Now that touchscreen driver is supported in kernel, include the module
in initfs so it's available there.
[ci:skip-build]: Already built successfully in CI
Remove mainline postfix in initramfs module list,
because sagit has only 1 kernel for now.
Blacklisting ipa module fixes poweroff.
See 68cdc1ea2b commit for more info.
[ci:skip-build]: already built successfully in CI
This is an early mainline port for the MediaTek MT6763 Helio P23 SoC
that just about boots in about 3 minutes with one core online, logs on
display (simplefb) or UART serial console and USB gadget mode
facilitating netbooting postmarketOS while tethered via RNDIS.
This contains a fix for second panel variant for samsung-hlte.
No more manual changes, .config was regenerated using kconfig migrate.
[ci:skip-build]: already built successfully in CI
This is an incomplete port but it has greater functionality than the existing downstream based one, which has been moved to unmaintained.
[ci:skip-build]: Already built successfully in CI
There are 2 panel variants supported:
- panel-samsung-hx8389c-gh9607501a
- panel-samsung-s6d78a0-gh9607501a
Add both of them to enable panel display during splash and FDE.
Note that fortunaltezt has only one panel variant so it's not included.
[ci:skip-build] already built successfully in CI
Device uses mainline kernel. What works:
- boots
- display
- touchscreen
- wifi
Also add firmware package
[ci:skip-build]: already built successfully in CI
New features for google-sargo:
- GPU acceleration
- Bluetooth
- Haptics (currently only rumble effect)
- Video acceleration (still untested)
- NFC (only detection was tested)
Certain newer hardware may require a newer kernel than the current
lts in order to work.
Change-Id: Iae0d91f8bf8d1b8516698841895f942e527b0813
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: already built successfully in CI
Remove the -dev subpackages of kernels that replace the linux-headers
package. As I understand, the only case where this would make sense is
if you wanted to build a kernel module against headers that need to be
newer than the headers in Alpine's linux-headers package (currently
5.19.5).
While this might have been historically relevant when wireguard wasn't
in the kernel and you might have needed newer linux-headers to build
the module, it seems irrelevant today. If somebody should need this in
the future, then bring it back properly / consider getting the
linux-headers package in Alpine upgraded. Right now the -dev packages
are broken in several ways:
* Use of unversioned provides= (pma#1766)
* Don't contain binaries needed to build binary packages (pma#462).
This was worked around in 6aba5f ("Package kernel-scripts
separately"), but later this didn't build anymore and we removed it.
So in short: broken and unused, drop them.
RootFS cannot be flashed on this devices since Samsung uses a different sparse format.
Enable this in the deviceinfo file to allow flashing the rootFS.
[ci:skip-build]: already built successfully in CI
Additionally switch mainline kernel from qcom_fg to bq27xxx_battery_i2c.
While at it simplify the deviceinfo_modules_initfs_alpine list to
exclude implicit dependencies that mkinitfs can find itself to make the
line length a bit less unwieldy.
[ci:skip-build] Already built successfuly on CI in MR
Additionally switch mainline kernel from qcom_fg to bq27xxx_battery_i2c
and probe the correct panel driver, this was a regression that came from
the initial linux-edge enablement MR.
While at it simplify the deviceinfo_modules_initfs_alpine list to
exclude implicit dependencies that mkinitfs can find itself to make the
line length a bit less unwieldy.
While this provides the ability to use ModemManager, there are quite a
lot of issues with the driver still; keep it enabled in kernel for now
and let users "modprobe ipa" if they want to test modem features
whichever side effects that may cause including:
- Making the device nearly impossible to poweroff or reboot
- Making the UI lag noticeably more due to some interconnect bandwidth
issues
While this provides the ability to use ModemManager, there are quite a
lot of issues with the driver still; keep it enabled in kernel for now
and let users "modprobe ipa" if they want to test modem features
whichever side effects that may cause including:
- Making the device nearly impossible to poweroff or reboot
- Making the UI lag noticeably more due to some interconnect bandwidth
issues
The qca (Bluetooth) and qcom (non-zap GPU) firmware blobs don't need to
be signed by the OEM, so let's use upstream versions to benefit from
fixes and updates done there.
The soc-qcom-sdm845* packages are mostly sufficient, but there are a few
issues that all MSM8998 devices on mainline will face, so include
workarounds for them in a generic package all device pkgs can depend on.
Kernel doesn't compile anymore, and it doesn't seem worth fixing it
again. The kernel has been added in 2017 as a stock mainline kernel from
that time with only two patches and wasn't maintained since then,
looking at git log --follow it was only patched to fix it up when
it didn't build.
As the device is a generic x86_64 tablet: if somebody has that
particular device, try to get the generic device-tablet-x64uefi running
instead.
Patch header for 0027 was not formatted correctly. Fix that and
re-generate all other patches while we are at it.
[ci:skip-build] Already built successfuly on CI in MR
Also:
Fix camera on google-snow.
Enable video decoder.
Make boot.img smaller making kernel more modular and making FS-related
modules =y instead of =m (built-in file systems consume less space
than initramfs modules).
Reverts commit 70efe55031 for kernels that
started failing on bpo. I suspect it's caused by a change in binutils,
since I tried building linux-oneplus-billie2 with gcc6 and got the same
error (after trying other workarounds like disabling selinux for it, but
then it failed elsewhere).
We previously installed dtbs outside of the boot partition, so it
was necessary to copy them from the root partition to boot if you
wanted to utilise them in U-Boot scripts. This is no longer
necessary as we now install dtbs to the boot partition directly, so
remove this workaround and edit the U-Boot script to reflect the
change.
This device package represents several devices, so use plural form in
pkgdesc of APKBUILD:
pkgdesc="Google Hana Chromebooks"
However, when deviceinfo is already installed, it is intended to represent
only current device, so use singular form here:
deviceinfo_name="Google Hana Chromebook"
Mesa behaves again, #1658 is fixed, so lets re-revert MR 3306.
Lets also add the dependency to the other devices using the same
graphics driver.
[ci:skip-build] Already built successfuly on CI in MR
- silence the wifi a bit, it really provides an enormous amout of spam
- enable pxp mem2mem video converter
[ci:skip-build] Already built successfuly on CI in MR
This isn't really a fix, but the device's framebuffer has only one mode and it's enough to get Xorg up and running.
[ci:skip-build]: already built successfully in CI
Add msm8939 SoC package to be used in addition to soc-qcom-msm8916.
For now it provides a shell script setting FD_MESA_DEBUG=nobin env var
to work-around graphical corruption seen on adreno 405 devices.
Upgrade to fresh Linux release.
Enable more features in kernel from pmbootstrap kconfig check:
anbox, containers, iwd, nftables, zram.
Disable CONFIG_REGULATOR_DEBUG to reduce dmesg spam.
DRM and PANEL_SIMPLE are now built-in (DRM_MSM is still "m").
Switch to framebuffer from SIMPLEFB to tinydrm (SIMPLEDRM=y).
Switch APKBUILD to use "make zinstall" approach.
(Device packages might need small adjustments to initfs modules list.)
Add support for next devices:
- Asus Eee Pad Transformer TF101 and TF101G
- Asus Eee Pad Slider SL101
- Asus Transformer Prime TF201
- Asus Transformer Pad TF300T/TF300TG/TF300TL
- Asus VivoTab RT TF600T (Windows RT based)
- Asus Transformer Infinity TF700T
- Asus Transformer AiO P1801-T
- Asus Transformer PAD TF701T
- Pegatron Chagall based devices
Package has no dependencies.
Signed-off-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Maxim Schwalm <maxim.schwalm@gmail.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Remove as we are removing apparmor check from pmbootstrap
[ci:skip-vercheck] No rebuild necessary
[ci:skip-build]: already built successfully / also not really needed
This is to emphasize the fact that this firmware package will work essentially
unmodified on the samsung-coreprimevelte and other Samsung PXA1908 phones as
well.
The device fulfils the requirements for community category, and I plan
to maintain and develop this device further going forward. Move it!
[ci:skip-vercheck]: linux pkg was moved
[ci:skip-build]: already built successfully in CI
