Sipeed M1s DOCK is a development board from Sipeed, it is based on
M1s module.
The Sipeed M1s introduces the BL808 SoC from Bouffalo Lab, the
BL808 is also used in Pine64 0x64 development board.
[ci:skip-build]: already built successfully in CI
The kernel source replaced with the lineageos version.
It fix the compile issues and the contains security fixes.
[ci:skip-build]: Already built successfully in CI
The pmaports package will follow lts releases from now on.
Intermediate versions will be tagged in the
gitlab.com/exynos5-mainline/linux repo.
Also enable CONFIG_LRU_GEN while we are at it (but not
CONFIG_LRU_GEN_ENABLED for now).
[ci:skip-build]: already built successfully in CI
And use gitlab.com/exynos4-mainline/linux as source so that we no
longer have to carry all the patches in pmaports.
[ci:skip-build]: Already built successfully in CI
Add modules for instantnoodlep NFC, touchscreen, and MHI related to modem, which is a
work in progress
[ci:skip-build] already built successfully in CI
I don't see any packages in pmaports that actually depend on dhcpcd, and
it hasn't been updated in 3 years... (upstream is at version 10.0.0
now...)
NOTE by ollieparanoid: networkmanager in Alpine used dhcpcd before, so
it was part of our default network stack. But that isn't the case
anymore since 2020:
db03cedea9
As stated in the MRs that added the patch, the ea8061 and s6evr02
panel drivers are originally from work by Simon Shields (fourkbomb).
Let's base our patches on the original commits to preserve authorship,
and note which modifications have been done, and by who. This is a
step towards making these patches ready for submission to upstream.
[ci:skip-build]: Already built successfully in CI
The UART console makes the boot process a whole lot slower due to printk
being synchronous. These devices are well enough supported that we can
disable UART logging by default to improve the boot speed. This
constitutes a ~30 second speedup on the SHIFT6mq at 115200 baud.
Also update the patches with new, rebased ones straight from
the linux-amlogic mailing list, and rename them.
Signed-off-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
[ci:skip-build] already built successfully in CI
Plasma Bigscreen requires specific configuration on the RPi4 to tell it
to load some device-specific stuff. In this case to disable 4K mode as
the device can not handle it
[ci:skip-build] already built successfully in CI
We need to tell openrc-settingsd which ntp service to use, otherwise
it'll default to busybox ntpd which we don't want.
Additionally make sure openrc-settingsd service gets launched at boot
with the post-install/post-upgrade script.
[ci:skip-build]: already built successfully in CI
Get the githooks from alpine, with the following changes:
* Make it possible to parse the additionally nested "device" folder
with the exceptions mentioned in our COMMITSTYLE
* Ignore "device/*" as a possible prefix for the commit
* Replace abuild references with pmbootstrap
Relates #2055
[ci:skip-build]: already built successfully in CI
deviceinfo allows to disable the framebuffer which automatically
skips the splash on boot. Honor this setting as well for the shutdown
splash. Also honor the PMOS_NOSPLASH cmdline parameter as well.
[ci:skip-build]: already built successfully in CI
Angler and Bullhead support is in early stage other msm899{2,4} does not
use the package yet => safe to use rc kernels to get closer to
qcom/for-next git tree.
Kernel 6.2 and 6.3 got few memory map fixes for angler and bullhead.
* Added 3 not yet merged patches for angler:
- add regulators
- memory overlap fixes
- proper cont_splash_mem setup
* Removed 0004-arm64-dts-qcom-msm8992-Don-t-use-sfpb-mutex.patch
(already applied and backported to 6.1 stable), thus renumber the
following patch.
* config
- Enable zram with lzo-rle, add pmb:kconfigcheck-zram (fixes warning:
zramctl: /dev/zram0: failed to set algorithm: Invalid argument)
- Enable crc32, lz4hc, zstd.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
[ci:skip-build]: already built successfully in CI
Make it easier to look up the librem5-base version that was used in the
device-purism-librem5 package, e.g. for writing service pack release
notes:
> Purism Librem 5 Phone (librem5-base: 58pureos1)
[ci:skip-build]: already built successfully in CI
The only thing we define in the config file is "SpacesAftertabs": true
besides the version. Apparently it works fine if the version is
removed, and it avoids an error if the version changed (as it just did
now):
> Version from config file is not the same as the version of the binary
> Binary: 2.7.0, Config 2.6.0
We removed the "install_if" of the APK plugin on GS so that one could
use GNOME Software exclusively for flatpak
[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI
Update from librem5-bae 56 to 58, which includes the following changes
from Purism
* default: gadget: Use CDC-NCM instead of CDC-ECM
* defaults: Add an initramfs script to reencrypt LUKS rootfs
* defaults: librem5-pm: Add rules for EM7565 and SIM7912G
* defaults: pulse: Reduce fragment size to 22 ms
* defaults: Switch USB PM timeouts back to 2s for devices and 0 for hub
* defaults: Enable WiFi powersave with brcmfmac driver
* defaults: usb_gadget: Run service as a dependency of UDC device unit
* defaults: usb_gadget: Set Before= relation to network.target
* defaults: librem5-pm: Enable NO_SUSPEND quirk and adjust PM properties
* d/control: Bump Librem 5 kernel dependency to 6.1.19pureos1
Note, that this update doesn't fix the modem disapearing modem during
suspend. So we keep the current workarounds we have.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[ci:skip-build] already built successfully in CI
