@drebrez deserves much credit for this one for all the testing,
bisecting and for fixing everything. Thank you very much!
---
* devices which need a custom weston.ini ship it with a install_if
subpackage, so it only gets installed when weston is installed. This
sounds complicated, but is actually pretty clean in the APKBUILD.
* postmarketos-ui-weston: has a weston.ini.default, which enables
xwayland and uses fbdev as backend (because that's what most
devices use!). It defaults to the weston.ini.default if there is no
weston.ini (as installed by the device package).
* changed spaces to tabs for consistency, general minor refactoring of
device-APKBUILDs
Placing such files in /tmp/ is an unnecessary attack vector, as
@pavelmachek showed. All udev rules, which mentioned /tmp/weston.log
do not contain any path anymore.
Logs can be read with:
logread -f /var/log/messages | grep weston
See also: <https://wiki.alpinelinux.org/wiki/Syslog>
* Rebase on 4.11.12 kernel upstream
I took the relevant patches from https://git.linaro.org/people/john.stultz/flo.git/log/?h=flo-v4.11 and
compiled with upstream kernel.org 4.11.12 kernel. 4.12rc1 and later have not fixed yet problems
with freedreno gpu hanging. So we now have an upstream source for the kernel and John Stultz
patches separately.
Set this to y as it does not seem to have problems in Alpine - CONFIG_HW_RANDOM_MSM=y
Enable USB OTG in kernel. I still need to find out how to enable it in Alpine.
* Use pkgver instead of hash and other changes
* Add dependencies for X11 and osk
Added pointercal. Added dependencies so Xfce would work out of the box. Made changes in
90-android-touch-dev.rules as they are needed for proper X11 touchscreen calibration.
* postmarketos-base: Execute setup-udev, remove mosh from dependencies
* Run setup-udev [0], because that is what `setup-xorg-base` does [1].
It configures more than one OpenRC service and it also messes with the
runlevels. Only after running that, Hildon works (tested in Qemu).
[0]: 2fbea8b8da/main/eudev/setup-udev
[1]: 06300dd483/setup-xorg-base.in (L25)
* Remove `mosh` from `postmarketos-base` dependencies. I don't think anyone
uses it right now, and it's easy to add custom packages in `pmbootstrap init`
nowadays.
* Minor style changes in the `APKBUILD`
* [rx51] Remove udev-trigger service start
* Package Broadcom Wi-Fi firmware from AOSP
This uses a mirror of AOSP's platform/hardware/broadcom/wlan repo at version
android-8.0.0_r12 (6c8ef5b600cec5d36a54a0276fe8c97b9ab8d6bb).
This is needed as Nexus 6P uses a BCM4358, and the blob available in Alpine's
linux-firmware package is old and vulnerable to Broadpwn. See #513.
* device: angler: enable Wi-Fi and graphics output
Changes:
- Set resolution on bootup
This is copied from the Nexus 5's init script.
- Add Wi-Fi calibration file and change firmware path
This is also based on the Nexus 5's implementation.
- Enable CONFIG_VT and NFS in the kernel
- Explicitly use identity touchscreen calibration
- Rename the touchscreen udev rules
- Enable msm-fb-refresher
For some reason the ofono rules don't always work for the N900's modem.
This picks out the relevant parts of that rule and seems to successfully
set up the modem device every time now.
* pmb.helpers.run: support running processes in background
* enable QXL driver support in the linux kernel configurations so
that we can also use SPICE to connect to the VM.
QXL is a paravirtual graphics driver with 2D support
The SPICE project aims to provide a complete open source solution for remote
access to virtual machines in a seamless way.
Both DRM_QXL and DRM_BOCHS are enabled as modules.
According to [1], on Linux guests, the qxl and bochs_drm kernel modules
must be loaded in order to gain a decent performance
* qemu: add new option --spice to connect to VM using a SPICE client
If specified, 'pmbootstrap qemu' will look for some SPICE client in the
user's PATH and run qemu using the QXL driver.
Currently supported spice clients are 'spicy' and 'remote-viewer' but
adding support for more clients can be easily done.
qemu with qxl support will run on port 8077/tcp, which doesn't belong to
any well-known service and represents 'PM' in decimal.
References:
[0] https://www.linux-kvm.org/page/SPICE
[1] https://wiki.archlinux.org/index.php/QEMU#qxl
[2] https://wiki.archlinux.org/index.php/QEMU#SPICE
[3] https://github.com/postmarketOS/pmbootstrap/issues/453 (partially fixed)
* firmware-asus-flo: packaged all flo firmware
* device-asus-flo: depend on firmware-asus-flo package
* default android wifi config
* Add wifi and freedreno support
* change to console=ttyMSM0 - as per https://dflund.se/~triad/krad/nexus7-flo/
* Add current kernel config as it is currently working with wifi.
* Increase pkgrel to account for changes in the kernel config.
Quite a few things use dbus (plasma, hildon, ofono, connman,
networkmanager, etc) that I think it makes sense to just have this
started by default in pmOS rather than have every device package
implement this on their own.
In case someone shows up with a use-case, where dbus by default
is not desired, please speak up. Possible solutions are in #628.
* Started with stock kernel config (fairphone-perf_defconfig)
* Enabled DEVTMPFS
* Deactivated MSM_KGSL
* Enabled the serial console
* Enabled USB networking
This adds a custom swap file service, which allows specifying a
recommended swap size in the deviceinfo file via
`deviceinfo_swap_size_recommended`. For the N900 this defaults
to 1024 MB now. As the swap file is created in the root partition,
we have encrypted swap now (unless encryption is disabled with
`--no-fde`).
This is a workaround for #429, until the iteration count can be
specified directly in cryptsetup.
* Add default iter-time option, and option to override
* set SHA1 default hash for luksFormat, add option to override
* [RX51] load omap-sham in initramfs for HW accel. sha1
* Add LG G Watch (dory) support
* Use github.com mirror instead of googlesource.com to have fixed checksum
* Fix kernel compilation and remove unnecessary initfs-hook for framebuffer settings
* Check kernel config
* Allow specifying multiple kernel packages, and also no packages
which defaults to scanning all kernel configs (it is super fast
anyway)
* Add the check to Travis CI
* Adjust existing kernel configs, so they pass the kconfig_check.
(We've had to put in a lot of defaults in the aarch64
linux-postmarketos configs, that's why the diff is a bit unclean.)
* Increase modified kernel pkgrels
- Revert to LineageOS 14.1 kernel
- Enable virtual terminal
- Update touchscreen settings
At the moment, display output works, but only when the following is run:
while [ ! ]; do cat /sys/class/graphics/fb0/modes >
/sys/class/graphics/fb0/mode; done.
