Since the v6.9 upgrade the kernel supports Type-C functionality for
Fairphone 4, but I forgot to enable the relevant kconfig options then.
Enable them now along with a bunch of options related to USB that come
in useful. Also prepare some options that will be used in the future
with DisplayPort over USB-C (e.g. SBU mux).
[ci:skip-build]: already built successfully in CI
Add the required dependencies and config for both hexagonrpcd and
libssc so that sensors start working.
[ci:skip-build]: already built successfully in CI
The device already loads plenty of nonfree-firmware into the
co-processors during the bootloader stages, and also once booted in
Linux won't really be useful without everything.
Additionally I doubt anyone tests that case, so just require nonfree
firmware unconditionally to simplify maintenance.
This cmdline argument is now a no-op. Drop it everywhere and add a new
CI check to enforce this.
Adjust the deprecated "minimal" initramfs variant to use
pmos.debug-shell to enable logging instead. It doesn't /support/
dropping to a shell, so the variable takes on a different meaning. But
that's ok since it's at least more consistent.
[ci:ignore-count]
[ci:skip-vercheck]
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Tweaked-by: Oliver Smith <ollieparanoid@postmarketos.org>
[ci:skip-build]: kernel builds are very likely to go through now
* drop maxcpus=0, which was added with 73a033328e ("device-nokia-n900: set
uniprocessor mode for kernel (MR 4299)") while troubleshooting. a better
fix was eventually implemented with 3e737241ba ("linux-postmarketos-omap:
N900: disable twl off idle features (MR 4317)")
* drop PMOS_NO_OUTPUT_REDIRECT, which was obsoleted by 7c98127746
("postmarketos-initramfs: switch to udev and kmod (MR 5000)")
commit 933f2b5703 ("device-nokia-n900: improve sxmo-dwm support [MR 5227]")
accidentally removed sxmo lock state initialization. Restore the lock state
initialization
170189393b (device-nokia-n900: add upower support and config (MR 4397) added
an upower config, but did not provide a subpackage to actually install it on
device. Add the needed subpackage.
[ci:skip-build]: already built successfully in CI
(1) the deviceprofile differs from upstream 1.16.3 in the following respects:
(a) -export SXMO_NO_KEYBOARD=1 - allow use of the virtual keyboard
(b) +export SXMO_DMENU_LANDSCAPE_LINES="10"
+export SXMO_DMENU_PORTRAIT_LINES="6" - these two adjust the size of the
displayed dmenu menu.
* NB: All foregoing changes are already merged in sxmo-utils master.
(c) +export SXMO_TOUCHSCREEN_ID="TSC2005 touchscreen" - allows sxmo to
reliably toggle touch screen's enabled status
* The foregoing change is awaiting acceptance by upstream.
(2) The start hook differs from upstream 1.16.3 by the removal of the line that
starts conky. That program pegs N900 CPU usage at 100% all the time. This
change is not upstreamable, at least not for the time being
With the current kernel, ds2482 w1<>i2c module is not automatically
loaded at boot, which prevents loading the ds2784 battery module.
Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>
[ci:skip-build]: already built successfully in CI
This fixes op6 display panel support, drm error spam in dmesg, and
various other minor things.
It also enabled dynamic debugging and ftrace.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
These modules are required in the initramfs when booting a kernel that
builds them as modules (i.e. not builtin)
[ci:skip-build] already built successfully in CI
Since 6.10-rc1 python3 is now a hard requirement to compile the kernel,
it's used to generates headers for drm/msm. Add it now so our CI can
keep working.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
And remove the compatibility symlinks again, all kernels running now
should use the .mbn files already.
[ci:skip-build]: already built successfully in CI
