Kernel source updated to 6.1-rc7
Ext2 and Ext3 modules in aarch64 config disabled because Ext4 is backwards compatible.
2 fixes for PinePhone included in this source:
pinephone: fix power key behavior during suspend (avoid stuck key during resume)
pinephone keyboard: wait for 100ms after enabling power supply and before probing.
[ci:skip-build]: already built successfully in CI
In SDM845, the q6voice kernel driver connects modem and audio backends.
Callaudiod seems to switch to correct audio device and prepares it, however, the audio
device get's closed since no one from the userspace is actively listening to it.
This cuts the audio in call. As a workaround, I have added to script to disable the
suspend-on-idle pulseaudio module during calls, so the audio devices don't close automatically.
Includes the following changes:
- rebase onto rc4
- squash a few changes which were marked to get squashed/fixups
- dropped "wcd934x: use .prepare and .shutdown instead of .trigger"
- OP6 audio device tree changes
- revert of a DSI DCS commit[1], which caused havoc in unprepare
hooks of panel drivers
[1] - https://lore.kernel.org/linux-arm-msm/1892d0af-8aa4-dc03-887a-e44bb623b836@linaro.org/
Change-Id: I4790a278c0d35618ca824a036982769e66767ffd
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
It should have depended on mutter-mobile-schemas instead of
mutter-mobile. Looks like mutter-mobile-schemas was getting installed
instead of mutter-mobile for it only by chance until now.
[ci:skip-build]: already built successfully in CI
Downstream for kernel development, not for actual use.
Kernel defconfig taken from stock with:
- CONFIG_ANDROID_PARANOID_NETWORK unset
- CONFIG_DEVTMPFS set
- CONFIG_EXT4_FS_POSIX_ACL set
- CONFIG_LOCALVERSION set to "-downstream"
- CONFIG_SYSVIPC set
- CONFIG_USB_CONFIGFS_RNDIS set
- CONFIG_USER_NS set
Change-Id: I22bfd30dfc664dfaa2123c856b3662ddb37e760f
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Signed-off-by: Dylan Van Assche <me@dylanvanassche.be>
[ci:skip-build]: already built successfully in CI
The variable describes the configfs function name to use, no matter if
it's rndis, ncm, ecm or any other function. So change the name of the
variable, the string we write to the configuration file and some
comments.
Enable vulkan on supported hardware configurations
out of the box.
Change-Id: I6c8e1713e7c834aae3a162b8a681f5abde02ed5e
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Since 00648d0282dcca1da453c0b20d27e24bf901a854, the correct serial console name
is ttySx instead of the older ttyOx. Reflect this in cmdline passed to kernel
via u-boot
[ci:skip-build]: already built successfully in CI
Recommend installing:
- fwupd
- Receive firmware updates for supported hardware
The following packages are required to show device information at:
- Settings -> About this System -> Show More Information
Devices
- Firmware Security
- aha
- fwupd
- PCI
- pciutils
Graphics
- OpenGL
- mesa-demos
- Vulkan
- vulkan-tools
- Wayland
- wayland-utils
- X-Server
- xdpyinfo
Change-Id: I8a1eb484720f717f0504418f7c5c6af505b081b6
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: already built successfully in CI
The file brcmfmac43455-sdio.raspberrypi,4-model-b.bin is now provided by
linux-firmware-brcm package in Alpine. Remove to symlink to stop the
file conflict.
Note that the URLs in these scripts are not only for information, but
they are also used as marker by pmbootstrap so it knows these are
compatible with 'pmbootstrap ci'. I just fixed the typo in the
pmbootstrap code as well and made a new release, use pmbootstrap 1.50.0
or above to have it recognize these scripts with 'pmbootstrap ci' again.
flatbuffers should have been available on armv7,
since aports 0f3295fb0660f5caf59b8b2385f7c9305f1d57f0
[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI
I renamed the repository so GitHub changed all the checksums. :(
[ci:skip-vercheck]: the source files are still exactly the same
[ci:skip-build]: Already built successfully in CI
Support launching postmarketOS in QEMU on riscv64 architecture. It is
mostly copied from device-qemu-aarch64 with some riscv64-specific
modifications.
Currently UIs using Xorg like Mate, XFCE4 and LXQT work fine, Wayland
UIs like weston, plasma-mobile etc didn't work in my testing.
Also using "pmbootstrap qemu --tablet" is needed to make mouse input
work, the defaults don't seem to work at the moment.
[ci:skip-build]: already built successfully in CI
Now that touchscreen driver is supported in kernel, include the module
in initfs so it's available there.
[ci:skip-build]: Already built successfully in CI
Reimplement the distfile-check as python test inside this git
repository, so we don't need to download a tarball of ci-common.git to
run it. This would not have been nice for running the test with
'pmbootstrap ci', as we don't want it to get downloaded every time the
test runs.
This new implementation is done in less than 40 lines of code, very fast
and doesn't need to create a lot of files in /tmp to build a
"distfiletree".
Prepare to add a new test making use of the
parse_source_from_checksums() function in test_unreferenced_files.py by
extending the function to not only return the checksum file names, but
also the checksums. Also rename the file from test_unreferenced_files.py
to test_source.py.
Adjust all CI scripts that make use of .ci/common.py to
'pmbootstrap ci'. Move all scripts that are not direct entry points to
running CI scripts to .ci/lib.
Comment out the dtb check, as it is failing. Apparently it didn't run
properly before. Let's fix this after this CI change is done.
