Like import was using ActionItemWorkTreeFile, it's ok to use it for export,
even though it might not correspond with a file in the work tree.
And renamed it to ActionItemTreeFile to make that clearer.
Note that when an export has to rename files, it still uses
ActionItemOther, so file will still be null in that case, but as no file is
being transferred, that seems ok.
Missed this when implementing it because of the default case catching
the new constructor. So, removed that default case to make sure
future types of adjusted branches don't make the same mistake.
Complicated by git-annex addurl --fast which adds the file whose content
is not present, so it needs to stay unlocked when on such a branch.
This commit was sponsored by Brock Spratlen on Patreon.
* add: Significantly speed up adding lots of non-large files to git,
by disabling the annex smudge filter when running git add.
* add --force-small: Run git add rather than updating the index itself,
so any other smudge filters than the annex one that may be enabled will
be used.
MatchingKey is not the thing to use when matching on actual worktreee
files.
Fix reversion in 8.20201116 that made include= and exclude= in
preferred/required content expressions match a path relative to the current
directory, rather than the path from the top of the repository.
Warn when adding a annex symlink or pointer file that uses a key that is
not known to the repository, to prevent confusion if the user has copied it
from some other repository.
This commit was sponsored by Jake Vosloo on Patreon.
Anything that needs to examine the file content will fail to match,
or fall back to other available information. But the intent is that the
matcher be checked for matchNeedsFileContent and only be used if it does
not, so the exact behavior doesn't much matter as it should never
happen.
The real point of this is to not need to provide a dummy content file
when matching.
This commit was sponsored by Martin D on Patreon.
add, addurl, importfeed, import: Added --no-check-gitignore option
for finer grained control than using --force.
(--force is used for too many different things, and at least one
of these also uses it for something else. I would like to reduce
--force's footprint until it only forces drops or a few other data
losses. For now, --force still disables checking ignores too.)
addunused: Don't check .gitignores when adding files. This is a behavior
change, but I justify it by analogy with git add of a gitignored file
adding it, asking to add all unused files back should add them all back,
not skip some. The old behavior was surprising.
In Command.Lock and Command.ReKey, CheckGitIgnore False does not change
behavior, it only makes explicit what is done. Since these commands are run
on annexed files, the file is already checked into git, so git add won't
check ignores.
No behavior changes (hopefully), just adding SeekInput and plumbing it
through to the JSON display code for later use.
Over the course of 2 grueling days.
withFilesNotInGit reimplemented in terms of seekHelper
should be the only possible behavior change. It seems to test as
behaving the same.
Note that seekHelper dummies up the SeekInput in the case where
segmentPaths' gives up on sorting the expanded paths because there are
too many input paths. When SeekInput later gets exposed as a json field,
that will result in it being a little bit wrong in the case where
100 or more paths are passed to a git-annex command. I think this is a
subtle enough problem to not matter. If it does turn out to be a
problem, fixing it would require splitting up the input
parameters into groups of < 100, which would make git ls-files run
perhaps more than is necessary. May want to revisit this, because that
fix seems fairly low-impact.
Added annex.skipunknown git config, that can be set to false to change the
behavior of commands like `git annex get foo*`, to not skip over files/dirs
that are not checked into git and are explicitly listed in the command
line.
Significant complexity was needed to handle git-annex add, which uses some
git ls-files calls, but needs to not use --error-unmatch because of course
the files are not known to git.
annex.skipunknown is planned to change to default to false in a
git-annex release in early 2022. There's a todo for that.
Running `git annex add --force-small` on a modified submodule fails
when the submodule path is fed to hash-object. This failure is
unlikely to be triggered by a caller passing a submodule explicitly to
`git annex add` because there's nothing useful that annex-add can do
with a submodule. A more likely scenario for hitting this failure is
that the caller passes "." or a subdirectory to `annex-add` while a
submodule underneath the specified path happens to be modified.
addSmallOverridden already routes symbolic links through addFile
rather than using the custom hash-object/update-index call. The
latter is valid only for regular files, so extend this condition so
that everything that isn't a regular file goes through addFile. Doing
so avoids the above error because submodules come in as directories.
addSmallOverridden calls getFileStatus and then checks the result with
isSymbolicLink. getFileStatus dereferences symbolic links, so
isSymbolicLink will always return false (assuming the getFileStatus
call doesn't fail on a broken link). Use getSymbolicLinkStatus
instead.
options make it easier to override annex.largefiles configuration
(and potentially safer as it avoids bugs like the smudge bug fixed
in the last release)
Deleted some old comments that were posted to the man page discussing such
options.
Updated docs that used -c annex.largefiles to use the options.
Note that addSmallOverridden was needed to avoid the clean filter running
on the file. It would be possible to make addFile also update the index
directly, rather than going via git add. However, it was not necessary,
and I want to avoid breaking on some edge case, particularly if the code in
addSmallOverridden has some oversight.
Also, when annex.addunlocked is set and annex.largefiles does not match a file,
git annex add --force-large works, but git status will then show the file
as added, with a unstaged modification. The unstaged modification adds the
file to git. This is identical behavior to using -c annex.largefiles=nothing
when annex.addunlocked is set. This does not prevent committing what was
intended to be added. I have not gotten to the bottom of why git thinks
the file is modified and runs it through the clean filter in this case.
The git add behavior changes could be avoided if it turns out to be
really annoying, but then it would need to behave the old way when
annex.dotfiles=false and the new way when annex.dotfiles=true. I'd
rather not have the config option result in such divergent behavior as
`git annex add .` skipping a dotfile (old) vs adding to annex (new).
Note that the assistant always adds dotfiles to the annex.
This is surprising, but not new behavior. Might be worth making it also
honor annex.dotfiles, but I wonder if perhaps some user somewhere uses
it and keeps large files in a directory that happens to begin with a
dot. Since dotfiles and dotdirs are a unix culture thing, and the
assistant users may not be part of that culture, it seems best to keep
its current behavior for now.
* annex.addunlocked can be set to an expression with the same format used by
annex.largefiles, in case you want to default to unlocking some files but
not others.
* annex.addunlocked can be configured by git-annex config.
Added a git-annex-matching-expression man page, broken out from
tips/largefiles.
A tricky consequence of this is that git-annex add --relaxed
honors annex.addunlocked, but an expression might want to know the size
or content of an url, which it's not going to download. I decided it was
better not to fail, and just dummy up some plausible data in that case.
Performance impact should be negligible. The global config is already
loaded for annex.largefiles. The expression only has to be parsed once,
and in the simple true/false case, it should not do any additional work
matching it.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
No behavior changes, but this shows everywhere that a progress meter
could be displayed when hashing a file to add to the annex.
Many of the places don't make sense to display a progress meter though,
eg when importing the copy of the file probably swamps the hashing of
the file.
Rather than limiting it to PerformStage and CleanupStage, this opens it
up so any number of stages can be added as needed by commands.
Each concurrent command has a set of stages that it uses, and only
transitions between those can block waiting for a free slot in the
worker pool. Calling enteringStage for some other stage does not block,
and has very little overhead.
Note that while before the Annex state was duplicated on the first call
to commandAction, this now happens earlier, in startConcurrency.
That means that seek stage actions should that use startConcurrency
and then modify Annex state won't modify the state of worker threads
they then start. I audited all of them, and only Command.Seek
did so; prepMerge changes the working directory and so has to come
before startConcurrency.
Also, the remote list is built before duplicating the state, which means
that it gets built earlier now than it used to. This would only have an
effect of making commands that end up not needing to perform any actions
unncessary build the remote list (only when they're run with concurrency
enable), but that's a minor overhead compared to commands seeking
through the work tree and determining they don't need to do anything.
The goal is to be able to run CommandStart in the main thread when -J is
used, rather than unncessarily passing it off to a worker thread, which
incurs overhead that is signficant when the CommandStart is going to
quickly decide to stop.
To do that, the message it displays needs to be displayed in the worker
thread, after the CommandStart has run.
Also, the change will mean that CommandStart will no longer necessarily
run with the same Annex state as CommandPerform. While its docs already
said it should avoid modifying Annex state, I audited all the
CommandStart code as part of the conversion. (Note that CommandSeek
already sometimes runs with a different Annex state, and that has not been
a source of any problems, so I am not too worried that this change will
lead to breakage going forward.)
The only modification of Annex state I found was it calling
allowMessages in some Commands that default to noMessages. Dealt with
that by adding a startCustomOutput and a startingUsualMessages.
This lets a command start with noMessages and then select the output it
wants for each CommandStart.
One bit of breakage: onlyActionOn has been removed from commands that used it.
The plan is that, since a StartMessage contains an ActionItem,
when a Key can be extracted from that, the parallel job runner can
run onlyActionOn' automatically. Then commands won't need to worry about
this detail. Future work.
Otherwise, this was a fairly straightforward process of making each
CommandStart compile again. Hopefully other behavior changes were mostly
avoided.
In a few cases, a command had a CommandStart that called a CommandPerform
that then called showStart multiple times. I have collapsed those
down to a single start action. The main command to perhaps suffer from it
is Command.Direct, which used to show a start for each file, and no
longer does.
Another minor behavior change is that some commands used showStart
before, but had an associated file and a Key available, so were changed
to ShowStart with an ActionItemAssociatedFile. That will not change the
normal output or behavior, but --json output will now include the key.
This should not break it for anyone using a real json parser.
Fixes bug that caused git-annex to fail to add a file when another
git-annex process cleaned up the temp directory it was using.
Solution is just to push withOtherTmp out to a higher level, so that
the whole ingest process can be completed inside it.
But in the assistant, that was not practical to do, since withOtherTmp runs
in the Annex monad and the assistant does not. Worked around by introducing
a separate temp directory that only the assistant uses for lockdown.
Since only one assistant can run at a time, it's easy to clean up that
directory of old cruft at startup.
This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
What these generate is not really suitable to be used as a filename,
which is why keyFile and fileKey further escape it. These are just
serializing Keys.
Also removed a quickcheck test that was very unlikely to test anything
useful, since it relied on random chance creating something that looks
like a serialized key. The other test is sufficient for testing what
that was intended to test anyway.
This is groundwork for nested seek loops, eg seeking over all files and
then performing commandActions on a list of remotes, which can be done
concurrently.
This commit was sponsored by Boyd Stephen Smith Jr. on Patreon.
Added -z option to git-annex commands that use --batch, useful for
supporting filenames containing newlines.
It only controls input to --batch, the output will still be line delimited
unless --json or etc is used to get some other output. While git often
makes -z affect both input and output, I don't like trying them together,
and making it affect output would have been a significant complication,
and also git-annex output is generally not intended to be machine parsed,
unless using --json or a format option.
Commands that take pairs like "file key" still separate them with a space
in --batch mode. All such commands take care to support filenames with
spaces when parsing that, so there was no need to change it, and it would
have needed significant changes to the batch machinery to separate tose
with a null.
To make fromkey and registerurl support -z, I had to give them a --batch
option. The implicit batch mode they enter when not provided with input
parameters does not support -z as that would have complicated option
parsing. Seemed better to move these toward using the same --batch as
everything else, though the implicit batch mode can still be used.
This commit was sponsored by Ole-Morten Duesund on Patreon.
The new second pass sees the file as type changed because the first
pass's changes have typically not reached git yet. So, have to
explicitly check for unmodified files in the second pass.
Note that, if the file has been touched but not really modified,
the first pass will handle it, and so the second pass does nothing.
This commit was sponsored by Jochen Bartl on Patreon.
v6: When a file is unlocked but has not been modified, and the unlocking is
only staged, git-annex add did not lock it. Now it will, for consistency
with how modified files are handled and with v5.
Note the removal of the sameInodeCache check. Otherwise it would see
that the unmodified file is unmodified and stop there. That check seems to have
been copied from the direct mode branch. But, direct mode had a specific
reason to check for unmodified content, that does not apply to v6.
The second pass means there is potential for a race, eg the unlocked
file could be modified in between the first and second passes.
No problem with that, since both passes do the same thing.
This commit was sponsored by Jake Vosloo on Patreon.
When --batch is used with matching options like --in, --metadata, etc, only
operate on the provided files when they match those options. Otherwise, a
blank line is output in the batch protocol.
Affected commands: find, add, whereis, drop, copy, move, get
In the case of find, the documentation for --batch already said it honored
the matching options. The docs for the rest didn't, but it makes sense to
have them honor them. While this is a behavior change, why specify the
matching options with --batch if you didn't want them to apply?
Note that the batch output for all of the affected commands could
already output a blank line in other cases, so batch users should
already be prepared to deal with it.
git-annex metadata didn't seem worth making support the matching options,
since all it does is output metadata or set metadata, the use cases for
using it in combination with the martching options seem small. Made it
refuse to run when they're combined, leaving open the possibility for later
support if a use case develops.
This commit was sponsored by Brett Eisenberg on Patreon.
Added --json-error-messages option, which includes error messages in the
json output, rather than outputting them to stderr.
The actual rediretion of errors is not implemented yet, this is only
the docs and option plumbing.
This commit was supported by the NSF-funded DataLad project.
git annex add, git annex lock etc make multiple seek passes,
and each seek pass checked that files existed. That was unncessary
redundant work.
Fixed by adding a new WorkTreeItem type, make seek actions use it,
and check that the files exist when constructing it.
This commit was supported by the NSF-funded DataLad project.
Unlike git add -u, git annex add -u does not update the index for files
removed from the working tree. But then, "git add ." stages removals,
and "git annex add ." does not, so that's an existing divergence.
Seems that --update --batch would need to run git ls-files once per line of
batch input, which would surely be too slow, so just throw an error for
that.
This commit was supported by the NSF-funded DataLad project.
Keeping Text.JSON use for now, because it seems a better fit for most of
the commands, which don't use very structured JSON objects, but just output
whatever fields suites them. But this lets Aeson be used when a more
structured data type is available to serialize to JSON.
* add, addurl, import, importfeed: When in a v6 repository on a crippled
filesystem, add files unlocked.
* annex.addunlocked: New configuration setting, makes files always be
added unlocked. (v6 only)
