Currently phosh is broken in postmarketOS edge. Fork wlroots from Alpine
and revert the new consistency check that results in the breakage. I've
submitted the same to Alpine, but let's get it in pmOS now so it is
fixed ASAP.
Alpine MR: https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/14522
[ci:skip-vercheck]: new package added with -r1 on purpose
Removed 2 actions cause future suspends to trigger a kernel bug that
ends up spamming the kernel log with "ehci-platform 1c1b000.usb: port 1
resume error -110" and eventually makes the device not respond to any
input or hang in shutdown/reboot.
Workaround for issue: #848
Co-Authored-By: Oliver Smith <ollieparanoid@postmarketos.org>
Since the installer leaves the partition in a state where the initramfs
needs to resize it. But without the force parameter the postmarketOS
initramfs won't touch the partitions
Mostly the GCC10 yylloc failure was seen but several others have been
observed:
* wireguard script was silently failing
* several gcc10 x86 errors
* a checksum from kernel.org has changed
Now we have 3 different gcc10 yylloc patches:
gcc10-extern_YYLOC_global_declaration.patch:
Linux < 4.2
linux4.2-gcc10-extern_YYLOC_global_declaration.patch:
Linux 4.2+
linux4.17-gcc10-extern_YYLOC_global_declaration.patch:
Linux 4.17+
[ci:skip-build]
[ci:ignore-count]
[ci:skip-vercheck]
Use the dtb-appended kernel file, e.g. postmarketos-exynos4-dtb instead
of postmarketos-exynos4, if it is available. This is needed to flash a
mainline kernel with appended dtb to isorec devices.
With these kernel sources the device boots successfully,
sometimes. Usually, kernel panics and device reboots a couple of
times, but after a few attempts (maybe 1, maybe 7) it succeeds to
boot. The problems seem to be related to FIMC IS, unfortunately it
does not seem to be possible to just disable it in the kernel config,
as that leads to compilation errors.
I have so far just experimented with getting wifi up and running, but
it does not work out of the box even after adding firmware package
with files from TheMuppets, wpa_supplicant fails to connect and dmesg
is filed with lines like:
```
[ 112.509235] [L0: wl_event_handle: 3109] CFG80211-INFO2) wl_escan_handler : Couldn't find P2PIE in probe response/beacon
```
[ci:skip-build]: already built successfully in CI
plasma-nano (albeit saying it is 5.20.1) is pointing to the master branch
and kept as-is (there is no updates in master and I don't see a reason to
downgrade it to the actual 5.20.2 tag which is a few small commits behind
the master).
Upstream keeps making breaking changes in patch releases.
Let's fork alsa-ucm-conf entirely for now instead of just patching
in some files to ensure that these files don't break every few months.
This fixes audio on MSM8916 devices when not using the modem.
This patches from the megi solves the issue of the MIPI-DSI panels
framerate being at 2/3rd of actual or expected rate.
[ci:skip-build]: already built successfully in CI
This subpackage was removed when a proper fix for suspend was merged,
however apk doesn't know to purge this subpackage, so the old elogind
hook workaround stuck around. This workaround could probably be removed
once we're sure all folks on edge have installed this upgraded package
with the 'provides'...
Squeekboard >= 0.10.0 looks for an a11y setting to determine if it
should show up on the screen. This sets the config setting to 'true' so
that it shows up by default. It can apparently be toggled off in Gnome
Settings, but I haven't found the UI switch to do that yet..
