Works around this bug in unix-compat:
https://github.com/jacobstanley/unix-compat/issues/56
getFileStatus and other FilePath using functions in unix-compat do not do
UNC conversion on Windows.
Made Utility.RawFilePath use convertToWindowsNativeNamespace to do the
necessary conversion on windows to support long filenames.
Audited all imports of System.PosixCompat.Files to make sure that no
functions that operate on FilePath were imported from it. Instead, use
the equvilants from Utility.RawFilePath. In particular the
re-export of that module in Common had to be removed, which led to lots
of other changes throughout the code.
The changes to Build.Configure, Build.DesktopFile, and Build.TestConfig
make Utility.Directory not be needed to build setup. And so let it use
Utility.RawFilePath, which depends on unix, which cannot be in
setup-depends.
Sponsored-by: Dartmouth College's Datalad project
Combined with commit 0ffc59d341, this
fixes the case where there are duplicate files on the special remote,
and the first gets modified/deleted, while the second is still present.
directory, adb: Fixed a bug when importtree=yes, and multiple files in the
special remote have the same content, that caused it to refuse to get a
file from the special remote, incorrectly complaining that it had changed,
due to only accepting the inode+mtime of one file (that was since modified
or deleted) and not accepting the inode+mtime of other duplicate files.
Sponsored-by: Max Thoursie on Patreon
This partly fixes an issue where there are duplicate files in the
special remote, and the first file gets swapped with another duplicate,
or deleted. The swap case is fixed by this, the deleted case will need
other changes.
This makes retrieveExportWithContentIdentifier take a list of allowed
ContentIdentifier, same as storeExportWithContentIdentifier,
removeExportWithContentIdentifier, and
checkPresentExportWithContentIdentifier.
Of the special remotes that support importtree, borg is a special case
and does not use content identifiers, S3 I assume can't get mixed up
like this, directory certainly has the problem, and adb also appears to
have had the problem.
Sponsored-by: Graham Spencer on Patreon
WIP: This is mostly complete, but there is a problem: createDirectoryUnder
throws an error when annex.dbdir is set to outside the git repo.
annex.dbdir is a workaround for filesystems where sqlite does not work,
due to eg, the filesystem not properly supporting locking.
It's intended to be set before initializing the repository. Changing it
in an existing repository can be done, but would be the same as making a
new repository and moving all the annexed objects into it. While the
databases get recreated from the git-annex branch in that situation, any
information that is in the databases but not stored in the branch gets
lost. It may be that no information ever gets stored in the databases
that cannot be reconstructed from the branch, but I have not verified
that.
Sponsored-by: Dartmouth College's Datalad project
Some small wins, almost certianly swamped by the system calls, but still
worthwhile progress on the RawFilePath conversion.
Sponsored-by: Erik Bjäreholt on Patreon
Fix retrival of an empty file that is stored in a special remote with
chunking enabled.
The speculative chunk stuff caused a reversion by adding an empty list for
the empty file. Which is just wrong; the empty file is still stored on the
remote, and should be retrieved like any other file. It uses 1 chunk, so
`max 1` is the simple fix.
Sponsored-by: Noam Kremen on Patreon
Commit 36133f27c0 had a boolean flip in it,
aaargh.
Special remotes with importtree=yes or exporttree=yes are once again
treated as untrusted, since files stored in them can be deleted or modified
at any time.
Sponsored-by: Kevin Mueller on Patreon
None of the special remotes do it yet, but this lays the groundwork.
Added MustFinishIncompleteVerify so that, when an incremental verify is
started but not complete, it can be forced to finish it. Otherwise, it
would have skipped doing it when verification is disabled, but
verification must always be done when retrievin from export remotes
since files can be modified during retrieval.
Note that retrieveExportWithContentIdentifier doesn't support incremental
verification yet. And I'm not sure if it can -- it doesn't know the Key
before it downloads the content. It seems a new API call would need to
be split out of that, which is provided with the key.
Sponsored-by: Dartmouth College's Datalad project
This was needed when supporting old git-annex-shell that do not support
p2pstdio yet, in order to cleanly fall back to the old interface without
error messages being displayed. That is no longer supported, so simplify
to not intercept error messages.
Sponsored-by: Dartmouth College's DANDI project
git-lfs: Fix interoperability with gitlab's implementation of the git-lfs
protocol, which requests Content-Encoding chunked.
Sponsored-by: Dartmouth College's Datalad project
Rather than the error that occurred when trying to download the unchunked
content, which is less likely to actually be stored in the remote.
Sponsored-by: Boyd Stephen Smith Jr. on Patreon
* Removed support for accessing git remotes that use versions of
git-annex older than 6.20180312.
* git-annex-shell: Removed several commands that were only needed to
support git-annex versions older than 6.20180312.
(lockcontent, recvkey, sendkey, transferinfo, commit)
The P2P protocol was added in that version, and used ever since, so
this code was only needed for interop with older versions.
"git-annex-shell commit" is used by newer git-annex versions, though
unnecessarily so, because the p2pstdio command makes a single commit at
shutdown. Luckily, it was run with stderr and stdout sent to /dev/null,
and non-zero exit status or other exceptions are caught and ignored. So,
that was able to be removed from git-annex-shell too.
git-annex-shell inannex, recvkey, sendkey, and dropkey are still used by
gcrypt special remotes accessed over ssh, so those had to be kept.
It would probably be possible to convert that to using the P2P protocol,
but it would be another multi-year transition.
Some git-annex-shell fields were able to be removed. I hoped to remove
all of them, and the very concept of them, but unfortunately autoinit
is used by git-annex sync, and gcrypt uses remoteuuid.
The main win here is really in Remote.Git, removing piles of hairy fallback
code.
Sponsored-by: Luke Shumaker
This improves the borg special remote memory usage, by
letting it only load one archive's worth of filenames into memory at a
time, and building up a larger tree out of the chunks.
When a borg repository has many archives, git-annex could easily OOM
before. Now, it will use only memory proportional to the number of
annexed keys in an archive.
Minor implementation wart: Each new chunk re-opens the content
identifier database, and also a new vector clock is used for each chunk.
This is a minor innefficiency only; the use of continuations makes
it hard to avoid, although putting the database handle into a Reader
monad would be one way to fix it.
It may later be possible to extend the ImportableContentsChunkable
interface to remotes that are not third-party populated. However, that
would perhaps need an interface that does not use continuations.
The ImportableContentsChunkable interface currently does not allow
populating the top of the tree with anything other than subtrees. It
would be easy to extend it to allow putting files in that tree, but borg
doesn't need that so I left it out for now.
Sponsored-by: Noam Kremen on Patreon
RemoteGitConfig parsing looks for annex.bwlimit when a remote
does not have a per-remote config for it, so no need for a separate
gobal config.
Sponsored-by: Svenne Krap on Patreon
Added annex.bwlimit and remote.name.annex-bwlimit config that works for git
remotes and many but not all special remotes.
This nearly works, at least for a git remote on the same disk. With it set
to 100kb/1s, the meter displays an actual bandwidth of 128 kb/s, with
occasional spikes to 160 kb/s. So it needs to delay just a bit longer...
I'm unsure why.
However, at the beginning a lot of data flows before it determines the
right bandwidth limit. A granularity of less than 1s would probably improve
that.
And, I don't know yet if it makes sense to have it be 100ks/1s rather than
100kb/s. Is there a situation where the user would want a larger
granularity? Does granulatity need to be configurable at all? I only used that
format for the config really in order to reuse an existing parser.
This can't support for external special remotes, or for ones that
themselves shell out to an external command. (Well, it could, but it
would involve pausing and resuming the child process tree, which seems
very hard to implement and very strange besides.) There could also be some
built-in special remotes that it still doesn't work for, due to them not
having a progress meter whose displays blocks the bandwidth using thread.
But I don't think there are actually any that run a separate thread for
downloads than the thread that displays the progress meter.
Sponsored-by: Graham Spencer on Patreon
IncrementalVerifier moved to Utility.Hash, which will let Utility.Url
use it later.
It's perhaps not really specific to hashing, but making a separate
module just for the data type seemed unncessary.
Sponsored-by: Dartmouth College's DANDI project
This fixes the recent reversion that annex.verify is not honored,
because retrieveChunks was passed RemoteVerify baser, but baser
did not have export/import set up.
Sponsored-by: Dartmouth College's DANDI project
Added fileRetriever', which will let the remaining special remotes
eventually also support incremental verify.
Sponsored-by: Dartmouth College's DANDI project
Now it's run in VerifyStage.
I thought about keeping the file handle open, and resuming reading where
tailVerify left off. But that risks leaking open file handles, until the
GC closes them, if the deferred verification does not get resumed. Since
that could perhaps happen if there's an exception somewhere, I decided
that was too unsafe.
Instead, re-open the file, seek, and resume.
Sponsored-by: Dartmouth College's DANDI project
It uses tailVerify to hash the file while it's being written.
This is able to sometimes avoid a separate checksum step. Although
if the file gets written quickly enough, tailVerify may not see it
get created before the write finishes, and the checksum still happens.
Testing with the directory special remote, incremental checksumming did
not happen. But then I disabled the copy CoW probing, and it did work.
What's going on with that is the CoW probe creates an empty file on
failure, then deletes it, and then the file is created again. tailVerify
will open the first, empty file, and so fails to read the content that
gets written to the file that replaces it.
The directory special remote really ought to be able to avoid needing to
use tailVerify, and while other special remotes could do things that
cause similar problems, they probably don't. And if they do, it just
means the checksum doesn't get done incrementally.
Sponsored-by: Dartmouth College's DANDI project
Simply feed each chunk in turn to the incremental verifier.
When resuming an interrupted retrieve, it does not do incremental
verification. That would need to read the file, up to the resume point,
and feed it to the incremental verifier. That seems easy to get wrong.
Also it would mean extra work done before the transfer can start. Which
would complicate displaying progress, and would perhaps not appear to the
user as if it was resuming from where it left off. Instead, in that
situation, return UnVerified, and let the verification be done in a
separate pass.
Granted, Annex.CopyFile does manage all that, but it's not complicated
by dealing with chunks too.
Sponsored-by: Dartmouth College's DANDI project
Several special remotes verify content while it is being retrieved,
avoiding a separate checksum pass. They are: S3, bup, ddar, and
gcrypt (with a local repository).
Not done when using chunking, yet.
Complicated by Retriever needing to change to be polymorphic. Which in turn
meant RankNTypes is needed, and also needed some code changes. The
change in Remote.External does not change behavior at all but avoids
the type checking failing because of a "rigid, skolem type" which
"would escape its scope". So I refactored slightly to make the type
checker's job easier there.
Unfortunately, directory uses fileRetriever (except when chunked),
so it is not amoung the improved ones. Fixing that would need a way for
FileRetriever to return a Verification. But, since the file retrieved
may be encrypted or chunked, it would be extra work to always
incrementally checksum the file while retrieving it. Hm.
Some other special remotes use fileRetriever, and so don't get incremental
verification, but could be converted to byteRetriever later. One is
GitLFS, which uses downloadConduit, which writes to the file, so could
verify as it goes. Other special remotes like web could too, but don't
use Remote.Helper.Special and so will need to be addressed separately.
Sponsored-by: Dartmouth College's DANDI project
This eliminates the distinction between decodeBS and decodeBS', encodeBS
and encodeBS', etc. The old implementation truncated at NUL, and the
primed versions had to do extra work to avoid that problem. The new
implementation does not truncate at NUL, and is also a lot faster.
(Benchmarked at 2x faster for decodeBS and 3x for encodeBS; more for the
primed versions.)
Note that filepath-bytestring 1.4.2.1.8 contains the same optimisation,
and upgrading to it will speed up to/fromRawFilePath.
AFAIK, nothing relied on the old behavior of truncating at NUL. Some
code used the faster versions in places where I was sure there would not
be a NUL. So this change is unlikely to break anything.
Also, moved s2w8 and w82s out of the module, as they do not involve
filesystem encoding really.
Sponsored-by: Shae Erisson on Patreon
The goal is that Database.Keys be able to use it; it can't use
Annex.Content.Presence due to an import loop.
Several other things also needed to be moved to Annex.Verify as a
conseqence.
Which could happen occasionally before when concurrency is enabled.
While not much of a problem when it did happen, better to avoid it. Also,
since it seems likely the gpg-agent sometimes fails in such a situation,
this makes it not happen when running a single git-annex command with
concurrency enabled.
This commit was sponsored by Jake Vosloo on Patreon.
This fixes fsck of a remote that uses chunking displaying
(checking remotename) (checking remotename)" for every chunk.
Also, some remotes displayed the message, and others did not, with no
consistency. It was originally displayed only when accessing remotes
that were expensive or might involve a password prompt, I think, but
nothing in the API said when to do it so it became an inconsistent mess.
Originally I thought fsck should always display it. But it only displays
in fsck --from remote, so the user knows the remote is being accessed,
so there is no reason to tell them it's accessing it over and over.
It was also possible for git-annex move to sometimes display it twice,
due to checking if content is present twice. But, the user of move
specifies --from/--to, so it does not need to display when it's
accessing the remote, as the user expects it to access the remote.
git-annex get might display it, but only if the remote also supports
hasKeyCheap, which is really only local git remotes, which didn't
display it always; and in any case nothing displayed it before hasKeyCheap,
which is checked first, so I don't think this needs to display it ever.
mirror is like move. And that's all the main places it would have been
displayed.
This commit was sponsored by Jochen Bartl on Patreon.
If it's passed a ConfigKey such as annex.version, avoid returning
an empty remote name and return Nothing instead. Also, foo.bar.baz is
not treated as a remote named "bar".
Had to add to AnnexRead an indication of whether debugging is enabled.
Could have just made setupConsole not install a debug output action that
outputs, and have enableDebug be what installs that, but then in the
common case where there is no debug selector, and so all debug output is
selected, it would run the debug output action every time, which entails
an IORef access. Which would make fastDebug too slow..
This uses a DebugSelector, rather than debug levels, which will allow
for a later option like --debug-from=Process to only
see debuging about running processes.
The module name that contains the thing being debugged is used as the
DebugSelector (in most cases; does not need to be a hard and fast rule).
Debug calls were changed to add that. hslogger did not display
that first parameter to debugM, but the DebugSelector does get
displayed.
Also fastDebug will allow doing debugging in places that are used in
tight loops, with the DebugSelector coming from the Annex Reader
essentially for free. Not done yet.
Note that a key with no size field that is hard linked will
result in listImportableContents reporting a file size of 0,
rather than the actual size of the file. One result is that
the progress meter when getting the file will seem to get stuck
at 100%. Another is that the remote's preferred content expression,
if it tries to match against file size, will treat it as an empty file.
I don't see a way to improve the latter behavior, and the former behavior
is a minor enough problem.
This commit was sponsored by Jake Vosloo on Patreon.
Keys stored on the filesystem are mangled by keyFile to avoid problem
chars. So, that mangling has to be reversed when parsing files from a
borg backup back to a key.
The directory special remote also so mangles them. Some other special
remotes do not; eg S3 just serializes the key -- but S3 object names are
not limited to filesystem valid filenames anyway, so a S3 server must
not map them directly to files in any case. It seems unlikely that a
borg backup of some such special remote will get broken by this change.
This commit was sponsored by Graham Spencer on Patreon.
When autoenabling special remotes of type S3, weddav, or glacier, do not
take login credentials from environment variables, as the user may not be
expecting the autoenable to happen, and may have those set for other
purposes.
Avoiding using a callback simplifies this and should make it easier to
implement incremental checksumming, which will need to happen partly in
writeRetrievedContent and partly in retrieveChunks.
Checksum as content is received from a remote git-annex repository, rather
than doing it in a second pass.
Not tested at all yet, but I imagine it will work!
Not implemented for any special remotes, and also not implemented for
copies from local remotes. It may be that, for local remotes, it will
suffice to use rsync, rely on its checksumming, and simply return Verified.
(It would still make a checksumming pass when cp is used for COW, I guess.)
This code I'm reverting works. But it has a problem: The export db and
log and the ContentIdentifier db and log still list the content as being
stored in the remote. So when I ran borg create again and stored the
content in borg again in a new archive, git-annex sync noticed that, but
since it didn't update the tree for the old archives, it then thought
the content that had been removed from them was still in them, and so
git-annex get failed in an ugly way:
Include pattern 'tmp/x/.git/annex/objects/pX/ZJ/SHA256E-s0--e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855/SHA256E-s0--e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855' never matched.
[2020-12-28 16:40:44.878952393] process [933616] done ExitFailure 1
user error (borg ["extract","/tmp/b::abs4","tmp/x/.git/annex/objects/pX/ZJ/SHA256E-s0--e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855/SHA256E-s0--e3b0c44298fc1c149afbf4c8996fb92427ae41e4649b934ca495991b7852b855"] exited 1)
It does not seem worth it to update the git tree for the export when dropping
content, that would make drop of many files very expensive in git tree objects
created. So, let's not support this I suppose..
