2011-04-28 21:21:45 +00:00
|
|
|
{- A remote that provides hooks to run shell commands.
|
|
|
|
-
|
2020-01-14 19:41:34 +00:00
|
|
|
- Copyright 2011-2020 Joey Hess <id@joeyh.name>
|
2011-04-28 21:21:45 +00:00
|
|
|
-
|
2019-03-13 19:48:14 +00:00
|
|
|
- Licensed under the GNU AGPL version 3 or higher.
|
2011-04-28 21:21:45 +00:00
|
|
|
-}
|
|
|
|
|
incremental verify for byteRetriever special remotes
Several special remotes verify content while it is being retrieved,
avoiding a separate checksum pass. They are: S3, bup, ddar, and
gcrypt (with a local repository).
Not done when using chunking, yet.
Complicated by Retriever needing to change to be polymorphic. Which in turn
meant RankNTypes is needed, and also needed some code changes. The
change in Remote.External does not change behavior at all but avoids
the type checking failing because of a "rigid, skolem type" which
"would escape its scope". So I refactored slightly to make the type
checker's job easier there.
Unfortunately, directory uses fileRetriever (except when chunked),
so it is not amoung the improved ones. Fixing that would need a way for
FileRetriever to return a Verification. But, since the file retrieved
may be encrypted or chunked, it would be extra work to always
incrementally checksum the file while retrieving it. Hm.
Some other special remotes use fileRetriever, and so don't get incremental
verification, but could be converted to byteRetriever later. One is
GitLFS, which uses downloadConduit, which writes to the file, so could
verify as it goes. Other special remotes like web could too, but don't
use Remote.Helper.Special and so will need to be addressed separately.
Sponsored-by: Dartmouth College's DANDI project
2021-08-11 17:43:30 +00:00
|
|
|
{-# LANGUAGE RankNTypes #-}
|
|
|
|
|
2011-04-28 21:21:45 +00:00
|
|
|
module Remote.Hook (remote) where
|
|
|
|
|
2016-01-20 20:36:33 +00:00
|
|
|
import Annex.Common
|
2011-06-02 01:56:04 +00:00
|
|
|
import Types.Remote
|
2014-02-11 18:06:50 +00:00
|
|
|
import Types.Creds
|
2011-06-30 17:16:57 +00:00
|
|
|
import qualified Git
|
2019-12-05 18:36:43 +00:00
|
|
|
import Git.Types (fromConfigKey, fromConfigValue)
|
2011-04-28 21:21:45 +00:00
|
|
|
import Config
|
2013-03-13 20:16:01 +00:00
|
|
|
import Config.Cost
|
2013-09-07 22:38:00 +00:00
|
|
|
import Annex.UUID
|
2020-01-14 19:41:34 +00:00
|
|
|
import Annex.SpecialRemote.Config
|
2011-08-17 00:49:54 +00:00
|
|
|
import Remote.Helper.Special
|
2019-02-20 19:55:01 +00:00
|
|
|
import Remote.Helper.ExportImport
|
2014-01-14 20:42:10 +00:00
|
|
|
import Utility.Env
|
2015-04-04 18:34:03 +00:00
|
|
|
import Messages.Progress
|
2020-01-10 18:10:20 +00:00
|
|
|
import Types.ProposedAccepted
|
2011-04-28 21:21:45 +00:00
|
|
|
|
2015-01-28 19:55:17 +00:00
|
|
|
import qualified Data.Map as M
|
|
|
|
|
2013-05-21 23:19:03 +00:00
|
|
|
type Action = String
|
|
|
|
type HookName = String
|
|
|
|
|
2011-12-31 08:11:39 +00:00
|
|
|
remote :: RemoteType
|
2020-01-14 19:41:34 +00:00
|
|
|
remote = specialRemoteType $ RemoteType
|
2017-09-07 17:45:31 +00:00
|
|
|
{ typename = "hook"
|
|
|
|
, enumerate = const (findSpecialRemotes "hooktype")
|
|
|
|
, generate = gen
|
2020-01-14 19:41:34 +00:00
|
|
|
, configParser = mkRemoteConfigParser
|
2020-01-20 19:20:04 +00:00
|
|
|
[ optionalStringParser hooktypeField
|
|
|
|
(FieldDesc "(required) specify collection of hooks to use")
|
|
|
|
]
|
2017-09-07 17:45:31 +00:00
|
|
|
, setup = hookSetup
|
|
|
|
, exportSupported = exportUnsupported
|
2019-02-20 19:55:01 +00:00
|
|
|
, importSupported = importUnsupported
|
add thirdPartyPopulated interface
This is to support, eg a borg repo as a special remote, which is
populated not by running git-annex commands, but by using borg. Then
git-annex sync lists the content of the remote, learns which files are
annex objects, and treats those as present in the remote.
So, most of the import machinery is reused, to a new purpose. While
normally importtree maintains a remote tracking branch, this does not,
because the files stored in the remote are annex object files, not
user-visible filenames. But, internally, a git tree is still generated,
of the files on the remote that are annex objects. This tree is used
by retrieveExportWithContentIdentifier, etc. As with other import/export
remotes, that the tree is recorded in the export log, and gets grafted
into the git-annex branch.
importKey changed to be able to return Nothing, to indicate when an
ImportLocation is not an annex object and so should be skipped from
being included in the tree.
It did not seem to make sense to have git-annex import do this, since
from the user's perspective, it's not like other imports. So only
git-annex sync does it.
Note that, git-annex sync does not yet download objects from such
remotes that are preferred content. importKeys is run with
content downloading disabled, to avoid getting the content of all
objects. Perhaps what's needed is for seekSyncContent to be run with these
remotes, but I don't know if it will just work (in particular, it needs
to avoid trying to transfer objects to them), so I skipped that for now.
(Untested and unused as of yet.)
This commit was sponsored by Jochen Bartl on Patreon.
2020-12-18 18:52:57 +00:00
|
|
|
, thirdPartyPopulated = False
|
2017-09-07 17:45:31 +00:00
|
|
|
}
|
2011-04-28 21:21:45 +00:00
|
|
|
|
2020-01-14 19:41:34 +00:00
|
|
|
hooktypeField :: RemoteConfigField
|
|
|
|
hooktypeField = Accepted "hooktype"
|
|
|
|
|
fix encryption of content to gcrypt and git-lfs
Fix serious regression in gcrypt and encrypted git-lfs remotes.
Since version 7.20200202.7, git-annex incorrectly stored content
on those remotes without encrypting it.
Problem was, Remote.Git enumerates all git remotes, including git-lfs
and gcrypt. It then dispatches to those. So, Remote.List used the
RemoteConfigParser from Remote.Git, instead of from git-lfs or gcrypt,
and that parser does not know about encryption fields, so did not
include them in the ParsedRemoteConfig. (Also didn't include other
fields specific to those remotes, perhaps chunking etc also didn't
get through.)
To fix, had to move RemoteConfig parsing down into the generate methods
of each remote, rather than doing it in Remote.List.
And a consequence of that was that ParsedRemoteConfig had to change to
include the RemoteConfig that got parsed, so that testremote can
generate a new remote based on an existing remote.
(I would have rather fixed this just inside Remote.Git, but that was not
practical, at least not w/o re-doing work that Remote.List already did.
Big ugly mostly mechanical patch seemed preferable to making git-annex
slower.)
2020-02-26 21:20:56 +00:00
|
|
|
gen :: Git.Repo -> UUID -> RemoteConfig -> RemoteGitConfig -> RemoteStateHandle -> Annex (Maybe Remote)
|
|
|
|
gen r u rc gc rs = do
|
|
|
|
c <- parsedRemoteConfig remote rc
|
2023-01-12 17:42:28 +00:00
|
|
|
cst <- remoteCost gc c expensiveRemoteCost
|
2014-08-03 19:35:23 +00:00
|
|
|
return $ Just $ specialRemote c
|
2020-05-13 15:50:31 +00:00
|
|
|
(store hooktype)
|
|
|
|
(retrieve hooktype)
|
|
|
|
(remove hooktype)
|
remove "checking remotename" message
This fixes fsck of a remote that uses chunking displaying
(checking remotename) (checking remotename)" for every chunk.
Also, some remotes displayed the message, and others did not, with no
consistency. It was originally displayed only when accessing remotes
that were expensive or might involve a password prompt, I think, but
nothing in the API said when to do it so it became an inconsistent mess.
Originally I thought fsck should always display it. But it only displays
in fsck --from remote, so the user knows the remote is being accessed,
so there is no reason to tell them it's accessing it over and over.
It was also possible for git-annex move to sometimes display it twice,
due to checking if content is present twice. But, the user of move
specifies --from/--to, so it does not need to display when it's
accessing the remote, as the user expects it to access the remote.
git-annex get might display it, but only if the remote also supports
hasKeyCheap, which is really only local git remotes, which didn't
display it always; and in any case nothing displayed it before hasKeyCheap,
which is checked first, so I don't think this needs to display it ever.
mirror is like move. And that's all the main places it would have been
displayed.
This commit was sponsored by Jochen Bartl on Patreon.
2021-04-27 16:50:45 +00:00
|
|
|
(checkKey hooktype)
|
2014-12-16 19:26:13 +00:00
|
|
|
Remote
|
|
|
|
{ uuid = u
|
|
|
|
, cost = cst
|
|
|
|
, name = Git.repoDescribe r
|
|
|
|
, storeKey = storeKeyDummy
|
2020-05-13 21:05:56 +00:00
|
|
|
, retrieveKeyFile = retrieveKeyFileDummy
|
|
|
|
, retrieveKeyFileCheap = Nothing
|
2018-06-21 15:35:27 +00:00
|
|
|
-- A hook could use http and be vulnerable to
|
|
|
|
-- redirect to file:// attacks, etc.
|
2018-09-25 19:32:50 +00:00
|
|
|
, retrievalSecurityPolicy = mkRetrievalVerifiableKeysSecure gc
|
2014-12-16 19:26:13 +00:00
|
|
|
, removeKey = removeKeyDummy
|
2015-10-08 19:01:38 +00:00
|
|
|
, lockContent = Nothing
|
2014-12-16 19:26:13 +00:00
|
|
|
, checkPresent = checkPresentDummy
|
|
|
|
, checkPresentCheap = False
|
2017-09-01 17:02:07 +00:00
|
|
|
, exportActions = exportUnsupported
|
2019-02-20 19:55:01 +00:00
|
|
|
, importActions = importUnsupported
|
2014-12-16 19:26:13 +00:00
|
|
|
, whereisKey = Nothing
|
|
|
|
, remoteFsck = Nothing
|
|
|
|
, repairRepo = Nothing
|
|
|
|
, config = c
|
|
|
|
, localpath = Nothing
|
2018-06-04 18:31:55 +00:00
|
|
|
, getRepo = return r
|
2014-12-16 19:26:13 +00:00
|
|
|
, gitconfig = gc
|
|
|
|
, readonly = False
|
2018-08-30 15:12:18 +00:00
|
|
|
, appendonly = False
|
2020-12-28 19:08:53 +00:00
|
|
|
, untrustworthy = False
|
2014-12-16 19:26:13 +00:00
|
|
|
, availability = GloballyAvailable
|
|
|
|
, remotetype = remote
|
fix encryption of content to gcrypt and git-lfs
Fix serious regression in gcrypt and encrypted git-lfs remotes.
Since version 7.20200202.7, git-annex incorrectly stored content
on those remotes without encrypting it.
Problem was, Remote.Git enumerates all git remotes, including git-lfs
and gcrypt. It then dispatches to those. So, Remote.List used the
RemoteConfigParser from Remote.Git, instead of from git-lfs or gcrypt,
and that parser does not know about encryption fields, so did not
include them in the ParsedRemoteConfig. (Also didn't include other
fields specific to those remotes, perhaps chunking etc also didn't
get through.)
To fix, had to move RemoteConfig parsing down into the generate methods
of each remote, rather than doing it in Remote.List.
And a consequence of that was that ParsedRemoteConfig had to change to
include the RemoteConfig that got parsed, so that testremote can
generate a new remote based on an existing remote.
(I would have rather fixed this just inside Remote.Git, but that was not
practical, at least not w/o re-doing work that Remote.List already did.
Big ugly mostly mechanical patch seemed preferable to making git-annex
slower.)
2020-02-26 21:20:56 +00:00
|
|
|
, mkUnavailable = gen r u rc
|
add RemoteStateHandle
This solves the problem of sameas remotes trampling over per-remote
state. Used for:
* per-remote state, of course
* per-remote metadata, also of course
* per-remote content identifiers, because two remote implementations
could in theory generate the same content identifier for two different
peices of content
While chunk logs are per-remote data, they don't use this, because the
number and size of chunks stored is a common property across sameas
remotes.
External special remote had a complication, where it was theoretically
possible for a remote to send SETSTATE or GETSTATE during INITREMOTE or
EXPORTSUPPORTED. Since the uuid of the remote is typically generate in
Remote.setup, it would only be possible to pass a Maybe
RemoteStateHandle into it, and it would otherwise have to construct its
own. Rather than go that route, I decided to send an ERROR in this case.
It seems unlikely that any existing external special remote will be
affected. They would have to make up a git-annex key, and set state for
some reason during INITREMOTE. I can imagine such a hack, but it doesn't
seem worth complicating the code in such an ugly way to support it.
Unfortunately, both TestRemote and Annex.Import needed the Remote
to have a new field added that holds its RemoteStateHandle.
2019-10-14 16:33:27 +00:00
|
|
|
(gc { remoteAnnexHookType = Just "!dne!" })
|
|
|
|
rs
|
2014-12-16 19:26:13 +00:00
|
|
|
, getInfo = return [("hooktype", hooktype)]
|
|
|
|
, claimUrl = Nothing
|
|
|
|
, checkUrl = Nothing
|
add RemoteStateHandle
This solves the problem of sameas remotes trampling over per-remote
state. Used for:
* per-remote state, of course
* per-remote metadata, also of course
* per-remote content identifiers, because two remote implementations
could in theory generate the same content identifier for two different
peices of content
While chunk logs are per-remote data, they don't use this, because the
number and size of chunks stored is a common property across sameas
remotes.
External special remote had a complication, where it was theoretically
possible for a remote to send SETSTATE or GETSTATE during INITREMOTE or
EXPORTSUPPORTED. Since the uuid of the remote is typically generate in
Remote.setup, it would only be possible to pass a Maybe
RemoteStateHandle into it, and it would otherwise have to construct its
own. Rather than go that route, I decided to send an ERROR in this case.
It seems unlikely that any existing external special remote will be
affected. They would have to make up a git-annex key, and set state for
some reason during INITREMOTE. I can imagine such a hack, but it doesn't
seem worth complicating the code in such an ugly way to support it.
Unfortunately, both TestRemote and Annex.Import needed the Remote
to have a new field added that holds its RemoteStateHandle.
2019-10-14 16:33:27 +00:00
|
|
|
, remoteStateHandle = rs
|
2014-12-16 19:26:13 +00:00
|
|
|
}
|
2013-01-01 17:52:47 +00:00
|
|
|
where
|
2016-11-16 01:29:54 +00:00
|
|
|
hooktype = fromMaybe (giveup "missing hooktype") $ remoteAnnexHookType gc
|
2011-04-28 21:21:45 +00:00
|
|
|
|
2017-02-07 18:35:58 +00:00
|
|
|
hookSetup :: SetupStage -> Maybe UUID -> Maybe CredPair -> RemoteConfig -> RemoteGitConfig -> Annex (RemoteConfig, UUID)
|
|
|
|
hookSetup _ mu _ c gc = do
|
2013-09-07 22:38:00 +00:00
|
|
|
u <- maybe (liftIO genUUID) return mu
|
2020-01-10 18:10:20 +00:00
|
|
|
let hooktype = maybe (giveup "Specify hooktype=") fromProposedAccepted $
|
2020-01-14 19:41:34 +00:00
|
|
|
M.lookup hooktypeField c
|
2016-05-23 21:27:15 +00:00
|
|
|
(c', _encsetup) <- encryptionSetup c gc
|
2018-03-27 16:41:57 +00:00
|
|
|
gitConfigSpecialRemote u c' [("hooktype", hooktype)]
|
2013-09-07 22:38:00 +00:00
|
|
|
return (c', u)
|
2011-04-28 21:21:45 +00:00
|
|
|
|
2013-05-21 23:19:03 +00:00
|
|
|
hookEnv :: Action -> Key -> Maybe FilePath -> IO (Maybe [(String, String)])
|
|
|
|
hookEnv action k f = Just <$> mergeenv (fileenv f ++ keyenv)
|
2012-11-11 04:51:07 +00:00
|
|
|
where
|
2014-01-14 20:42:10 +00:00
|
|
|
mergeenv l = addEntries l <$> getEnvironment
|
2014-06-10 23:20:14 +00:00
|
|
|
envvar s v = ("ANNEX_" ++ s, v)
|
2012-11-11 04:51:07 +00:00
|
|
|
keyenv = catMaybes
|
2019-01-14 17:03:35 +00:00
|
|
|
[ Just $ envvar "KEY" (serializeKey k)
|
2014-06-10 23:20:14 +00:00
|
|
|
, Just $ envvar "ACTION" action
|
|
|
|
, envvar "HASH_1" <$> headMaybe hashbits
|
|
|
|
, envvar "HASH_2" <$> headMaybe (drop 1 hashbits)
|
2012-11-11 04:51:07 +00:00
|
|
|
]
|
|
|
|
fileenv Nothing = []
|
2014-06-10 23:20:14 +00:00
|
|
|
fileenv (Just file) = [envvar "FILE" file]
|
2019-12-11 18:12:22 +00:00
|
|
|
hashbits = map takeDirectory $ splitPath $
|
|
|
|
fromRawFilePath $ hashDirMixed def k
|
2011-04-28 21:21:45 +00:00
|
|
|
|
2013-05-21 23:19:03 +00:00
|
|
|
lookupHook :: HookName -> Action -> Annex (Maybe String)
|
|
|
|
lookupHook hookname action = do
|
2019-12-05 18:36:43 +00:00
|
|
|
command <- fromConfigValue <$> getConfig hook mempty
|
2011-04-28 21:21:45 +00:00
|
|
|
if null command
|
|
|
|
then do
|
2019-12-05 18:36:43 +00:00
|
|
|
fallback <- fromConfigValue <$> getConfig hookfallback mempty
|
2013-05-21 23:19:03 +00:00
|
|
|
if null fallback
|
|
|
|
then do
|
filter out control characters in warning messages
Converted warning and similar to use StringContainingQuotedPath. Most
warnings are static strings, some do refer to filepaths that need to be
quoted, and others don't need quoting.
Note that, since quote filters out control characters of even
UnquotedString, this makes all warnings safe, even when an attacker
sneaks in a control character in some other way.
When json is being output, no quoting is done, since json gets its own
quoting.
This does, as a side effect, make warning messages in json output not
be indented. The indentation is only needed to offset warning messages
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brett Eisenberg on Patreon
2023-04-10 18:47:32 +00:00
|
|
|
warning $ UnquotedString $ "missing configuration for " ++ fromConfigKey hook ++ " or " ++ fromConfigKey hookfallback
|
2013-05-21 23:19:03 +00:00
|
|
|
return Nothing
|
|
|
|
else return $ Just fallback
|
2011-04-28 21:21:45 +00:00
|
|
|
else return $ Just command
|
2012-11-11 04:51:07 +00:00
|
|
|
where
|
2021-08-11 00:45:02 +00:00
|
|
|
hook = annexConfig $ encodeBS $ hookname ++ "-" ++ action ++ "-hook"
|
|
|
|
hookfallback = annexConfig $ encodeBS $ hookname ++ "-hook"
|
2011-04-28 21:21:45 +00:00
|
|
|
|
2020-05-13 18:03:00 +00:00
|
|
|
runHook :: HookName -> Action -> Key -> Maybe FilePath -> Annex ()
|
|
|
|
runHook hook action k f = lookupHook hook action >>= \case
|
|
|
|
Just command -> do
|
|
|
|
showOutput -- make way for hook output
|
|
|
|
environ <- liftIO (hookEnv action k f)
|
|
|
|
unlessM (progressCommandEnv "sh" [Param "-c", Param command] environ) $
|
|
|
|
giveup $ hook ++ " hook exited nonzero!"
|
|
|
|
Nothing -> giveup $ action ++ " hook misconfigured"
|
|
|
|
|
|
|
|
runHook' :: HookName -> Action -> Key -> Maybe FilePath -> Annex Bool -> Annex Bool
|
|
|
|
runHook' hook action k f a = maybe (return False) run =<< lookupHook hook action
|
2012-11-11 04:51:07 +00:00
|
|
|
where
|
|
|
|
run command = do
|
|
|
|
showOutput -- make way for hook output
|
2015-04-04 18:34:03 +00:00
|
|
|
ifM (progressCommandEnv "sh" [Param "-c", Param command] =<< liftIO (hookEnv action k f))
|
2012-11-11 04:51:07 +00:00
|
|
|
( a
|
|
|
|
, do
|
filter out control characters in warning messages
Converted warning and similar to use StringContainingQuotedPath. Most
warnings are static strings, some do refer to filepaths that need to be
quoted, and others don't need quoting.
Note that, since quote filters out control characters of even
UnquotedString, this makes all warnings safe, even when an attacker
sneaks in a control character in some other way.
When json is being output, no quoting is done, since json gets its own
quoting.
This does, as a side effect, make warning messages in json output not
be indented. The indentation is only needed to offset warning messages
underneath the display of the file they apply to, so that's ok.
Sponsored-by: Brett Eisenberg on Patreon
2023-04-10 18:47:32 +00:00
|
|
|
warning $ UnquotedString $ hook ++ " hook exited nonzero!"
|
2012-11-11 04:51:07 +00:00
|
|
|
return False
|
|
|
|
)
|
2011-04-28 21:21:45 +00:00
|
|
|
|
2014-08-02 21:25:16 +00:00
|
|
|
store :: HookName -> Storer
|
2020-05-13 18:03:00 +00:00
|
|
|
store h = fileStorer $ \k src _p -> runHook h "store" k (Just src)
|
2011-04-28 21:21:45 +00:00
|
|
|
|
2014-08-02 21:25:16 +00:00
|
|
|
retrieve :: HookName -> Retriever
|
|
|
|
retrieve h = fileRetriever $ \d k _p ->
|
2021-08-16 20:22:00 +00:00
|
|
|
unlessM (runHook' h "retrieve" k (Just (fromRawFilePath d)) $ return True) $
|
2016-11-16 01:29:54 +00:00
|
|
|
giveup "failed to retrieve content"
|
2012-01-20 17:23:11 +00:00
|
|
|
|
run Preparer to get Remover and CheckPresent actions
This will allow special remotes to eg, open a http connection and reuse it,
while checking if chunks are present, or removing chunks.
S3 and WebDAV both need this to support chunks with reasonable speed.
Note that a special remote might want to cache a http connection across
multiple requests. A simple case of this is that CheckPresent is typically
called before Store or Remove. A remote using this interface can certianly
use a Preparer that eg, uses a MVar to cache a http connection.
However, it's up to the remote to then deal with things like stale or
stalled http connections when eg, doing a series of downloads from a remote
and other places. There could be long delays between calls to a remote,
which could lead to eg, http connection stalls; the machine might even
move to a new network, etc.
It might be nice to improve this interface later to allow
the simple case without needing to handle the full complex case.
One way to do it would be to have a `Transaction SpecialRemote cache`,
where SpecialRemote contains methods for Storer, Retriever, Remover, and
CheckPresent, that all expect to be passed a `cache`.
2014-08-06 18:28:36 +00:00
|
|
|
remove :: HookName -> Remover
|
2020-05-14 18:08:09 +00:00
|
|
|
remove h k =
|
|
|
|
unlessM (runHook' h "remove" k Nothing $ return True) $
|
|
|
|
giveup "failed to remove content"
|
2011-04-28 21:21:45 +00:00
|
|
|
|
remove "checking remotename" message
This fixes fsck of a remote that uses chunking displaying
(checking remotename) (checking remotename)" for every chunk.
Also, some remotes displayed the message, and others did not, with no
consistency. It was originally displayed only when accessing remotes
that were expensive or might involve a password prompt, I think, but
nothing in the API said when to do it so it became an inconsistent mess.
Originally I thought fsck should always display it. But it only displays
in fsck --from remote, so the user knows the remote is being accessed,
so there is no reason to tell them it's accessing it over and over.
It was also possible for git-annex move to sometimes display it twice,
due to checking if content is present twice. But, the user of move
specifies --from/--to, so it does not need to display when it's
accessing the remote, as the user expects it to access the remote.
git-annex get might display it, but only if the remote also supports
hasKeyCheap, which is really only local git remotes, which didn't
display it always; and in any case nothing displayed it before hasKeyCheap,
which is checked first, so I don't think this needs to display it ever.
mirror is like move. And that's all the main places it would have been
displayed.
This commit was sponsored by Jochen Bartl on Patreon.
2021-04-27 16:50:45 +00:00
|
|
|
checkKey :: HookName -> CheckPresent
|
|
|
|
checkKey h k = do
|
2013-05-21 23:19:03 +00:00
|
|
|
v <- lookupHook h action
|
2014-08-06 17:45:19 +00:00
|
|
|
liftIO $ check v
|
2012-11-11 04:51:07 +00:00
|
|
|
where
|
2014-10-09 18:53:13 +00:00
|
|
|
action = "checkpresent"
|
2019-01-14 17:03:35 +00:00
|
|
|
findkey s = serializeKey k `elem` lines s
|
2016-11-16 01:29:54 +00:00
|
|
|
check Nothing = giveup $ action ++ " hook misconfigured"
|
2012-11-11 04:51:07 +00:00
|
|
|
check (Just hook) = do
|
2014-06-10 23:20:14 +00:00
|
|
|
environ <- hookEnv action k Nothing
|
|
|
|
findkey <$> readProcessEnv "sh" ["-c", hook] environ
|