59b3c1af1d
- add volume up/down, power key - add hall sensor - add sd card support - fix normal boot [ci:skip-build]: already built successfully in CI
404 lines
9.1 KiB
Diff
404 lines
9.1 KiB
Diff
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
|
|
index 39889d5f8..019d7a157 100644
|
|
--- a/arch/arm64/boot/dts/qcom/Makefile
|
|
+++ b/arch/arm64/boot/dts/qcom/Makefile
|
|
@@ -58,6 +58,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-kugo.dtb
|
|
dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-suzu.dtb
|
|
dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb
|
|
dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-101.dtb
|
|
+dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-h815.dtb
|
|
dtb-$(CONFIG_ARCH_QCOM) += msm8992-msft-lumia-octagon-talkman.dtb
|
|
dtb-$(CONFIG_ARCH_QCOM) += msm8992-xiaomi-libra.dtb
|
|
dtb-$(CONFIG_ARCH_QCOM) += msm8994-huawei-angler-rev-101.dtb
|
|
diff --git a/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts b/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
|
|
new file mode 100644
|
|
index 000000000..6767e9be1
|
|
--- /dev/null
|
|
+++ b/arch/arm64/boot/dts/qcom/msm8992-lg-h815.dts
|
|
@@ -0,0 +1,386 @@
|
|
+// SPDX-License-Identifier: GPL-2.0-only
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include "msm8992.dtsi"
|
|
+#include "pm8994.dtsi"
|
|
+#include "pmi8994.dtsi"
|
|
+
|
|
+/delete-node/ &cont_splash_mem;
|
|
+
|
|
+/* disabled downstream */
|
|
+/delete-node/ &dfps_data_mem;
|
|
+
|
|
+/ {
|
|
+ model = "LG G4 (H815)";
|
|
+ compatible = "lg,h815", "qcom,msm8992";
|
|
+ chassis-type = "handset";
|
|
+
|
|
+ /* required for bootloader to select correct board */
|
|
+ qcom,msm-id = <251 0 252 0>;
|
|
+ qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>;
|
|
+ qcom,board-id = <0xb64 0>;
|
|
+
|
|
+ /* psci is broken */
|
|
+ /delete-node/ psci;
|
|
+
|
|
+ chosen {};
|
|
+
|
|
+ gpio-hall-sensor {
|
|
+ compatible = "gpio-keys";
|
|
+
|
|
+ pinctrl-0 = <&hall_sensor_default>;
|
|
+ pinctrl-names = "default";
|
|
+
|
|
+ event-hall-sensor {
|
|
+ gpios = <&tlmm 75 GPIO_ACTIVE_LOW>;
|
|
+ label = "hall effect sensor";
|
|
+ linux,input-type = <EV_SW>;
|
|
+ linux,code = <SW_LID>;
|
|
+ linux,can-disable;
|
|
+ wakeup-source;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ gpio-keys {
|
|
+ compatible = "gpio-keys";
|
|
+ autorepeat;
|
|
+
|
|
+ key-vol-up {
|
|
+ label = "volume up";
|
|
+ gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
|
|
+ linux,code = <KEY_VOLUMEUP>;
|
|
+ wakeup-source;
|
|
+ debounce-interval = <15>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ reserved-memory {
|
|
+ #address-cells = <2>;
|
|
+ #size-cells = <2>;
|
|
+ ranges;
|
|
+
|
|
+ ramoops@ff00000 {
|
|
+ compatible = "ramoops";
|
|
+ reg = <0x0 0xff00000 0x0 0x100000>;
|
|
+ console-size = <0x20000>;
|
|
+ pmsg-size = <0x20000>;
|
|
+ record-size = <0x10000>;
|
|
+ ecc-size = <0x10>;
|
|
+ };
|
|
+
|
|
+ cont_splash_mem: fb@3400000 {
|
|
+ compatible = "framebuffer";
|
|
+ reg = <0 0x3400000 0 0xc00000>;
|
|
+ no-map;
|
|
+ };
|
|
+
|
|
+ crash_fb_mem: crash_fb@4000000 {
|
|
+ reg = <0 0x4000000 0 0xc00000>;
|
|
+ no-map;
|
|
+ };
|
|
+ };
|
|
+};
|
|
+
|
|
+&pm8994_spmi_regulators {
|
|
+ vdd_s8-supply = <&vph_pwr>;
|
|
+ vdd_s11-supply = <&vph_pwr>;
|
|
+
|
|
+ pm8994_s8: s8 {
|
|
+ regulator-min-microvolt = <700000>;
|
|
+ regulator-max-microvolt = <1180000>;
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ };
|
|
+
|
|
+ pm8994_s11: s11 {
|
|
+ regulator-min-microvolt = <700000>;
|
|
+ regulator-max-microvolt = <1225000>;
|
|
+ regulator-always-on;
|
|
+ regulator-boot-on;
|
|
+ };
|
|
+};
|
|
+
|
|
+&rpm_requests {
|
|
+ pmi8994_regulators: pmi8994-regulators {
|
|
+ compatible = "qcom,rpm-pmi8994-regulators";
|
|
+
|
|
+ vdd_s1-supply = <&vph_pwr>;
|
|
+ vdd_bst_byp-supply = <&vph_pwr>;
|
|
+
|
|
+ pmi8994_s1: s1 {
|
|
+ regulator-min-microvolt = <1025000>;
|
|
+ regulator-max-microvolt = <1025000>;
|
|
+ };
|
|
+
|
|
+ /* S2 & S3 - VDD_GFX */
|
|
+
|
|
+ pmi8994_bby: boost-bypass {
|
|
+ regulator-min-microvolt = <3150000>;
|
|
+ regulator-max-microvolt = <3600000>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ pm8994_regulators: pm8994-regulators {
|
|
+ compatible = "qcom,rpm-pm8994-regulators";
|
|
+
|
|
+ vdd_s3-supply = <&vph_pwr>;
|
|
+ vdd_s4-supply = <&vph_pwr>;
|
|
+ vdd_s5-supply = <&vph_pwr>;
|
|
+ vdd_s7-supply = <&vph_pwr>;
|
|
+ vdd_l1-supply = <&pmi8994_s1>;
|
|
+ vdd_l2_26_28-supply = <&pm8994_s3>;
|
|
+ vdd_l3_11-supply = <&pm8994_s3>;
|
|
+ vdd_l4_27_31-supply = <&pm8994_s3>;
|
|
+ vdd_l5_7-supply = <&pm8994_s5>;
|
|
+ vdd_l6_12_32-supply = <&pm8994_s5>;
|
|
+ vdd_l8_16_30-supply = <&vph_pwr>;
|
|
+ vdd_l9_10_18_22-supply = <&pmi8994_bby>;
|
|
+ vdd_l13_19_23_24-supply = <&pmi8994_bby>;
|
|
+ vdd_l14_15-supply = <&pm8994_s5>;
|
|
+ vdd_l17_29-supply = <&pmi8994_bby>;
|
|
+ vdd_l20_21-supply = <&pmi8994_bby>;
|
|
+ vdd_l25-supply = <&pm8994_s5>;
|
|
+ vdd_lvs1_2 = <&pm8994_s4>;
|
|
+
|
|
+ pm8994_s3: s3 {
|
|
+ regulator-min-microvolt = <1300000>;
|
|
+ regulator-max-microvolt = <1300000>;
|
|
+ };
|
|
+
|
|
+ /* sdhc1 vqmmc and bcm */
|
|
+ pm8994_s4: s4 {
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-system-load = <325000>;
|
|
+ regulator-allow-set-load;
|
|
+ };
|
|
+
|
|
+ pm8994_s5: s5 {
|
|
+ regulator-min-microvolt = <2150000>;
|
|
+ regulator-max-microvolt = <2150000>;
|
|
+ };
|
|
+
|
|
+ pm8994_s7: s7 {
|
|
+ regulator-min-microvolt = <1000000>;
|
|
+ regulator-max-microvolt = <1000000>;
|
|
+ };
|
|
+
|
|
+ pm8994_l1: l1 {
|
|
+ regulator-min-microvolt = <1000000>;
|
|
+ regulator-max-microvolt = <1000000>;
|
|
+ };
|
|
+
|
|
+ pm8994_l2: l2 {
|
|
+ regulator-min-microvolt = <1250000>;
|
|
+ regulator-max-microvolt = <1250000>;
|
|
+ regulator-system-load = <10000>;
|
|
+ regulator-allow-set-load;
|
|
+ };
|
|
+
|
|
+ /* camera */
|
|
+ pm8994_l3: l3 {
|
|
+ regulator-min-microvolt = <1050000>;
|
|
+ regulator-max-microvolt = <1050000>;
|
|
+ };
|
|
+
|
|
+ pm8994_l4: l4 {
|
|
+ regulator-min-microvolt = <1225000>;
|
|
+ regulator-max-microvolt = <1225000>;
|
|
+ };
|
|
+
|
|
+ /* L5 is inaccessible from RPM */
|
|
+
|
|
+ pm8994_l6: l6 {
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ };
|
|
+
|
|
+ /* L7 is inaccessible from RPM */
|
|
+
|
|
+ pm8994_l8: l8 {
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ };
|
|
+
|
|
+ pm8994_l9: l9 {
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ };
|
|
+
|
|
+ /* touch */
|
|
+ pm8994_l10: l10 {
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ };
|
|
+
|
|
+ pm8994_l11: l11 {
|
|
+ regulator-min-microvolt = <1200000>;
|
|
+ regulator-max-microvolt = <1200000>;
|
|
+ };
|
|
+
|
|
+ pm8994_l12: l12 {
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ regulator-system-load = <10000>;
|
|
+ regulator-allow-set-load;
|
|
+ };
|
|
+
|
|
+ /* sdhc2 vqmmc */
|
|
+ pm8994_l13: l13 {
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <2950000>;
|
|
+ regulator-system-load = <22000>;
|
|
+ regulator-allow-set-load;
|
|
+ };
|
|
+
|
|
+ /* camera */
|
|
+ pm8994_l14: l14 {
|
|
+ regulator-min-microvolt = <1200000>;
|
|
+ regulator-max-microvolt = <1200000>;
|
|
+ regulator-system-load = <10000>;
|
|
+ regulator-allow-set-load;
|
|
+ };
|
|
+
|
|
+ pm8994_l15: l15 {
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ };
|
|
+
|
|
+ pm8994_l16: l16 {
|
|
+ regulator-min-microvolt = <2700000>;
|
|
+ regulator-max-microvolt = <2700000>;
|
|
+ };
|
|
+
|
|
+ /* camera */
|
|
+ pm8994_l17: l17 {
|
|
+ regulator-min-microvolt = <2800000>;
|
|
+ regulator-max-microvolt = <2800000>;
|
|
+ };
|
|
+
|
|
+ pm8994_l18: l18 {
|
|
+ regulator-min-microvolt = <2850000>;
|
|
+ regulator-max-microvolt = <2850000>;
|
|
+ };
|
|
+
|
|
+ /* LCD */
|
|
+ pm8994_l19: l19 {
|
|
+ regulator-min-microvolt = <3000000>;
|
|
+ regulator-max-microvolt = <3000000>;
|
|
+ };
|
|
+
|
|
+ /* sdhc1 vmmc */
|
|
+ pm8994_l20: l20 {
|
|
+ regulator-min-microvolt = <2950000>;
|
|
+ regulator-max-microvolt = <2950000>;
|
|
+ regulator-system-load = <570000>;
|
|
+ regulator-allow-set-load;
|
|
+ };
|
|
+
|
|
+ /* sdhc2 vmmc */
|
|
+ pm8994_l21: l21 {
|
|
+ regulator-min-microvolt = <2950000>;
|
|
+ regulator-max-microvolt = <2950000>;
|
|
+ regulator-system-load = <800000>;
|
|
+ regulator-allow-set-load;
|
|
+ };
|
|
+
|
|
+ /* touch */
|
|
+ pm8994_l22: l22 {
|
|
+ regulator-min-microvolt = <3000000>;
|
|
+ regulator-max-microvolt = <3000000>;
|
|
+ };
|
|
+
|
|
+ /* camera */
|
|
+ pm8994_l23: l23 {
|
|
+ regulator-min-microvolt = <2800000>;
|
|
+ regulator-max-microvolt = <2800000>;
|
|
+ };
|
|
+
|
|
+ pm8994_l24: l24 {
|
|
+ regulator-min-microvolt = <3075000>;
|
|
+ regulator-max-microvolt = <3150000>;
|
|
+ };
|
|
+
|
|
+ /* IRRC */
|
|
+ pm8994_l25: l25 {
|
|
+ regulator-min-microvolt = <1000000>;
|
|
+ regulator-max-microvolt = <1000000>;
|
|
+ };
|
|
+
|
|
+ pm8994_l26: l26 {
|
|
+ regulator-min-microvolt = <987500>;
|
|
+ regulator-max-microvolt = <987500>;
|
|
+ };
|
|
+
|
|
+ /* hdmi */
|
|
+ pm8994_l27: l27 {
|
|
+ regulator-min-microvolt = <1000000>;
|
|
+ regulator-max-microvolt = <1000000>;
|
|
+ };
|
|
+
|
|
+ pm8994_l28: l28 {
|
|
+ regulator-min-microvolt = <1000000>;
|
|
+ regulator-max-microvolt = <1000000>;
|
|
+ regulator-system-load = <10000>;
|
|
+ regulator-allow-set-load;
|
|
+ };
|
|
+
|
|
+ /* camera */
|
|
+ pm8994_l29: l29 {
|
|
+ regulator-min-microvolt = <2800000>;
|
|
+ regulator-max-microvolt = <2800000>;
|
|
+ };
|
|
+
|
|
+ /* camera */
|
|
+ pm8994_l30: l30 {
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ };
|
|
+
|
|
+ pm8994_l31: l31 {
|
|
+ regulator-min-microvolt = <1262500>;
|
|
+ regulator-max-microvolt = <1262500>;
|
|
+ };
|
|
+
|
|
+ pm8994_l32: l32 {
|
|
+ regulator-min-microvolt = <1800000>;
|
|
+ regulator-max-microvolt = <1800000>;
|
|
+ };
|
|
+
|
|
+ pm8994_lvs1: lvs1 {};
|
|
+
|
|
+ pm8994_lvs2: lvs2 {};
|
|
+ };
|
|
+};
|
|
+
|
|
+&pm8994_pon {
|
|
+ resin {
|
|
+ status = "okay";
|
|
+ linux,code = <KEY_VOLUMEDOWN>;
|
|
+ };
|
|
+};
|
|
+
|
|
+&tlmm {
|
|
+ hall_sensor_default: hall-sensor-default-state {
|
|
+ pins = "gpio75";
|
|
+ function = "gpio";
|
|
+ drive-strength = <2>;
|
|
+ bias-pull-up;
|
|
+ };
|
|
+};
|
|
+
|
|
+&sdhc1 {
|
|
+ status = "okay";
|
|
+ mmc-hs400-1_8v;
|
|
+ vmmc-supply = <&pm8994_l20>;
|
|
+ vqmmc-supply = <&pm8994_s4>;
|
|
+ non-removable;
|
|
+};
|
|
+
|
|
+&sdhc2 {
|
|
+ status = "okay";
|
|
+ vmmc-supply = <&pm8994_l21>;
|
|
+ vqmmc-supply = <&pm8994_l13>;
|
|
+ cd-gpios = <&pm8994_gpios 8 GPIO_ACTIVE_LOW>;
|
|
+};
|