In preparation of new sdm660-mainline kernel release all
downstream ports will become irrelevant.
If needed, downstream port can still be chosen as
'xiaomi-lavender-downstream' during pmbootstrap init.
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
[ci:skip-build]: already built successfully in CI
non-free firmware not (yet?) submitted to linux-firmware, this is pulled
directly from the latest versions distributed by lenovo, instead of some
probably outdated repo distributed by random folks.
The bt firmware here fixes an issue where the bt range on the 21bx is
extremely poor (like ~1 meter or less)
linux3.4-ARM-8933-1-replace-Sun-Solaris-style-flag-on-section-xz-supplementation.patch
contains an addition that was not part of
linux3.4-ARM-8933-1-replace-Sun-Solaris-style-flag-on-section.patch
simply because error did not occur with the config I tested with.
[ci:skip-build]: already built successfully in CI
This device package is intended to replace the tablet-x*uefi device
packages. It was made by basically merging config from those two
packages.
One important change (besides the name, covered later) is that it
replaces grub-efi with sd-boot for these devices.
The pkgver is starting at '8' to get ahead of the packages this is meant
to replace.
Because package names, especially for device packages(!), is important,
here's a long explanation of why the name is "device-generic-x86_64":
"uefi" was excluded from the device package name, because it should (in
theory at least...) be able to simultaneously support EFI and non-EFI
boot in 1 device package. The device-qemu-amd64 package kiiiinda does
this already and could be a useful example for how to do that, though in
this situation we'd need to support syslinux for legacy boot instead of
what qemu does (bypass installed bootloader and directly boot the
kernel). In other words, the packages this one is meant to replace only
support EFI boot, they currently don't support legacy boot. So IF we
need to support legacy boot in the future and IF there's no way to
support both in one package, THEN we can consider changing the name of
this one or calling the other "-legacy" or something.
"x86_64" instead of "amd64" (like the device-qemu-amd64 device package),
because "x86_64" is what Alpine uses to refer to this arch, and it
doesn't have a hw vendor name baked into it.
"tablet" was dropped from the name, because there are many other x86_64 devices
out there that people might want to install pmOS. For example, it might be
confusing if you want to install pmOS on an x86_64 toaster but best
pmOS image for it is named "device-tablet-..."
This replaces the outdated blobs extracted from Android vendor partitions with more recent firmware provided in the linux-firmware-brcm package.
[ci:skip-build]: Already built successfully in CI.
Add the Portugese/Spanish keymap. Similarly to the Finnish/Swedish
keymap, it's compatible with both Portugese and Spanish keyboards.
Also, modify x11-keymap so that the Portugese/Spanish map will use
Alt+Shift to enter an underscore in the F key and a backslash in the C
key, which was done to avoid redundancy with the "Ñ" key.
Signed-off-by: Lux Aliaga <lux@nixgoat.me
[ci:skip-build] already built successfully in CI
Start squashing all the .mdt files into .mbn and install those. Keep
installing compatibility symlinks so old and new kernel versions can
work with the firmware - the kernel detects the correct format anyways.
[ci:skip-build] already built successfully in CI
Include the bm818-tools by default for the Librem5. This allows users to
check and change the VoLTE status.
Resolves: https://gitlab.com/postmarketOS/pmaports/-/issues/1905
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[ci:skip-build]: already built successfully in CI
Currently, the build fails with the following error message:
arch/arm/mm/proc-v7.S: Assembler messages:
arch/arm/mm/proc-v7.S:346: Error: junk at end of line, first unrecognized character is `#'
make[1]: *** [scripts/Makefile.build:343: arch/arm/mm/proc-v7.o] Error 1
make: *** [Makefile:952: arch/arm/mm] Error 2
This is because in binutils package, starting with version 2.41, stopped
supporting Sun/Solaris style flags on section directive.
To fix that, use a patch that replaces this with the GNU style flags,
partly backported from mainline.
Fixes: https://gitlab.com/postmarketOS/pmaports/-/issues/2355
Manual config changes:
* DRM_MSM=m (there's a race condition, genpd_power_off_unused needs to
turn off mdss_gdsc before the display driver inits, otherwise screen
stays black)
[ci:skip-build]: already built successfully in CI
For some reason we don't have dtb subdirectories.
Tested locally to pass pmbootstrap install and checked /boot for dtbs
[ci:skip-build]: already built successfully in CI
hexagonrpcd is necessary to provide access to the filesystem for the SDSP.
Also, OP6T accelerometer is mounted differently than the screen, adjust
it with a mount matrix. This way, screen rotations follow the actual
screen rotation by the user.
hexagonrpcd is necessary to provide access to the filesystem for the SDSP.
Also, OP6 accelerometer is mounted differently than the screen, adjust
it with a mount matrix. This way, screen rotations follow the actual
screen rotation by the user.
SHIFT6mq accelerometer is mounted differently than the screen,
adjust it with a mount matrix. This way, screen rotations follow
the actual screen rotation by the user.
Remove the gtk tweaks, they break the UI now, presumably because I've
added proper notch config for FP4 to the gmobile project.
Also we can remove the phoc.ini since nowadays phosh can properly scale
itself based on the screen information and doesn't need this static
config anymore.
[ci:skip-build]: already built successfully in CI
This device port uses U-Boot as a basic bootloader. Users should install
U-Boot and reinstall pmOS to the U-Boot version of port (this one).
Thus an upgrade from old installations that depend on old vendor bootloader
is not implemented.
Instruction how to install U-Boot can be found on dedicated page of
pmOS wiki.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
In order to get stable WiFi and Bluetooth MAC addresses, install the
bootmac service by default.
Also as noted in other device package reviews, qbootctl-openrc should be
a dependency so the post-install/post-upgrade script will definitely
have the openrc service available.
[ci:skip-build]: already built successfully in CI
Also disable some drivers and subsystems in the kernel configuration
that are generally unused on the platform, according to the
corresponding patch in the kernel repository.
[ci:skip-build]: already built successfully in CI
Drop all the non-sdm845 DTBs. This saves about 12MiB
of space in /boot
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
[ci:skip-build]: already built successfully in CI
[ci:skip-vercheck] no feature changes
Signed-off-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
[ci:skip-build]: already built successfully in CI
Manual config changes:
* Enable SYSCON_REBOOT_MODE
* Enable LEDS_QCOM_LPG (not yet used but initial driver support present)
[ci:skip-build]: Already built successfully in CI.
For some reason kernel does not print anything to ttySAC3 even with
console=/dev/ttySAC3. If earlycon is specified it prints the early
stuff though.
Add ttySAC3 in both places anyways since that should be the correct
uart.
EFI booting with systemd-boot requires building the kernel with ZBOOT -
the EFI decompressor stub. However, this breaks the old Android booting.
Detect when ZBOOT is enabled and install both vmlinuz.efi as well as the
old gzipped kernel image.
To help make this upgrade more seamless, continue to support building
the kernel with ZBOOT disabled and just print a warning.
Disable module stripping - we compress them anyway and a recent kernel
change seems to have caused some bug here.
This is a packaging change that doesn't require rebuilding the kernel.
[ci:skip-vercheck]
With recent gcc versions we get errors like:
/linux/arch/arm/mm/proc-v7.S: Assembler messages:
/linux/arch/arm/mm/proc-v7.S:425: Error: junk at end of line, first unrecognized character is `#'
Seen on at least two samsung kernels based on 3.4 and 3.10. Fix issue
by backporting (part of) commit found in mainline.
Linux 6.7-rc1 looks for the venus (video) firmware in
qcom/venus-1.8/venus.mbn instead of qcom/venus-1.8/venus.mdt.
Let's install it in both places with a symlink so that the firmware
packages work for both older and newer Linux versions.
[ci:ignore-count]: lots of packages
[ci:skip-build] already built successfully in CI
Swap maintainer and co-maintainer (David is not active now and requested
it himself). Also update email addresses.
Signed-off-by: Danila Tikhonov <danila@jiaxyga.com>
The mainline port has almost reached full feature parity with the
downstream port. Default to mainline in new installations, but keep
downstream around as it'll still be needed for bringing up the currently
missing features.
GPS on milletwifi is via the "modem", which doesn't have any cell model
support, but is similar. This starts the modem remoteproc to support
GPS output.
[ci:skip-vercheck]
[ci:skip-build]: Already built successfully in CI
Firmware drivers will load too early, before msm-firmware-loader, so they
won't load the necessary firmware. Instead, mark them as modules so they load
later in the boot process, when the firmware is available.
BINFMT_MISC for running qemu on this system, and HIDRAW is used for some
USB devices. ETHERNET lets me use usb NICs, since this device does not
have a rj45 port/onboard NIC.
[ci:skip-build] already built successfully in CI
And don't bother disabling the gpsd service given how unlikely it is
that someone is doing something serious with this device, let alone
having it in the first place. Plus, it's in testing.
[ci:skip-build] already built successfully in CI
This is no longer necessary as geoclue now can talk to ModemManager
directly for GPS information. It also presents a security risk due to
how gpsd works. As such, remove it.
Closes https://gitlab.com/postmarketOS/pmaports/-/issues/2340
- librem5-base upgraded to v64: some tweaks to shipmode stuff, but
otherwise nothing interesting for us
- actually install the mm-broadmobi-port-types udev rule
- add udev rule + service for enabling bluetooth for Sparklan WiFi
adapters (fixes#2043)
pkgver was also updated to reflect that this is packaged from the latest
in git as of now. I probably should have done that from the start
(instead of ending up at the arbitrary '0.3'.)
- Update to Linux v6.6
- Lots of cleanup and upstreaming, more than 40 commits upstreamed
for 6.7
Device changes:
- Add KTD2026 LED driver, used by bq-paella, bq-piccolo and
acer-a1-724
- bq-piccolo: Set proximity near level to fix detection in
iio-sensor-proxy
New devices:
- Vivo Y21L
- eMMC, SD card, USB, Buttons, WiFi/BT
- Sensors (Accelerometer, Magnetometer, Light)
- No display yet
[ci:skip-build]: already built successfully in CI
systemd-boot is used for EFI boot (when using "pmbootstrap qemu --efi"),
legacy boot (seabios) is still supported as well (pmb/qemu boots the
kernel directly).
[ci:skip-build] already built successfully in CI
msm-firmware-loader path is valid only on booted phones, which won't exist
in pmbootstrap chroot, but results in no such file or directory errors.
Drop 30-gpu-firmware.files to workaround temporarily. Besides it's
preferred to be put in firmware packages.
[ci:skip-build]: already built successfully in CI
Samsung Manta is now supported by linux-posmarketos-exynos5.
Update device-samsung-manta to use it, and move downstream kernel and
device to unmaintained.
Also adds a script and networkmanager configuration to autoconfigure
WiFi MAC address from /proc/cmdline.
Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>
WiFi firmware for brcm43241b0 is in linux-firmware, but not the calibration (bcmdhd.cal).
Mainline driver need bcmdhd.cal to be renamed brcmfmac43241b0-sdio.samsung,nexus10-manta.txt.
Mainline Bluetooth driver needs BCM.samsung,nexus10-manta.hcd.
Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>
Postmarketos-base-downstream provides a lightdm config file needed
for GUI to be brought up when using an x11 based UI.
[ci:ignore-count]
[ci:skip-build]: Already built successfully in CI
- Add SM5708 modules to initfs for the following devices, to unlock FDE
with USB OTG keyboards and fix USB networking.
- Configure getty using deviceinfo_getty variable.
- Add USB ID 04e8:6860 to deviceinfo
[ci:skip-build]: already built successfully in CI
Some firmware packages has only a WCNSS config file, which is decoded
from base64 uploaded to Pastebin, and there is nothing to unpack.
[ci:ignore-count]
[ci:skip-build]: already built successfully in CI
Upstream boot-deploy (me, lol) removed generate_gummiboot,
and now generate_systemd_boot is used to configure both gummiboot and
systemd boot.
[ci:skip-build]: already built successfully in CI
Backported from our development branch:
- SPI flash for chromebooks;
- support for samsung-manta (see !4406 for status);
- fix performance of video decoder which drastically reduces lag when streaming games.
[ci:skip-build]: already built successfully in CI
Adjust to change in Alpine that moved rockchip to single image:
https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/51827
Fix for:
ERROR: The following firmware binary does not exist in the rootfs_pine64-rockpro64 chroot: /usr/share/u-boot/rockpro64-rk3399/idbloader.img
[ci:skip-build]: already built successfully in CI
As with the firmware commit, no effort is done to keep firmware packages
working with downstream kernel.
[ci:skip-build]: already built successfully in CI
Package adsp, modem and wifi firmware for mainline. Compatibility with
downstream firmware is not kept on purpose, if somebody wants this,
please make some subpackage for it!
Tested on the V0.2 variant of the hardware which comes with some U-Boot
build preinstalled. I don't know if this will be the case for the final
version that will be shipped to customers, but the announecment would
imply so given that it says the device "incorporates a advanced [sic]
BIOS compatible with UEFI".
[ci:skip-build]: already built successfully in CI
This includes the "Alta" and "Solitude" boards, the latter of which I
also introduce a device package for in a later patch. It should be easy
to introduce support for the former, but I don't have the hardware to
test that on.
The two new patches have been merged and will be included in Linux 6.7
as I understand.
Due to symlinks from linux-firmware-ath10k apk is now pulling in
linux-firmware-qcom which already provides a630_sqe.fw.
Since this file is not device/vendor-specific we can really use the file
from linux-firmware and not provide our own. For the record,
a619_gmu.bin also shouldn't be device-specific but currently
linux-firmware doesn't provide that one.
Also just pulling linux-firmware-qcom for this tiny file is pretty space
inefficient but due to the symlink dependency mentioned above, just
removing this file for now from the firmware package removes the file
conflict reported by apk:
ERROR: linux-firmware-qcom-20230919-r1: trying to overwrite lib/firmware/qcom/a630_sqe.fw owned by firmware-fairphone-fp4-adreno-20230215-r1.
[luca: update commit message to reflect dependency situation, update
packaging code a bit]
I cannot maintain this device because I do not have it, but it is
similar to the Pixel 3a, which I can maintain.
Move the kernel into a subpackage in case support for a different panel
(the Tianma NT37700F panel) is added.
[ci:skip-build]: already built successfully in CI
* Add kernel modules for display to modules-initfs
* Add GPU firmware and dependency for Vulkan
* Add qbootctl to mark the current A/B slot as successful
* Add bootmac to set the Bluetooth MAC address on boot
[ci:skip-build]: already built successfully in CI
Kconfig changes:
* Enable PWM_CLK and INPUT_PWM_VIBRA instead of INPUT_CLK_VIBRATOR for
Nexus 5
* Disable unused clock drivers
* Disable MEDIA_SUPPORT - currently unused
* Enable LEDS_TRIGGER_PATTERN for feedbackd
* Disable all of NET_VENDOR_* (which is Ethernet devices)
[ci:skip-build]: already built successfully in CI
It utilize msm-firmware-loader for minimize device specific firmware package.
It add necessary modules to initramfs for fix fde.
modem package has been removed in favor of soc-qcom-msm8953-modem.
30-gpu-firmware-files has been removed.
[ci:skip-build]: already built successfully in CI
It utilize msm-firmware-loader for minimize device specific firmware package.
It add necessary modules to initramfs for fix fde.
modem package has been removed in favor of soc-qcom-msm8953-modem.
30-gpu-firmware-files has been removed.
Depend on soc-qcom-msm8953-modem and initramfs.
Add necessary modules to initfs for fix touchscreen under fde.
[ci:skip-build]: already built successfully in CI
This release includes security fixes.
Changes:
- 161e7f1ed3
- ba16d92aa0
Change-Id: Ibf3c6871cbe044f23091ccfe8a03869d38fb3851
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: Already built successfully in CI
It add necessary modules to intramfs for fix fde.
modem package has been removed in favor of soc-qcom-msm8953-modem.
30-gpu-firmware-files has been removed in favor of
soc-qcom-msm8953-initramfs.
[ci:skip-build] already built successfully in CI
It utilize msm-firmware-loader for minimize device specific firmware package.
It add necessary modules to intramfs for fix fde.
modem package has been removed in favor of soc-qcom-msm8953-modem.
30-gpu-firmware-files has been removed.
It utilize msm-firmware-loader for minimize device specific firmware package.
It add necessary modules to initramfs for fix fde.
modem package has been removed in favor of soc-qcom-msm8953-modem.
pointercal, fb.modes, 30-gpu-firmware-files has been removed.
Utilize msm-firmware-loader for minimize device specific
firmware package.
Add necessary modules to initramfs for fix fde.
Use soc-qcom-msm8953-modem and soc-qcom-msm8953-initramfs as a dependency.
ERROR: the source file 'WCNSS_qcom_wlan_nv.bin' has different checksums in the following files:
- device/testing/firmware-samsung-j5/APKBUILD: 742ee81d034116cf1ecdfae5f75495e6b10ce5be0c2a999b6c8a2c161b1da8b48d6810d5405edb8c829b96fdf75e45a565c74963c76d1bca4aaedf28572fa91f
...
Fix this by setting a different target filename in the package you modified:
https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#source
[ci:skip-build]: already built successfully in CI
Now that the modem firmware is installed in the referenced location, the
firmware patch is not needed, so remove that as well.
Also backport a fix for the Pixel 3a XL so a kernel upgrade isn't needed
for that.
Fixes broken fde as reported in https://gitlab.com/postmarketOS/pmaports/-/issues/2314.
Both Tianma and EBBG variant use the upstream touchscreen drivers in 6.5.
Add them to the initramfs as it was missed when upgrading to 6.5 kernel release.
[ci:skip-build] already built successfully in CI
Provide common board-2.bin file, extended from linux-firmware.
This file will be temporarily provided and dropped once all devices
are added to upstream linux-firmware's board-2.bin file.
Provide common board-2.bin file, extended from linux-firmware.
This file will be temporarily provided and dropped once all devices
are added to upstream linux-firmware's board-2.bin file.
Provide common board-2.bin file, extended from linux-firmware.
This file will be temporarily provided and dropped once all devices
are added to upstream linux-firmware's board-2.bin file.
Without qcom,board-id and qcom,msm-id we need to use header version 2,
otherwise the device doesn't boot.
[ci:skip-build]: Already built successfully in CI
Add rt5033 modules to initfs for the following devices, to unlock FDE with
USB OTG keyboards:
- Samsung Galaxy Ace 4
- Samsung Galaxy Core Prime
- Samsung Galaxy Grand Prime
- Samsung Galaxy S4 Mini Value Edition
[ci:ignore-count]
[ci:skip-build]: already built successfully in CI
Add rt5033 modules to initfs for the following devices, to unlock FDE with
USB OTG keyboards:
- Samsung Galaxy A3/A5/A7
- Samsung Galaxy E7
- Samsung Galaxy Grand Max
