But, it's buggy: the server hangs without processing the VALIDITY,
and I can't seem to work out why. As far as I can see, storefile
is getting as far as running the validitycheck, which is supposed to
read that, but never does.
This is especially strange because what seems like the same protocol
doesn't hang when servePut runs it. This made me think that it needed
to use inAnnexWorker to be more like servePut, but that didn't help.
Another small problem with this is that it does create an empty
.git/annex/tmp/ file for the key. Since this will usually be used in
combination with servePut, that doesn't seem worth worrying about much.
This means that when the client sends a truncated data to indicate
invalidity, DATA is not passed the full expected data. That leaves the
P2P connection in a state where it cannot be reused. While so far, they
are not reused, they will be later when proxies are supported. So, have
to close the P2P connection in this situation.
Always truncate instead. The padding risked something not noticing the
content was bad and getting a file that was corrupted in a novel way
with the padding "X" at the end. A truncated file is better.
Made the data-length header required even for v0. This simplifies the
implementation, and doesn't preclude extra verification being done for
v0.
The connectionWaitVar is an ugly hack. In servePut, nothing waits
on the waitvar, and I could not find a good way to make anything wait on
it.
This came down to SendBytes waiting on the waitv. Nothing ever filled
it.
Only Annex.Proxy needs the waitv, and it handles filling it. So make it
optional.
Added v2-v0 endpoints. These are tedious, but will be needed in order to
use the HTTP protocol to proxy to repositories with older git-annex,
where git-annex-shell will be speaking an older version of the protocol.
Changed GET to use 422 when the content is not present. 404 is needed to
detect when a protocol version is not supported.
For clusters, the timestamps have to be translated, since each node can
have its own idea about what time it is. To translate a timestamp, the
proxy remembers what time it asked the node for a timestamp in
GETTIMESTAMP, and applies the delta as an offset in REMOVE-BEFORE.
This does mean that a remove from a cluster has to call GETTIMESTAMP on
every node before dropping from nodes. Not very efficient. Although
currently it tries to drop from every single node anyway, which is also
not very efficient.
I thought about caching the GETTIMESTAMP from the nodes on the first
call. That would improve efficiency. But, since monotonic clocks on
!Linux don't advance when the computer is suspended, consider what might
happen if one node was suspended for a while, then came back. Its
monotonic timestamp would end up behind where the proxying expects it to
be. Would that result in removing when it shouldn't, or refusing to
remove when it should? Have not thought it through. Either way, a
cluster behaving strangly for an extended period of time because one
of its nodes was briefly asleep doesn't seem like good behavior.
Added Maybe POSIXTime to SafeDropProof, which gets set when the proof is
based on a LockedCopy. If there are several LockedCopies, it uses the
closest expiry time. That is not optimal, it may be that the proof
expires based on one LockedCopy but another one has not expired. But
that seems unlikely to really happen, and anyway the user can just
re-run a drop if it fails due to expiry.
Pass the SafeDropProof to removeKey, which is responsible for checking
it for expiry in situations where that could be a problem. Which really
only means in Remote.Git.
Made Remote.Git check expiry when dropping from a local remote.
Checking expiry when dropping from a P2P remote is not yet implemented.
P2P.Protocol.remove has SafeDropProof plumbed through to it for that
purpose.
Fixing the remaining 2 build warnings should complete this work.
Note that the use of a POSIXTime here means that if the clock gets set
forward while git-annex is in the middle of a drop, it may say that
dropping took too long. That seems ok. Less ok is that if the clock gets
turned back a sufficient amount (eg 5 minutes), proof expiry won't be
noticed. It might be better to use the Monotonic clock, but that doesn't
advance when a laptop is suspended, and while there is the linux
Boottime clock, that is not available on other systems. Perhaps a
combination of POSIXTime and the Monotonic clock could detect laptop
suspension and also detect clock being turned back?
There is a potential future flag day where
p2pDefaultLockContentRetentionDuration is not assumed, but is probed
using the P2P protocol, and peers that don't support it can no longer
produce a LockedCopy. Until that happens, when git-annex is
communicating with older peers there is a risk of data loss when
a ssh connection closes during LOCKCONTENT.
The error message is not displayed to the use, but this mirrors the
behavior when a regular get from a special remote fails. At least now
there is not a protocol error.
Now that storeKey can have a different object file passed to it, this
complication is not needed. This avoids a lot of strange situations,
and will also be needed if streaming is eventually supported.
Still needs some work.
The reason that the waitv is necessary is because without it,
runNet loops back around and reads the next protocol message. But it's
not finished reading the whole bytestring yet, and so it reads some part
of it.
Working, but lots of room for improvement...
Without streaming, so there is a delay before download begins as the
file is retreived from the special remote.
And when resuming it retrieves the whole file from the special remote
*again*.
Also, if the special remote throws an exception, currently it
shows as "protocol error".
This makes eg git-annex get default to using the cluster rather than an
arbitrary node, which is better UI.
The actual cost of accessing a proxied node vs using the cluster is
basically the same. But using the cluster allows smarter load-balancing
to be done on the cluster.
Before it was using a node that might have had a higher cost.
Also threw in a random selection from amoung the low cost nodes. Of
course this is a poor excuse for load balancing, but it's better than
nothing. Most of the time...
The VIA extension is still needed to avoid some extra work and ugly
messages, but this is enough that it actually works.
This filters out the RemoteSides that are a proxied connection via a
remote gateway to the cluster.
The VIA extension will not filter those out, but will send VIA to them
on connect, which will cause the ones that are accessed via the listed
gateways to be filtered out.
Walking a tightrope between security and convenience here, because
git-annex-shell needs to only proxy for things when there has been
an explicit, local action to configure them.
In this case, the user has to have run `git-annex extendcluster`,
which now sets annex-cluster-gateway on the remote.
Note that any repositories that the gateway is recorded to
proxy for will be proxied onward. This is not limited to cluster nodes,
because checking the node log would not add any security; someone could
add any uuid to it. The gateway of course then does its own
checking to determine if it will allow proxying for the remote.
Rejected the idea of automatically instantiating remotes for proxies-of-proxies.
That needs cycle protection, while the current behavior, which happened
for free, is that running git-annex updateproxy on the proxy can be used
to configure it, but only for topologies that actually exist.
The problem with that idea is that the cluster's proxy is necessarily a
remote, and necessarily one that we'll want to sync with, since the git
repository is stored there. So when its preferred content wants a file,
and the cluster does too, the file will get uploaded to it as well as to
the cluster. With fanout, the upload to the cluster will populate the
proxy as well, avoiding a second upload. But only if the file is sent to
the cluster first. If it's sent to the proxy first, there will be two
uploads.
Another, lesser problem is that a repository can proxy for more than one
cluster. So when does it make sense to drop content from the repository?
It could be done when dropping from one cluster, but what of the other
one?
This complication was not necessary anyway. Instead, if it's desirable
to have some content accessed from close to the proxy, one of the
cluster nodes can just be put on the same filesystem as it. That will be
just as fast as storing the content on the proxy.
Except when no nodes want a file, it has to be stored somewhere, so
store it on all. Which is not really desirable, but neither is having to
pick one.
ProtoAssociatedFile deserialization is rather broken, and this could
possibly affect preferred content expressions that match on filenames.
The inability to roundtrip whitespace like tabs and newlines through is
not a problem because preferred content expressions can't be written
that match on whitespace such as a tab. For example:
joey@darkstar:~/tmp/bench/z>git-annex wanted origin-node2 'exclude=*CTRL-VTab*'
wanted origin-node2
git-annex: Parse error: Parse failure: near "*"
But, the filtering of control characters could perhaps be a problem. I think
that filtering is now obsolete, git-annex has comprehensive filtering of
control characters when displaying filenames, that happens at a higher level.
However, I don't want to risk a security hole so am leaving in that filtering
in ProtoAssociatedFile deserialization for now.
Avoid `git-annex sync --content` etc from operating on cluster nodes by default
since syncing with a cluster implicitly syncs with its nodes. This avoids a
lot of unncessary work when a cluster has a lot of nodes just in checking
if each node's preferred content is satisfied. And it avoids content
being sent to nodes individually, so instead syncing with clusters always
fanout uploads to nodes.
The downside is that there are situations where a cluster's preferred content
settings can be met, but those of its nodes are not. Or where a node does not
contain a key, but the cluster does, and there are not enough copies of the key
yet, so it would be desirable the send it there. I think that's an acceptable
tradeoff. These kind of situations are ones where the cluster itself should
probably be responsible for copying content to the node. Which it can do much
less expensively than a client can. Part of the balanced preferred content
design that I will be working on in a couple of months involves rebalancing
clusters, so I expect to revisit this.
The use of annex-sync config does allow running git-annex sync with a specific
node, or nodes, and it will sync with it. And it's also possible to set
annex-sync git configs to make it sync with a node by default. (Although that
will require setting up an explicit git remote for the node rather than relying
on the proxied remote.)
Logs.Cluster.Basic is needed because Remote.Git cannot import Logs.Cluster
due to a cycle. And the Annex.Startup load of clusters happens
too late for Remote.Git to use that. This does mean one redundant load
of the cluster log, though only when there is a proxy.
This makes git-annex sync and similar not treat proxied remotes as git
syncable remotes.
Also, display in git-annex info remote when the remote is proxied.
Loading the remote list a second time was removing all proxied remotes.
That happened because setting up the proxied remote added some config
fields to the in-memory git config, and on the second load, it saw those
configs and decided not to overwrite them with the proxy.
Now on the second load, that still happens. But now, the proxied
git configs are used to generate a remote same as if those configs were
all set. The reason that didn't happen before was twofold,
the gitremotes cache was not dropped, and the remote's url field was not
set correctly.
The problem with the remote's url field is that while it was marked as
proxy inherited, all other proxy inherited fields are annex- configs.
And the code to inherit didn't work for the url field.
Now it all works, but git-annex sync is left running git push/pull on
the proxied remote, which doesn't work. That still needs to be fixed.
Tested it with small chunk sizes (like 2) and resumes that were
eg 1 byte from the end of the file or beginning of file.
Also, git-annex testremote passes now against a cluster!
When the destination does not start with a copy, the cluster has one or
more copies. If more, dropping would reduce the number of copies, so
numcopies must be checked.
Considered checking how many nodes of the cluster contain a copy. If
only 1 node does, it could allow a move without checking numcopies.
The problem with that, though, is that other nodes of the cluster could
have copies that we don't know about. And dropping from a cluster tries
to drop from all nodes, so will drop even from those. So any drop from a
cluster can remove more than 1 copy.
Dropping from a cluster drops from every node of the cluster.
Including nodes that the cluster does not think have the content.
This is different from GET and CHECKPRESENT, which do trust the
cluster's location log. The difference is that removing from a cluster
should make 100% the content is gone from every node. So doing extra
work is ok. Compare with CHECKPRESENT where checking every node could
make it very expensive, and the worst that can happen in a false
negative is extra work being done.
Extended the P2P protocol with FAILURE-PLUS to handle the case where a
drop from one node succeeds, but a drop from another node fails. In that
case the entire cluster drop has failed.
Note that SUCCESS-PLUS is returned when dropping from a proxied remote
that is not a cluster, when the protocol version supports it. This is
because P2P.Proxy does not know when it's proxying for a single node
cluster vs for a remote that is not a cluster.
This is obviously necessary in order for dropping from a cluster to be able to
drop from all nodes.
It also avoids violating numcopies when a cluster node is a special remote.
If it were used in the drop proof, nothing would prevent the cluster from
dropping from it.
Client side support for SUCCESS-PLUS and ALREADY-HAVE-PLUS
is complete, when a PUT stores to additional repositories
than the expected on, the location log is updated with the
additional UUIDs that contain the content.
Started implementing PUT fanout to multiple remotes for clusters.
It is untested, and I fear fencepost errors in the relative
offset calculations. And it is missing proxying for the protocol
after DATA.
This assumes that the proxy for a cluster has up-to-date location
logs. If it didn't, it might proxy the checkpresent to a node that no
longer has the content, while some other node still does, and so
it would incorrectly appear that the cluster no longer contains the
content.
Since cluster UUIDs are not stored to location logs,
git-annex fsck --fast when claiming to fix a location log when
that occurred would not cause any problems. And presumably the location
tracking would later get sorted out.
At least usually, changes to the content of nodes goes via the proxy,
and it will update its location logs, so they will be accurate. However,
if there were multiple proxies to the same cluster, or nodes were
accessed directly (or via proxy to the node and not the cluster),
the proxy's location log could certainly be wrong.
(The location log access for GET has the same issues.)
Handled limitCopies, as well as everything using fromNumCopies and
fromMinCopies.
This should be everything, probably.
Note that, git-annex info displays a count of repositories, which still
includes cluster. I think that's ok. It would be possible to filter out
clusters there, but to the user they're pretty much just another
repository. The numcopies displayed by eg `git-annex info .` does not
include clusters.
This is to avoid inserting a cluster uuid into the location log when
only dead nodes in the cluster contain the content of a key.
One reason why this is necessary is Remote.keyLocations, which excludes
dead repositories from the list. But there are probably many more.
Implementing this was challenging, because Logs.Location importing
Logs.Cluster which imports Logs.Trust which imports Remote.List resulted
in an import cycle through several other modules.
Resorted to making Logs.Location not import Logs.Cluster, and instead
it assumes that Annex.clusters gets populated when necessary before it's
called.
That's done in Annex.Startup, which is run by the git-annex command
(but not other commands) at early startup in initialized repos. Or,
is run after initialization.
Note that is Remote.Git, it is unable to import Annex.Startup, because
Remote.Git importing Logs.Cluster leads the the same import cycle.
So ensureInitialized is not passed annexStartup in there.
Other commands, like git-annex-shell currently don't run annexStartup
either.
So there are cases where Logs.Location will not see clusters. So it won't add
any cluster UUIDs when loading the log. That's ok, the only reason to do
that is to make display of where objects are located include clusters,
and to make commands like git-annex get --from treat keys as being located
in a cluster. git-annex-shell certainly does not do anything like that,
and I'm pretty sure Remote.Git (and callers to Remote.Git.onLocalRepo)
don't either.
