reconcileStaged was doing a redundant scan to scannAnnexedFiles.
It would probably make sense to move the body of scannAnnexedFiles
into reconcileStaged, the separation does not really serve any purpose.
Sponsored-by: Dartmouth College's Datalad project
Commit 428c91606b made it need to do more
work in situations like switching between very different branches.
Compare with seekFilteredKeys which has a similar optimisation. Might be
possible to factor out the common part from these?
Sponsored-by: Dartmouth College's Datalad project
This is quite a subtle edge case, see the bug report for full details.
The second git diff is needed only when there's a merge conflict.
It would be possible to speed it up marginally by using
--diff-filter=Unmerged, but probably not enough to bother with.
Sponsored-by: Graham Spencer on Patreon
It makes sense to keep the key used by the old version of an
associated file, until the merge conflict is resolved.
Note that, since in this case git diff is being run with --index, it's
not possible to use -1 or -3, which would let the keys
associated with the new versions of the file also be added. That would
be better, because it's possible that the local modification to the file
that caused the merge conflict has not yet gotten its new key recorded
in the db.
Opened a bug about a case this is thus not able to address.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
There seems to be no reason to check the time here. I think it was
inherited from code in Database.Fsck, which does have a reason to commit
every few minutes. Removing that syscall speeds up a git-annex init
in a repo with 100000 annexed files by about 3 seconds.
Sponsored-by: Dartmouth College's Datalad project
git-annex test hung, at varying points depending
on when git decided to run the smudge clean filter.
Recent changes to reconcileStaged caused a deadlock, when git write-tree
for some reason decides to run the smudge clean filter. Which tries
to open the keys db, and blocks waiting for the lock file that its
grandparent has locked.
I don't know why git write-tree does that. It's supposed to only write a
tree from the index which needs no smudge/clean filtering.
I've verified that, in a situation where git write-tree runs the clean
filter, disabling the filter results in a tree being written that
contains the annex link, not eg, the worktree file content. So it seems
safe to disable the clean filter, but also this seems likely to be
working around a bug in git because it seems it is running the clean
filter in a situation where the object has already been cleaned.
Sponsored-by: Dartmouth College's Datalad project
When the keys db is opened for read, and did not exist yet, it used to
skip creating it, and return mempty values. But that prevents
reconcileStaged from populating associated files information in time for
the read. This fixes the one remaining case I know of where
the fix in a56b151f90 didn't work.
Note that, when there is a permissions error, it still avoids creating
the db and returns mempty for all queries. This does mean that
reconcileStaged does not run and so it may want to drop files that it
should not. However, presumably a permissions error on the keys database
also means that the user does not have permission to delete annex
objects, so they won't be able to drop the files anyway.
Sponsored-by: Dartmouth College's Datalad project
All code that uses associated files already deals with this problem,
which used to be worse. Unfortunately I was not able to entirely
eliminate it, although it happens in fewer cases now.
Eg, when git commit runs the smudge filter.
Commit 428c91606b introduced the crash,
as write-tree fails in those situations. Now it will work, and git-annex
always gets up-to-date information even in those situations. It does
need to do a bit more work, each time git-annex is run with the index
locked. Although if the index is unmodified from the last time
write-tree succeeded, that work is avoided.
Before only unlocked files were included.
The initial scan now scans for locked as well as unlocked files. This
does mean it gets a little bit slower, although I optimised it as well
as I think it can be.
reconcileStaged changed to diff from the current index to the tree of
the previous index. This lets it handle deletions as well, removing
associated files for both locked and unlocked files, which did not
always happen before.
On upgrade, there will be no recorded previous tree, so it will diff
from the empty tree to current index, and so will fully populate the
associated files, as well as removing any stale associated files
that were present due to them not being removed before.
reconcileStaged now does a bit more work. Most of the time, this will
just be due to running more often, after some change is made to the
index, and since there will be few changes since the last time, it will
not be a noticable overhead. What may turn out to be a noticable
slowdown is after changing to a branch, it has to go through the diff
from the previous index to the new one, and if there are lots of
changes, that could take a long time. Also, after adding a lot of files,
or deleting a lot of files, or moving a large subdirectory, etc.
Command.Lock used removeAssociatedFile, but now that's wrong because a
newly locked file still needs to have its associated file tracked.
Command.Rekey used removeAssociatedFile when the file was unlocked.
It could remove it also when it's locked, but it is not really
necessary, because it changes the index, and so the next time git-annex
run and accesses the keys db, reconcileStaged will run and update it.
There are probably several other places that use addAssociatedFile and
don't need to any more for similar reasons. But there's no harm in
keeping them, and it probably is a good idea to, if only to support
mixing this with older versions of git-annex.
However, mixing this and older versions does risk reconcileStaged not
running, if the older version already ran it on a given index state. So
it's not a good idea to mix versions. This problem could be dealt with
by changing the name of the gitAnnexKeysDbIndexCache, but that would
leave the old file dangling, or it would need to keep trying to remove
it.
smudge: Fix a case where an unlocked annexed file that annex.largefiles
does not match could get its unchanged content checked into git, due to git
running the smudge filter unecessarily.
When the file has the same inodecache as an already annexed file,
we can assume that the user is not intending to change how it's stored in
git.
Note that checkunchangedgitfile already handled the inverse case, where the
file was added to git previously. That goes further and actually sha1
hashes the new file and checks if it's the same hash in the index.
It would be possible to generate a key for the file and see if it's the
same as the old key, however that could be considerably more expensive than
sha1 of a small file is, and it is not necessary for the case I have, at
least, where the file is not modified or touched, and so its inode will
match the cache.
git-annex add was changed, when adding a small file, to remove the inode
cache for it. This is necessary to keep the recipe in
doc/tips/largefiles.mdwn for converting from annex to git working.
It also avoids bugs/case_where_using_pathspec_with_git-commit_leaves_s.mdwn
which the earlier try at this change introduced.
Values in AnnexRead can be read more efficiently, without MVar overhead.
Only a few things have been moved into there, and the performance
increase so far is not likely to be noticable.
This is groundwork for putting more stuff in there, particularly a value
that indicates if debugging is enabled.
The obvious next step is to change option parsing to not run in the
Annex monad to set values in AnnexState, and instead return a pure value
that gets stored in AnnexRead.
persistent stopped using askLogFunc, and the thing to use is askLoggerIO
from monad-logger. Bumped the dep to the first version that contained that.
Note that the i386ancient build uses a newer monad-logger than 0.3.10,
so the new versioned dep should not break it, and presumably nothing else
either.
This commit was sponsored by Noam Kremen on Patreon.
This solves the problem that import of such files gets confused and
converts them back to annexed files.
The import code already used GIT keys internally when it determined a
file should not be annexed. So now when it sees a GIT key that export
used, it already does the right thing.
This also means that even older version of git-annex can import and will
do the right thing, once a fixed version has exported. Still, there may
be other complications around upgrades; still need to think it all
through.
Moved gitShaKey and keyGitSha from Key to Annex.Export since they're
only used for export/import.
Documented GIT keys in backends, since they do appear in the git-annex
branch now.
This commit was sponsored by Graham Spencer on Patreon.
* add: Significantly speed up adding lots of non-large files to git,
by disabling the annex smudge filter when running git add.
* add --force-small: Run git add rather than updating the index itself,
so any other smudge filters than the annex one that may be enabled will
be used.
For reasons explained in the bug report.
Implemented using a persistent migration, which works fine. It may add a
little startup overhead when a remote is enabled that uses this, but
probably un-noticable.
On the next major version, it would be fine to delete this database,
and regenerate it from the git-annex branch information. Then this
change could be reverted.
Did nothing about adding back the data that got dropped from the db
due to the bug. Only the borg special remote was probably affected,
and it's not been released yet. rm -rf .git/annex/cidsdb does work.
Lots of nice wins from this in avoiding unncessary work, and I think
nothing got slower.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Broke a while ago during optimisation work, and not noticed since the flag
is disabled by default.
This commit was sponsored by Brock Spratlen on Patreon.
Clean build under ghc 8.8.3, which seems to do better at finding cases
where two imports both provide the same symbol, and warns about one of
them.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Avoid repeatedly opening keys db when accessing a local git remote and -J
is used.
What was happening was that Remote.Git.onLocal created a new annex state
as each thread started up. The way the MVar was used did not prevent that.
And that, in turn, led to repeated opening of the keys db, as well as
probably other extra work or resource use.
Also managed to get rid of Annex.remoteannexstate, and it turned out there
was an unncessary Maybe in the keysdbhandle, since the handle starts out
closed.
Remaining things needing converted are in the assistant, and Annex.Ssh.
Every other remaining call to createDirectoryIfMissing True has been
audited and is not relevant. The ones in Build/ of course don't get
included in the program. Others included eg, Remote.Tahoe and
Config.Files which both write to dotfiles under the home directory.
This is untested because of rain, also I am operating from truncated
copiler error messages in a bug report that also doesn't mention what the
library version is. Still, it should work.
May break builds with old ghc, in particular DerivingStrategies is
I think fairly new? The pragmas could be ifdefed if necessary. Works with
ghc 8.6.5.
This avoids hardcoding the sha size, so when git uses sha256, it will
output the full sha256 and not a truncation to 40 characters.
I reviewed git's history, and while there have been some
bugs with commands not supporting --no-abbrev (eg git diff --no-index
--no-abbrev was broken in git 2.1), none of the commands git-annex
uses will be impacted by those old bugs.
Git will eventually switch to sha2 and there will not be one single
shaSize anymore, but two (40 and 64).
Changed all parsers for git plumbing output to support both sizes of
shas.
One potential problem this does not deal with is, if somewhere in
git-annex it reads two shas from different sources, and compares them
to see if they're the same sha, it would fail if they're sha1 and sha256
of the same value. I don't know if that will really be a concern.
Remove dup definitions and just use the RawFilePath one. </> etc are
enough faster that it's probably faster than building a String directly,
although I have not benchmarked.
git-annex find is now RawFilePath end to end, no string conversions.
So is git-annex get when it does not need to get anything.
So this is a major milestone on optimisation.
Benchmarks indicate around 30% speedup in both commands.
Probably many other performance improvements. All or nearly all places
where a file is statted use RawFilePath now.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
Since the sqlite branch uses blobs extensively, there are some
performance benefits, ByteStrings now get stored and retrieved w/o
conversion in some cases like in Database.Export.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
This will speed up the common case where a Key is deserialized from
disk, but is then serialized to build eg, the path to the annex object.
Previously attempted in 4536c93bb2
and reverted in 96aba8eff7.
The problems mentioned in the latter commit are addressed now:
Read/Show of KeyData is backwards-compatible with Read/Show of Key from before
this change, so Types.Distribution will keep working.
The Eq instance is fixed.
Also, Key has smart constructors, avoiding needing to remember to update
the cached serialization.
Used git-annex benchmark:
find is 7% faster
whereis is 3% faster
get when all files are already present is 5% faster
Generally, the benchmarks are running 0.1 seconds faster per 2000 files,
on a ram disk in my laptop.
addAssociatedFileNewBench would sometimes pick a random number that a
previous call had already added. Using a MVar, make it always advance,
so the same behavior is benchmarked each time.
* benchmark: Changed --databases to take a parameter specifiying the size
of the database to benchmark.
* benchmark --databases: Display size of the populated database.
* benchmark --databases: Improve the "addAssociatedFile to (new)"
benchmark to really add new values, not overwriting old values.
The old db is cleaned up when a new incremental fsck is started.
The incremental fsck won't pick up where the old one left off, but I
consider this a minor enough thing that it can just be documented and
won't be a problem.
The test suite found a bug; select_ can fail now because a uniqueness
constrain has been added.
Now the test suite passes.
Also, I'm satisfied the changed PersistField instances work.
Looking over what changed, and what I've already tested, Key, FilePath,
and InodeCache are known working; ContentIdentifier is trivial
ByteString to blob; and SSha is trivial String to varchar. Both are
tested by the test suite. I've also tested the new FileSize and
EpochTime instances already, and they work.
Bearing in mind that these indexes are really uniqueness constraints
that just happen to also make sqlite generate indexes.
In Database.ContentIndentifier, the ContentIndentifiersKeyRemoteCidIndex
is fine as a uniqueness constraint because it contains all rows from the
table. The ContentIndentifiersCidRemoteIndex is also ok because there
can only be one key for a given (cid, uuid) combination.
In Database.Export, the new ExportTreeFileKeyIndex is the same pair as
the old ExportTreeKeyFileIndex (previously ExportTreeIndex). And
in Database.Keys.SQL, the new InodeCacheKeyIndex is the same pair as the
old KeyInodeCacheIndex.
This is a non-backwards compatable change, so not suitable for merging
w/o a annex.version bump and transition code. Not yet tested.
This improves performance of git-annex benchmark --databases
across the board by 10-25%, since eg Key roundtrips as a ByteString.
(serializeKey' produces a lazy ByteString, so there is still a
copy involved in converting it to a strict ByteString. It may be faster
to switch to using bytestring-strict-builder.)
FilePath and Key are both stored as blobs. This avoids mojibake in some
situations. It would be possible to use varchar instead, if persistent
could avoid converting that to Text, but it seems there is no good
way to do so. See doc/todo/sqlite_database_improvements.mdwn
Eliminated some ugly artifacts of using Read/Show serialization;
constructors and quoted strings are no longer stored in sqlite.
Renamed SRef to SSha to reflect that it is only ever a git sha,
not a ref name. Since it is limited to the characters in a sha,
it is not affected by mojibake, so still uses String.
Rescued from commit 11d6e2e260 which removed
db benchmarks in favor of benchmarking arbitrary git-annex commands. Which
is nice and general, but microbenchmarks are useful too.
Rescued from commit 11d6e2e260 which removed
db benchmarks in favor of benchmarking arbitrary git-annex commands. Which
is nice and general, but microbenchmarks are useful too.
The only good thing about it is it does not require a major version bump
to improve the database. That will need to happen at some point though.
Potentially very very slow in a large repository.
Ugly use of raw sql.
This solves the problem of sameas remotes trampling over per-remote
state. Used for:
* per-remote state, of course
* per-remote metadata, also of course
* per-remote content identifiers, because two remote implementations
could in theory generate the same content identifier for two different
peices of content
While chunk logs are per-remote data, they don't use this, because the
number and size of chunks stored is a common property across sameas
remotes.
External special remote had a complication, where it was theoretically
possible for a remote to send SETSTATE or GETSTATE during INITREMOTE or
EXPORTSUPPORTED. Since the uuid of the remote is typically generate in
Remote.setup, it would only be possible to pass a Maybe
RemoteStateHandle into it, and it would otherwise have to construct its
own. Rather than go that route, I decided to send an ERROR in this case.
It seems unlikely that any existing external special remote will be
affected. They would have to make up a git-annex key, and set state for
some reason during INITREMOTE. I can imagine such a hack, but it doesn't
seem worth complicating the code in such an ugly way to support it.
Unfortunately, both TestRemote and Annex.Import needed the Remote
to have a new field added that holds its RemoteStateHandle.
fsck --incremental/--more: Fix bug that prevented the incremental fsck
information from being updated every 5 minutes as it was supposed to be; it
was only updated after 1000 files were checked, which may be more files
that are possible to fsck in a given fsck time window.
Thanks to Peter Simons for help with analysis of this bug.
Auditing for other cases of the same mistake, the keys db also had it
backwards. This seems unlikely to really have been a problem;
it would need associated files updates etc to be coming in slowly for some
reason and then be interrupted to cause any problem.
IIRC the design of the keys db assumes that any interruped
operation will be restarted, and so it can lose any buffered database
updates safely.
Had a report of close throwing ErrorBusy on CIFS.
Retrying up to 16 seconds is a balance between hopefully waiting long
enough for the problem to clear up and waiting so long that git-annex seems
to hang.
The new dependency is free; persistent depends on unliftio-core.
Drop support for building with ghc older than 8.4.4, and with older
versions of serveral haskell libraries than will be included in Debian 10.
The only remaining version ifdefs in the entire code base are now a couple
for aws!
This commit should only be merged after the Debian 10 release.
And perhaps it will need to wait longer than that; it would make
backporting new versions of git-annex to Debian 9 (stretch) which
has been actively happening as recently as this year.
This commit was sponsored by Ilya Shlyakhter.
Fix bug that caused importing from a special remote to repeatedly download
unchanged files when multiple files in the remote have the same content.
Unfortunately, there's really no good way to remove a uniqueness constraint
from a sqlite database. The best that can be done is to make a new table
and copy the data over. But that would require using persistent's
migrations or raw sql, and I don't want to do either.
Instead, a sledgehammer approach: Renamed .git/annex/cid to
.git/annex/cids. When the new database doesn't exist, it will be populated
from the git-annex branch.
Noting deletes the old database. Don't want to delete it out from under
some long-running git-annex process that might be using it. It could
eventually be deleted. But this is such a new feature, probably few repos
have the database in any case.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
untested
This won't be super slow, but it does need to diff two likely large
trees, and since the git-annex branch rarely sits still, it will most
likely be run at the beginning of every import.
A possible speed improvement would be to only run this when the database
did not contain a ContentIdentifier. But that would only speed up
imports when there is no new version of a file on the special remote,
at most renames of existing files being imported.
A better speed improvement would be to record something in the git-annex
branch that indicates when an import has been run, and only do the diff
if the git-annex branch has record of a newer import than we've seen
before. Then, it would only run when there is in fact new
ContentIdentifier information available from a remote. Certianly doable,
but didn't want to complicate things yet.
Does not yet have a way to update with new information from the
git-annex branch, which will be needed when multiple repos are importing
from the same remote.
Somehow forgot about the case where the current export db tree is the
same one in the export log, and it warned about an export conflict when
getting a file in that situation. Of course it's no conflict at all!
This commit was sponsored by Jochen Bartl on Patreon.
Like the earlier fixed one in Command.Export, it occurred when the same
tree was exported by multiple clones. Previous fix was incomplete since
several other places looked at the list of exported trees to detect when
there was an export conflict. Added a single unified function to avoid
missing any places it needed to be fixed.
This commit was sponsored by mo on Patreon.
What these generate is not really suitable to be used as a filename,
which is why keyFile and fileKey further escape it. These are just
serializing Keys.
Also removed a quickcheck test that was very unlikely to test anything
useful, since it relied on random chance creating something that looks
like a serialized key. The other test is sufficient for testing what
that was intended to test anyway.
When an export conflict prevents accessing a special remote, be clearer
about what the problem is and how to resolve it.
This commit was sponsored by Trenton Cronholm on Patreon.
