Fixes 'pmbootstrap flasher boot' for fastboot devices. This is probably
not used as often as 'pmbootstrap flasher flash_*', so I'm not enforcing
the upgrade by modifying pmaports.cfg this time.
We'll switch from whatever version of shellcheck is packaged in Debian
stretch to the newer version in Alpine edge in the next commit. Adjust
postmarketos-mkinitfs first, so it doesn't report any errors.
Also removed the explicit depends on telepathy-mission-control, as that
was already picked up by abuild with the soname
[ci:skip-build]: already built successfully in CI
This MR enable the new CONFIG_SND_SOC_NOKIA_RX51 kernel option which
replaces the old CONFIG_SND_OMAP_SOC_RX51, enabling the audio on the
N900 again (just tested).
[ci:skip-build]: won't finish in time
Rebuild all other GCC packages against mpfr4, so they don't fail with:
Error loading shared library libmpfr.so.4: No such file or directory (needed by /usr/gcc4/libexec/gcc/x86_64-alpine-linux-musl/4.9.2/cc1)
[ci:skip-build]: won't finish in time
Related: 2b32ed3a48786fa151cad8f920e5d9997bee94ed in Alpine's aports.git
* Added display in final pinephone to the kernel
* Added getty
* Use RGB led to signify booting status in u-boot
* Enable CONFIG_GPIO_SYSFS
[ci:skip-build]: won't finish in time
Seems like VIA/Wondermedia 8850 devices do not boot with the default
address. Add new deviceinfo_legacy_uboot_load_address variable to
allow setting a custom one.
[ci skip] Package output does not change except for meta
information (licenses), so don't build or verify checksums
of the packages to prevent outdated source URL's breaking it.
This will have to be looked at later
A Wayland kiosk. Works in Wayland (tested in weston), X11 (tested in
i3wm) and tty. Works with both dri-virtio and dri-swrast, but I won't
recommend you running with swrast because it's veeeeery slow.
[ci:skip-build]: already built successfully in CI
Previously, running reboot-mode as an unprivileged user resulted in
Error: No error information
without a newline at the end. According to SYSCALL(2), the return value
of -1 indicated an error, but the actual error code is stored in errno.
The DRM module itself can not do anything without a DRM driver.
It just takes up precious space (about ~5 MB for aarch64)
on the boot partition.
Devices that do include the appropriate DRM driver via
deviceinfo_modules_initfs will automatically pull in
"drm" and "drm_kms_helper" as dependencies, if needed.
So there is no need to depend on it explicitly.
Use deviceinfo_framebuffer_landscape during splash screen generation.
Also add the postmarketos-splash arguments variable to the computation
of the hash for the cache.
Adjust device-pine-pinetab to use the new variable, and therefore rotate
its splash screen.
[ci:skip-build]: already built successfully in CI
kirigami-gallery is not meant for users, but it is good testing
application and is even part of reference image provided by Plasma
Mobile team.
For now we are not targetting plasma-mobile towards users anyway and
only developers, so include kirigami-gallery in main UI package.
Currently we rely on the fact, that the kernel asks user space to load
the firmware for it, so we can use the /lib/firmware/postmarketos
directory for firmware.
As the kernel has support for loading the firmware itself since
v3.7, and the parameter for adding an additional path to the search
paths was added with v3.10, we can use that to not rely on
CONFIG_FW_LOADER_USER_HELPER being set.
Update to the 5.2 kernel plus my patches for the Nexus 5 display that
will also work for other msm8974-based systems:
https://github.com/masneyb/linux/commits/v5.2-nexus5-display. There's
currently 25 extra patches on top of 5.2:
- The first 9 patches after the 5.2 commit are currently in 5.3rc1 and
were back ported to 5.2. All of these patches have 'Commit XXX
upstream.' messages in the commit message.
- The next 9 patches are for ocmem support and some msm display fixes. I
expect that these will be merged upstream for 5.4rc1.
- The remaining 7 patches are still not suitable to send upstream.
[ci:skip-build]: already built successfully in CI
I've ordered the $depends list alphabetically for better readability,
and added the bluedevil (for Bluetooth) kwallet-pam and
xdg-desktop-portal-kde runtime dependencies.
[ci:skip-build]: already built successfully in CI
As Idan Horo wrote in osk-sdl!82:
"Newer versions of cryptsetup automatically encrypt with LUKS v2.
osk-sdl assumes all partitions are encrytped with v1 and as such fails.
By just changing the encryption type to NULL cryptsetup automatically
detects and chooses the correct LUKS version. Tested on xiaomi-kenzo."
Fix wifi on htc-ace by properly setting nl80211 before wext.
/etc/conf.d/wpa_supplicant is supposed to get modified twice with the
current code in the post-install file. The first one was patched
recently to set nl80211 before wext, but that change does not work in
practice, for two reasons:
1. The code block does not even get executed, because apk reports that
/etc/conf.d/wpa_supplicant was already modified (by a package that
was installed before, in its post-install script? I could not find
out which one does that though).
2. Even if it worked, the second code block would revert the change and
put wext before nl80211 again.
Fix this by removing the first code block, and changing the order in the
second one. Make it easier to catch such errors in the future, by
printing, which files get modified, or get skipped. Set "#!/bin/sh -e",
so the script can not fail silently.
When doing pmbootstrap -y zap and then pmbootstrap install, the output
looks like this:
(141/151) Installing postmarketos-base (3-r26)
Executing postmarketos-base-3-r26.post-install
- Modifying: /etc/fstab
- Modifying: /etc/issue
- Modifying: /etc/motd
- Modifying: /etc/conf.d/syslog
- Modifying: /etc/conf.d/wpa_supplicant
- Modifying: /etc/sudoers
- Modifying: /etc/chrony/chrony.conf
This adds a seperate dts for the longts version of the devkit (which was
the un-inverted version before) and adds a shortts version which was
inverted before, but didn't exist in pmaports yet because I manually
edited the dts for every release.
This MR abuses the kernel switching feature to switch the dtb instead so
shortts/longts can be selected in the init step.
[ci:skip-build]: build won't finish in time
An SMS application for Plasma Mobile, finally!
Please note that it's still in development, and it doesn't work
flawlessly yet. For example new chats can't be initiated, someone else
has to send an SMS to you first before you can send an SMS back.
However, with this application basic phone functionality should work
with Plasma Mobile. I'll keep it up-to-date while it develops, just like
the other to-be-released Plasma Mobile applications we already package
(e.g. Plasma Camera).
[ci:skip-build]: already built successfully in CI
[ci:skip-vercheck]
* Added --skip option to skip specific tests
* Allow skipping broken inputs in interactive mode with ctrl+c
* Added basic modem test that lists modems in ofono
* Added audio test based on alsabat
* Added pressure sensor support
* Fixed temperature calculations
Use the start_weston.sh wrapper script again, and make it work with
lightdm. It makes custom weston configs possible, and allows starting
postmarketos-demos together with weston. The custom config logic uses a
default config from postmarketos-ui-weston unless it is overwritten
with a device specific config. Our default configs use fbdev in most
cases, as this is not the case since the change to lightdm, weston was
broken for most devices with downstream kernels, that only work with
framebuffer.
Lastly, set myself as maintainer for this UI. Resolves#289
Ollieparanoid extended this patch and made sure that this boots up
weston on the samsung-i9100 again.
When the UI package is reinstalled (due to the package being recompiled
or upgraded), it runs $pkgname.post-upgrade instead of
$pkgname.post-install which would run the sed replacement LightDM
autologin. This will cause LightDM to show the greeter when the UI
package is rebuilt, and the user ran pmbootstrap install without
deleting the old chroot.
Signed-off-by: Asriel Dreemurr <asriel.danctnix@gmail.com>
Reviewed-by: Danct12 <danct12@disroot.org>
Signed-off-by: Danct12 <danct12@disroot.org>
We don't need to append the dtb to the kernel image in all cases, with
e.g. the u-boot bootloader we can load the dtb seperately from the
kernel image. Introduce a new variable deviceinfo_append_dtb, if set to
"true", append the dtb, otherwise just copy the dtb file to the boot
partition.
Fixes#260
[ci:ignore-count]
A framebuffer console plus gesture recognition UI option. Tested locally
building and on nexus 5. The power key works fine for me and the freeze
after sitting for about 5 minutes still happens for me but I don't
consider that necessarily a shelli bug, maybe the code needs to feed a
watchdog or something.
This adds the first interactive tests for inputs, interactive tests are
only run when specifying --interactive/-i. This also adds --export and
--verify. The export option will write the test results to an .ini file.
The verify option will run the tests and compare it to the saved export
and then will show a diff of hardware functionality.
Move Wayland meta packages to LightDM and replace ConsoleKit2 for
elogind for Plasma.
Now we don't need the hacky scripts in /etc/profile.d anymore!
This change requires elogind for both Weston and Plasma Mobile. Using
elogind allows us to use one patch less in kwin. Weston has logind
(which elogind provides) support disabled in Alpine Linux, so I put the
package in temp/ with it enabled for now, but will upstream this change
to Alpine.
Remove consolekit2 dependency in postmarketos-ui-xfce4.
[ci:skip-build]: already built successfully.
- main: postmarketos-mkinitfs: Add /run
Create the /run directory in the initramfs so that cryptsetup doesn't
crash on not being able to create /run/cryptsetup for lockfiles
- device: pine-dontbeevil: Remove workaround for touchscreen
- main: linux-postmarketos-allwinner: Implemented supplies for touchscreen
This uses a slightly newer commit from the kernel repo that implements
requesting a regulator in the touchscreen driver
- device: pine-dontbeevil: Remove ethernet from initramfs
This actually makes debugging more complicated since networkmanager wont
touch the ethernet adapter afterwards and the initramfs can be debugged
over uart
- temp/u-boot: sync APKBUILD with upstream and update to 2019.04
- main: linux-postmarketos-allwinner: Use 20190521 git version
Currently we're using matchbox-keyboard as on screen keyboard. However,
onboard seems to be a better alternative to, it has auto-show, word
suggestions, themes and settings you can choose. So far the best OSK out
there on the market.
There are a few minor issue such as word suggestions doesn't work (not
sure why, but i assume that onboard doesn't know about the program that
was in front of it), sound feedback doesn't work at all due to missing
sound despite it exists in
/usr/share/sounds/freedesktop/stereo/onboard-key-feedback.oga. Other
than that, I haven't found any issue while testing.
Tested on qemu-amd64.