This does not change the overall license of the git-annex program, which
was already AGPL due to a number of sources files being AGPL already.
Legally speaking, I'm adding a new license under which these files are
now available; I already released their current contents under the GPL
license. Now they're dual licensed GPL and AGPL. However, I intend
for all my future changes to these files to only be released under the
AGPL license, and I won't be tracking the dual licensing status, so I'm
simply changing the license statement to say it's AGPL.
(In some cases, others wrote parts of the code of a file and released it
under the GPL; but in all cases I have contributed a significant portion
of the code in each file and it's that code that is getting the AGPL
license; the GPL license of other contributors allows combining with
AGPL code.)
When public access is used for the remote, it complained that the user
needed to set creds to use it, which was just wrong.
When creds were being used, it fell back from trying to use the version ID
to just accessing the key in the bucket, which was ok for non-export
remotes, but wrong for buckets.
In both cases, display a hopefully useful warning.
This should only come up when an existing S3 remote has been exported
to, and then later versioning was enabled.
Note that it would perhaps be possible to fall back from trying to use
retrieveKeyFile when it fails and instead use retrieveKeyFileFromExport,
which may work when S3 version ID is missing. But there are problems
with that approach; how to tell when retrieveKeyFile has failed due to this
rather than a network problem etc? Anyway, that approach would only work
until the file in the export got overwritten, and then it would no
longer be accessible. And with versioning enabled, the user wants old
versions of objects to remain accessible, so it seems better to warn
about the problem as soon as possible, so they can go back and add S3
version IDs.
This work is supported by the NIH-funded NICEMAN (ReproNim TR&D3) project.
Note that it does not prevent storing p2p access tokens or multicast
encryption keys, since those are not cached; the previous commit
established the distinction.
How well this works depends on how often getRemoteCredPair is called and
how expensive it is. In some cases setting this will result in an annoying
number of gpg password prompts and/or slowdowns due to reading creds
from the git-annex branch and decrypting, which could be improved by calling
getRemoteCredPair less often.
This commit was sponsored by Ilya Shlyakhter on Patreon.
p2p and multicast creds are not cached the same way that s3 and webdav
creds are. The difference is that p2p and multicast obtain the creds
themselves, as part of a process like pairing. So they're storing the
only extant copy of the creds. In s3 and webdav etc the creds are
provided by the cloud storage provider.
This is a fine difference, but I do think it's a reasonable difference.
If the user wants to prevent s3 and webdav etc creds from being stored
unencrypted on disk, they won't feel the same about p2p auth tokens
used for tor, or a multicast encryption key, or for that matter their
local ssh private key.
This commit was sponsored by Fernando Jimenez on Patreon.
ghc 8 added backtraces on uncaught errors. This is great, but git-annex was
using error in many places for a error message targeted at the user, in
some known problem case. A backtrace only confuses such a message, so omit it.
Notably, commands like git annex drop that failed due to eg, numcopies,
used to use error, so had a backtrace.
This commit was sponsored by Ethan Aubin.
Removed the instance LensGpgEncParams RemoteConfig because it encouraged
code that does not take the RemoteGitConfig into account.
RemoteType's setup was changed to take a RemoteGitConfig,
although the only place that is able to provide a non-empty one is
enableremote, when it's changing an existing remote. This led to several
folow-on changes, and got RemoteGitConfig plumbed through.
The naming is unofrtunately not consistent, but the gnupg-options
were only used for encrypting, and it's too late to change that.
It would be nice to have a third setting that is always passed to gnupg,
but ~/.gnupg/options can be used to specify such global options when really
needed.
When gpg.program is configured, it's used to get the command to run for
gpg. Useful on systems that have only a gpg2 command or want to use it
instead of the gpg command.
This is intended to let the user easily tell if a remote's creds are
coming from info embedded in the repository, or instead from the
environment, or perhaps are locally stored in a creds file.
This commit was sponsored by Frédéric Schütz.
A one-time warning was not good enough. A hard error will force the user to
notice the problem.
Perhaps worth noting that git-annex enableremote already failed with an
error, and nobody reported a bug. Suggests that not many people have used
the insecure configuration, or if they did, they went to the bother to
embedcreds, but never re-enabled the special remote.
See 2f3c3aa01f for backstory about how a repo
could be in this state.
When decryption fails, the repo must be using non-encrypted creds. Note
that creds are encrypted/decrypted using the encryption cipher which is
stored in the repo, so the decryption cannot fail due to missing gpg keys
etc. (For !shared encryptiom, the cipher is iteself encrypted using some
gpg key(s), and the decryption of the cipher happens earlier, so not
affected by this change.
Print a warning message for !shared repos, and continue on using the
cipher. Wrote a page explaining what users hit by this bug should do.
This commit was sponsored by Samuel Tardieu.
encryptionSetup must be called before setRemoteCredPair. Otherwise,
the RemoteConfig doesn't have the cipher in it, and so no cipher is used to
encrypt the embedded creds.
This is a security fix for non-shared encryption methods!
For encryption=shared, there's no security problem, just an
inconsistentency in whether the embedded creds are encrypted.
This is very important to get right, so used some types to help ensure that
setRemoteCredPair is only run after encryptionSetup. Note that the external
special remote bypasses the type safety, since creds can be set after the
initial remote config, if the external special remote program requests it.
Also note that IA remotes never use encryption, so encryptionSetup is not
run for them at all, and again the type safety is bypassed.
This leaves two open questions:
1. What to do about S3 and glacier remotes that were set up
using encryption=pubkey/hybrid with embedcreds?
Such a git repo has a security hole embedded in it, and this needs to be
communicated to the user. Is the changelog enough?
2. enableremote won't work in such a repo, because git-annex will
try to decrypt the embedded creds, which are not encrypted, so fails.
This needs to be dealt with, especially for ecryption=shared repos,
which are not really broken, just inconsistently configured.
Noticing that problem for encryption=shared is what led to commit
fbdeeeed5f, which tried to
fix the problem by not decrypting the embedded creds.
This commit was sponsored by Josh Taylor.
This reverts commit fbdeeeed5f.
I can find no basis for that commit and think that I made it in error.
setRemoteCredPair always encrypts using the cipher from remoteCipher,
even when the cipher is shared.
Since encryption=shared, the encryption key is stored in the git repo, so
there is no point at all in encrypting the creds, also stored in the git
repo with that key. So `initremote` doesn't. The creds are simply stored
base-64 encoded.
However, it then tried to always decrypt creds when encryption was used..
With the initremote parameters "encryption=pubkey keyid=788A3F4C".
/!\ Adding or removing a key has NO effect on files that have already
been copied to the remote. Hence using keyid+= and keyid-= with such
remotes should be used with care, and make little sense unless the point
is to replace a (sub-)key by another. /!\
Also, a test case has been added to ensure that the cipher and file
contents are encrypted as specified by the chosen encryption scheme.
That's needed in files used to build the configure program.
For the other files, I'm keeping my __WINDOWS__ define, as I find that much easier to type.
I may search and replace it to use the mingw32_HOST_OS thing later.
Both the directory and webdav special remotes used to have to buffer
the whole file contents before it could be decrypted, as they read
from chunks. Now the chunks are streamed through gpg with no buffering.
