a checksumming pass when cp is used for COW, I guess.)
As yet unused.
Backend.External could perhaps implement it too, although that would
involve sending chunks of data to it via a pipe or something, so likely
to be slow.
Note this does find things in PATH that are not executable.
Like searchPath use, the executable bit is not checked. Thing is,
there does not seem to be a binding for access(), which would be the
right way to check that the right execute bit is set. Anyway, if it's in
PATH and it's a file, it's probably fine to treat it as something that
was intended to be executable.
This commit was sponsored by Brock Spratlen on Patreon.
Fix an oddity in matching options and preferred content expressions such as
"foo (bar or baz)", which was incorrectly handled as if it were "(foo or
bar) and baz)" rather than the intended "foo and (bar or baz)"
Seemed like a change to consume should be able to handle this case
better, but I was having trouble writing it that way, so instead added
a separate pass that inserts the implicit ands explicitly. Also added
several test cases to make sure versions with and without explicit ands
generate the same.
Seems that dropDrive on windows only drops eg c:/ but not a leading /
while on linux, it does drop a leading / (which is what it considers
to be equivilant to a drive letter. I had been relying on it to drop
both. So need to drop leading directory separators.
Also, if the quickcheck generated input is eg "c:c:c:c:foo",
dropDrive will only drop the first one, leaving a path that's
still not relative. So instead of using dropDrive, just remove the
colons from the path.
Directory special remotes with importtree=yes now avoid unncessary overhead
when inodes of files have changed, as happens whenever a FAT filesystem
gets remounted.
A few unusual edge cases of modifications won't be detected and
imported. I think they're unusual enough not to be a concern. It would
be possible to add a config setting that controls whether to compare
inodes too, but does not seem worth bothering the user about currently.
I chose to continue to use the InodeCache serialization, just with the
inode zeroed. This way, if I later change my mind or make it
configurable, can parse it back to an InodeCache and operate on it. The
overhead of storing a 0 in the content identifier log seems worth it.
There is a one-time cost to this change; all directory special remotes
with importtree=yes will re-hash all files once, and will update the
content identifier logs with zeroed inodes.
This commit was sponsored by Brett Eisenberg on Patreon.
It was just slapping on a path separator to the front of the path to
make it absolute, but on windows, a path like "//foo/bar" actually
has a network "drive" of "//foo" and so that broke the test case.
Since "a:foo" is a somehow relative path on windows
(who knows how), drop any drive from the input. But dropDrive also drops
any leading path separator, making the input path relative. So now
it should be safe to slapp on a leading path separator.
Useful for eg, replicating failures in ghci. No need for this to be a
smart constructor, as long as it's used with valid filepaths, it's ok
and if not the test breaks.
This was not a good test, it broke the requirement that
relPathDirToFileAbs take absolute paths. And it failed when the two
input paths were eg, the same but differently normalized.
Replaced with some tests of the real basics of that function.
And vice-versa, but it's better to use '/' for portability.
Notably, standardPreferredContent contains "archive/*" and that might not
match if the filename ends up coming in with the slashes the other way
around.
Adding new instance for Integer, and some parsers for more parameters.
The conversion of readish to readMaybe is done because a serialized
exit code cannot contain additional text after the number.
New config annex.stalldetection, remote.name.annex-stalldetection, which
can be used to deal with remotes that stall during transfers, or are
sometimes too slow to want to use.
This commit was sponsored by Luke Shumaker on Patreon.
This old code will now be useful for git-annex beyond the assistant.
git-annex won't use the CheckTransferrer part, and won't run transferkeys
as a batch process, and will want withTransferrer to not shut down
transferkeys processes. Still, the rest of this is a good fit for what I
need now.
Also removed some dead code, and simplified a little bit.
This commit was sponsored by Mark Reidenbach on Patreon.
Json objects not yet handled, and some other special cases, but this is
the bulk of the messages.
For progress meters, POSIXTime does not have a Read instance (or a
suitable Show instance), so had to switch to using a Double for progress
meters.
This commit was sponsored by Ethan Aubin on Patreon.
This is an edge case, which happened to be triggered by the P2P protocol
seeing DATA 0. When reading 0 bytes, getting an empty string does
not mean the handle has reached EOF.
I verified there was in fact a bug, where get of an empty file followed
by another file would get the empty file and then fail
with "handle is closed". This fixes it.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
9cb250f7be got the ones in RawFilePath,
but there were others that used the one from unix-compat, which fails at
runtime on windows. To avoid this,
import System.PosixCompat.Files hiding removeLink
This commit was sponsored by Ethan Aubin.
It does use it on both stdout and stderr. It seems unlikely the problem
could really affect stdout, but the unix implementation of it combines
both into a single handle in any case.
It had lost the hAcceptEncoding header that is set as part of the
overriding of http-client's default decompression of compressed files.
Seems likely that would have caused resuming of compressed files to fail
in some cases.
This commit was sponsored by Brett Eisenberg on Patreon.
Fix a bug that could make resuming a download from the web fail when the
entire content of the file is actually already present locally.
What a mess that Request can throw exceptions or not, depending on how
it's configured. Makes it very hard if you need to handle some specific
http status codes in a function like this! Implementing everything two
ways did not seem appealing, if possible at all, so I decided to
override the Request if it did come configured to throw exception on
non-2xx http status. Other exceptions, like from http-client-restricted,
or due to a redirect to a non-http url, still get thrown.
This commit was sponsored by Luke Shumaker on Patreon.
This removeLink was introduced in commit
e505c03bcc, which replaced code
that used removeFile on Windows. So, I know git-annex did not used to do
anything other than removeFile on Windows. If there were symlinks it
wanted to remove, this would not work on windows, but of course it does
not use symlinks on windows.
Unfortunately, there is no hGetNewLineMode. This seems like an oversight
that should be fixed in ghc, but for now, I paper over it with a windows
hack.
The problem with the old version seemed to be that hWaitForInput blocks
rather than timing out when being run concurrently with hGetLine on the
same handle.
This passes the bench test, and also works when run concurrently on
different handles.
This seems to show that hWaitForInput does not seem to behave as
documented. It does not time out, so blocks forever in this situation.
This is with a 0 timeout and with larger timeouts. Unsure why, it looked
like it should work.
