Avoid creating transfer info file before transfer lock is created and
locked.
The wrong order for one thing caused transfer info to be overwritten
when a transfer was already in progress.
But worse, it caused checkTransfer to see the transfer info,
and so lock the transfer lock in order to verify the transfer was not in
progress. Which in a concurrent situation, prevented the transferrer
from locking the transfer lock, so it failed with "transfer already in
progress".
Note that the transferinfo command does not lock the transfer lock
before creating the transfer info. But, that's only run after
recvkey is running, and recvkey does lock the transfer lock, so that
seems more or less ok. (Other than being a super complicated legacy mess
that the P2P code has mostly obsoleted now.)
This commit was supported by the NSF-funded DataLad project.
Fix more places where files in .git/annex/ were written with modes that
did not take the core.sharedRepository config into account.
This commit was sponsored by Jeff Goeke-Smith on Patreon.
git grep writeFile finds some more that might also be problems, but
for now I've concentrated on .git/annex/ log files. There are certianly
cases where writeFile is not a problem too.
This commit was sponsored by mo on Patreon.
This avoids all the complication about redundant work discussed in
the previous try at fixing this. At the expense of needing each command
that could have the problem to be patched to simply wrap the action in
onlyActionOn once the key is known. But there do not seem to be many
such commands.
onlyActionOn' should not be used with a CommandStart (or CommandPerform),
although the types do allow it. onlyActionOn handles running the whole
CommandStart chain. I couldn't immediately see a way to avoid mistken
use of onlyActionOn'.
This commit was supported by the NSF-funded DataLad project.
After a false start, I found a fairly non-intrusive way to deal with it.
Although it only handles transfers -- there may be issues with eg
concurrent dropping of the same key, or other operations.
There is no added overhead when -J is not used, other than an added
inAnnex check. When -J is used, it has to maintain and check a small
Set, which should be negligible overhead.
It could output some message saying that the transfer is being done by
another thread. Or it could even display the same progress info for both
files that are being downloaded since they have the same content. But I
opted to keep it simple, since this is rather an edge case, so it just
doesn't say anything about the transfer of the file until the other
thread finishes.
Since the deferred transfer action still runs, actions that do more than
transfer content will still get a chance to do their other work. (An
example of something that needs to do such other work is P2P.Annex,
where the download always needs to receive the content from the peer.)
And, if the first thread fails to complete a transfer, the second thread
can resume it.
But, this unfortunately means that there's a risk of redundant work
being done to transfer a key that just got transferred.
That's not ideal, but should never cause breakage; the same
thing can occur when running two separate git-annex processes.
The get/move/copy/mirror --from commands had extra inAnnex checks added,
inside the download actions. Without those checks, the first thread
downloaded the content, and then the second thread woke up and
downloaded the same content redundantly.
move/copy/mirror --to is left doing redundant uploads for now. It
would need a second checkPresent of the remote inside the upload
to avoid them, which would be expensive. A better way to avoid
redundant work needs to be found..
This commit was supported by the NSF-funded DataLad project.
In my git-annex repos, I found some stale transfer info files
without lock files.
Pass a mode to tryLockExclusive, so it will create the lock file if
not present, and so not fail to clean up such transfer info files.
Normally, transfer info files are accompanied by a lock file.
But, when alwaysRunTransfer is used, the locking can fail
and it will still write the transfer info file. Perhaps there are other
cases too? Note that mkProgressUpdater's meter
writes to the transfer info file too, and it might be possible for
that meter to fire after runTransfer has cleaned up.
This commit was sponsored by andrea rota.
It was not getting old lines removed, because the tree graft confused
the updater, so it union merged from the previous git-annex branch,
which still contained the old lines. Fixed by carefully using setIndexSha.
This commit was supported by the NSF-funded DataLad project.
This breaks backwards compatibility, but only with unreleased versions of
git-annex, which I think is acceptable.
This commit was supported by the NSF-funded DataLad project.
This way, the temp files that might be left due to failure will be
cleaned up next time.
Also, nub the list of incomplete exports to avoid repeatedly adding the
same tree to it when running export repeatedly when it's failing.
This commit was supported by the NSF-funded DataLad project.
Don't allow "exporttree=yes" to be set when the special remote
does not support exports. That would be confusing since the user would
set up a special remote for exports, but `git annex export` to it would
later fail.
This commit was supported by the NSF-funded DataLad project.
Not yet used, but essential for resuming cleanly.
Note that, in normmal operation, only one commit is made to export.log
during an export; the incomplete version only gets to the journal and
is then overwritten.
This commit was supported by the NSF-funded DataLad project.
Straightforward enough, except for the needed belt-and-suspenders sanity
checks to avoid foot shooting due to exports not being key/value stores.
* Even when annex.verify=false, always verify from exports.
* Only get files from exports that use a backend that supports
checksum verification.
* Never trust exports, even if the user says to, because then
`git annex drop` would drop content if the export seemed to contain
a copy.
This commit was supported by the NSF-funded DataLad project.
So it will be available later and elsewhere, even after GC.
I first though to use git update-index to do this, but feeding it a line
with a tree object seems to always cause it to generate a git subtree
merge. So, fell back to using the Git.Tree interface to maniupulate the
trees, and not involving the git-annex branch index file at all.
This commit was sponsored by Andreas Karlsson.
Can be used to override the default timestamps used in log files in the
git-annex branch. This is a dangerous environment variable; use with
caution.
Note that this only affects writing to the logs on the git-annex branch.
It is not used for metadata in git commits (other env vars can be set for
that).
There are many other places where timestamps are still used, that don't
get committed to git, but do touch disk. Including regular timestamps
of files, and timestamps embedded in some files in .git/annex/, including
the last fsck timestamp and timestamps in transfer log files.
A good way to find such things in git-annex is to get for getPOSIXTime and
getCurrentTime, although some of the results are of course false positives
that never hit disk (unless git-annex gets swapped out..)
So this commit does NOT necessarily make git-annex comply with some HIPPA
privacy regulations; it's up to the user to determine if they can use it in
a way compliant with such regulations.
Benchmarking: It takes 0.00114 milliseconds to call getEnv
"GIT_ANNEX_VECTOR_CLOCK" when that env var is not set. So, 100 thousand log
files can be written with an added overhead of only 0.114 seconds. That
should be by far swamped by the actual overhead of writing the log files
and making the commit containing them.
This commit was supported by the NSF-funded DataLad project.
fsck already special-cased dead keys to make --all not report errors with
them, and it makes sense to also expand that to whereis. I think it makes
sense for dead keys to be skipped by all uses of --all, so mistakes can be
completely forgotten about and not come back to haunt us.
The speed impact of testing if the key is dead is negligible for fsck and
whereis, since they use the location log anyway and it gets cached.
This does slow down a few commands that support --all, in particular
metadata --all runs around 2x as slow. I don't think metadata
--all is often used though. It might slow down copy/move/mirror
--all and get --all.
log --all is not affected (does not use the normal --all machinery).
Dead keys will still be processed by --incomplete, --branch,
--failed, and --key. Although it would be unlikely for a dead key to
ave in incomplete or failed transfer. It seems to make perfect sense for
--branch to process keys on the branch, even if dead.
(fsck's special-casing of dead keys was left in, so if one of these options
causes a dead key to be fscked, there will be a nice message.)
This commit was supported by the NSF-funded DataLad project.
9c4650358c changed the Read instance for
Key.
I've checked all uses of that instance (by removing it and seeing what
breaks), and they're all limited to the webapp, except one.
That is GitAnnexDistribution's Read instance.
So, 9c4650358c would have broken upgrades
of git-annex from downloads.kitenet.net. Once the .info files there got
updated for a new release, old releases would have failed to parse them
and never upgraded.
To fix this, I found a way to make the .info files that contain
GitAnnexDistribution values be readable by the old version of git-annex.
This commit was sponsored by Ewen McNeill.
... to control the default behavior in all clones of a repository.
This includes a new Configurable data type, so the GitConfig type indicates
which values can be configured this way.
The implementation should be quite efficient; the config log is only read
once, and only when a Configurable value has not already been set by
git-config.
Indeed, it would be nice in the future to extend this, so that git-config
is itself only read on demand. Some commands may not need to look at the
git configuration at all.
This commit was sponsored by Trenton Cronholm on Patreon.
Turns out that Data.List.Utils.split is slow and makes a lot of
allocations. Here's a much simpler single character splitter that behaves
the same (even in wacky corner cases) while running in half the time and
75% the allocations.
As well as being an optimisation, this helps move toward eliminating use of
missingh.
(Data.List.Split.splitOn is nearly as slow as Data.List.Utils.split and
allocates even more.)
I have not benchmarked the effect on git-annex, but would not be surprised
to see some parsing of eg, large streams from git commands run twice as
fast, and possibly in less memory.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Docs say vicfg can configure everything from git-annex branch,
so it ought to configure numcopies.
Note that commenting out existing numcopies does not unset it.
This commit was sponsored by Thom May on Patreon.
ghc 8 added backtraces on uncaught errors. This is great, but git-annex was
using error in many places for a error message targeted at the user, in
some known problem case. A backtrace only confuses such a message, so omit it.
Notably, commands like git annex drop that failed due to eg, numcopies,
used to use error, so had a backtrace.
This commit was sponsored by Ethan Aubin.
This sped up git annex find --not --in web from 6.64s to 5.69s.
The optimised parser is probably more like 50% faster than the general one
it replaced.
Note that get --from foo --failed will get things that a previous get --from bar
tried and failed to get, etc. I considered making --failed only retry
transfers from the same remote, but it was easier, and seems more useful,
to not have the same remote requirement.
Noisy due to some refactoring into Types/
This fixes strange displays in some cases, including whereis showing
many duplicate locations, and showing more total copies than actually
exist.
It's unknown if that lead to data loss when eg, dropping. At the moment,
it seems unlikely it could, since the UUID with \r's appended is not the
same as a UUID without, and so no remote matches it.
It's also unknown if \r's can leak in on windows, perhaps when merging the
git-annex branch.
