This charset is the default and the recommended value, since boot fat
partitions should be case insensitive. linux-lts and linux-edge in
alpine use "utf-8", that might change, but add the options regardless,
so we can be safe
Fixes https://gitlab.com/postmarketOS/pmaports/-/issues/2782
The SSH agent built into gnome-keyring has been disabled by default
in version 46, and replaced by the SSH agent implementation in gcr.
Install the new implementation to provide a graphical SSH agent
for all GNOME-based UIs.
Follow-up to aports!63893, which fixes this upstream and adds this
dependency to the upstream gnome package.
Fixes#2728.
[ci:skip-build]: already built successfully in CI
So that we can warranty that any of the packages is installed by
default. In addition, make sure that pipewire-pulse can never be
installed together with
postmarketos-base-ui-audio-pulseaudio. pipewire-pulse provides
pulseaudio, so installations that have pipewire-pulse already
installed would end up in a very weird position otherwise.
Fixes 87d355e08d
[ci:skip-build]: already built successfully in CI
These are increasingly needed for camera and screen sharing/recording
tasks. To make the development easier and future-proof, install them
by default. They can now be removed from the audio subpackage
Fixes#2785
These are useful on desktops/laptops/tablets.
This was only added to the gnome (desktop) UI because:
1) The system monitor could be useful on mobile devices however the UI
is not adaptive.
2) Disk utility isn't that useful on mobile devices since it tends to
show dozens of partitions on android phones, and so it's kinda
confusing and it would be easy for users to mess things up.
[ci:skip-build]: already built successfully in CI
90b0205a ("postmarketos-ui-i3wm: configure wallpaper globally") directly copies
the default i3 config into the user's config directory. Change to using the
wizard instead
After removing the following files, $pkgdir/usr/share/deviceinfo is empty:
- $pkgdir/usr/share/deviceinfo/$pkgname
- $pkgdir/usr/share/deviceinfo/deviceinfo
Remove it when it's empty.
[ci:skip-build]: already built successfully in CI
Features:
- Include "sort-key" in bootloader spec config (MR 58)
- Integrate pmos-update-depthcharge-kernel and pmos-update kernel
logic (MR 55)
[ci:skip-build] already built successfully in CI
Apparently f2fs has a soft dependency on this driver, so if it's =m in
the kernel then let's make sure it's always in the initramfs since f2fs
is a supported filesystem.
Fixes https://gitlab.com/postmarketOS/pmaports/-/issues/2711
[ci:skip-build]: already built successfully in CI
This subpackage now installs a file that was previously in the other
subpackage it is meant to replace, leading to upgrade conflicts that
have to be manually resolved (i.e. with apk fix)
Fixes: 126f43220 and 1712a2d03
* Bring back /usr/share/wallpapers/postmarketos.jpg, which is used in at
least as the default in sway, mate, lxqt, xfce4
* Move postmarketos-gnome.xml here (instead of taking the version from
artwork.git), because the paths mentioned in the xml file are also set
in this package in pmaports. This makes it easier to maintain.
* Fix the paths in postmarketos-gnome.xml (postmarketos vs
postmarketOS).
* Keep the postmarketos-gnome.xml name, as we had it before recent
wallpaper changes, and as it is the same name in v23.12 still. This
should make it backwards compatible for people upgrading from v23.12.
* Move 10_pmOS-wallpaper.gschema.override here for the same reason.
Fixes: 72357ecf ("main/postmarketos-artwork: upgrade to Meadow wallpaper and make Plasma-compatible (MR 4805)")
[ci:skip-build]: already built successfully in CI
Remove the postmarketos-base-ui-gnome-wallpapers subpackage that only
Phosh and GNOME desktop used to depend on, and instead add a hard
dependency on postmarketos-artwork-wallpapers.
The config that enables the wallpapers will be moved to
postmarketos-artwork-wallpapers in the next commit. This will make it
easier to maintain, the paths to the wallpapers will only be in one
package instead of being scattered across many.
Fix that no wallpaper was set for sway:
[ERROR] [sway/config/output.c:828] failed to execute 'swaybg' (background configuration probably not applied): No such file or directory
The current invocation doesn't work:
$ busybox dc "100" "5" / p
dc: can't open '100': No such file or directory
Fix it so that it does:
$ busybox dc -e "100 5 / p"
20
One of the messages that is printed on failure was missing
the "WARNING:" prefix. Address that too.
Signed-off-by: Andrea Bolognani <eof@kiyuko.org>
How to boot from USB drives:
1. Make sure the extcon has OTG support and included in initramfs
2. Make sure the PMIC supports the power to OTG devices, and included in initramfs. Otherwise, a hub with external power supply is required.
3. Make sure module `usb-storage` is enabled in initramfs
4. `pmbootstrap install --sdcard=/dev/<usb_drive>`
- postmarketOS/pmbootstrap@942ee20789 is required to ignore sdcard check. Thanks @ollieparanoid for the patch.
5. `pmbootstrap flasher flash_kernel`
6. Insert the USB drive to OTG and boot
[ci:skip-build]: already built successfully in CI
The postmarketos-artwork-wallpapers-gnome package no longer exists. Now
we just depend on the postmarketos-artwork-wallpapers package.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Only temporarilly. This is in pmb_recommends, so does not need pkgver
bump. We can swap them back once it's built for armv7 in alpine, but
it's now blocking all MRs from merging.
[ci:skip-vercheck]
Reading the `ifname` of a gadget that has not been configured with a UDC
succeeds with the content `(unnamed net_device)` instead of failing.
So we need to explicitly check that a UDC was configured before we read
the interface name.
Ref: #2648
[ci:skip-build]: already built successfully in CI
Reading the `ifname` of a gadget that has not been configured with a UDC
succeeds with the content `(unnamed net_device)` instead of failing.
So we need to explicitly check that a UDC was configured before we read
the interface name.
Ref: #2648
Sometimes, there can be more than 10M of stuff collected for logging,
which breaks things.. bump the size to 32M which should still be small
enough for low end / old devices.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
A bunch of override files in postmarketos-base-ui-plasma seem to have come from the plasma-mobile ui package, which probably shouldn't be on desktop and bigscreen.
With Plasma 6, a lot of the overrides are now no longer necessary for Plasma Mobile.
Situation with each file:
- 000-gschema.override - This likely was for changing maliit themes and GTK title bar layout for Plasma Mobile, maliit theming was dropped (https://github.com/maliit/keyboard/pull/108), and title bar layout is now handled within Plasma Mobile
- kdeglobals - This was for setting the look-and-feel on Plasma Mobile and default browser, it's now handled within Plasma Mobile envmanager
- kwinrc - These were settings for disabling window decorations and setting the vkbd to maliit, which is now handled in Plasma Mobile envmanager
- kscreenlockerrc - This is to autolock the screen after login (tinydm autologs in), the file was for Plasma Mobile, I don't think we want it for Desktop since SDDM is used there
Drop duplicated dependencies, which have been already included
in postmarketos-base-ui-plasma:
- dnsmasq
- elogind
- elogind-openrc
- polkit-kde-agent-1
[ci:skip-build]: already built successfully in CI
All of Plasma Bigscreen was removed from aports[1]. It will return with
KDE 6.1, according to PureTryOut. But for now, disable this package by
making it build on no architectures so that CI works again.
[1]: 4e7fa26ea2
[ci:skip-vercheck]: Version does not need to change when changin arches.
This reverts commit 518e62df34
"main/postmarketos-base-ui: add tinydm subpackage to pull in xinit (MR 4814)"
aports/tinydm now provides its own -x11 subpackage to do this since
7df6d02609
/dev/pmsg0 may be created by pstore driver. When it is available,
write logs into it so logs can be recovered through pstore after
a failed boot. This is useful for devices without console or hard
to get console.
Crappy workaround, it's better than having DNS broken...
See: https://gitlab.com/postmarketOS/pmaports/-/issues/2601
Also removed it from shellcheck, because SC doesn't like all of the
unused/unreachable things after the `exit 0`. This commit should be
reverted when the issue is actually fixed later...
[ci:skip-build] already built successfully in CI
tinydm uses startx for Xorg UIs, which is provided by the xinit package.
The xinit package used to be pulled in automatically by
the xorg-server package, but this stopped being the case with
1fd2d70696
this allows to opt-out of usb-tethering on pmOS devices with
`apk add !postmarketos-base-ui-networkmanager-usb-tethering`
this is useful for developers with laptops on pmOS / dailydriving
those laptops on pmOS.
[ci:skip-build]: Already built successfully in CI.
These apps are useful to have on the full GNOME desktop too, and this
removes the need to duplicate package lists across UI meta packages that
depend on the base gnome UI package.
Some devices take time to initialize storage, e.g. Qualcomm laptops
using ADSP need to load firmware firstly, and initramfs script does
not always manage to mount boot partition in time.
Unfortunately, there is no reliable way to reproduce the issue, but
this patch should fix cases like this.
