elmimmo
9cde237c47
Added a comment: Remotes when using multiple repos
2018-01-18 07:02:19 +00:00
elon.bing@6534c6b616a8fda498b5bfa4e48ca5a1ebb7c48e
72e28dca89
Fixed typo: added "that" to "to require [that] more than one copy of a file exists"
2017-11-02 22:46:47 +00:00
Joey Hess
748ecc51d8
remove recent addition of receive.denyNonFastForwards to walkthrough
...
That is a dangerous setting, and not needed.
I tried the walkthrough as it was without it, and syncing in the USB
remote worked ok. There was a problem merging from origin/master, since
that branch didn't exist yet, but that didn't prevent sync from working
at all.
To avoid even that problem, reordered the walkthrough, so files get
committed to the repo before the remote gets set up.
This commit was sponsored by Ole-Morten Duesund on Patreon.
2017-02-13 16:02:53 -04:00
alanz
ac45e758f4
spacing
2017-01-31 11:34:43 +00:00
alanz
e5adeba3ac
Otherwise the USB remote cannot sync
2017-01-31 11:33:32 +00:00
https://launchpad.net/~stephane-gourichon-lpad
b5e7bb35a3
Added a comment: Bitten again by "E" backend, wish "e" backend.
2016-10-30 19:19:22 +00:00
dusty@dba9614abc02e013134f95c2c59181a6c12a8468
1fc419e447
Added a comment: Nevermind - broken symlinks will be fixed on commit
2016-08-23 21:53:05 +00:00
dusty@dba9614abc02e013134f95c2c59181a6c12a8468
82b347d5d9
Added a comment: moving files with git mv can yield broken symlink
2016-08-23 21:48:59 +00:00
Joey Hess
bd4ad3d2e8
comment
2016-03-14 16:37:55 -04:00
Joey Hess
7125a1fb27
rename files containing :
...
This is mostly to let the repo check out on windows w/o using cygwin's git.
But, bash completion is also crap with : , so ..
2016-03-12 12:57:18 -04:00
tom_clune
288326f121
Added a comment: dropping files after changing branches/tags
2016-02-24 22:19:00 +00:00
Joey Hess
bb6719678e
update walkthrough and add tip about using v6 unlocked files
...
The walkthrough should make sense now both for v5 and v6 repo users.
2015-12-26 16:47:23 -04:00
http://joeyh.name/
a6dec1c9db
Added a comment
2015-12-10 18:58:46 +00:00
fbicknel@01ede624a1a56b3998b823e9b60da0ff81cccb16
4b31d9c404
Added a comment: Complete removal
2015-12-10 16:16:43 +00:00
Joey Hess
50949b11ab
response
2015-10-15 14:51:08 -04:00
CandyAngel
19fdf55a0b
Added a comment
2015-10-15 10:59:59 +00:00
ptspts@d0db5f2b8c4e6befae8899f31c117d093913f43e
a3d6da5afb
Added a comment: renaming oesn't work as expected when changing the extension
2015-10-15 08:54:08 +00:00
Joey Hess
888fc6292d
show git-annex init w/o description for laptop, where default would suffice. And for init of usb drive, be clear that it's a description, not a name.
2015-10-06 15:59:43 -04:00
Joey Hess
b3f183bc3f
link to the centralized_git_repository_tutorial
2015-08-05 14:15:20 -04:00
https://www.google.com/accounts/o8/id?id=AItOawnWvnTWY6LrcPB4BzYEBn5mRTpNhg5EtEg
4f11f9b539
I hope these notes do not make this walkthrough page too big.
2015-08-01 22:29:25 +00:00
Joey Hess
514776662d
remove possibly incorrect statement about walkthrough not making a direct mode repo -- depends on OS and filesystem
2015-01-20 12:43:18 -04:00
Joey Hess
05bb05b385
add new walkthrough chapter on using special remotes
2015-01-20 12:41:49 -04:00
Jean Jordaan
c011fe156d
Get rid of mysterious "_why_"
2014-12-20 14:18:24 +02:00
Joey Hess
1970563dd9
comment and associated todo
2014-10-31 16:39:19 -04:00
https://www.google.com/accounts/o8/id?id=AItOawn3p4i4lk_zMilvjnJ9sS6g2nerpgz0Fjc
be0523f871
Added a comment: Keep historical data, but delete data never referenced
2014-10-26 12:06:25 +00:00
Joey Hess
4ae25032c6
maybe better note for direct mode, although I dislike the walkthrough being complicated by direct mode at all
2014-08-12 14:30:44 -04:00
https://www.google.com/accounts/o8/id?id=AItOawnG_weCiH6IleQfVmRPmFJflHQMHdAcDkU
54f3ff878c
add a note about direct mode
2014-07-25 07:57:21 +00:00
Joey Hess
d3832fab5c
remove setup_git page
...
There were two problems with this page:
* It didn't explain how to set up git.
* It's not necessary to set up git. git-annex init detects when git needs
configuration and automatically configures it.
2014-05-18 11:26:11 -04:00
https://www.google.com/accounts/o8/id?id=AItOawl3r3BRaUTTVrkwDJCIr1vSAVFXy4l-zY8
a8d41bd365
2014-05-18 04:38:33 +00:00
https://www.google.com/accounts/o8/id?id=AItOawkexhIpGcYa22aPQtLm-StpHiF-MHYPh5w
8cc4df580b
Fix more copy and paste errors
2014-05-15 23:26:04 +00:00
Joey Hess
c2c36886e1
fix paste-o
2014-05-15 16:43:05 -04:00
Joey Hess
de0c10ae5b
fix paste-o
2014-05-15 16:42:37 -04:00
Robie Basak
4184566627
ddar special remote
2014-05-15 16:32:44 -04:00
Joey Hess
f80f0e12fe
Simplified repository description line format. The remote name, if any, is always in square brackets after the description.
2014-04-26 21:28:49 -03:00
madduck
8f367a183f
Added a comment: Warn while inconsistent
2014-04-06 20:44:27 +00:00
https://www.google.com/accounts/o8/id?id=AItOawkdAwJm7kqiwoonPrxmWfMOIxIQBvk6UTI
cb325254e6
2014-03-11 21:07:33 +00:00
Joey Hess
f21889a9a3
update walkthrough
2014-02-20 14:48:09 -04:00
Joey Hess
7b9e1fbc9c
tweak wording
2014-02-10 11:59:23 -04:00
Joey Hess
de8126ab72
add a walkthrough section discussing git-annex's skipping of files on noop
2014-02-02 17:01:41 -04:00
Joey Hess
ba6cba97d2
update docs for sync --content
2014-02-02 16:21:42 -04:00
Joey Hess
d66535f065
global numcopies setting
...
* numcopies: New command, sets global numcopies value that is seen by all
clones of a repository.
* The annex.numcopies git config setting is deprecated. Once the numcopies
command is used to set the global number of copies, any annex.numcopies
git configs will be ignored.
* assistant: Make the prefs page set the global numcopies.
This global numcopies setting is needed to let preferred content
expressions operate on numcopies.
It's also convenient, because typically if you want git-annex to preserve N
copies of files in a repo, you want it to do that no matter which repo it's
running in. Making it global avoids needing to warn the user about gotchas
involving inconsistent annex.numcopies settings.
(See changes to doc/numcopies.mdwn.)
Added a new variety of git-annex branch log file, that holds only 1 value.
Will probably be useful for other stuff later.
This commit was sponsored by Nicolas Pouillard.
2014-01-20 16:47:56 -04:00
Joey Hess
c1cdfabcbb
adjust for earlier change that made sync be introduced earlier
2013-09-07 19:18:16 -04:00
Joey Hess
4e6cf16117
adjust walkthrough to also work on Windows
...
(not fully tested on windows)
2013-09-03 13:59:08 -04:00
Joey Hess
822918089e
dropunused behavior change: Now refuses to drop the last copy of a file, unless you use the --force.
...
This was the last place in git-annex that could remove data referred to by
the git history, without being forced.
Like drop, dropunused checks remotes, and honors the global annex.numcopies
setting. (However, .gitattributes settings cannot apply to unused files.)
2013-07-25 19:50:44 -04:00
http://brohaveyouseenmysocks.wordpress.com/
b7f96cbd96
typo
2013-07-21 04:44:19 +00:00
Joey Hess
43ca8eb066
expand
2013-07-09 14:28:45 -04:00
Joey Hess
fc9d68d608
wording
2013-07-08 16:27:00 -04:00
Joey Hess
655ca5e51e
add a new item to walkthrough, as people get confused about whether tags and branches are supported (they are)
2013-07-08 16:17:28 -04:00
Joey Hess
0caee4ae28
add a note
2013-07-08 16:17:24 -04:00
Joey Hess
04d07f2c1f
--unused: New switch that makes git-annex operate on all data found by the last run of git annex unused. Supported by fsck, get, move, copy.
2013-07-03 15:26:59 -04:00
