When the submodule's parent repo has an adjusted unlocked branch,
it gets cloned by git, but git checks out master. git annex init then
fails because it wants to enter the adjusted branch, but:
adjusted branch adjusted/master(unlocked) already exists.
Aborting because that branch may have changes that have not yet reached master
Note that init actually then exits 0, leaving master checked out.
This could also happen, absent submodules, if the parent repo has
an adjusted unlocked branch, but it is not checked out. In the more common
case where that branch is checked out, the clone uses the same branch,
so no problem.
The choices to fix this:
* Init could delete the existing adjusted branch, and re-adjust.
But then running init inside an adjusted branch on a crippled filesystem
would lose any changes that have not been synced back to master.
* Init could sync any changes back to master, but that would be very surprising
behavior for it.
* Init could simply check out the existing adjusted branch. If the branch
is diverged from master, well, sync will sort that out later.
This mirrors the behavior of cloning a repo that has an adjusted branch
checked out that has not yet been synced back to master.
Picked this choice.
Prevents merging the import from deleting the non-preferred files from
the branch it's merged into.
adjustTree previously appended the new list of items to the old, which
could result in it generating a tree with multiple files with the same
name. That is not good and confuses some parts of git. Gave it a
function to resolve such conflicts.
That allowed dealing with the problem of what happens when the import
contains some files (or subtrees) with the same name as files that were
filtered out of the export. The files from the import win.
* Switch to using .git/annex/othertmp for tmp files other than partial
downloads, and make stale files left in that directory when git-annex
is interrupted be cleaned up promptly by subsequent git-annex processes.
* The .git/annex/misctmp directory is no longer used and git-annex will
delete anything lingering in there after it's 1 week old.
Also, in Annex.Ingest, made the filename it uses in the tmp dir be
prefixed with "ingest-" to avoid potentially using a filename used by
some other code.
* init: When a crippled filesystem causes an adjusted unlocked branch to
be used, set repo version to 7, which it neglected to do before.
* init: When on a crippled filesystem, and the git version is too old
to use an adjusted unlocked branch, fall back to using direct mode.
This commit was sponsored by Ilya Shlyakhter on Patreon.
It was trying to git annex adjust when in a direct mode repo, and that
of course fails. What I don't understand though, is how the test suite
managed to work before, when it was clearly checking the wrong thing.
Since the right way to fix it was obvious, I have not bisected.
This work is supported by the NIH-funded NICEMAN (ReproNim TR&D3) project.
This completes initial support for --hide-missing, although the
assistant still needs to be updated and it perhaps needs to be sped up,
and maybe there needs to be a way for git-annex get to operate on
missing files. Opened some more todos for those things.
This commit was sponsored by Henrik Riomar.
Both Command.Sync and Annex.Ingest had their own versions of this.
The one in Annex.Ingest used Git.Branch.currentUnsafe, but does not seem
to need it. That is only checking to see if it's in an adjusted unlocked
branch, and when in an adjusted branch, the branch does in fact exist,
so the added check that Git.Branch.current does is fine.
This commit was sponsored by Denis Dzyubenko on Patreon.
* At long last there's a way to hide annexed files whose content
is missing from the working tree: git-annex adjust --hide-missing
* When already in an adjusted branch, running git-annex adjust
again will update the branch as needed. This is mostly
useful with --hide-missing to hide/unhide files after their content
has been dropped or received.
Still needs integration with sync and the assistant, and not as fast as it
could be, but already usable.
This commit was sponsored by Ethan Aubin.
Combinations like --hide-misssing --unlocked seem very useful. On the
other hand, combining --fix with --unlock doesn't make sense because a
file can be either unlocked or a symlink that can be fixed, but not
both.
Changed the serialization of HideMissingAdjustment in passing, but it
has not actually been used yet so nothing will be broken.
This commit was sponsored by Trenton Cronholm on Patreon.
This was badly named, it's a not a blob necessarily, but anything that a
tree can refer to.
Also removed the Show instance which was used for serialization to git
format, instead use fmtTreeItemType.
This commit was supported by the NSF-funded DataLad project.
Fourth or fifth try at this and finally found a way to make it work.
Absurd amount of busy-work forced on me by change in cabal's behavior.
Split up Utility modules that need posix stuff out of ones used by
Setup. Various other hacks around inability for Setup to use anything
that ifdefs a use of unix.
Probably lost a full day of my life to this.
This is how build systems make their users hate them. Just saying.
Needs ghc 7.6.1, so minimum base version increased slightly. All builds
are well above this version of ghc, and debian oldstable is as well.
Code that could use lambdacase can be found by running:
git grep -B 1 'case ' | less
and searching in less for "<-"
This commit was sponsored by andrea rota.
Also deletes any tagged pushes that the assistant might have done,
since those would also prevent resetting a branch back.
This commit was sponsored by andrea rota.
* Added annex.resolvemerge configuration, which can be set to false to
disable the usual automatic merge conflict resolution done by git-annex
sync and the assistant.
* sync: Added --no-resolvemerge option.
Note that disabling merge conflict resolution is probably not a good idea
in a direct mode repo or adjusted branch. Since updates to both are done
outside the usual work tree, if it fails the tree is not left in a
conflicted state, and it would be hard to manually resolve the conflict.
Still, made annex.resolvemerge be supported in those cases for consistency.
This commit was sponsored by Riku Voipio.
Might want to remove this when it gets fixed, in case adjusted branches are
used in a repo with a great many refs, which would become unnecessarily
slow.
This commit was supported by the NSF-funded DataLad project.
ghc 8 added backtraces on uncaught errors. This is great, but git-annex was
using error in many places for a error message targeted at the user, in
some known problem case. A backtrace only confuses such a message, so omit it.
Notably, commands like git annex drop that failed due to eg, numcopies,
used to use error, so had a backtrace.
This commit was sponsored by Ethan Aubin.
* sync: Previously, when run in a branch with a slash in its name,
such as "foo/bar", the sync branch was "synced/bar". That conflicted
with the sync branch used for branch "bar", so has been changed to
"synced/foo/bar".
* adjust: Previously, when adjusting a branch with a slash in its name,
such as "foo/bar", the adjusted branch was "adjusted/bar(unlocked)".
That conflicted with the adjusted branch used for branch "bar",
so has been changed to "adjusted/foo/bar(unlocked)"
* Also, running sync in an adjusted branch did not correctly sync
changes back to the parent branch when it had a slash in its name.
This bug has been fixed.
Eliminate use of Git.Ref.under and Git.Ref.basename; using
Git.Ref.underBase and Git.Ref.base make everything handle deep branches
correctly.
Probably noone was adjusting deep branches, and v6 is still experimental
anyway, so I'm not going to worry about the mess that was left by that bug.
In the case of git-annex sync, using a fixed git-annex with an old unfixed
one will mean they use different sync branches for a deep branch, and so
they may stop syncing until the old one is upgraded. However, that's only
a problem when syncing between repositories without going via a central
bare repository. Added a warning about this to the CHANGELOG, but it's
probably not going to affect many people at all.
This commit was sponsored by Riku Voipio.
This bug caused broken tree objects to get built by a later git annex sync.
This is a somewhat unlikely but not impossible situation, and the test
suite's union_merge_regression test tickled it when it was run on FAT.
Could not think of a foolproof way to detect if the old adjusted branch was
just behind the current branch. It's possible that the user amended the
adjusting commit at the head of the adjusted branch, for example.
I decided to bail in this situation, instead of just entering the old
branch, so that if git annex adjust succeeds the user is always in a
*current* adjusted branch, not some old and out of date one.
What could perhaps be done is enter the old branch and then update it. But
that seems too magical; the user may have rebased master or something or
may not want to propigate the changes from the old branch. Best to error
out.
git 2.8.1 (or perhaps 2.9.0) is going to prevent git merge from merging in
unrelated branches. Since the webapp's pairing etc features often combine
together repositories with unrelated histories, work around this behavior
change by setting GIT_MERGE_ALLOW_UNRELATED_HISTORIES when the assistant
merges.
Note though that this is not done for git annex sync's merges, so
it will follow git's default or configured behavior.
When git-annex is used with a git version older than 2.2.0, disable support for
adjusted branches, since GIT_COMMON_DIR is needed to update them and was first
added in that version of git.
This is how direct mode does it too, and somehow, for reasons that
currently escape me, this makes git merge not care if it's run with an
empty work tree.
This makes the direct mode to v6 upgrade able to be performed in one clone
of a repository without affecting other clones, which can continue using v5
and direct mode.
