Large speed up to importing trees from special remotes that contain a lot
of files, by only processing changed files.
Benchmarks:
Importing from a special remote that has 10000 files, that have all been
imported before, and 1 new file sped up from 26.06 to 2.59 seconds.
An import with no change and 10000 unchanged files sped up from 24.3 to
1.99 seconds.
Going up to 20000 files, an import with no changes sped up from
125.95 to 3.84 seconds.
Sponsored-by: k0ld on Patreon
For simplicity, I've not tried to make it handle History yet, so when
there is a history, a full import will still be done. Probably the right
way to handle history is to first diff from the current tree to the last
imported tree. Then, diff from the current tree to each of the
historical trees, and recurse through the history diffing from child tree
to parent tree.
I don't think that will need a record of the previously imported
historical trees, and so Logs.Import doesn't store them. Although I did
leave room for future expansion in that log just in case.
Next step will be to change importTree to importChanges and modify
recordImportTree et all to handle it, by using adjustTree.
Sponsored-by: Brett Eisenberg on Patreon
This does, as a side effect, make long notes in json output not
be indented. The indentation is only needed to offset them
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brock Spratlen on Patreon
Converted warning and similar to use StringContainingQuotedPath. Most
warnings are static strings, some do refer to filepaths that need to be
quoted, and others don't need quoting.
Note that, since quote filters out control characters of even
UnquotedString, this makes all warnings safe, even when an attacker
sneaks in a control character in some other way.
When json is being output, no quoting is done, since json gets its own
quoting.
This does, as a side effect, make warning messages in json output not
be indented. The indentation is only needed to offset warning messages
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brett Eisenberg on Patreon
When the filenames are part of the git repository or other files that
might have attacker-controlled names, quote them in error messages.
This is fairly complete, although I didn't do the one in
Utility.DirWatcher.INotify.hs because that doesn't have access to
Git.Filename or Annex.
But it's also quite possible I missed some. And also while scanning for
these, I found giveup used with other things that could be attacker
controlled to contain control characters (eg Keys). So, I'm thinking
it would also be good for giveup to just filter out control characters.
This commit is then not the only line of defence, but just good
formatting when git-annex displays a filename in an error message.
Sponsored-by: Kevin Mueller on Patreon
Added StringContainingQuotedPath, which is used for ActionItemOther.
In the process, checked every ActionItemOther for those containing
filenames, and made them use quoting.
Sponsored-by: Graham Spencer on Patreon
This serves two purposes. --remote=web bypasses other special remotes that
claim the url, same as addurl --raw. And, specifying some other remote
allows making sure that an url is claimed by the remote you expect,
which makes then using setpresentkey not be fragile.
Sponsored-By: the NIH-funded NICEMAN (ReproNim TR&D3) project
Works around this bug in unix-compat:
https://github.com/jacobstanley/unix-compat/issues/56
getFileStatus and other FilePath using functions in unix-compat do not do
UNC conversion on Windows.
Made Utility.RawFilePath use convertToWindowsNativeNamespace to do the
necessary conversion on windows to support long filenames.
Audited all imports of System.PosixCompat.Files to make sure that no
functions that operate on FilePath were imported from it. Instead, use
the equvilants from Utility.RawFilePath. In particular the
re-export of that module in Common had to be removed, which led to lots
of other changes throughout the code.
The changes to Build.Configure, Build.DesktopFile, and Build.TestConfig
make Utility.Directory not be needed to build setup. And so let it use
Utility.RawFilePath, which depends on unix, which cannot be in
setup-depends.
Sponsored-by: Dartmouth College's Datalad project
This is intended for users who want to see what it would output in order to
eg, check if a file would be added to git or the annex. It is not intended
as a way for scripts to get information.
Sponsored-by: Dartmouth College's Datalad project
--backend is no longer a global option, and is only accepted by commands
that actually need it.
Three commands that used to support backend but don't any longer are
watch, webapp, and assistant. It would be possible to make them support it,
but I doubt anyone used the option with these. And in the case of webapp
and assistant, the option was handled inconsistently, only taking affect
when the command is run with an existing git-annex repo, not when it
creates a new one.
Also, renamed GlobalOption etc to AnnexOption. Because there are many
options of this type that are not actually global (any more) and get
added to commands that need them.
Sponsored-by: Kevin Mueller on Patreon
Some small wins, almost certianly swamped by the system calls, but still
worthwhile progress on the RawFilePath conversion.
Sponsored-by: Erik Bjäreholt on Patreon
When adding a small file, it does not get locked down, so can be modified
after git-annex checks that it's small. The use of queued git add made the
race window nice and wide too.
Fixed by checking if the file has changed, and by not using git add.
Instead, have to recapitulate git add's handling of things like symlinks
and executable files.
Sponsored-by: Jochen Bartl on Patreon
This is not a complete fix for all such races, only the one where a
large file gets changed while adding and gets added to git rather than
to the annex.
addLink needs to go away, any caller of it is probably subject to the
same kind of race. (Also, addLink itself fails to check gitignore when
symlinks are not supported.)
ingestAdd no longer checks gitignore. (It didn't check it consistently
before either, since there were cases where it did not run git add!)
When git-annex import calls it, it's already checked gitignore itself
earlier. When git-annex add calls it, it's usually on files found
by withFilesNotInGit, which handles checking ignores.
There was one other case, when git-annex add --batch calls it. In that
case, old git-annex behaved rather badly, it would seem to add the file,
but git add would later fail, leaving the file as an unstaged annex symlink.
That behavior has also been fixed.
Sponsored-by: Brett Eisenberg on Patreon
This improves the borg special remote memory usage, by
letting it only load one archive's worth of filenames into memory at a
time, and building up a larger tree out of the chunks.
When a borg repository has many archives, git-annex could easily OOM
before. Now, it will use only memory proportional to the number of
annexed keys in an archive.
Minor implementation wart: Each new chunk re-opens the content
identifier database, and also a new vector clock is used for each chunk.
This is a minor innefficiency only; the use of continuations makes
it hard to avoid, although putting the database handle into a Reader
monad would be one way to fix it.
It may later be possible to extend the ImportableContentsChunkable
interface to remotes that are not third-party populated. However, that
would perhaps need an interface that does not use continuations.
The ImportableContentsChunkable interface currently does not allow
populating the top of the tree with anything other than subtrees. It
would be easy to extend it to allow putting files in that tree, but borg
doesn't need that so I left it out for now.
Sponsored-by: Noam Kremen on Patreon
This should complete the fix started in
6329997ac4, fixing the actual cause of the
test suite failure this time.
Sponsored-by: Dartmouth College's Datalad project
This eliminates the distinction between decodeBS and decodeBS', encodeBS
and encodeBS', etc. The old implementation truncated at NUL, and the
primed versions had to do extra work to avoid that problem. The new
implementation does not truncate at NUL, and is also a lot faster.
(Benchmarked at 2x faster for decodeBS and 3x for encodeBS; more for the
primed versions.)
Note that filepath-bytestring 1.4.2.1.8 contains the same optimisation,
and upgrading to it will speed up to/fromRawFilePath.
AFAIK, nothing relied on the old behavior of truncating at NUL. Some
code used the faster versions in places where I was sure there would not
be a NUL. So this change is unlikely to break anything.
Also, moved s2w8 and w82s out of the module, as they do not involve
filesystem encoding really.
Sponsored-by: Shae Erisson on Patreon
Like import was using ActionItemWorkTreeFile, it's ok to use it for export,
even though it might not correspond with a file in the work tree.
And renamed it to ActionItemTreeFile to make that clearer.
Note that when an export has to rename files, it still uses
ActionItemOther, so file will still be null in that case, but as no file is
being transferred, that seems ok.
Missed this when implementing it because of the default case catching
the new constructor. So, removed that default case to make sure
future types of adjusted branches don't make the same mistake.
Complicated by git-annex addurl --fast which adds the file whose content
is not present, so it needs to stay unlocked when on such a branch.
This commit was sponsored by Brock Spratlen on Patreon.
This is conceptually very simple, just making a 1 that was hard coded be
exposed as a config option. The hard part was plumbing all that, and
dealing with complexities like reading it from git attributes at the
same time that numcopies is read.
Behavior change: When numcopies is set to 0, git-annex used to drop
content without requiring any copies. Now to get that (highly unsafe)
behavior, mincopies also needs to be set to 0. It seemed better to
remove that edge case, than complicate mincopies by ignoring it when
numcopies is 0.
This commit was sponsored by Denis Dzyubenko on Patreon.
May actually work now.
Note that, importKey now has to add the size to the key if it's supposed
to have size. Remote.Directory relied on the importer adding the size,
which is no longer done, so it was changed; it was the only one.
This way, importKey does not need to behave differently between regular
and thirdpartypopulated imports.
This is to support, eg a borg repo as a special remote, which is
populated not by running git-annex commands, but by using borg. Then
git-annex sync lists the content of the remote, learns which files are
annex objects, and treats those as present in the remote.
So, most of the import machinery is reused, to a new purpose. While
normally importtree maintains a remote tracking branch, this does not,
because the files stored in the remote are annex object files, not
user-visible filenames. But, internally, a git tree is still generated,
of the files on the remote that are annex objects. This tree is used
by retrieveExportWithContentIdentifier, etc. As with other import/export
remotes, that the tree is recorded in the export log, and gets grafted
into the git-annex branch.
importKey changed to be able to return Nothing, to indicate when an
ImportLocation is not an annex object and so should be skipped from
being included in the tree.
It did not seem to make sense to have git-annex import do this, since
from the user's perspective, it's not like other imports. So only
git-annex sync does it.
Note that, git-annex sync does not yet download objects from such
remotes that are preferred content. importKeys is run with
content downloading disabled, to avoid getting the content of all
objects. Perhaps what's needed is for seekSyncContent to be run with these
remotes, but I don't know if it will just work (in particular, it needs
to avoid trying to transfer objects to them), so I skipped that for now.
(Untested and unused as of yet.)
This commit was sponsored by Jochen Bartl on Patreon.
MatchingKey is not the thing to use when matching on actual worktreee
files.
Fix reversion in 8.20201116 that made include= and exclude= in
preferred/required content expressions match a path relative to the current
directory, rather than the path from the top of the repository.
nukeFile replaced with removeWhenExistsWith removeLink, which allows
using RawFilePath. Utility.Directory cannot use RawFilePath since setup
does not depend on posix.
This commit was sponsored by Graham Spencer on Patreon.
It seemed best to do this, for consistency with every other way files can
get into a git-annex repo. Although it's just a bit strange that a local
.gitignore file affects the pseudo-commits made for the remote that's
imported from.
This commit was sponsored by Brett Eisenberg on Patreon.
Anything that needs to examine the file content will fail to match,
or fall back to other available information. But the intent is that the
matcher be checked for matchNeedsFileContent and only be used if it does
not, so the exact behavior doesn't much matter as it should never
happen.
The real point of this is to not need to provide a dummy content file
when matching.
This commit was sponsored by Martin D on Patreon.
add, addurl, importfeed, import: Added --no-check-gitignore option
for finer grained control than using --force.
(--force is used for too many different things, and at least one
of these also uses it for something else. I would like to reduce
--force's footprint until it only forces drops or a few other data
losses. For now, --force still disables checking ignores too.)
addunused: Don't check .gitignores when adding files. This is a behavior
change, but I justify it by analogy with git add of a gitignored file
adding it, asking to add all unused files back should add them all back,
not skip some. The old behavior was surprising.
In Command.Lock and Command.ReKey, CheckGitIgnore False does not change
behavior, it only makes explicit what is done. Since these commands are run
on annexed files, the file is already checked into git, so git add won't
check ignores.
No behavior changes (hopefully), just adding SeekInput and plumbing it
through to the JSON display code for later use.
Over the course of 2 grueling days.
withFilesNotInGit reimplemented in terms of seekHelper
should be the only possible behavior change. It seems to test as
behaving the same.
Note that seekHelper dummies up the SeekInput in the case where
segmentPaths' gives up on sorting the expanded paths because there are
too many input paths. When SeekInput later gets exposed as a json field,
that will result in it being a little bit wrong in the case where
100 or more paths are passed to a git-annex command. I think this is a
subtle enough problem to not matter. If it does turn out to be a
problem, fixing it would require splitting up the input
parameters into groups of < 100, which would make git ls-files run
perhaps more than is necessary. May want to revisit this, because that
fix seems fairly low-impact.
Only supported by some special remotes: directory
I need to check the rest and they're currently missing methods until I do.
git-annex sync --no-content does not yet use this to do imports
Already supported --json, but not that.
Also checked all other commands that only support --json, and the only
other one that does transfers is fsck (--from), which it did not seem worth
adding --json-progress to really.
retrieveExport is part of ongoing transition to make remote methods
throw exceptions, rather than silently hide them.
getKey very rarely fails, and when it does it's always for the same reason
(user configured annex.backend to url for some reason). So, this will
avoid dealing with Nothing everywhere it's used.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Remaining things needing converted are in the assistant, and Annex.Ssh.
Every other remaining call to createDirectoryIfMissing True has been
audited and is not relevant. The ones in Build/ of course don't get
included in the program. Others included eg, Remote.Tahoe and
Config.Files which both write to dotfiles under the home directory.
* annex.addunlocked can be set to an expression with the same format used by
annex.largefiles, in case you want to default to unlocking some files but
not others.
* annex.addunlocked can be configured by git-annex config.
Added a git-annex-matching-expression man page, broken out from
tips/largefiles.
A tricky consequence of this is that git-annex add --relaxed
honors annex.addunlocked, but an expression might want to know the size
or content of an url, which it's not going to download. I decided it was
better not to fail, and just dummy up some plausible data in that case.
Performance impact should be negligible. The global config is already
loaded for annex.largefiles. The expression only has to be parsed once,
and in the simple true/false case, it should not do any additional work
matching it.
git-annex find is now RawFilePath end to end, no string conversions.
So is git-annex get when it does not need to get anything.
So this is a major milestone on optimisation.
Benchmarks indicate around 30% speedup in both commands.
Probably many other performance improvements. All or nearly all places
where a file is statted use RawFilePath now.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
No behavior changes, but this shows everywhere that a progress meter
could be displayed when hashing a file to add to the annex.
Many of the places don't make sense to display a progress meter though,
eg when importing the copy of the file probably swamps the hashing of
the file.
