- usbguard config: these are builtin USB devices that should be allowed
by default
- removed nonfree-fw package, I decided that everything from that should
be required since some fairly major features are broken without these
firmwares and relevant userspace apps
- re-enabled EFI runtime services, so efifb is used (and probably other
benefits?)
- Laptops need the "Linux Boot" option enabled
- "With recent UEFI firmware efi=noruntime can be left out when
the Linux Boot option is enabled."
- https://github.com/jhovold/linux/wiki/X13s#kernel-command-line
[ci:skip-build]: already built successfully in CI
It seems that wireplumber is now installed by default, instead of pipewire-media-session. Thus we need to set api.alsa.headroom in wireplumber configuration too to get working audio.
This basically copies /usr/share/wireplumber/wireplumber.conf.d/alsa-vm.conf and relaxes the filters.
[ci:skip-build]: already built successfully in CI
exkc has stated that he cannot maintain the ports anymore,
see #postmarketos-devel discussion:
<@f_[xmpp]> af2e02839bcfb0aae789a9ea66f63a: hiya, are you available?
<@f_[xmpp]> It's about 2 of your Amlogic device ports. You said
before that your beelink-gt1 and xiaomi-once were broken
<@f_[xmpp]> are you still able to maintain these ports?
<@f_[xmpp]> If not then they should probably be dropped.
<af2e02839bcfb0aae789a9ea66f63a> drop them
<@f_[xmpp]> af2e02839bcfb0aae789a9ea66f63a: sure
[ci:skip-vercheck]
Suggested-by: exkc <exxxxkc@getgoogleoff.me>
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Add support for Sony Xperia Z3 Compact and HTC One (M8).
Also take the opportunity to align the LOCALVERSION/KBUILD_BUILD_VERSION
fields with e.g. SC7280 kernel.
[ci:skip-build]: already built successfully in CI
Add deviceinfo variables so that QCDT generation is carried out by
boot-deploy. The mainline kernel no longer generates the QCDT image
for the device.
[ci:skip-build]: already built successfully in CI
Upgrade the kernel to version 6.8.1.
Move the devicetrees to be built in-tree. This enables better
integration of the devicetree sources with the kernel, such as being
able to access macros available in include/dt-bindings.
Additionally, remove QCDT generation from the kernel. This is required
for supporting multiple devices, having different QCDTs. It can instead
be done in a per-device basis using boot-deploy.
[ci:skip-build]: already built successfully in CI
The China LTE versions of Samsung Galaxy S5 (G9006[VW]/G9008[VW]/G9009W) have
some little hardware difference with the G900F variant.
Add kernel variants, with klte variant for G900F (which is currently
supported) and kltechn variant for G9006/G9008/G9009W (newly added).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
The modem requires firmware to be loaded from an on-device RADIO partition, samsungipcd does that. Not installing it prevents that firmware from being used.
[ci:skip-build]: already built successfully in CI
With the new changes in lk2nd that allow us to support extlinux.conf and
with the U-Boot support with EFI, we can now generate image that would
be generic to these devices.
[ci:skip-build]: already built successfully in CI
This new package covers all three variants of the tablet: the WiFi
version (SM-T310), the 3G version (SM-T311) and the LTE version
(SM-T315). It uses the linux-postmarketos-exynos4 kernel, like other
mainlined Exynos 4 devices.
- The 3 different variants of the lt01 will be merged into a single
main device package, so the old package is deprecated.
- We will now be using the mainline kernel, so the downstream kernel is
no longer necessary.
- Add a patch to fix a new build error.
Now as boot-deploy allows us to generate both boot.img and extlinux.conf
at the same time, enable generating the config for all msm8226 since it
will be used in the future lk2nd release. boot.img is still kept to keep
compatibility with current lk2nd releases and to allow system recovery
with fastboot when required.
[ci:skip-build]: already built successfully in CI
pmOS does not support charge mode anyway, and boots to a full UI, but this vendor kernel disables touchscreen when booting in charge mode. Remove that check, so that the phone can be used as usual.
[ci:skip-build]: already built successfully in CI
- kconfig changes from `pmb kconfig migrate`
- also enabled some USB serial drivers I wanted
- Reverts 7dcd3e014aa7, fixing bluetooth connections. This commit was
added after 6.8-rc6 and causes a regression. A revert was sent
upstream: https://lore.kernel.org/all/ZfMStHjwtCT1SW3z@hovoldconsulting.com/
[ci:skip-build] already built successfully in CI
A number of fixes:
- oem-amd-nonfree-fw no longer exists from c6306cb9b, and the fw here is
pretty much required for the device to be useful so it's added to
"depends=".
- drops the -vulkan subpackage since oem-amd-vulkan is doing the same
thing.
- force rootfs partition resize on boot, else the rootfs is too small
- disable unudhcpd, usb networking isn't working, and we don't need to
run it on any dedicated eth device
- use kernel with Valve's out of tree patches, to improve stability /
usefulness of device
fixes#2630
[ci:skip-build] already built successfully in CI
There are some important platform drivers that Valve has not upstreamed,
that are basically required for this device to operate well. I picked
those patches from the kernel tree they released for 6.5, and rebased
them onto 6.8.
Our config.txt is replaced (mv'ed to config.txt.old, maybe by alpine's
initramfs-generator?) and so our configuration does not have an
effect. Put our config stuff in usercfg.txt instead, which is included
by config.txt.
Fixes: https://gitlab.com/postmarketOS/pmaports/-/issues/2471
[ci:skip-build]: already built successfully in CI
Our config.txt is replaced (mv'ed to config.txt.old, maybe by alpine's
initramfs-generator?) and so our configuration does not have an
effect. Put our config stuff in usercfg.txt instead, which is included
by config.txt.
Also update vmlinuz name, should be vmlinuz-rpi and not vmlinuz-rpi4.
Name of package in aports is linux-rpi these days. linux-rpi provides
linux-rpi4 for backward compatibility, so depending on linux-rpi4
still works, but lets use real package name so that it is easier to
find.
These are now provided by linux-firmware-brcm, which subsequently causes
a conflict between these packages. Fix it by removing the symlinks from
the device package.
Closes https://gitlab.com/postmarketOS/pmaports/-/issues/2616
[ci:skip-build]: already built successfully in CI
Changes:
- use msm-firmware-loader
- use soc-qcom-msm8953
- cleanup firmware package
- add tqftpserv as a dependency for modem
- add modules-initfs with panel and touchscreen modules
[ci:skip-build]: already built successfully in CI
Unfortunately we cannot get to a getty shell unless we also run:
setenv SWITCH_SEL 3
from the SBL shell. Furthermore, actually getting kernel output
requires setting console=ttySAC2,115200.
SWITCH_SEL might be related to the "MUIC" of the device, but the
variable also controls whether or not it is possible to get serial
output from pads on main board, and seems weird that those pads are
affected by MUIC (unless pads are also behind MUIC, but seems like
that would be very annoying when developing the device)
See also initial MR where mainline support for i9100 was added, where
serial output is also discussed:
https://gitlab.com/postmarketOS/pmaports/-/merge_requests/1598#how-to-get-serial-output
[ci:skip-build]: already built successfully in CI
Added postmarketos-base-downstream and msm-fb-refresher to jxelte
dependencies.
The modules_install and firmware_install targets install binary
files as the zram files among others.
Added the 'mfc_fw.bin' binary to be installed from the firmware
package.
The '0002-fix-usb-gadget-random-mac.patch' patch make it possible
to get ethernet over usb, and the 'disable-charging-bootmode.patch'
avoid error messages on dmesg about 'sec_battery_probe'.
[ci:skip-build]: already built successfully in CI
Fix incomplete commit ecc91098a9 that
was missing the dependency on
"postmarketos-base-downstream-disable-udev-v4l".
Fix MR !4768
[ci:skip-build]: already built successfully in CI
This fixes building for linux-lg-vee7e, and adds a shared patch.
The shared patch replaces the "Solaris style flags" in piggy.gzip.S
[ci:skip-build]: already built successfully in CI
Commit fe54a7be4 ("device/msm8916*: Generate extlinux.conf (MR 4826)")
updated most users of msm8916 kernel to generate extlinux.conf.
Unfortunately the commands used to bulk-make changes only affected
aarch64 users of the kernel package and armv7 users were missed.
Apply the same changes to all armv7 users of msm8916 kernel too.
[ci:ignore-count]
