Commit graph

7971 commits

Author SHA1 Message Date
Oliver Smith
2dc2b58c26
cross/busybox-static-*: upgrade to 1.36.1-r15 2023-11-13 08:44:24 +01:00
Sergey Lisov
3b85595ff8
modem/samsungipcd: update to v0.2.3 (MR 4544)
[ci:skip-build]: already built successfully in CI
2023-11-12 14:46:38 +01:00
Jan Jasper de Kroon
f193f840cc
linux-pine64-pinephonepro: upgrade to 6.6.0 (MR 4538)
[ci:skip-build]: already built successfully in CI
2023-11-12 13:58:58 +01:00
Danila Tikhonov
5e01ef5453
linux-postmarketos-qcom-sm7150: Upgrade to 6.6.1 (MR 4546)
Swap maintainer and co-maintainer (David is not active now and requested
it himself). Also update email addresses.

Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
2023-11-11 21:18:23 +03:00
Andreas Kemnade
937c1a8772
linux-kobo-clara-mainline: Upgrade to v6.6 (MR 4543)
[ci:skip-build]: Already built successfully in CI
2023-11-09 11:31:00 +01:00
Duje Mihanović
f578581ad0
linux-samsung-coreprimevelte: upgrade to 6.6 (MR 4540)
Bluetooth and poweroff support are also added.

[ci:skip-build]: already built successfully in CI
2023-11-08 19:48:15 +01:00
Duje Mihanović
5abb5574db
samsung-coreprimevelte: move downstream port to unmaintained (MR 4540)
The mainline port has almost reached full feature parity with the
downstream port. Default to mainline in new installations, but keep
downstream around as it'll still be needed for bringing up the currently
missing features.
2023-11-08 19:48:15 +01:00
Duje Mihanović
779361ba0a
linux-samsung-coreprimevelte: fix build error, enable PROC_DEVICETREE (MR 4540) 2023-11-08 19:41:28 +01:00
Jianhua Lu
d64553214f
alsa-ucm-conf-qcom-sm8250: remove _packagename and _flavor variable to improve readability (MR 4524)
[ci:skip-build]: Already built successfully in CI
2023-11-08 16:57:31 +01:00
Jianhua Lu
52703cce87
linux-postmarketos-qcom-sm8250: upgrade to 6.6.0 (MR 4524) 2023-11-08 16:57:31 +01:00
Clayton Craft
b08ff33a33
linux-postmarketos-allwinner: enable rtw88 wifi drivers on armv7 (MR 4536)
Used on some USB WiFi adapters. This also enabled RFKILL (used by iwd)

[ci:skip-build]: Already built successfully in CI
2023-11-08 16:41:12 +01:00
Bryant Mairs
e371bbdb1f
device-samsung-milletwifi: Add msm-modem to enable GPS (MR 4528)
GPS on milletwifi is via the "modem", which doesn't have any cell model
support, but is similar. This starts the modem remoteproc to support
GPS output.

[ci:skip-vercheck]
[ci:skip-build]: Already built successfully in CI
2023-11-08 16:27:54 +01:00
Bryant Mairs
190f13df1f
device-samsung-milletwifi: Add firmware for Wi-Fi and Bluetooth (MR 4528) 2023-11-08 16:27:49 +01:00
Bryant Mairs
0ccd921802
linux-postmarketos-qcom-msm8226: Move more sensors to modules (MR 4528)
Some of these sensors give spurious dmesg warnings, even when not used,
so move them to modules.
2023-11-08 16:27:49 +01:00
Bryant Mairs
809aa1a627
linux-postmarketos-qcom-msm8226: Enable nftables support (MR 4528) 2023-11-08 16:27:48 +01:00
Bryant Mairs
bbb73593be
linux-postmarketos-qcom-msm8226: Enable firmare loading (MR 4528)
Firmware drivers will load too early, before msm-firmware-loader, so they
won't load the necessary firmware. Instead, mark them as modules so they load
later in the boot process, when the firmware is available.
2023-11-08 16:27:48 +01:00
Bryant Mairs
3137915ddf
linux-postmarketos-qcom-msm8226: Upgrade kconfig to latest kernel (MR 4528)
Didn't do this when I upgraded the version, so doing it here as a separate
commit for clarity.
2023-11-08 16:27:48 +01:00
Jan Jasper de Kroon
a56803bc52
linux-postmarketos-allwinner: upgrade to 6.6.0 (MR 4537)
[ci:skip-build]: already built successfully in CI
2023-11-07 22:54:03 +01:00
blacksilver
95e9949260
linux-samsung-xcover3lte: fix kernel build (MR 4539)
[ci:skip-build]: already built successfully in CI
2023-11-07 22:50:18 +01:00
Clayton Craft
eef37b4d81
linux-lenovo-21bx: enable BINFMT_MISC, HIDRAW, ETHERNET kconfig (MR 4533)
BINFMT_MISC for running qemu on this system, and HIDRAW is used for some
USB devices. ETHERNET lets me use usb NICs, since this device does not
have a rj45 port/onboard NIC.

[ci:skip-build] already built successfully in CI
2023-11-04 15:44:39 -07:00
Anton Bambura
44c6fba704
samsung-w767: depend on linux-postmarketos-qcom-sc8180x>=6.6.0 (MR 4523)
[ci:skip-build] already built successfully in CI
2023-11-04 10:02:49 -07:00
Anton Bambura
b441adafe8
lenovo-yoga-5g: depend on linux-postmarketos-qcom-sc8180x>=6.6.0 (MR 4523) 2023-11-04 10:02:49 -07:00
Anton Bambura
a7d4668b8d
lenovo-flex-5g: depend on linux-postmarketos-qcom-sc8180x>=6.6.0 (MR 4523) 2023-11-04 10:02:49 -07:00
Stefan Hansson
24b0744ae4
purism-librem5dev: remove gpsd config (MR 4507)
And don't bother disabling the gpsd service given how unlikely it is
that someone is doing something serious with this device, let alone
having it in the first place. Plus, it's in testing.

[ci:skip-build] already built successfully in CI
2023-11-03 23:28:30 -07:00
Stefan Hansson
5a2aafd62a
pine64-pinephone: remove gpsd config (MR 4507)
This is no longer necessary as geoclue now can talk to ModemManager
directly for GPS information. It also presents a security risk due to
how gpsd works. As such, remove it.

Closes https://gitlab.com/postmarketOS/pmaports/-/issues/2340
2023-11-03 23:28:29 -07:00
Clayton Craft
0443f204c7
device-purism-librem5: upgrade to 1.51 (MR 4411)
- librem5-base upgraded to v64: some tweaks to shipmode stuff, but
  otherwise nothing interesting for us

- actually install the mm-broadmobi-port-types udev rule

- add udev rule + service for enabling bluetooth for Sparklan WiFi
  adapters (fixes #2043)
2023-11-03 21:55:40 +01:00
Clayton Craft
a44d7fd097
firmware-brcm43752: upgrade to 0.3_git20230613 (4411) (MR 4411)
pkgver was also updated to reflect that this is packaged from the latest
in git as of now. I probably should have done that from the start
(instead of ending up at the arbitrary '0.3'.)
2023-11-03 21:55:40 +01:00
Oliver Smith
1e47f77bc7
pine64-pinephonepro: update maintainers (MR 4529)
[ci:skip-build]: already built successfully in CI
2023-11-03 09:27:16 +01:00
Oliver Smith
9dad13d2e6
pine64-pinephone: update maintainers (MR 4529) 2023-11-03 09:27:16 +01:00
Oliver Smith
930aa6df78
cross/busybox-static-*: upgrade to 1.36.1-r14 2023-11-03 09:26:31 +01:00
Minecrell
6c2de41538
linux-postmarketos-qcom-msm8916: upgrade to 6.6 (MR 4520)
- Update to Linux v6.6
- Lots of cleanup and upstreaming, more than 40 commits upstreamed
  for 6.7

Device changes:
 - Add KTD2026 LED driver, used by bq-paella, bq-piccolo and
   acer-a1-724
 - bq-piccolo: Set proximity near level to fix detection in
   iio-sensor-proxy

New devices:
 - Vivo Y21L
   - eMMC, SD card, USB, Buttons, WiFi/BT
   - Sensors (Accelerometer, Magnetometer, Light)
   - No display yet

[ci:skip-build]: already built successfully in CI
2023-11-03 09:21:28 +01:00
Duje Mihanović
057584931e
linux-samsung-coreprimevelte-mainline: upgrade to 6.6-rc7 (MR 4517)
Also adds patches for WiFi and backlight.

[ci:skip-build]: already built successfully in CI
2023-11-02 08:59:36 +01:00
Anton Bambura
2770d39f10
soc-qcom-sc7180: set non-strict iommu for eMMC, SD card and USB (MR 4526)
[ci:skip-build]: already built successfully in CI
2023-11-02 08:53:33 +01:00
Clayton Craft
cc3dd7de87
postmarketos-mkinitfs: trigger on upgrades to sd-boot (MR 4525)
Since mkinitfs / boot-deploy install sd-boot in the ESP, it makes sense
to always trigger mkinitfs when sd-boot is upgraded so that we always
boot with the latest supported version.

[ci:skip-build]: already built successfully in CI
2023-11-02 08:49:27 +01:00
Clayton Craft
c9c4b492e4
main/postmarketos-initramfs: show OS version on splash screen (MR 4470)
This shows the OS version (from /etc/os-release), e.g. "edge", on the splash
screen. os-release is a tiny text file, adding it to the initramfs doesn't seem
too bad, and having this information on the splash screen can be helpful.

Note that this uses "VERSION" and not "PRETTY_NAME" from the os-release file,
since the splash already shows "postmarketOS" (and the pretty name includes
that too), it seemed redundant and took up valuable display space.

[ci:skip-build]: already built successfully in CI
2023-11-02 08:44:47 +01:00
Clayton Craft
1c56a8a0d1
main/postmarketos-base: include os-release in the initramfs (MR 4470) 2023-11-02 08:44:31 +01:00
Jan Jasper de Kroon
4adee867e1
linux-postmarketos-allwinner: upgrade to 6.6-rc5 (MR 4516)
[ci:skip-build] already built successfully in CI
2023-11-01 16:05:11 -07:00
Oliver Smith
f8f223fef0
main/postmarketos-ui-phosh: set pmOS wallpaper (MR 4527)
[ci:skip-build] already built successfully in CI
2023-11-01 16:02:41 -07:00
Oliver Smith
f231f88d4d
main/postmarketos-ui-gnome: set pmOS wallpaper (MR 4527)
Set myself as maintainer while at it, as Martijn is currently inactive.
2023-11-01 16:02:41 -07:00
Oliver Smith
fbc3f390fa
main/postmarketos-ui-gnome-mobile: set wallpaper (MR 4527)
Set the GNOME Mobile specific wallpaper in this package, now that it
isn't set in postmarketos-base-ui-gnome anymore.
2023-11-01 16:02:41 -07:00
Oliver Smith
367caeb4fc
main/postmarketos-base-ui-gnome: add wallpaper_pmos subpkg (MR 4527)
Add a subpackage that sets the pmOS wallpaper, instead of always setting
the wallpaper that was added for giving GNOME Shell on Mobile a better
contrast.
2023-11-01 16:02:36 -07:00
Caleb Connolly
614cbdc5d1
postmarketos-mkinitfs: trigger on initramfs tests (MR 4420)
Add a trigger to rebuild the initramfs when CI tests are installed.

[ci:ignore-count]
2023-10-31 20:39:55 +00:00
Caleb Connolly
c99a360a6e
unl0kr: add pmtest (MR 4420)
Add a test for CI that:
* ensures unl0kr runs for 10 seconds without crashing
* ensures that it doesn't print any errors

This sure isn't an "ideal" test, but it at least validates that the
framebuffer interface doesn't die horribly...

With a little more effort we should be able to run unl0kr and then pull
the framebuffer and check it against some known good unl0kr screenshot.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
2023-10-31 19:54:17 +00:00
Caleb Connolly
6fcc759991
device/community/firmware-*-sdm845: add pmtest subpackages (MR 4420)
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
2023-10-31 19:54:17 +00:00
Caleb Connolly
570e52d99c
device/community: add pmtest subpackages for a few sdm845 devices (MR 4420)
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
2023-10-31 19:53:22 +00:00
Caleb Connolly
2204c0a390
main/bootrr: new aport (MR 4420)
bootrr is a simple shell script tool for validating that a given board
has booted correctly. It checks that all expected drivers are loaded.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
2023-10-31 19:53:22 +00:00
Caleb Connolly
bcd6fc9c32
modem/qrtr: add ci tests (MR 4420)
Add a basic test that runs qrtr-lookup and ensures that at least one QMI
service is available. This is mostly a proof of concept and can be
extended in the future.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
2023-10-31 19:53:22 +00:00
Caleb Connolly
69832ab121
postmarketos-initramfs: support running in CI (MR 4420)
Enable using the postmarketOS initramfs for boot-testing devices, in
this scenario we don't care about some components like the splash, mdev,
or subpartitions, instead we want to run full udev (to load all devices)
and then run hooks. The ci hook will deadloop after running tests.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
2023-10-31 19:53:22 +00:00
Caleb Connolly
ac1d78a246
devicepkg-dev: add pmtest helper (MR 4420)
Add a helper to generate a post-install script for device pmtest
subpackages. This script configures the console and enables logging in
the initramfs for images running in CI.

[ci:ignore-count]
2023-10-31 19:53:22 +00:00
Caleb Connolly
161711dea3
main/postmarketos-test: new aport (MR 4420)
This package provides a helper for writing a pmtest subpackage, as well
as being a place to write generic tests that aren't specific to a device
(e.g. a suspend test).

Signed-off-by: Caleb Connolly <caleb@connolly.tech>

[ci:ignore-count]
2023-10-31 19:53:22 +00:00