This runs git-cat-file in non-batch mode for all files with spaces.
If a directory tree has a lot of them, and is in direct mode, even "git
annex add" when there are few new files will need a *lot* of forks!
The only reason buffering the whole file content to get the sha is not a
memory leak is that git-annex only ever uses this on symlinks.
This needs to be reverted as soon as a fix is available in git!
A git pathspec is a filename, except when it starts with ':', it's taken
to refer to a branch, etc. Rather than special case ':', any filename
starting with anything unusual is prefixed with "./"
This could have been a real mess to deal with, but luckily SafeCommand
is already extensively used and so we know at the type level the difference
between parameters that are files, and parameters that are command options.
Testing did show that Git.Queue was not using SafeCommand on
filenames fed to xargs. (Filenames starting with '-' worked before only
because -- was used to separate filenames from options when calling eg git
add.)
The test suite now passes with filenames starting with ':'. However, I did
not keep that change to it, because such filenames are probably not legal
on windows, and I have enough ugly windows ifdefs in there as it is.
This commit was sponsored by Otavio Salvador. Thanks!
Fuzz tests have shown that git cat-file --batch sometimes stops running.
It's not yet known why (no error message; repo seems ok). But this is
something we can deal with in the CoProcess framework, since all 3 types of
long-running git processes should be restartable if they fail.
Note that, as implemented, only IO errors are caught. So an error thrown
by the reveiver, when it sees something that is not valid output from
git cat-file (etc) will not cause a restart. I don't want it to retry
if git commands change their output or are just outputting garbage.
This does mean that if the command did a partial output and crashed in the
middle, it would still not be restarted.
There is currently no guard against restarting a command repeatedly, if,
for example, it crashes repeatedly on startup.
That's needed in files used to build the configure program.
For the other files, I'm keeping my __WINDOWS__ define, as I find that much easier to type.
I may search and replace it to use the mingw32_HOST_OS thing later.
Pass subcommand as a regular param, which allows passing git parameters
like -c before it. This was already done in the pipeing set of functions,
but not the command running set.
Two fixes. First, and most importantly, relax the isLinkToAnnex check
to only look for /annex/objects/, not [^|/].git/annex/objects. If
GIT_DIR is used with a detached work tree, the git directory is
not necessarily named .git.
There are important caveats with doing that at all, since git-annex will
make symlinks that point at GIT_DIR, which means that the relative path
between GIT_DIR and GIT_WORK_TREE needs to remain stable across all clones
of the repository.
----
The other fix is just fixing crazy and wrong code that, when GIT_DIR is
set, expects to still find a git repository in the path below the work
tree, and uses some of its configuration, and some of GIT_DIR. What was I
thinking, and why can't I seem to get this code right?
Making the pre-commit hook look at git diff-index to find changed direct
mode files and update the mappings works pretty well.
One case where it does not work is when a file is git annex added, and then
git rmed, and then this is committed. That's a no-op commit, so the hook
probably doesn't even run, and it certianly never notices that the file
was deleted, so the mapping will still have the original filename in it.
For this and other reasons, it's important that the mappings still be
treated as possibly inconsistent.
Also, the assistant now allows the pre-commit hook to run when in direct
mode, so the mappings also get updated there.
New setting, can be used to disable autocommit of changed files by the
assistant, while it still does data syncing and other tasks.
Also wired into webapp UI
Union merges involving two or more repositories could sometimes result in
data from one repository getting lost. This could result in the location
log data becoming wrong, and fsck being needed to fix it.
NB: I audited for any other occurrences of this problem. There are other
places than union merge where multiple changes are fed into update-index
in a stream, but they all involve working copy files being staged, or their
deletion being staged, and in this case it's fine for the later changes
to override the earlier ones.
git add --update cannot be used, because it'll stage typechanged direct
mode files. Intead, use ls-files to find deleted files, and stage them
ourselves.
It seems that no commit was made before when the scan staged deleted files.
(Probably masked since if files were added, a commit happened then..)
Now that I'm doing the staging, I was also able to fix that bug.
Wrote a better git remote name sanitizer. Git blows up on lots of weird
stuff, especially if it starts the remote name, but I managed to get
some common punctuation working.
Monitors git-annex branch for changes, which are noticed by the Merger
thread whenever the branch ref is changed (either due to an incoming push,
or a local change), and refreshes cached config values for modified config
files.
Rate limited to run no more often than once per minute. This is important
because frequent git-annex branch changes happen when files are being
added, or transferred, etc.
A primary use case is that, when preferred content changes are made,
and get pushed to remotes, the remotes start honoring those settings.
Other use cases include propigating repository description and trust
changes to remotes, and learning when a remote has added a new special
remote, so the webapp can present the GUI to enable that special remote
locally.
Also added a uuid.log cache. All other config files already had caches.
The old code was just wrong in taking fromPath of GIT_DIR -- that made an
localUnknown location with the GIT_DIR in it, which only worked by
accident, and failed in submodules.
When rsyncProgress pipes rsync's stdout, this turns out to cause a ssh
process started by rsync to be left behind as a zombie. I don't know why,
but my recent zombie reaping cleanup was correct, it's just that this other
zombie, that's not directly started by git-annex, was no longer reaped
due to changes in the cleanup. Make rsyncProgress reap the zombie started
by rsync, as a workaround.
FWIW, the process tree looks like this. It seems like the rsync child
is for some reason starting but not waiting on this extra ssh process.
Ssh connection caching may be involved -- disabling it seemed to change
the shape of the tree, but did not eliminate the zombie.
9378 pts/14 S+ 0:00 | \_ rsync -p --progress --inplace -4 -e 'ssh' '-S' ...
9379 pts/14 S+ 0:00 | | \_ ssh ...
9380 pts/14 S+ 0:00 | | \_ rsync -p --progress --inplace -4 -e 'ssh' '-S' ...
9381 pts/14 Z+ 0:00 | \_ [ssh] <defunct>
calcGitLink turns out to need it to be absolute, and it normally is,
but not if it's read from a .git file in a submodule, or perhaps from
GIT_DIR.
I should look into dropping this invariant.
Now that this is handled correctly, git-annex can be used in git submodules.
Also, fixed infelicity where Git.CurrentRepo and Git.Config.updateLocation
were both dealing with core.worktree. Now updateLocation handles it for
Local as well as for LocalUnknown repos.
I'm down to 9 places in the code that can produce unwaited for zombies.
Most of these are pretty innocuous, at least for now, are only
used in short-running commands, or commands that run a set of
actions and explicitly reap zombies after each one.
The one from Annex.Branch.files could be trouble later,
since both Command.Fsck and Command.Unused can trigger it,
and the assistant will be doing those eventally. Ditto the one in
Git.LsTree.lsTree, which Command.Unused uses.
The only ones currently affecting the assistant though, are
in Git.LsFiles. Several threads use several of those.
(And yeah, using pipes or ResourceT would be a less ad-hoc approach,
but I don't really feel like ripping my entire code base apart right
now to change a foundation monad. Maybe one of these days..)
Nearly everything that's reading from git is operating on a small
amount of output and has been switched to use that. Only pipeNullSplit
stuff continues using the lazy version that yields zombies.
Don't expose these as branches in refs/heads/. Instead hide them away in
refs/synced/ where only show-ref will find them.
Make unused only look at branches and tags, not these other things,
so it won't care if some stale sync ref used to use a file.
This means they don't need to be deleted, which could have
led to an incoming sync being missed.
Make Utility.Process wrap the parts of System.Process that I use,
and add debug logging to them.
Also wrote some higher-level code that allows running an action
with handles to a processes stdin or stdout (or both), and checking
its exit status, all in a single function call.
As a bonus, the debug logging now indicates whether the process
is being run to read from it, feed it data, chat with it (writing and
reading), or just call it for its side effect.
Test suite now passes with -threaded!
I traced back all the hangs with -threaded to System.Cmd.Utils. It seems
it's just crappy/unsafe/outdated, and should not be used. System.Process
seems to be the cool new thing, so converted all the code to use it
instead.
In the process, --debug stopped printing commands it runs. I may try to
bring that back later.
Note that even SafeSystem was switched to use System.Process. Since that
was a modified version of code from System.Cmd.Utils, it needed to be
converted too. I also got rid of nearly all calls to forkProcess,
and all calls to executeFile, which I'm also doubtful about working
well with -threaded.
Accept arbitrarily encoded repository filepaths etc when reading git config
output. This fixes support for remotes with unusual characters in their
names.
For example, a remote with a url of /tmp/çüş was previously
skipped, because the filename wasn't encoded right so it didn't think it
was available. And when setting the annex-uuid of a remote named "çüş",
it used to add it under a mis-encoded form of the remote's name. Both these
cases now work ok in my testing.
While I was in there, I noticed and fixed a bug in the queue size
calculations. It was never encountered only because Queue.add was
only ever run with 1 file in the list.
This allows the queue to be used in a single process for multiple possibly
conflicting commands, like add and rm, without running them out of order.
This assumes that running the same git subcommand with different parameters
cannot itself conflict.
Avoid more expensive code path when no core.worktree is configured.
Don't change worktree when reading config if one is already set.
This could happen if GIT_CORE_WORKTREE is set, and the repo also has
core.worktree, and the config is reread. Now GIT_CORE_WORKTREE will
prevail.
The environment needs to override git-config. Changed when git config is
read, and avoid rereading it once it's been read.
chdir for both worktree settings.
Baked into the code was an assumption that a repository's git directory
could be determined by adding ".git" to its work tree (or nothing for bare
repos). That fails when core.worktree, or GIT_DIR and GIT_WORK_TREE are
used to separate the two.
This was attacked at the type level, by storing the gitdir and worktree
separately, so Nothing for the worktree means a bare repo.
A complication arose because we don't learn where a repository is bare
until its configuration is read. So another Location type handles
repositories that have not had their config read yet. I am not entirely
happy with this being a Location type, rather than representing them
entirely separate from the Git type. The new code is not worse than the
old, but better types could enforce more safety.
Added support for core.worktree. Overriding it with -c isn't supported
because it's not really clear what to do if a git repo's config is read, is
not bare, and is then overridden to bare. What is the right git directory
in this case? I will worry about this if/when someone has a use case for
overriding core.worktree with -c. (See Git.Config.updateLocation)
Also removed and renamed some functions like gitDir and workTree that
misused git's terminology.
One minor regression is known: git annex add in a bare repository does not
print a nice error message, but runs git ls-files in a way that fails
earlier with a less nice error message. This is because before --work-tree
was always passed to git commands, even in a bare repo, while now it's not.
This is incomplete, it does not honor it yet for hash directories
and other annex bookkeeping files. Some of that is not needed for a bare
repo; some of it may be.
git-annex (but not git-annex-shell) supports the git help.autocorrect
configuration setting, doing fuzzy matching using the restricted
Damerau-Levenshtein edit distance, just as git does. This adds a build
dependency on the haskell edit-distance library.
Continue using the key name as bup ref name, to preserve backwards
compatability, unless it is an illegal git ref. In that case, use a sha256
of the key name instead.
The filename sent to git cat-file needs to be sent on a File encoded handle.
Also set the read handle to use the File encoding, so that any error
message mentioning the filename is received properly.
The actual file content is read using Data.ByteString.Char8, which
will ignore the read handle's encoding, so this won't change that.
(Whether that is entirely correct remains to be seen.)
useful when adding hundreds of thousands of files on a system with plenty
of memory.
git add gets quite slow in such a large repository, so if the system has
more than the ~32 mb of memory the queue can use by default, it's a useful
optimisation to increase the queue size, in order to decrease the number
of times git add is run.
The list of files had to be retained until the end so it could be deleted.
Also, a list of update-index lines was generated and only then fed into it.
Now everything streams in constant space.
When hashing the files, the entire list of shas was read strictly.
That was entirely unnecessary, since there's a cleanup action run
after they're consumed.
Now gitattributes are looked up, efficiently, in only the places that
really need them, using the same approach used for cat-file.
The old CheckAttr code seemed very fragile, in the way it streamed files
through git check-attr.
I actually found that cad8824852
was still deadlocking with ghc 7.4, at the end of adding a lot of files.
This should fix that problem, and avoid future ones.
The best part is that this removes withAttrFilesInGit and withNumCopies,
which were complicated Seek methods, as well as simplfying the types
for several other Seek methods that had a Backend tupled in.
Under ghc 7.4, this seems to be able to handle all filename encodings
again. Including filename encodings that do not match the LANG setting.
I think this will not work with earlier versions of ghc, it uses some ghc
internals.
Turns out that ghc 7.4 has a special filesystem encoding that it uses when
reading/writing filenames (as FilePaths). This encoding is documented
to allow "arbitrary undecodable bytes to be round-tripped through it".
So, to get FilePaths from eg, git ls-files, set the Handle that is reading
from git to use this encoding. Then things basically just work.
However, I have not found a way to make Text read using this encoding.
Text really does assume unicode. So I had to switch back to using String
when reading/writing data to git. Which is a pity, because it's some
percent slower, but at least it works.
Note that stdout and stderr also have to be set to this encoding, or
printing out filenames that contain undecodable bytes causes a crash.
IMHO this is a misfeature in ghc, that the user can pass you a filename,
which you can readFile, etc, but that default, putStr of filename may
cause a crash!
Git.CheckAttr gave me special trouble, because the filenames I got back
from git, after feeding them in, had further encoding breakage.
Rather than try to deal with that, I just zip up the input filenames
with the attributes. Which must be returned in the same order queried
for this to work.
Also of note is an apparent GHC bug I worked around in Git.CheckAttr. It
used to forkProcess and feed git from the child process. Unfortunatly,
after this forkProcess, accessing the `files` variable from the parent
returns []. Not the value that was passed into the function. This screams
of a bad bug, that's clobbering a variable, but for now I just avoid
forkProcess there to work around it. That forkProcess was itself only added
because of a ghc bug, #624389. I've confirmed that the test case for that
bug doesn't reproduce it with ghc 7.4. So that's ok, except for the new ghc
bug I have not isolated and reported. Why does this simple bit of code
magnet the ghc bugs? :)
Also, the symlink touching code is currently broken, when used on utf-8
filenames in a non-utf-8 locale, or probably on any filename containing
undecodable bytes, and I temporarily commented it out.
I had not realized what a memory leak the lazy state monad could be,
although I have not seen much evidence of actual leaking in git-annex.
However, if running git-annex on a great many files, this could matter.
The additional Utility.State.changeState adds even more strictness,
avoiding a problem I saw in github-backup where repeatedly modifying
state built up a huge pile of thunks.
This drops the >>! and >>? with the nice low fixity. IfElse does have
undocumented >>=>>! and >>=>>? operators, but I deem that too fishy.
Anyway, using whenM and unlessM is easier; I sometimes mixed the operators
up.
This overrides the trust.log, and is overridden by the command-line trust
parameters.
It would have been nicer to have Logs.Trust.trustMap just look up the
configuration for all remotes, but a dependency loop prevented that
(Remotes depends on Logs.Trust in several ways). So instead, look up
the configuration when building remotes, storing it in the same forcetrust
field used for the command-line trust parameters.
Turns out that git will accept a .git/config containing an url with eg,
spaces in its name. Handle this by escaping the url if it's not valid.
This also fixes support for urls containing escaped characters like %20
for space. Before, the path from the url was not unescaped properly.
With --fast, unavailable local remotes are filtered out of the fast set.
This way, if there are local remotes, --fast always acts only on them,
and if none are mounted, acts on nothing. This consistency is better
than --fast acting on different remotes depending on what's mounted.
The describe function was only intended to generate a human-visible
description of a branch, but taking the base of a branch is a useful
operation to be able to do no matter the human-visible representation.
Converting a branch like refs/heads/master to refs/heads/origin/master
is also a useful operation, and under can do that.
Consider this git config --list case:
url.git+ssh://git@example.com/.insteadOf=gl
url.git+ssh://git@example.com/.insteadOf=shared
Since config is stored in a Map, only the last of the values for this key
was stored and available for use by the insteadOf code. But that
is wrong; git allows either "gl" or "shared" to be used in an url and
the insteadOf value to be substituted in.
To support this, it seems best to keep the existing config map as-is,
and add a second map that accumulates a list of multiple values for
config keys. This new fullconfig map can be used in the rare places where
multiple values for a key make sense, without needing to complicate
everything else.
Haskell's laziness and data sharing keep the overhead of adding
this second map low.
I was happily able to repurpose some code from Git.Filename to handle this.
I remember writing that code... a whole afternoon at a coffee shop, after
which I felt I'd struggled with Haskell and git, and sorta lost, in needing
to write this nasty peice of code. But was also pleased at the use of a
pair of functions and quickcheck that allowed me to get it 100% right.
So, turns out I not only got it right, but the code wasn't as special-purpose
as I'd feared. Yay!
A crash on parsing was fixed a while ago. This adds support for fully
correctly parsing multiline git config values, using git config --null.
Since git-annex-shell configlist uses normal git config output, I left in
support for that too; the two forms of config output can be easily
identified by the parser. Since configlist only prints the annex.uuid
config, there's no risk of multiline values there, so no need to change it.
Could have just used hGetContentsStrict here, but that would require
storing all the shas in memory. Since this is called at the end of a
git-annex run, it may have created a *lot* of shas, so I avoid that memory
use and stream them out like before.
Testing b9ac585454, it didn't find the
optimal union merge, the second sha was the one to use, at least in
the case I tried. Let's just try all shas to see if any can be reused.
I stopped using the expensive nub, so despite the use of sets to
sort/uniq file contents, this is probably as fast or faster than it
was before.
Tries to avoid generating a new object when the merged content has the same
lines that were in the old object.
I've noticed some merge commits that only move lines around, like this:
- 1323478057.181191s 1 be23c3ac-0ee5-11e0-b185-3b0f9b5b00c5
1323204972.062151s 1 87e06c7a-7388-11e0-ba07-03cdf300bd87
++1323478057.181191s 1 be23c3ac-0ee5-11e0-b185-3b0f9b5b00c5
Unsure if this will really save anything in practice, since it only looks
at one of the two old objects, and maybe I didn't pick the best one.
In git, a Ref can be a Sha, or a Branch, or a Tag. I added type aliases for
those. Note that this does not prevent mixing up of eg, refs and branches
at the type level. Since git really doesn't care, except rare cases like
git update-ref, or git tag -d, that seems ok for now.
There's also a tree-ish, but let's just use Ref for it. A given Sha or Ref
may or may not be a tree-ish, depending on the object type, so there seems
no point in trying to represent it at the type level.
Before, a merge was first calculated, by running various actions that
called git and built up a list of lines, which were at the end sent
to git update-index. This necessarily used space proportional to the size
of the diff between the trees being merged.
Now, lines are streamed into git update-index from each of the actions in
turn.
Runtime size of git-annex merge when merging 50000 location log files
drops from around 100 mb to a constant 4 mb.
Presumably it runs quite a lot faster, too.
This reduces the memory use of a merge by 1/3rd. The space leak was
apparently because the whole update-index input was generated strictly, not
lazily.
I wondered if the change to ByteStrings contributed to this, due to the
need to convert with L.pack here. But going back to the old code, I still
see a much similar leak, and worse performance besides due to it not using
ByteStrings.
The fix is to just hPutStr the lines repeatedly. (Note the \0 is written
separately, to avoid allocation overheads in adding it to the string.)
The Git.pipeWrite interface is probably just wrong for any large inputs to
git. This was the only place using it for input of any size.
There is still at least one other space leak in the merge code.
Many functions took the repo as their first parameter. Changing it
consistently to be the last parameter allows doing some useful things with
currying, that reduce boilerplate.
In particular, g <- gitRepo is almost never needed now, instead
use inRepo to run an IO action in the repo, and fromRepo to get
a value from the repo.
This also provides more opportunities to use monadic and applicative
combinators.
