* XFCE4/Hildon: Log to syslog, see also:
<https://github.com/postmarketOS/pmbootstrap/pull/762>
* Fix XFCE4 didn't start in qemu-amd64, because it required
libEGL.so.1, which is provided by mesa-egl. This is a dependency
of device-qemu-amd64-x11 now. (It worked for Hildon and Weston,
because they pull mesa-egl in with other packages.)
This causes initramfs to skip calling 'kpartx' when pmOS has been
installed on an external disk (e.g. sdcard). Fixes mounting pmOS_boot
by label (#774).
@drebrez deserves much credit for this one for all the testing,
bisecting and for fixing everything. Thank you very much!
---
* devices which need a custom weston.ini ship it with a install_if
subpackage, so it only gets installed when weston is installed. This
sounds complicated, but is actually pretty clean in the APKBUILD.
* postmarketos-ui-weston: has a weston.ini.default, which enables
xwayland and uses fbdev as backend (because that's what most
devices use!). It defaults to the weston.ini.default if there is no
weston.ini (as installed by the device package).
* changed spaces to tabs for consistency, general minor refactoring of
device-APKBUILDs
Placing such files in /tmp/ is an unnecessary attack vector, as
@pavelmachek showed. All udev rules, which mentioned /tmp/weston.log
do not contain any path anymore.
Logs can be read with:
logread -f /var/log/messages | grep weston
See also: <https://wiki.alpinelinux.org/wiki/Syslog>
This way we could give the user a rough idea what will be installed,
and also use this to display a short warning about long compile times
(e.g. until the plasma mobile stuff is upstreamed).
* Allow to specify a custom username in "pmbootstrap init"
* Build chroots have "pmos" instead of "user" as username now
* Installation user UID is 1000 now (as in all other Linux distributions)
* Adjust autologins
* postmarketos-base: enable wheel group for sudo, removed previous sudoers file
* Implement safe upgrade path:
We save the version of the work folder format now, in $WORK/version.
When this file does not exist, it defaults to 0.
In case it does not match the currently required version
(pmb.config.work_version), then ask the user if it should
automatically be upgraded.
* apkindex:
* Also parse the architecture field
* symlink_noarch_package:
* Renamed to symlink_noarch_packages
* Always work on all packages (so we don't need to guess which
subpackages have been generated after a certain build)
* Get invoked when running 'pmbootstrap index'
* Use 'apk index' to generate one index, where the architecture
does not get rewritten (abuild does that by default, due to
Alpine's repos not having a 'noarch' folder and diverging from
that doesn't make things easier for us). That goes super fast,
and then we know which packages are noarch packages and can
create the symlinks.
* Made output less verbose:
* Use -q for 'apk index' when calling it directly (when it gets
called by abuild we can't control that)
* Output that the APKINDEXes get reindexed only to the 'pmbootstrap
log'.
kmscube is a command line utility for testing KMS-capable GPU drivers,
which may be useful for validating DRM rendering and OpenGL ES acceleration
capabilities required by accelerated Weston/KWin on supported devices.
This removes a few globs from the mkinitramfs module copy part. This is an issue
in linux-postmarketos since it will copy gpu drivers for all possible hardware to the
initramfs.
This should be done in the deviceinfo variables for the modules instead and is
already done for the current devices that use module loading. This changes the
initramfs (uncompressed) from 16 MB to 11 MB just because the qemu graphics
drivers aren't included.
So I was wrong.. /etc/issue needs to contain the escape sequence output
by setterm, not the actual call to setterm itself. My previous testing
of this was faulty, which led me to believe the previous implementation
of this would work.
* aports: unicsy-demo: pure Python program should have noarch set
Per https://wiki.alpinelinux.org/wiki/APKBUILD_examples:Python#arch,
pure Python programs should be marked as noarch in the APKBUILD instead
of all.
* aports: sdl_net: fix build on aarch64
The version of config.guess and config.sub predate aarch64, so
./configure errors out with instructions to update them.
Add a prepare section in APKBUILD to do this.
* aports: sdl_net+chocolate-doom: pass CHOST and CBUILD to configure
Other Alpine packages pass these options in to aid cross compling; for
example, the template APKBUILD from
https://github.com/alpinelinux/abuild/blob/master/newapkbuild.in#L43
uses them. Add them to chocolate-doom and sdl_net.
This enables console screen blanking/powersaving by default. Without it, the screen will stay on indefinitely, killing battery life and/or prolonging charge time. UIs should be able to override this with dpms (e.g. xset). I arbitrarily chose 5 min as the blank time.
* postmarketos-base: Execute setup-udev, remove mosh from dependencies
* Run setup-udev [0], because that is what `setup-xorg-base` does [1].
It configures more than one OpenRC service and it also messes with the
runlevels. Only after running that, Hildon works (tested in Qemu).
[0]: 2fbea8b8da/main/eudev/setup-udev
[1]: 06300dd483/setup-xorg-base.in (L25)
* Remove `mosh` from `postmarketos-base` dependencies. I don't think anyone
uses it right now, and it's easy to add custom packages in `pmbootstrap init`
nowadays.
* Minor style changes in the `APKBUILD`
* [rx51] Remove udev-trigger service start
* pmb.helpers.run: support running processes in background
* enable QXL driver support in the linux kernel configurations so
that we can also use SPICE to connect to the VM.
QXL is a paravirtual graphics driver with 2D support
The SPICE project aims to provide a complete open source solution for remote
access to virtual machines in a seamless way.
Both DRM_QXL and DRM_BOCHS are enabled as modules.
According to [1], on Linux guests, the qxl and bochs_drm kernel modules
must be loaded in order to gain a decent performance
* qemu: add new option --spice to connect to VM using a SPICE client
If specified, 'pmbootstrap qemu' will look for some SPICE client in the
user's PATH and run qemu using the QXL driver.
Currently supported spice clients are 'spicy' and 'remote-viewer' but
adding support for more clients can be easily done.
qemu with qxl support will run on port 8077/tcp, which doesn't belong to
any well-known service and represents 'PM' in decimal.
References:
[0] https://www.linux-kvm.org/page/SPICE
[1] https://wiki.archlinux.org/index.php/QEMU#qxl
[2] https://wiki.archlinux.org/index.php/QEMU#SPICE
[3] https://github.com/postmarketOS/pmbootstrap/issues/453 (partially fixed)
Quite a few things use dbus (plasma, hildon, ofono, connman,
networkmanager, etc) that I think it makes sense to just have this
started by default in pmOS rather than have every device package
implement this on their own.
In case someone shows up with a use-case, where dbus by default
is not desired, please speak up. Possible solutions are in #628.
'install' does not properly handle symlinks, it copies the entire file
instead of a symlink to it. This PR uses `cp -a` to preserve symlinks.
For example, with `install`, the files libc.musl-armhf.so.1 and
ld-musl-armhf.so.1 are the same size, despite the fact that in rootfs
libc.musl-armhf.so.1 is actually a symlink to ld-musl-armhf.so.1.
According to @drebrez research, the initramfs size shrunk from
1 567 930 to 1 168 591.
This adds a custom swap file service, which allows specifying a
recommended swap size in the deviceinfo file via
`deviceinfo_swap_size_recommended`. For the N900 this defaults
to 1024 MB now. As the swap file is created in the root partition,
we have encrypted swap now (unless encryption is disabled with
`--no-fde`).
* Check kernel config
* Allow specifying multiple kernel packages, and also no packages
which defaults to scanning all kernel configs (it is super fast
anyway)
* Add the check to Travis CI
* Adjust existing kernel configs, so they pass the kconfig_check.
(We've had to put in a lot of defaults in the aarch64
linux-postmarketos configs, that's why the diff is a bit unclean.)
* Increase modified kernel pkgrels
* Add msm-fb-refresher package and initfs config
* Bump version for pmos-mkinitfs
* Create msm-fb-refresher openrc service
* kill refresher when initfs is done
* weston: upgrade to 3.0.0
* removed no_0hz_refresh_rate patch, as this is upstreamed now
* fix regression in compositor-fbdev
* weston: compile with weston-launch enabled
The following patch is required in order to replace GNU's error()
https://lists.freedesktop.org/archives/wayland-devel/2016-September/031179.html
When modules are surrounded with quotes, modprobe seems to be treating
them as all one module and none of them are actually loaded.
On the N900, where a watchdog module MUST be loaded on boot, this
results in the device shutting down after 30 seconds. This commit
corrects this in init.sh.in
The sdl2 package is forked from upstream Alpine and:
1) adds directfb video support
2) adds a patch to work around a compile issue when directfb is enabled
This commit disables root autologin for postmarketos-base and enabled
root autologin for postmarketos-ui-weston (since weston-launcher is not
built, weston can only be run by root).
* Initial Mozilla Flame packages
* Update dtbtool to use LineageOS upstream
* Use mkbootimg --dt flag only when deviceinfo_bootimg_qcdt is defined
* Update mkbootimg to use LineageOS upstream
* Add sparse image flashing on device-mozilla-flame
* Only support SD card install on Mozilla Flame
* Remove useless profile.sh on mozilla flame
* Package DTBs in /usr/lib/linux-mozilla-flame/
* Build and install modules in linux-mozilla-flame
* Partially resolve#338: Configfs network setup was broken
* Ignore shellcheck warning
...because if we do what shellcheck recommends here, we end up with
exactly the code which we're reverting in this PR.
Thanks to Pablo Castellano and Martijn Braam!
In postmarketOS we are now able to generate system images with the
correct configuration so that they can boot already using qemu
This commit brings the `pmbootstrap qemu` action.
This command is very handy because you don't have to set all the
qemu parameters, pmbootstrap does it for you.
* device-qemu-vexpress: Added kernel command line according to wiki
* qemu: Added workaround for image writing permissions
* qemu: Added support to launch postmarketOS in a QEMU virtual machine
- Support for emulating these architectures in QEMU: arm, aarch64, x86_84
- Generate QEMU command correctly depending no guest architecture (arm/x86)
- Run QEMU in the same architecture as the host by default
- Refactoring in pmb.parse.arch and pmb.qemu.run
- Raise exception if DTB file or system image are not present
- Display more useful information when something fails (e.g. image not found)
- Run qemu version depending on arch (host or argument), not device configured
* device-qemu-amd64: set deviceinfo_kernel_cmdline to "PMOS_NO_OUTPUT_REDIRECT"
* qemu: added --memory argument to specific guest RAM
* device-qemu-amd64: adjusted deviceinfo_kernel_cmdline (console=tty1)
* Added /etc/network/interfaces for qemu-amd64
* qemu: Added KVM support if /dev/kvm if present
* Specify separate machines for architecture
* qemu: Check if QEMU is installed instead of crashing
* Added graphics driver to qemu-aarch64
- Use arm (as used in qemu) instead of armhf (used in Alpine)
- qemu argument is -dtb
- Follow same style to build the command + arguments
* qemu: Added SSH port redirection: ./pmbootstrap.py qemu -p 2222
* Automatically compute the minimum size for the partitions
* Automatically resize the pmOS_root partition during the boot process
* Resize root partition only if there is unallocated space at the end of the device.
* Added more echos to make debugging easier while looking at the pmOS_init.log.
* Updated static_code_analysis.sh script to run shellcheck with `-x` option.
* Packaged libsparse
libsparse from the Android project provides multiple tools like img2simg
and simg2img.
These are used to split a large image for the system partition into
separate smaller chunks with sparse headers
This is required for several devices (at least bullhead, fp2 and titan)
because it fixes the "Invalid sparse file format at header magi" error
https://github.com/postmarketOS/pmbootstrap/issues/299
* Added new variable deviceinfo_flash_sparse (fixes#299)
Right after the system image is generated, pmbootstrap checks this
variable. In case it is true, run img2simg on it
* motorola-titan: enable deviceinfo_flash_sparse
* libsparse: use source from github: anestisb/android-simg2img
It is not that easy to use the upstream archive because everytime
you download it, the files have the current date as creation date
and that makes the file have a different checksum every download
https://github.com/postmarketOS/pmbootstrap/pull/303#issuecomment-319017197
Per the APKBUILD reference, , package *-install scripts should be checksummed to guard against incomplete/corrupt downloads. The postmarketos-base package is one example where this is not being implemented currently.
Having it in boot doesn't actually work, the service is being started
too early and fails. This change moves it to the default runlevel. This
change also removes "wifi-handler" since that service doesn't actually
exist.
This updates the linux-postmarketos kernel to 4.12.4, and fixes an issue
where the APKBUILD was pulling down the 4.12 source but not the 4.12.x
patches. I think that pulling down the major.minor source and a sep.
package for patches to update to the major.minor.minor(er?) release adds
unnecessary complexity since kernel.org already hosts the sources with
these patches applied (e.g. in this case the 4.12.4 source)
