The new ansi-terminal was needed for test concurrency, and the new
concurrent-output fixes several bugs. And it turns out this is all
that's needed to use the new tasty.
Sponsored-by: Kevin Mueller on Patreon
Dependency issues were looking difficult to support tasty-1.2 with that
build. Not using `after` only affects rerunning and limiting tests,
since tasty's concurrency is not used, so this build will just not
support that.
We are probably nearing end of life on this build; it also doesn't
support git-lfs or http-client-restricted. The 2.6.32 kernel it supports
is at this point 13 years old, and stopped being supported by linux LTS
developers 10 years ago. It was supported by RHEL 6.10 through November
2020. At this point, no new hardware should be shipping with this
kernel, but that probably does not stop certian embedded vendors from
shipping it. And there is certainly some hardware still using it. But
the returns from supporting it are diminishing, and the quality of the
build for it is also diminishing.
Sponsored-by: Nicholas Golder-Manning on Patreon
Using concurrent-output this is easy. Just have to check if tasty has
color enabled, and propagate it into the worker processes, some of which
will be run without a controlling console.
Also added a call to installSignalHandlers; I noticed that interrupting
the test suite could leave the console in a bad state and this fixes
that.
The ansi-terminal dependency is free, since tasty also depends on it.
Sponsored-by: Dartmouth College's Datalad project
The upgrade from V9 uses this to avoid an automatic upgrade until 1 year
after the V9 update. It can also be used in future such situations.
Sponsored-by: Dartmouth College's Datalad project
v10 will run 1 year after the upgrade to v9, to give time for any v8
processes to die. Until that point, the v10 upgrade will be tried by
every process but deferred, so added support for deferring upgrades.
The upgrade prevention lock file that will be used by v10 is not yet
implemented, so it does not yet defer.
Sponsored-by: Dartmouth College's Datalad project
This is the start of v9, but it's currently identical to v8, and v8 is
not upgraded to it. git-annex upgrade will upgrade to v9 with this
change.
Sponsored-by: Dartmouth College's Datalad project
Capstone to this feature. Any transitions that have been performed on an
unmerged remote ref but not on the local git-annex branch, or vice-versa
have to be applied on the fly when reading files.
Sponsored-by: Dartmouth College's Datalad project
git-lfs: Fix interoperability with gitlab's implementation of the git-lfs
protocol, which requests Content-Encoding chunked.
Sponsored-by: Dartmouth College's Datalad project
filter-process: New command that can make git add/checkout faster when
there are a lot of unlocked annexed files or non-annexed files, but that
also makes git add of large annexed files slower.
Use it by running: git
config filter.annex.process 'git-annex filter-process'
Fully tested and working, but I have not benchmarked it at all.
And, incremental hashing is not done when git add uses it, so extra work is
done in that case.
Sponsored-by: Mark Reidenbach on Patreon
* Removed support for accessing git remotes that use versions of
git-annex older than 6.20180312.
* git-annex-shell: Removed several commands that were only needed to
support git-annex versions older than 6.20180312.
(lockcontent, recvkey, sendkey, transferinfo, commit)
The P2P protocol was added in that version, and used ever since, so
this code was only needed for interop with older versions.
"git-annex-shell commit" is used by newer git-annex versions, though
unnecessarily so, because the p2pstdio command makes a single commit at
shutdown. Luckily, it was run with stderr and stdout sent to /dev/null,
and non-zero exit status or other exceptions are caught and ignored. So,
that was able to be removed from git-annex-shell too.
git-annex-shell inannex, recvkey, sendkey, and dropkey are still used by
gcrypt special remotes accessed over ssh, so those had to be kept.
It would probably be possible to convert that to using the P2P protocol,
but it would be another multi-year transition.
Some git-annex-shell fields were able to be removed. I hoped to remove
all of them, and the very concept of them, but unfortunately autoinit
is used by git-annex sync, and gcrypt uses remoteuuid.
The main win here is really in Remote.Git, removing piles of hairy fallback
code.
Sponsored-by: Luke Shumaker
This is a result of an audit of every use of getInodeCaches,
to find places that misbehave when the annex object is not in the inode
cache, despite pointer files for the same key being in the inode cache.
Unfortunately, that is the case for objects that were in v7 repos that
upgraded to v8. Added a note about this gotcha to getInodeCaches.
Database.Keys.reconcileStaged, then annex.thin is set, would fail to
populate pointer files in this situation. Changed it to check if the
annex object is unmodified the same way inAnnex does, falling back to a
checksum if the inode cache is not recorded.
Sponsored-by: Dartmouth College's Datalad project
Most of the changes here involve global option parsing: GlobalSetter
changed so it can both run an Annex action to set state, but can also
change the AnnexRead value, which is immutable once the Annex monad is
running.
That allowed a debugselector value to be added to AnnexRead, seeded
from the git config. The --debugfilter option's GlobalSetter then updates
the AnnexRead.
This improved GlobalSetter can later be used to move more stuff to
AnnexRead. Things that don't involve a git config will be easier to
move, and probably a *lot* of things can be moved eventually.
fastDebug, while implemented, is not used anywhere yet. But it should be
fast..
This uses a DebugSelector, rather than debug levels, which will allow
for a later option like --debug-from=Process to only
see debuging about running processes.
The module name that contains the thing being debugged is used as the
DebugSelector (in most cases; does not need to be a hard and fast rule).
Debug calls were changed to add that. hslogger did not display
that first parameter to debugM, but the DebugSelector does get
displayed.
Also fastDebug will allow doing debugging in places that are used in
tight loops, with the DebugSelector coming from the Annex Reader
essentially for free. Not done yet.
persistent stopped using askLogFunc, and the thing to use is askLoggerIO
from monad-logger. Bumped the dep to the first version that contained that.
Note that the i386ancient build uses a newer monad-logger than 0.3.10,
so the new versioned dep should not break it, and presumably nothing else
either.
This commit was sponsored by Noam Kremen on Patreon.
Added LinkType to ProvidedInfo, and unified MatchingKey with
ProvidedInfo. They're both used in the same way, so there was no real
reason to keep separate.
Note that addLocked and addUnlocked still set matchNeedsFileName,
because to handle MatchingFile, they do need it. However, they
don't use it when MatchingInfo is provided. This should be ok,
the --branch case will be able skip checking matchNeedsFileName,
since it will provide a filename in any case.
Implemented by generalizing registerurl. Without the implicit batch mode
of registerurl since that is only a backwards compatability thing
(see commit 1d1054faa6).
Checksum as content is received from a remote git-annex repository, rather
than doing it in a second pass.
Not tested at all yet, but I imagine it will work!
Not implemented for any special remotes, and also not implemented for
copies from local remotes. It may be that, for local remotes, it will
suffice to use rsync, rely on its checksumming, and simply return Verified.
(It would still make a checksumming pass when cp is used for COW, I guess.)
annex.stalldetection can now be set to "true" to make git-annex do
automatic stall detection when it detects a remote is updating its transfer
progress consistently enough.
This commit was sponsored by Luke Shumaker on Patreon.
I suspect this is a bug in cabal sdist, because with
Includes: Utility/libkqueue.h
the file is not included, but putting it in extra-files does
get it into the tarball.
This is conceptually very simple, just making a 1 that was hard coded be
exposed as a config option. The hard part was plumbing all that, and
dealing with complexities like reading it from git attributes at the
same time that numcopies is read.
Behavior change: When numcopies is set to 0, git-annex used to drop
content without requiring any copies. Now to get that (highly unsafe)
behavior, mincopies also needs to be set to 0. It seemed better to
remove that edge case, than complicate mincopies by ignoring it when
numcopies is 0.
This commit was sponsored by Denis Dzyubenko on Patreon.
Especially from borg, where the content identifier logs
all end up being the same identical file!
But also, for other imports, the location tracking logs can,
in some cases, be identical files.
Bonus optimisation: Avoid looking up (and parsing when set)
GIT_ANNEX_VECTOR_CLOCK env var every time a log is written to.
Although the lookup does happen at startup even when no
log will be written now.
Still some issues to deal with, see TODO and XXX.
Here's what gets logged, for each key:
cid log:
1608582045.832799227s 6720ebad-b20e-4460-a8f2-2477361aea75 !MjAyMC0xMi0yMVQxMTozMzoxNw==:!MjAyMC0xMi0yMVQxMzowNzoyNg==
The "!Mj" are base64 encoded borg archive names, since mine were
dates and contained some characters not allowed in cid logs unescaped.
There were archives that each contained the key. This list will grow as
more borg backups are done and learned about.
tree generated:
120000 blob 5ef6a4615c084819b44cd4e3a31657664ddf643b x/dotgit/annex/objects/06/mv/SHA256E-s30--a5d8532e64ec28f5491e25e7a6c1cb68f80507c1be6c1b35f8ec53d25413e5da/SHA256E-s30--a5d8532e64ec28f5491e25e7a6c1cb68f80507c1be6c1b35f8ec53d25413e5da
120000 blob 063a139d3021c8db60f5c576d29fada2b824d91c x/dotgit/annex/objects/72/PP/SHA256E-s30--e80b09a854b4e4d99a76caaa6983b34272480e0b4fdb95d04234a54b4849b893/SHA256E-s30--e80b09a854b4e4d99a76caaa6983b34272480e0b4fdb95d04234a54b4849b893
120000 blob b53b54916fd6abf21fedf796deca08d5ac7a75af x/dotgit/annex/objects/Ww/pk/SHA256E-s30--6aac072a8ebf02a5807c4f15e77ed585a6c87b3b333ba625a3c8d6b4dc50a9f2/SHA256E-s30--6aac072a8ebf02a5807c4f15e77ed585a6c87b3b333ba625a3c8d6b4dc50a9f2
This commit was sponsored by Denis Dzyubenko on Patreon.
This is to avoid breakage when upgrading or downgrading git-annex with a
process running that uses the interface. It's better to keep the
compatability code for a few years than worry about such breakage.
This commit was sponsored by Brett Eisenberg on Patreon.
New config annex.stalldetection, remote.name.annex-stalldetection, which
can be used to deal with remotes that stall during transfers, or are
sometimes too slow to want to use.
This commit was sponsored by Luke Shumaker on Patreon.
This old code will now be useful for git-annex beyond the assistant.
git-annex won't use the CheckTransferrer part, and won't run transferkeys
as a batch process, and will want withTransferrer to not shut down
transferkeys processes. Still, the rest of this is a good fit for what I
need now.
Also removed some dead code, and simplified a little bit.
This commit was sponsored by Mark Reidenbach on Patreon.
Any given transfer can only display 1 progress meter at a time, or so
this code assumes. In some cases, there are progress meters for
different stages of a transfer, perhaps, and that is supported by this.
This commit was sponsored by Ethan Aubin.
Added annex.adjustedbranchrefresh git config to update adjusted branches
set up by git-annex adjust --unlock-present/--hide-missing.
Note, in a few cases, I was not able to make the adjusted branch
be updated in calls to moveAnnex, because information about what
file corresponds to a key is not available. They are:
* If two files point to one file, then eg, `git annex get foo` will
update the branch to unlock foo, but will not unlock bar, because it
does not know about it. Might be fixable by making `git annex get
bar` do something besides skipping bar?
* git-annex-shell recvkey likewise (so sends over ssh from old versions
of git-annex)
* git-annex setkey
* git-annex transferkey if the user does not use --file
* git-annex multicast sends keys with no associated file info
Doing a single full refresh at the end, after any incremental refresh,
will deal with those edge cases.
This will let a module that Annex.Content imports use inAnnex.
Unsure yet if I will need that, but this split still seems to make
sense, and Annex.Content was way too long so splitting it is good.
All properties changed to use them, except for
prop_encode_c_decode_c_roundtrip, which already filtered to ascii
for other reasons.
A few modules had to be split out, because Setup does not build-depend
on QuickCheck.
Had to split out some modules because getWorkingDirectory needs unix,
which is not a build-dep of configure.
This commit was sponsored by Brock Spratlen on Patreon.
John Thorvald Wodder II got it working using
https://github.com/datalad/file-windows so don't hard-disable it.
The stack.yaml still disables this build flag, because it needs an extra
C library to be installed, which stack cannot automate.
When I put in Haskell98 this spring, I was under the mistaken
apprehension that ghc defaulted to that. But it actually its default
is a third mode, which is closer to Haskell2010 but with some differences.
The manual says "By default, GHC mainly aims to behave (mostly) like a
Haskell 2010 compiler"
Fixed two cases where the Haskell98 do indentation flexability let
wrongly indented code build. That is one of the places where
ghc does not behave like Haskell2010 by default.
The other place that I think I was concerned about, is GHC manual
section 19.1.1.3. Expressions and patterns. But that only seems to
affect code using bottoms, so would only affect pure functions throwing
an error, which I don't think git-annex does in many places as it's
pretty horrid style. And it would only affect rare cases like shown in
that section. If it did happen, it would mean that the error was not
thrown before specifying Haskell98, and then was. Haskell2010 behaves
the same as Haskell98.
This commit was sponsored by Denis Dzyubenko on Patreon.
Only turning it off when the criterion library is not installed.
Not enabled for osx or i386ancient yet since that will need some
invesitgation to update their respective stack.yaml files.
So these special remotes are always supported.
IIRC these build flags were added because the dep chains were a bit too
long, or perhaps because the libraries were not available in Debian stable,
or something like that. That was long ago, those reasons no longer apply,
and users get confused when builtin special remotes are not available, so
it seems best to remove the build flags now.
If this does cause a problem it can be reverted of course..
This commit was sponsored by Jochen Bartl on Patreon.
"http" was too generic and easy to confuse with web. The new name makes
clear it's used in addition to some other remote. And other protocols
can use the same naming scheme.
This adds a dep on hashable, but it's a free dependency, since
unordered-containers already pulled it in.
Using unordered-containers for the set seems to make sense, since it
hashes and bloom filter hashes too. (Though different hashes.)
I dunno, never quite know if I should use unordered-containers or containers.
Otherwise use the vendored copy as before.
The library is in Debian testing but not stable. Once it reaches
stable, the vendored copy can be removed.
Did not add it to debian/control because IIRC that's used to build
git-annex on stable too, possibly. However, the Debian maintainer will
probably want to make the package depend on libghc-http-client-restricted-dev
This commit was sponsored by Ilya Shlyakhter on Patreon.
Otherwise use the vendored copy as before.
The library is in Debian testing but not stable. Once it reaches
stable, the vendored copy can be removed.
Did not add it to debian/control because IIRC that's used to build
git-annex on stable too, possibly. However, the Debian maintainer will
probably want to make the package depend on libghc-git-lfs-dev.
This commit was sponsored by Ilya Shlyakhter on Patreon.
Network.HTTP.Client exports makeConnection since 0.5.3.
Debian stable has a newer version than 0.5.3, so bumping the
min version seems better than adding an ifdef.
Remove old code that can be trivially implemented using async in a much
nicer way (that is async exception safe).
I've audited all forkOS calls (except for ones in the assistant),
and this was the last remaining one that is not async exception safe.
The rest look ok to me.
Try to enable special remotes configured with autoenable=yes when git-annex
auto-initialization happens in a new clone of an existing repo. Previously,
git-annex init had to be explicitly run to enable them. That was a bit of a
wart of a special case for users to need to keep in mind.
Special remotes cannot display anything when autoenabled this way, to avoid
interfering with the output of git-annex query commands.
Any error messages will be hidden, and if it fails, nothing is displayed.
The user will realize the remote isn't enable when they try to use it,
and can run git-annex init manually then to try the autoenable again and
see what failed.
That seems like a reasonable approach, and it's less complicated than
communicating something across a pipe in order to display it as a side
message. Other reason not to do that is that, if the first command the
user runs is one like git-annex find that has machine readable output,
any message about autoenable failing would need to not be displayed anyway.
So better to not display a failure message ever, for consistency.
(Had to split out Remote.List.Util to avoid an import cycle.)
* addurl --preserve-filename: New option, uses server-provided filename
without any sanitization, but with some security checking.
Not yet implemented for remotes other than the web.
* addurl, importfeed: Avoid adding filenames with leading '.', instead
it will be replaced with '_'.
This might be considered a security fix, but a CVE seems unwattanted.
It was possible for addurl to create a dotfile, which could change
behavior of some program. It was also possible for a web server to say
the file name was ".git" or "foo/.git". That would not overrwrite the
.git directory, but would cause addurl to fail; of course git won't
add "foo/.git".
sanitizeFilePath is too opinionated to remain in Utility, so moved it.
The changes to mkSafeFilePath are because it used sanitizeFilePath.
In particular:
isDrive will never succeed, because "c:" gets munged to "c_"
".." gets sanitized now
".git" gets sanitized now
It will never be null, because sanitizeFilePath keeps the length
the same, and splitDirectories never returns a null path.
Also, on the off chance a web server suggests a filename of "",
ignore that, rather than trying to save to such a filename, which would
fail in some way.
Extensions got renamed.
Default-Language is required. I had to put Haskell98 because there are
subtle differences between 98 and 2010 and git-annex has always been
built with the default, which was 98 when there was a default. I don't
know how to establish that git-annex will behave the same under 2010.
Avoid running a large number of git cat-file child processes when run with
a large -J value.
This implementation takes care to avoid adding any overhead to git-annex
when run without -J. When run with -J, there is a small bit of added
overhead, to manipulate the resource pool. That optimisation added a
fair bit of complexity.
This does mean that RemoteDaemon.Transport.Tor's call runs it, otherwise
no change, but this is groundwork for doing more such expensive actions
in dupState.
This was very susprising to me that it was not caught by -Wall, so I
enabled -Wincomplete-uni-patterns to catch such things. It found a
second one just lines above, but no others anywhere.
Remote now contains a ParsedRemoteConfig. The parsing happens when the
Remote is constructed, rather than when individual configs are used.
This is more efficient, and it lets initremote/enableremote
reject configs that have unknown fields or unparsable values.
It also allows for improved type safety, as shown in
Remote.Helper.Encryptable where things that used to match on string
configs now match on data types.
This is a work in progress, it does not build yet.
The main risk in this conversion is forgetting to add a field to
RemoteConfigParser. That will prevent using that field with
initremote/enableremote, and will prevent remotes that already are set
up from seeing that configuration. So will need to check carefully that
every field that getRemoteConfigValue is called on has been added to
RemoteConfigParser.
(One such case I need to remember is that credPairRemoteField needs to be
included in the RemoteConfigParser.)
This is a first step toward that goal, using the ProposedAccepted type
in RemoteConfig lets initremote/enableremote reject bad parameters that
were passed in a remote's configuration, while avoiding enableremote
rejecting bad parameters that have already been stored in remote.log
This does not eliminate every place where a remote config is parsed and a
default value is used if the parse false. But, I did fix several
things that expected foo=yes/no and so confusingly accepted foo=true but
treated it like foo=no. There are still some fields that are parsed with
yesNo but not not checked when initializing a remote, and there are other
fields that are parsed in other ways and not checked when initializing a
remote.
This also lays groundwork for rejecting unknown/typoed config keys.
Adds a dependency on filepath-bytestring, an as yet unreleased fork of
filepath that operates on RawFilePath.
Git.Repo also changed to use RawFilePath for the path to the repo.
This does eliminate some RawFilePath -> FilePath -> RawFilePath
conversions. And filepath-bytestring's </> is probably faster.
But I don't expect a major performance improvement from this.
This is mostly groundwork for making Annex.Location use RawFilePath,
which will allow for a conversion-free pipleline.
Since the sqlite branch uses blobs extensively, there are some
performance benefits, ByteStrings now get stored and retrieved w/o
conversion in some cases like in Database.Export.
File mode is octal not decimal. This broke in the conversion to
attoparsec.
(I've submitted the content of Utility.Attoparsec to the attoparsec
developers.)
Test suite passes 100% now.
Finally builds (oh the agoncy of making it build), but still very
unmergable, only Command.Find is included and lots of stuff is badly
hacked to make it compile.
Benchmarking vs master, this git-annex find is significantly faster!
Specifically:
num files old new speedup
48500 4.77 3.73 28%
12500 1.36 1.02 66%
20 0.075 0.074 0% (so startup time is unchanged)
That's without really finishing the optimization. Things still to do:
* Eliminate all the fromRawFilePath, toRawFilePath, encodeBS,
decodeBS conversions.
* Use versions of IO actions like getFileStatus that take a RawFilePath.
* Eliminate some Data.ByteString.Lazy.toStrict, which is a slow copy.
* Use ByteString for parsing git config to speed up startup.
It's likely several of those will speed up git-annex find further.
And other commands will certianly benefit even more.
Goal is to make git-annex faster by using ByteString for all the
worktree traversal. For now, this is focusing on Command.Find,
in order to benchmark how much it helps. (All other commands are
temporarily disabled)
Currently in a very bad unbuildable in-between state.
Renamed the database to .git/annex/keysdb;
the old .git/annex/keys gets deleted during the upgrade.
It is possible that an old git-annex process is running during the
upgrade. If so, it will be able to continue using the old keys db until the
upgrade is complete, and then will presumably fail in some ugly way. Or
perhaps the upgrade will be unable to delete the open files on some
systems, and so fail with an ugly error message.
It's also possible for multiple processes to be running the upgrade
concurrently. That should be fine; they will both write the same
information into the keys db.
Other databases still need to be upgraded.
Rescued from commit 11d6e2e260 which removed
db benchmarks in favor of benchmarking arbitrary git-annex commands. Which
is nice and general, but microbenchmarks are useful too.
It would have been a lot less round-about to just make git annex dead
also add the uuids of sameas remotes to the trust.log as dead.
But, that would fail in the case where there's an unmerged other clone
that has a sameas remote that the current repo does not know about.
Then it would not get marked as dead.
Handling it at transition time avoids that scenario.
Note that the generation of trustmap' in dropDead should only
happen once, due to the partial application.
This solves the problem of sameas remotes trampling over per-remote
state. Used for:
* per-remote state, of course
* per-remote metadata, also of course
* per-remote content identifiers, because two remote implementations
could in theory generate the same content identifier for two different
peices of content
While chunk logs are per-remote data, they don't use this, because the
number and size of chunks stored is a common property across sameas
remotes.
External special remote had a complication, where it was theoretically
possible for a remote to send SETSTATE or GETSTATE during INITREMOTE or
EXPORTSUPPORTED. Since the uuid of the remote is typically generate in
Remote.setup, it would only be possible to pass a Maybe
RemoteStateHandle into it, and it would otherwise have to construct its
own. Rather than go that route, I decided to send an ERROR in this case.
It seems unlikely that any existing external special remote will be
affected. They would have to make up a git-annex key, and set state for
some reason during INITREMOTE. I can imagine such a hack, but it doesn't
seem worth complicating the code in such an ugly way to support it.
Unfortunately, both TestRemote and Annex.Import needed the Remote
to have a new field added that holds its RemoteStateHandle.
I found a way to avoid inheritance complicating anything outside of
Logs.Remote. It seems fine to require all inherited values to be
inherited and not set in the sameas remote's config. Since inherited
values will be used for stuff like encryption and perhaps chunking, which
control the actual content stored on the remote, it seems likely that
there will not be any reason to need them to vary between two remotes
that access the same underlying data store.
The newer version of containers is free; the minimum ghc version is
bundled with a newer version than that.
