The following commits will reintroduce it with its appropriate codename
and split it into a separet package for downstream, and separate ones
for the 3G version and the LTE version.
Improvements from xfce4-phone source:
- Add screenshot to README.md
- Enable screen locking
- Disable Desktop icons "Home", "File System", "Trash"
- Enable single-click on Desktop
- Enable single-click in Thunar
- Change clock format
- Set postmarketos wallpaper
Additional changes in postmarketos-ui-xfce4:
- Installing greybird-themes (which is already set as default theme in
/etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xsettings.xml).
- Changing /etc/skel/.config/autostart/onboard-autostart.desktop to
slightly speed up keysboard startup (overriding startup-delay of
/etc/xdg/autostart/onboard-autostart.desktop).
- Enabling scrollbars by /etc/profile.d/enable-scrollbars.sh, this is
helpful where touch-scrolling doesn't work like e.g. in whiskermenu.
(And re-ordered network-manager-applet in APKBUILD _pmb_recommends
section.)
Also removing xfce4 subpackages of device-qemu-amd64,
device-qemu-aarch64 and device-nokia-n900. The device specific monitor
to set the wallpaper will now be automatically derived from "monitor0"
in file xfce4-desktop.xml.
Additionally taking maintainership as discussed in merge request
(!2506).
Update deviceinfo to set deviceinfo_bootimg_qcdt to false. This is causing the pmbootstrap install to fail with
==> initramfs: creating boot.img
ERROR: File not found: /boot/dt.img, but
'deviceinfo_bootimg_qcdt' is set. Please verify that your
device is a QCDT device by analyzing the boot.img file
(e.g. 'pmbootstrap bootimg_analyze path/to/twrp.img')
and based on that, set the deviceinfo variable to false or
adjust your linux APKBUILD to properly generate the dt.img
I downloaded the TWRP image for sirius from https://forum.xda-developers.com/t/recovery-unofficial-twrp-3-2-3-0-for-sirius-01-09-2018.3836837/
Then ran "pmbootstrap bootimg_analyze recovery.img". The output had ' deviceinfo_bootimg_qcdt="false" '. This is my justification for the fork
msm-firmware-loader is pretty similar to klte's modem-firmware-mount
except that it sets up the symlinks dynamically. The nice thing about
it is that it seems to just work. :)
[ci:ignore-count]
Right now we have multiple variants of A5 that are only different in
secure-boot keys and as such different firmware blobs.
Use msm-firmware-loader to support all A5 variants with a single device
port. Because of that, drop lte suffix as there are 3g variants as well.
Right now we have multiple variants of A3 that are only different in
secure-boot keys and as such different firmware blobs.
Use msm-firmware-loader to support all A3 variants with a single device
port. Because of that, drop lte suffix as there are 3g variants as well.
With the new msm8916-mainline kernel DT for gt510wifi is reworked to be
reused with gt58 devices. While at it, the DT was generalized to be used
with the LTE variants of the device as well as the wifi variant.
Change base dtb name to the new common dt and add an LTE-specific dt
that enavles the modem. Since variants have different secure-boot keys,
use msm-firmware-loader for that.
Also make various updates to support gpu-accelerated UI's and FDE.
Currently we see this error in our dmesg:
udevd[764]: invalid key/value pair in file /etc/udev/rules.d/90-android-touch-dev.rules on line 6, starting at character 102 ('\\')
[ci:skip-build] Already built successfully on CI
The best (only) theory so far is that issues occur if the battery is
deeply discharged. The latest kernel upgrade fixed both charging and
reported state-of-charge, so hopefully no one will have similar issues
from now on.
Add pmb:cross-native/!tracedeps to applicable firmware packages and
secure both with a test.
This sets the pmb:cross-native and !tracedeps options on all firmware-*
packages that are compatible with the native compilation method. A unit
test ensures the presence of both options while maintaining a list of
exempted packages.
Fixes: #718
[ci:ignore-count] [ci:skip-vercheck] [ci:skip-build]
Starting with Linux 5.14, the modem can be controlled through the new
WWAN subsystem in Linux with the WWAN RPMSG CTRL driver. This is also
supported in ModemManager 1.18 and the pmOS fork of oFono.
Drop the udev rules for the previous approach through the RPMSG chardev
since this causes the modem to be detected twice by ModemManager and oFono.
- mesa-dri-freedreno => mesa-dri-gallium
- msm-modem-rpmsg => msm-modem
- add swclock-offset
- sort deps list
- remove ofono from deps, should be pulled in by UI
package that needs it, not by device- package
This fixes some parameters needed for Xiaomi Mi 5 to boot on newer kernels, and adds some extra flags for GPU acceleration and USB labels.
Signed-off-by: Raffaele Tranquillini <raffaele.tranquillini@gmail.com>
[ci:skip-build]
For some reason it was disabled for this device, and only for this
device. Enable it again so we have it for all devices. It passes fine
anyway.
[ci:skip-build] [ci:skip-vercheck]
Use -f, so rm
* does not complain if the file does not exist
* does not exit with 1 if the file does not exist
Remove the stdout/stderr redirect (not needed with -f).
Add exit 0 at the end of the file, even though it clearly should not
exit with anything other than 0 anymore, as it's common practice in
these pre-upgrade etc. scripts.
With the old script, the problem was that it would exit 1 as soon as the
files did not exist at the time the script runs. Exit 1 in this
pre-upgrade script causes apk to show an error, and it would not go away
with 'apk fix' since it ran into the same problem.
Fixes: 7c511d ("pine64-pinephone: remove old u-boot...")
Console UI can be used now instead of None UI.
Console UI is necessary to have access to the device over SSH
as no display can be used.
[ci:skip-build] already built successfully in CI
This devices runs a close-to mainline kernel as linux-odroid-hc2.
I have 2 of these devices which power my selfhosted infrastructure
for some time now and they work really well! Running my selfhosted
infrastructure on Alpine stable releases would be great.
On the pinephone, callaudiod handles the switching of default outputs,
so wys is unnecessary and may be causing issues when running in parallel
with callaudiod.
fixes#1217
with 5.14, there's some change to the path that alsa searches for ucm2
for this device. the install path for PineTab.conf is changed, and it
references "full" path to HiFi and VoiceCall profiles (which I kept in
`PineTab` dir, so that there could be several configs for the same
driver later on, if necessary/desired)
[ci:skip-build] already built successfully in CI
with 5.14, there's some change to the path that alsa searches for ucm2
for this device. the install path for PinePhone.conf is changed, and it
references "full" path to HiFi and VoiceCall profiles (which I kept in
`PinePhone` dir, so that there could be several configs for the same
driver later on, if necessary/desired)
The Alpine LTS kernel builds evdev as a module which means it's not automatically
available in the initfs. Including evdev allows osk-sdl to properly recognise
physical keyboards, just like on a real device.
Fixes: #1204
[ci:skip-build] already built successfully in CI
`$DEV` was an undefined variable so the atinout commands were printing their
helptext instead of actually running. This was noticeable because
the "Failed to enable VoLTE profile auto selecting" log was being printed
along with said helptext to syslog.
The block that defined `$DEV` had been accidentally deleted in
bb41f53879 . This change restores it.
Contains venus firmware for hw accelerated video encoding and decoding.
Also, ipa firmware is moved to beryllium folder as mbn format instead of
mdt+bXX files.
The list of files in firmware.files is now file type-wise alphabetically
sorted. Just for better readability.
Fix the feedbackd rule as the haptics modules has been renamed.
Although SDM845 doesn't really suspend well, MM needs suspend
and resume support when the device attempts to suspend. Without
which MM will crash and wont resume properly when a suspend
action is triggered.
Depend on msm-modem-uim-selection to configure to modem for modemmanager
