git-annex/Command/Expire.hs

117 lines
3.3 KiB
Haskell
Raw Normal View History

{- git-annex command
-
- Copyright 2015 Joey Hess <id@joeyh.name>
-
- Licensed under the GNU AGPL version 3 or higher.
-}
module Command.Expire where
import Command
import Logs.Activity
import Logs.UUID
import Logs.MapLog
import Logs.Trust
import Annex.UUID
import Annex.VectorClock
import qualified Remote
import Utility.HumanTime
2020-02-28 16:57:55 +00:00
import Control.Monad.Fail as Fail (MonadFail(..))
import Data.Time.Clock.POSIX
import qualified Data.Map as M
cmd :: Command
2015-07-10 20:26:23 +00:00
cmd = command "expire" SectionMaintenance
"expire inactive repositories"
paramExpire (seek <$$> optParser)
paramExpire :: String
paramExpire = (paramRepeating $ paramOptional paramRemote ++ ":" ++ paramTime)
2015-07-10 20:26:23 +00:00
data ExpireOptions = ExpireOptions
{ expireParams :: CmdParams
, activityOption :: Maybe Activity
, noActOption :: Bool
}
2015-07-10 20:26:23 +00:00
optParser :: CmdParamsDesc -> Parser ExpireOptions
optParser desc = ExpireOptions
<$> cmdParams desc
<*> optional (option (str >>= parseActivity)
( long "activity" <> metavar paramName
<> help "specify activity that prevents expiry"
))
<*> switch
( long "no-act"
<> help "don't really do anything"
)
2015-04-05 19:02:55 +00:00
2015-07-10 20:26:23 +00:00
seek :: ExpireOptions -> CommandSeek
seek o = do
expire <- parseExpire (expireParams o)
actlog <- lastActivities (activityOption o)
u <- getUUID
us <- filter (/= u) . M.keys <$> uuidDescMap
descs <- uuidDescMap
commandActions $ map (start expire (noActOption o) actlog descs) us
start :: Expire -> Bool -> Log Activity -> UUIDDescMap -> UUID -> CommandStart
2015-04-05 19:02:55 +00:00
start (Expire expire) noact actlog descs u =
case lastact of
make CommandStart return a StartMessage The goal is to be able to run CommandStart in the main thread when -J is used, rather than unncessarily passing it off to a worker thread, which incurs overhead that is signficant when the CommandStart is going to quickly decide to stop. To do that, the message it displays needs to be displayed in the worker thread, after the CommandStart has run. Also, the change will mean that CommandStart will no longer necessarily run with the same Annex state as CommandPerform. While its docs already said it should avoid modifying Annex state, I audited all the CommandStart code as part of the conversion. (Note that CommandSeek already sometimes runs with a different Annex state, and that has not been a source of any problems, so I am not too worried that this change will lead to breakage going forward.) The only modification of Annex state I found was it calling allowMessages in some Commands that default to noMessages. Dealt with that by adding a startCustomOutput and a startingUsualMessages. This lets a command start with noMessages and then select the output it wants for each CommandStart. One bit of breakage: onlyActionOn has been removed from commands that used it. The plan is that, since a StartMessage contains an ActionItem, when a Key can be extracted from that, the parallel job runner can run onlyActionOn' automatically. Then commands won't need to worry about this detail. Future work. Otherwise, this was a fairly straightforward process of making each CommandStart compile again. Hopefully other behavior changes were mostly avoided. In a few cases, a command had a CommandStart that called a CommandPerform that then called showStart multiple times. I have collapsed those down to a single start action. The main command to perhaps suffer from it is Command.Direct, which used to show a start for each file, and no longer does. Another minor behavior change is that some commands used showStart before, but had an associated file and a Key available, so were changed to ShowStart with an ActionItemAssociatedFile. That will not change the normal output or behavior, but --json output will now include the key. This should not break it for anyone using a real json parser.
2019-06-06 19:42:30 +00:00
Just ent | notexpired ent -> checktrust (== DeadTrusted) $
starting "unexpire" ai si $ do
make CommandStart return a StartMessage The goal is to be able to run CommandStart in the main thread when -J is used, rather than unncessarily passing it off to a worker thread, which incurs overhead that is signficant when the CommandStart is going to quickly decide to stop. To do that, the message it displays needs to be displayed in the worker thread, after the CommandStart has run. Also, the change will mean that CommandStart will no longer necessarily run with the same Annex state as CommandPerform. While its docs already said it should avoid modifying Annex state, I audited all the CommandStart code as part of the conversion. (Note that CommandSeek already sometimes runs with a different Annex state, and that has not been a source of any problems, so I am not too worried that this change will lead to breakage going forward.) The only modification of Annex state I found was it calling allowMessages in some Commands that default to noMessages. Dealt with that by adding a startCustomOutput and a startingUsualMessages. This lets a command start with noMessages and then select the output it wants for each CommandStart. One bit of breakage: onlyActionOn has been removed from commands that used it. The plan is that, since a StartMessage contains an ActionItem, when a Key can be extracted from that, the parallel job runner can run onlyActionOn' automatically. Then commands won't need to worry about this detail. Future work. Otherwise, this was a fairly straightforward process of making each CommandStart compile again. Hopefully other behavior changes were mostly avoided. In a few cases, a command had a CommandStart that called a CommandPerform that then called showStart multiple times. I have collapsed those down to a single start action. The main command to perhaps suffer from it is Command.Direct, which used to show a start for each file, and no longer does. Another minor behavior change is that some commands used showStart before, but had an associated file and a Key available, so were changed to ShowStart with an ActionItemAssociatedFile. That will not change the normal output or behavior, but --json output will now include the key. This should not break it for anyone using a real json parser.
2019-06-06 19:42:30 +00:00
showNote =<< whenactive
unless noact $
trustSet u SemiTrusted
next $ return True
_ -> checktrust (/= DeadTrusted) $
starting "expire" ai si $ do
make CommandStart return a StartMessage The goal is to be able to run CommandStart in the main thread when -J is used, rather than unncessarily passing it off to a worker thread, which incurs overhead that is signficant when the CommandStart is going to quickly decide to stop. To do that, the message it displays needs to be displayed in the worker thread, after the CommandStart has run. Also, the change will mean that CommandStart will no longer necessarily run with the same Annex state as CommandPerform. While its docs already said it should avoid modifying Annex state, I audited all the CommandStart code as part of the conversion. (Note that CommandSeek already sometimes runs with a different Annex state, and that has not been a source of any problems, so I am not too worried that this change will lead to breakage going forward.) The only modification of Annex state I found was it calling allowMessages in some Commands that default to noMessages. Dealt with that by adding a startCustomOutput and a startingUsualMessages. This lets a command start with noMessages and then select the output it wants for each CommandStart. One bit of breakage: onlyActionOn has been removed from commands that used it. The plan is that, since a StartMessage contains an ActionItem, when a Key can be extracted from that, the parallel job runner can run onlyActionOn' automatically. Then commands won't need to worry about this detail. Future work. Otherwise, this was a fairly straightforward process of making each CommandStart compile again. Hopefully other behavior changes were mostly avoided. In a few cases, a command had a CommandStart that called a CommandPerform that then called showStart multiple times. I have collapsed those down to a single start action. The main command to perhaps suffer from it is Command.Direct, which used to show a start for each file, and no longer does. Another minor behavior change is that some commands used showStart before, but had an associated file and a Key available, so were changed to ShowStart with an ActionItemAssociatedFile. That will not change the normal output or behavior, but --json output will now include the key. This should not break it for anyone using a real json parser.
2019-06-06 19:42:30 +00:00
showNote =<< whenactive
unless noact $
trustSet u DeadTrusted
next $ return True
where
lastact = changed <$> M.lookup u actlog
whenactive = case lastact of
Just (VectorClock c) -> do
d <- liftIO $ durationSince $ posixSecondsToUTCTime c
return $ "last active: " ++ fromDuration d ++ " ago"
_ -> return "no activity"
desc = fromUUID u ++ " " ++ fromUUIDDesc (fromMaybe mempty (M.lookup u descs))
ai = ActionItemOther (Just desc)
si = SeekInput []
notexpired ent = case ent of
Unknown -> False
VectorClock c -> case lookupexpire of
Just (Just expiretime) -> c >= expiretime
_ -> True
lookupexpire = headMaybe $ catMaybes $
map (`M.lookup` expire) [Just u, Nothing]
make CommandStart return a StartMessage The goal is to be able to run CommandStart in the main thread when -J is used, rather than unncessarily passing it off to a worker thread, which incurs overhead that is signficant when the CommandStart is going to quickly decide to stop. To do that, the message it displays needs to be displayed in the worker thread, after the CommandStart has run. Also, the change will mean that CommandStart will no longer necessarily run with the same Annex state as CommandPerform. While its docs already said it should avoid modifying Annex state, I audited all the CommandStart code as part of the conversion. (Note that CommandSeek already sometimes runs with a different Annex state, and that has not been a source of any problems, so I am not too worried that this change will lead to breakage going forward.) The only modification of Annex state I found was it calling allowMessages in some Commands that default to noMessages. Dealt with that by adding a startCustomOutput and a startingUsualMessages. This lets a command start with noMessages and then select the output it wants for each CommandStart. One bit of breakage: onlyActionOn has been removed from commands that used it. The plan is that, since a StartMessage contains an ActionItem, when a Key can be extracted from that, the parallel job runner can run onlyActionOn' automatically. Then commands won't need to worry about this detail. Future work. Otherwise, this was a fairly straightforward process of making each CommandStart compile again. Hopefully other behavior changes were mostly avoided. In a few cases, a command had a CommandStart that called a CommandPerform that then called showStart multiple times. I have collapsed those down to a single start action. The main command to perhaps suffer from it is Command.Direct, which used to show a start for each file, and no longer does. Another minor behavior change is that some commands used showStart before, but had an associated file and a Key available, so were changed to ShowStart with an ActionItemAssociatedFile. That will not change the normal output or behavior, but --json output will now include the key. This should not break it for anyone using a real json parser.
2019-06-06 19:42:30 +00:00
checktrust want = stopUnless (want <$> lookupTrust u)
data Expire = Expire (M.Map (Maybe UUID) (Maybe POSIXTime))
parseExpire :: [String] -> Annex Expire
parseExpire [] = giveup "Specify an expire time."
parseExpire ps = do
now <- liftIO getPOSIXTime
Expire . M.fromList <$> mapM (parse now) ps
where
parse now s = case separate (== ':') s of
(t, []) -> return (Nothing, parsetime now t)
(n, t) -> do
r <- Remote.nameToUUID n
return (Just r, parsetime now t)
parsetime _ "never" = Nothing
parsetime now s = case parseDuration s of
Right d -> Just (now - durationToPOSIXTime d)
Left e -> giveup $ "bad expire time: " ++ e
parseActivity :: MonadFail m => String -> m Activity
2015-07-10 20:26:23 +00:00
parseActivity s = case readish s of
Nothing -> Fail.fail $ "Unknown activity. Choose from: " ++
unwords (map show allActivities)
2015-07-10 20:26:23 +00:00
Just v -> return v