Add rt5033 modules to initfs for the following devices, to unlock FDE with
USB OTG keyboards:
- Samsung Galaxy Ace 4
- Samsung Galaxy Core Prime
- Samsung Galaxy Grand Prime
- Samsung Galaxy S4 Mini Value Edition
[ci:ignore-count]
[ci:skip-build]: already built successfully in CI
Add rt5033 modules to initfs for the following devices, to unlock FDE with
USB OTG keyboards:
- Samsung Galaxy A3/A5/A7
- Samsung Galaxy E7
- Samsung Galaxy Grand Max
The x86 devicetree patch is included in latest upstream version, which
is already packaged in alpine.
[ci:skip-build]: already built successfully in CI
- Add support for upower, in order to enable automatic shutdown when battery is
critically low
- Set UPower PercentageLow threshold to 10% so it triggers even when fuel gauge
is not calibrated (see estimations provided in 4b54fc7f83:
"linux-postmarketos-omap: add N900 battery capacity estimation")
The port 7236 for TCP is registered with IANA by the
Wi-Fi Alliance for use for the Wi-Fi Display Protocol,
a.k.a. Miracast.
To establish the connection, the local DHCP server has to
be allowed to respond to requests on peer-to-peer Wi-Fi
networks.
Signed-off-by: Markus Göllnitz <camelcasenick@bewares.it>
[ci:skip-build]: already built successfully in CI
The display panel for these devices was upstreamed and now uses a
different name. Update it so the display is loaded properly.
[ci:skip-build]: already built successfully in CI
Provide a rough battery capacity estimation for the bq27200 fuel gauge inside
Nokia N900. This is useful when the fuel gauge is out of calibration and a
learning cycle cannot take place due to broken USB/charging port on the device.
[ci:skip-build]: Already built successfully in CI
motorola-surnia also supports the inx panel as of Linux 6.3, add it to
the initfs so the display can be initialized early.
There is no tianma panel for surnia (only for harpia) so drop that.
It's not clear why it was there in the first place.
[ci:skip-build]: Already built successfully in CI
With the udev rule in that package feedbackd can start using the
vibration motor for haptics.
Also we can remove the direct swclock-offset dependency since the soc
package depends on that also.
[ci:skip-build]: already built successfully in CI
It seems like the driver name has changed *again* in 6.5.x kernels, so
let's just have both drivers in the initramfs to help with migrating
between newer/older kernels and any future flip/flopping of drivers.
This is a bit of a hack... it works because missing modules are not
fatal for mkinitfs. The reason why they aren't fatal is that whether or
not it's builtin is somewhat arbitrary... there's an open issue[1] for
mkinitfs to make this smarter, i.e. throw an error if the .ko doesn't
exist AND it's not builtin for the *installed* kernel.
When that's implemented then this patch would likely result in mkinitfs
failing on this device because one of those drivers may not be installed
or builtin. I don't have time to implement this in mkinitfs, so adding
this crude workaround of just including both seemed like a reasonable
thing to do since the 6.5 kernel will break fde on this device (this has
happened before).
[ci:skip-build]: already built successfully in CI
`url` and `pkgdesc` do affect the resulting package and as such
`pkgver` should be incremented, but it wasn't.
Fixes 0dfb1219f8
[ci:skip-build]: already built successfully in CI
Some change (I think some tools switching from the coreutils to busybox
versions?) subtly broke debug-shell behaviour. Try to fix it.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
[ci:skip-build]: already built successfully in CI
Hides this error when FDE is *not* enabled, and ultimately skips the
block of logic for detecting the luks partition:
/init: line 437: cryptsetup: not found
This error has confused some users in the past, who were reporting
issues with the initramfs.
There's probably a minor speedup on non-FDE systems as well from
bailing early.
