Fix bug that made creds not be stored in git when a special remote was
initialized with gpg encryption, but without an explicit embedcreds=yes.
(Yet nother regression introduced in version 7.20200202.7. 5th so far.)
* Improve display of problems auto-initializing or upgrading local git
remotes.
* When a local git remote cannot be initialized because it has no
git-annex branch or a .noannex file, avoid displaying a message about it.
The ContentIdentifier can contain almost anything, so could have characters
that are not fit for the filesystem, or might be longer than a key usually
is, or contain a newline, or .... genKeyName deals with those problems.
This should not present a back-compat issue, because this is a temporary
key used while downloading the imported file, before the real key for it
can be generated.
Some recent changes to use mask missed that async exceptions can still
be thrown inside it. The goal is to make sure a block of cleanup code
runs entirely, w/o being interrupted by an async exception, so use
uninterruptibleMask.
Also, converted a few to bracket, which is nicer.
Audited for openFile and openFd, and this fixes all the ones I found
where an async exception could prevent the file getting closed.
Except for the lock pool, which is a whole other can of worms.
Except for the assistant, which I think may use them between threads?
Most of the uses of SomeException were already catching only async exceptions.
But I did find a few places that were accidentially catching them.
This handles all createProcessSuccess callers, and aside from process
pools, the complete conversion of all process running to async exception
safety should be complete now.
Also, was able to remove from Utility.Process the old API that I now
know was not a good idea. And proof it was bad: The code size went *down*,
despite there being a fair bit of boilerplate for some future API to
reduce.
This handles all sites where checkSuccessProcess/ignoreFailureProcess
is used, except for one: Git.Command.pipeReadLazy
That one will be significantly more work to convert to bracketing.
(Also skipped Command.Assistant.autoStart, but it does not need to
shut down the processes it started on exception because they are
git-annex assistant daemons..)
forceSuccessProcess is done, except for createProcessSuccess.
All call sites of createProcessSuccess will need to be converted
to bracketing.
(process pools still todo also)
Not yet 100% done, so far I've grepped for waitForProcess and converted
everything that uses that to start the process with withCreateProcess.
Except for some things like P2P.IO and Assistant.TransferrerPool,
and Utility.CoProcess, that manage a pool of processes. See #2
in https://git-annex.branchable.com/todo/more_extensive_retries_to_mask_transient_failures/#comment-209f8a8c38e63fb3a704e1282cb269c7
for how those will need to be dealt with.
checkSuccessProcess, ignoreFailureProcess, and forceSuccessProcess calls waitForProcess, so
callers of them will also need to be dealt with, and have not been yet.
Added annex.skipunknown git config, that can be set to false to change the
behavior of commands like `git annex get foo*`, to not skip over files/dirs
that are not checked into git and are explicitly listed in the command
line.
Significant complexity was needed to handle git-annex add, which uses some
git ls-files calls, but needs to not use --error-unmatch because of course
the files are not known to git.
annex.skipunknown is planned to change to default to false in a
git-annex release in early 2022. There's a todo for that.
Try to enable special remotes configured with autoenable=yes when git-annex
auto-initialization happens in a new clone of an existing repo. Previously,
git-annex init had to be explicitly run to enable them. That was a bit of a
wart of a special case for users to need to keep in mind.
Special remotes cannot display anything when autoenabled this way, to avoid
interfering with the output of git-annex query commands.
Any error messages will be hidden, and if it fails, nothing is displayed.
The user will realize the remote isn't enable when they try to use it,
and can run git-annex init manually then to try the autoenable again and
see what failed.
That seems like a reasonable approach, and it's less complicated than
communicating something across a pipe in order to display it as a side
message. Other reason not to do that is that, if the first command the
user runs is one like git-annex find that has machine readable output,
any message about autoenable failing would need to not be displayed anyway.
So better to not display a failure message ever, for consistency.
(Had to split out Remote.List.Util to avoid an import cycle.)
retrieveExport is part of ongoing transition to make remote methods
throw exceptions, rather than silently hide them.
getKey very rarely fails, and when it does it's always for the same reason
(user configured annex.backend to url for some reason). So, this will
avoid dealing with Nothing everywhere it's used.
This commit was sponsored by Ilya Shlyakhter on Patreon.
When storing content on remote fails, always display a reason why.
Since the Storer used by special remotes already did, this mostly affects
git remotes, but not entirely. For example, if git-lfs failed to connect to
the endpoint, it used to silently return False.
* addurl --preserve-filename: New option, uses server-provided filename
without any sanitization, but with some security checking.
Not yet implemented for remotes other than the web.
* addurl, importfeed: Avoid adding filenames with leading '.', instead
it will be replaced with '_'.
This might be considered a security fix, but a CVE seems unwattanted.
It was possible for addurl to create a dotfile, which could change
behavior of some program. It was also possible for a web server to say
the file name was ".git" or "foo/.git". That would not overrwrite the
.git directory, but would cause addurl to fail; of course git won't
add "foo/.git".
sanitizeFilePath is too opinionated to remain in Utility, so moved it.
The changes to mkSafeFilePath are because it used sanitizeFilePath.
In particular:
isDrive will never succeed, because "c:" gets munged to "c_"
".." gets sanitized now
".git" gets sanitized now
It will never be null, because sanitizeFilePath keeps the length
the same, and splitDirectories never returns a null path.
Also, on the off chance a web server suggests a filename of "",
ignore that, rather than trying to save to such a filename, which would
fail in some way.
addurl: When run with --fast on an url that
annex.security.allowed-ip-addresses prevents accessing, display a more
useful message.
(Also importfeed --fast potentially.)
Limited to min of -JN or number of CPU cores, because it will often be
CPU bound, once it's read the gitignore file for a directory.
In some situations it's more disk bound, but in any case it's unlikely
to be the main bottleneck that -J is used to avoid. Eg, when dropping,
this is used for numcopies checks, but the main bottleneck will be
accessing the remotes to verify presence. So the user might decide to
-J32 that, but having 32 check-attr processes would just waste however
many filehandles they open, and probably worsen their performance due to
CPU contention.
Note that, I first tried just letting up to the -JN be started. However,
even when it's no bottleneck at all, that still results in all of them
being started. Why? Well, all the worker threads start up nearly
simulantaneously, so there's a thundering herd..
Avoid running a large number of git cat-file child processes when run with
a large -J value.
This implementation takes care to avoid adding any overhead to git-annex
when run without -J. When run with -J, there is a small bit of added
overhead, to manipulate the resource pool. That optimisation added a
fair bit of complexity.
This does mean that RemoteDaemon.Transport.Tor's call runs it, otherwise
no change, but this is groundwork for doing more such expensive actions
in dupState.
Fixes a failure mode where git-annex sync would try to run git-annex and
complain that it failed to find it in ~/.config/git-annex/program or PATH,
when there was a git-annex in /usr/bin/, but the original one was run
from elsewhere (eg, ~/bin) and happened not to be present any longer.
Now, it will fall back to using git-annex from PATH in such a case.
Which might fail due to some version incompatability, but still better
than a misleading error message.
Also made readProgramFile only read the file, not look for git-annex in
PATH as a fallback. That fallback may have confused Assistant.Upgrade,
which really wants the value from the file.
The journal read optimisation in aeca7c220 later got fixed in eedd73b84
to stage and commit any files that were left in the journal by a
previous git-annex run. That's necessary for the optimisation to work
correctly. But it also meant that alwayscommit=false started committing
the previous git-annex processes journalled changes, which defeated the
purpose of the config setting entirely.
So, disable the optimisation when alwayscommit=false, leaving the
files in the journal and not committing them. See my comments on the bug
report for why this seemed the best approach.
Also fixes a problem when annex.merge-annex-branches=false and there
are changes in the journal. That config indirectly prevents committing
the journal. (Which seems a bit odd given its name, but it always has..)
So, when there were changes in the journal, perhaps left there due to
alwayscommit=false being set before, the optimisation would prevent
git-annex from reading the journal files, and it would operate with out
of date information.
This change does impact git-annex config
eg "git annex config --set annex.addunlocked on"
will store "on" and new git-annex will understand that value, while
old git-annex will error:
git-annex: bad annex.addunlocked configuration in git annex config:
Parse failure: near "on"
That seems acceptable.
Not special remote configs that are only documented as =true or =false
however. Having git-annex support other values for those would break
backwards compatability when used with old versions of git-annex. And
older versions ignore invalid special remote configs.. That would not
be a good combination.
Git has an obnoxious special case in git config, a line "foo" is the same
as "foo = true". That means there is no way to examine the output of
git config and tell if it was run with --null or not, since a "foo"
in the first line could be such a boolean, or could be followed by its
value on the next line if --null were used.
So, rather than trying to do such a detection, track the style of config
at all the points where it's generated.
aeca7c2207 was predicated on the
assumption that updateTo would stage any journal files, but in one case
it did not actually do so. The test suite happened to expose the bug.
The only price paid is one additional MVar read per write to the journal.
Presumably writing a journal file dominiates over a MVar read time by
several orders of magnitude.
--batch does not get the speedup because then it needs to notice when
another process has made a change. Also made the assistant and other damon
modes bypass the optimisation, which would not help them anyway.
Improve git-annex's ability to find the path to its program, especially
when it needs to run itself in another repo to upgrade it.
Some parts of the code used readProgramFile, probably because I forgot that
programPath exists.
I noticed this when a git-annex auto-upgrade failed because it was running
git-annex upgrade --autoonly, but the code to run git-annex used
readProgramFile, which happened to point to an older build of git-annex.
This was originally added so that unannex could prevent the hook from
running while files were in a state that the hook would interpret as
old-style unlocked and so would lock.
Now that's gone, so the only thing the hook was preventing was two
pre-commit processes running simulantaneously. But such concurrency
is normal in git-annex and should not be a problem.
Does mean that .git/hooks/pre-commit-annex might run more concurrently,
that seems the only risk of it causing any problems.
This means it will still be a .git file when git-annex init runs. That's
ok, the repo probably contains no annexed objects yet, and even if it does,
git-annex init does not care if symlinks in the worktree don't point to the
objects.
I made init, at the end, run the conversion code. Not really necessary
because the next git-annex command could do it just as well. But, this
avoids commands that don't normally write to the repo needing to write to
it, which might avoid some problem or other, and seems worth avoiding
generally.
Since it was used on both worktree and .git/annex files, split into
multiple functions.
In passing, this also improves permissions of created directories in
.git/annex, using createAnnexDirectory on those.
It will create foo/.git/annex/, but not foo/.git/ and not foo/.
This will avoid it creating an empty path to a repo when a drive is
yanked out and the mount point goes away, for example.
git-annex config: Only allow configs be set that are ones git-annex
actually supports reading from repo-global config, to avoid confused users
trying to set other configs with this.
It's important that it be clear that it overrides a config, such that
reloading the git config won't change it, and in particular, setConfig
won't change it.
Most of the calls to changeGitConfig were actually after setConfig,
which was redundant and unncessary. So removed those.
The only remaining one, besides --debug, is in the handling of
repository-global config values. That one's ok, because the
way mergeGitConfig is implemented, it does not override any value that
is set in git config. If a value with a repo-global setting was passed
to setConfig, it would set it in the git config, reload the git config,
re-apply mergeGitConfig, and use the newly set value, which is the right
thing.
Fix serious regression in gcrypt and encrypted git-lfs remotes.
Since version 7.20200202.7, git-annex incorrectly stored content
on those remotes without encrypting it.
Problem was, Remote.Git enumerates all git remotes, including git-lfs
and gcrypt. It then dispatches to those. So, Remote.List used the
RemoteConfigParser from Remote.Git, instead of from git-lfs or gcrypt,
and that parser does not know about encryption fields, so did not
include them in the ParsedRemoteConfig. (Also didn't include other
fields specific to those remotes, perhaps chunking etc also didn't
get through.)
To fix, had to move RemoteConfig parsing down into the generate methods
of each remote, rather than doing it in Remote.List.
And a consequence of that was that ParsedRemoteConfig had to change to
include the RemoteConfig that got parsed, so that testremote can
generate a new remote based on an existing remote.
(I would have rather fixed this just inside Remote.Git, but that was not
practical, at least not w/o re-doing work that Remote.List already did.
Big ugly mostly mechanical patch seemed preferable to making git-annex
slower.)
