- The 3 different variants of the lt01 will be merged into a single
main device package, so the old package is deprecated.
- We will now be using the mainline kernel, so the downstream kernel is
no longer necessary.
- Add a patch to fix a new build error.
The binaries are the same as for the other devices, we just need to add three
new NVRAM TXTs, so add them here since they don't make the package that much
larger.
eg25-manager is supposed to watch for the modem going away and recover it
automatically, but it doesn't seem to actually do anything.
Manually restarting eg25-manager in this situation does recover the modem.
This upstream issue https://gitlab.com/mobian1/eg25-manager/-/issues/47
is probably the same, and as that issue says, manually restarting eg25-manager
in this situation does recover the modem.
So this change adds a udev rule to automatically restart eg25-manager when
the modem dies. Common triggers for the modem dying are:
1. When the phone wakes up from suspend.
2. When an incoming call is disconnected, especially if the disconnect happens
very quickly after the call started, such as what happens when
phosh-antispam identified the call as spam.
3. When plugging or unplugging the phone from USB power, and when plugging
or unplugging other USB devices like keyboard from a connected dock.
udev shouldn't be used for spawning long-lasting processes,
but `rc-service start` will parent the process to the service manager and exit,
so that's fine. It does take a few seconds during which udev is blocked and
can't process other events, which udev also recommends against,
but in this case it's not a big deal IMO.
Fixes#2641
[ci:skip-build]: already built successfully in CI
The data is not 100% accurate, but it's the best I've got
and it makes the device usable, which it currently isn't.
Closes: https://gitlab.com/postmarketOS/pmaports/-/issues/2647
Signed-off-by: Andrea Bolognani <eof@kiyuko.org>
GTK4 has switched to a new renderer. Unfortunately adreno a306 is
effectively abandoned in mesa and has many bugs which the new GTK
renderer now hits.
To allow us to still use GTK4 apps on the msm8916 based devices, force
the old renderer on them for now.
Fixes: #2681
[ci:skip-build]: already built successfully in CI
I contribute to this package from time to time, so let's add myself to
maintainers to represent it here.
[ci:skip-build]: already built successfully in CI
This upgrades kernel to 6.6.22 backporting fixes for major performance
issues of Microsoft Surface RT.
This also re-generates config with "make grate_defconfig pmos.config"
and adds pmb:kconfigcheck-uefi for surface rt.
Now as boot-deploy allows us to generate both boot.img and extlinux.conf
at the same time, enable generating the config for all msm8226 since it
will be used in the future lk2nd release. boot.img is still kept to keep
compatibility with current lk2nd releases and to allow system recovery
with fastboot when required.
[ci:skip-build]: already built successfully in CI
pmOS does not support charge mode anyway, and boots to a full UI, but this vendor kernel disables touchscreen when booting in charge mode. Remove that check, so that the phone can be used as usual.
[ci:skip-build]: already built successfully in CI
Current 6.6 kernel has some features broken for xiaomi-polaris including
LCD and Wi-Fi.
Add two patches that fix these problems.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
[ci:skip-build]: already built successfully in CI
- kconfig changes from `pmb kconfig migrate`
- also enabled some USB serial drivers I wanted
- Reverts 7dcd3e014aa7, fixing bluetooth connections. This commit was
added after 6.8-rc6 and causes a regression. A revert was sent
upstream: https://lore.kernel.org/all/ZfMStHjwtCT1SW3z@hovoldconsulting.com/
[ci:skip-build] already built successfully in CI
A number of fixes:
- oem-amd-nonfree-fw no longer exists from c6306cb9b, and the fw here is
pretty much required for the device to be useful so it's added to
"depends=".
- drops the -vulkan subpackage since oem-amd-vulkan is doing the same
thing.
- force rootfs partition resize on boot, else the rootfs is too small
- disable unudhcpd, usb networking isn't working, and we don't need to
run it on any dedicated eth device
- use kernel with Valve's out of tree patches, to improve stability /
usefulness of device
fixes#2630
[ci:skip-build] already built successfully in CI
There are some important platform drivers that Valve has not upstreamed,
that are basically required for this device to operate well. I picked
those patches from the kernel tree they released for 6.5, and rebased
them onto 6.8.
Our config.txt is replaced (mv'ed to config.txt.old, maybe by alpine's
initramfs-generator?) and so our configuration does not have an
effect. Put our config stuff in usercfg.txt instead, which is included
by config.txt.
Fixes: https://gitlab.com/postmarketOS/pmaports/-/issues/2471
[ci:skip-build]: already built successfully in CI
Our config.txt is replaced (mv'ed to config.txt.old, maybe by alpine's
initramfs-generator?) and so our configuration does not have an
effect. Put our config stuff in usercfg.txt instead, which is included
by config.txt.
Also update vmlinuz name, should be vmlinuz-rpi and not vmlinuz-rpi4.
Name of package in aports is linux-rpi these days. linux-rpi provides
linux-rpi4 for backward compatibility, so depending on linux-rpi4
still works, but lets use real package name so that it is easier to
find.
These are now provided by linux-firmware-brcm, which subsequently causes
a conflict between these packages. Fix it by removing the symlinks from
the device package.
Closes https://gitlab.com/postmarketOS/pmaports/-/issues/2616
[ci:skip-build]: already built successfully in CI
Changes:
- use msm-firmware-loader
- use soc-qcom-msm8953
- cleanup firmware package
- add tqftpserv as a dependency for modem
- add modules-initfs with panel and touchscreen modules
[ci:skip-build]: already built successfully in CI
Since kernel 6.5 (I believe) the ucm config
need to be adjusted because the mic way too
sensitive. The other party hears a freight
train riding rails that are almost
perpendicular ...
This is an attempt to get the mic to work nicely.
[ci:skip-build]: already built successfully in CI
Unfortunately we cannot get to a getty shell unless we also run:
setenv SWITCH_SEL 3
from the SBL shell. Furthermore, actually getting kernel output
requires setting console=ttySAC2,115200.
SWITCH_SEL might be related to the "MUIC" of the device, but the
variable also controls whether or not it is possible to get serial
output from pads on main board, and seems weird that those pads are
affected by MUIC (unless pads are also behind MUIC, but seems like
that would be very annoying when developing the device)
See also initial MR where mainline support for i9100 was added, where
serial output is also discussed:
https://gitlab.com/postmarketOS/pmaports/-/merge_requests/1598#how-to-get-serial-output
[ci:skip-build]: already built successfully in CI
Added postmarketos-base-downstream and msm-fb-refresher to jxelte
dependencies.
The modules_install and firmware_install targets install binary
files as the zram files among others.
Added the 'mfc_fw.bin' binary to be installed from the firmware
package.
The '0002-fix-usb-gadget-random-mac.patch' patch make it possible
to get ethernet over usb, and the 'disable-charging-bootmode.patch'
avoid error messages on dmesg about 'sec_battery_probe'.
[ci:skip-build]: already built successfully in CI
Fix incomplete commit ecc91098a9 that
was missing the dependency on
"postmarketos-base-downstream-disable-udev-v4l".
Fix MR !4768
[ci:skip-build]: already built successfully in CI
This fixes building for linux-lg-vee7e, and adds a shared patch.
The shared patch replaces the "Solaris style flags" in piggy.gzip.S
[ci:skip-build]: already built successfully in CI
Commit fe54a7be4 ("device/msm8916*: Generate extlinux.conf (MR 4826)")
updated most users of msm8916 kernel to generate extlinux.conf.
Unfortunately the commands used to bulk-make changes only affected
aarch64 users of the kernel package and armv7 users were missed.
Apply the same changes to all armv7 users of msm8916 kernel too.
[ci:ignore-count]
This p4412_s_f2bl1.bin is signed by Samsung and allegedly originates
from a vendor bsp package for one of the early odroid devices based on
exynos 4412. Unlike most bl1 blobs this one does not check the
signature of bl2, allowing us to use open bootloaders like u-boot
instead of Samsung's proprietary sboot.
This installs all linux-firmware by default (using pmb_recommends) in a
way that allows for users to remove extraneous fw if they want.
The old `nonfree-firmware` packages have been dropped since pmbootstrap
no longer conditionally installs these.
[ci:skip-build]: already built successfully in CI
This switches from 6.1 LTS to 6.6 LTS.
Unfortunately, this version has regressions related to SPI (breaks keyboard)
and DRM (breaks display). Thus adding patches to revert these regressions.
Hopefully, these will be properly fixed until the next LTS release.
This also makes it pass community kconfig check again.
[ci:skip-build]: already built successfully in CI
- Fixes FDE unlocking on devices with usb keyboards
- Also drops the i915 module from the initfs, this is specified by the
oem-intel package now
[ci:skip-build] already built successfully in CI
On HTC devices with S-On still active, the 'userdata' partition
is not writable. Change the default rootfs partition to the
'system' partition, which is writable.
Now as boot-deploy allows us to generate both boot.img and extlinux.conf
at the same time, enable generating the config for all msm8916 since it
will be used in the future lk2nd release. boot.img is still kept to keep
compatibility with current lk2nd releases and to allow system recovery
with fastboot when required.
[ci:skip-build] already built successfully in CI
[ci:ignore-count]
* Depend on the common soc-qcom-sm7150 package
* Set console=null in cmdline
* Add touchscreen firmware to initramfs
* Add required modules for touchscreen to modules-initfs
* Panel output works, drop phoc.ini
* Switch maintainer and co-maintainer
* Bump pkgrel to 1.2
Signed-off-by: Jens Reidel <adrian@travitia.xyz>
hwclock default configuration is to use the S3C RTC, which is mapped to
/dev/rtc0. However, reading from this clock fails with the following
kernel message:
"s3c-rtc 101e0000.rtc: hctosys: unable to read the hardware clock"
and the time as boot is then always set to 1/1/1970.
This commit change the default RTC to the MAX77686 one (mapped to
/dev/rtc1), that does not suffer from this issue.
Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>
The adjustments made by this script are unnecessary now that the device
runs a mainline kernel, and more importantly the brcmfmac driver (as
opposed to the bcmdhd driver used in the vendor kernel).
Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>
With the pmbootstrap change let's change the deviceinfo variable names
to the non-deprecated version.
[ci:ignore-count]
[ci:skip-build]: already built successfully in CI
This commit also removes librecomputer-solitude/alta device tree patches
as they're now upstream.
Signed-off-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
[ci:skip-build]: already built successfully in CI
