Increase the timeout for the PartitionJob from 2 min to 10 min, so it
works on the PinePhone Pro with its 128 GiB eMMC.
Related: https://github.com/calamares/calamares-extensions/pull/20
[ci:skip-vercheck]: forked pkg intentionally not having pkgrel=0
PulseAudio is used for handling all audio on postmarketOS.
This also involves Bluetooth audio such as A2DP, HSP and HFP audio.
In the case of HFP/HSP, the HF and AG can interact with each other
through AT commands defined in the Bluetooth HFP 1.8 spec.
This set of patches implements HFP support to allow Bluetooth devices
to accept/reject/hangup calls, dial numbers, DTMF tone generation,
query signal strength, roaming status, service status, AG battery level,
call status, etc.
More details in the upstream MR:
https://gitlab.freedesktop.org/pulseaudio/pulseaudio/-/merge_requests/693
Available in edge for testing this merge request with a broader user
base. Not intended for backporting to stable branches.
[ci:skip-build]: already built successfully in CI
Fix the build failure when built with newer gcc:
../gtk/gtktextsegment.c: In function '_gtk_toggle_segment_new':
../gtk/gtktextsegment.c:433:6: error: array subscript 'GtkTextLineSegment {aka struct _GtkTextLineSegment}[0]' is partly outside array bounds of 'unsigned char[40]' [-Werror=array-bounds]
433 | seg->type = on ? >k_text_toggle_on_type : >k_text_toggle_off_type;
| ^~
Patch source: b4e110920a
The bug that caused us to fork this package has been resolved upstream.
Tested by downgrading FP2 bootloader to a version susceptible to this
bug:
~ # ./fastboot-31.0.0p1-r2 flash boot boot.img
fastboot: error: Couldn't parse partition size '0x'.
~ # ./fastboot-31.0.3p1-r4 flash boot boot.img
Sending 'boot' (11666 KB) OKAY [ 0.367s]
Writing 'boot' OKAY [ 0.276s]
Finished. Total time: 0.670s
Upgrade to latest version and add a backport of the PinePhone keyboard
patch by Undef, which is already merged to upstream master and therefore
will be in the next version.
Adjust the source URL to the same that is in the Alpine APKBUILD.
Keep the RX-51 (Nokia N900) patches for now, but it would be good if we
could upstream/drop them in order to use Alpine's package again in the
near future. Created pmaports issue 1521 for that.
Related: pmaports issue 1515
Co-Authored-By: Oliver Smith <ollieparanoid@postmarketos.org>
Fix for:
missing depend(s): so:libicuuc.so.70
While at it, I've checked if this is the most recent version of this
mobile fork, and what the upstream stance on this is. Meanwhile there's
a feature branch in the official dino.git repository, so I've adjusted
the APKBUILD. The commit is still the same, and apparently upstream
won't merge it, but rather switch the whole application to libadwaita.
Related: https://github.com/dino/dino/issues/178
Related: https://github.com/dino/dino/issues/1182
[ci:skip-build] already built successfully in CI
Helps #1479
The Disable-fullscreen patch from Purism is in principle useful
in mobile, as exiting fullscreen is at least troublesome. However,
the patch has not been upstreamed and, although we could carry it
in alpine for the 42 cycle, the 43 cycle will come with GTK4 support
and the patch will not rebase easily. Therefore, instead of waiting
6 months to drop, lets just drop it now.
[ci:skip-build] already built successfully in CI
Updates the u-boot on the Librem 5 to a branch that is much closer to
mainline u-boot.
- adds support for booting from SD card to the u-boot boot script
- m4 is no longer necessary, at least not right now (may be re-added by
purism in the future for supporting some low power modes)
- adds a patch to enable u-boot console on uart 4 (on the m.2 connector)
for the debug board
- drops the patch to enable efidebug command, this isn't necessary
anymore with mainline u-boot
Co-authored-by: Bart Ribbers <bribbers@disroot.org>
AppStream data for postmarketOS has been removed until the new format
without a double "--" is deployed. Otherwise transition will be a pain
and we would have to take care of it downstream.
Relates #1384
This requires a kernel >=5.15, and uses a better focus implementation
that doesn't require "sudo i2ctransfer"
[ci:skip-build] already built successfully in CI
Depencency chain:
gnome-software -> gnome-softare-plugin-apk -> gnome-software-lib -> gnome-software
is broken.
Application should not depend on its own plugin,
instead plugin should probably be installed using
install_if="gnome-software apk-tools".
This is needed to unblock BPO:
master/x86_64/gnome-software-9999_git20211203-r0.apk (missing depends: gnome-software)
[ci:skip-build] already built successfully in CI
The plugin now is linked dynamically against gnome-software
and pmos fork does not touch the library, only the ui,
so it should be save to drop this fork
This enables an auto-update mechanism on post-upgrade for the u-boot
firmware on the librem 5 and librem 5 devkit. This mechanism is largely
copied from the implementation in the pinephone u-boot package.
efidebug is useful for booting the kernel via EFI mode in u-boot.
Fix current version of epiphany not being installable because of soname
bump in libportal:
/ # apk add epiphany
ERROR: unable to select packages:
so:libportal.so.0 (no such package):
required by: epiphany-9999_git20210916-r0[so:libportal.so.0]
Upgrade to 41.3 while at it, and drop the firefox sync dialog patch
since it doesn't apply cleanly anymore. Only the disable fullscreen
patch is really important, Pablo only included the firefox sync patch
because it applied cleanly.
This packages the megapixels fork that purism has supporting the librem
5.
The `provides="megapixels"` is there so that apk doesn't try to install
both megapixels and this package side-by-side. If the user explicitly
installs megapixels-purism, apk will remove megapixels first. The
original megapixels is still preferred by apk by default.
[ci:skip-build]: already built successfully in CI
alsa-* 1.2.6 breaks audio switching and microphones on several devices,
with some outstanding issues still open upstream.
This 'fork' is meant to be very short-lived, to restore audio on devices
while we figure out how to fix it on 1.2.6.
see: https://gitlab.com/postmarketOS/pmaports/-/issues/1334
This will be upgraded soon, however let's let this broken URL not block
the initial v21.12 bring up for now. Again, same checksum as the
previous tarball.
For edge we'll probably remove this package and instead Alpine's version
instead. [ci:skip-vercheck]
Upgrade u-boot to the latest in purism's librem5 branch, and use newer
DDR firmware (syncs version with what purism is using)
The patch that was dropped here was merged, so it's not necessary to
carry it anymore.
[ci:skip-build]: already built successfully in CI
Purism's g-c-c fork is stuck in version 3.38. This has
multiple problems, including carrying old unnecessary
patches and producing some incompatibility with newer
GNOME releases available in Alpine. In consequence,
we fetch the source from upstream and only apply those
patches that make sense for our usecase. When the Purism
patches apply without issues, then we fetch them directly
from their repo.
* The first patch has been droped from PureOS, which currently
ships stock debian 0.99.11. Therefore the fix must have been
applied somewhere else, same as it happened with the torch patches.
* The second patch is already merged upstream and present in latest
0.99.13 release in alpine.
With Phosh 0.13.0, Logind is used without patches for the torch
as UPower doesn't want to handle this. Therefore, we can drop
the torch patches to UPower.
[ci:skip-build] already built successfully in CI
I believe everything here has been merged in master, so let's build that
for now (since it includes at least 1 additional fix not in the patches
that were dropped here)
- switch sources to official repo https://source.denx.de/u-boot
- use tag v2021.07
- extract patches from pine64-org
- enable DMA transfers from eMMC and mSD (u-boot from Megi)
[ci:skip-build] already built successfully in CI
This branch includes a patch to resolve a deadlock when Phosh is
starting up. This patch was merged in aports edge.
The rest of the patches in this branch are minor fixes, so I don't
expect any regressions.
fixes#1142
[ci:skip-build] already built successfully in CI
Commits cfb5d41b and ead17254 updated the default battery levels for
warnings and actions in the pinephone and the pinetab. Since then,
the chances of the phone dying for lack of battery power have completely
dissapeared. However, the battery icon in phosh was never updated to show
a "caution" battery level. The value was hardcoded and ignored the setting
in the config file. This commit fixes that issue
* Prevent interactive warning to pop once already approved when
[over/down]clocking DRAM
* Make sure $freq is always set
Co-Authored-By: Oliver Smith <ollieparanoid@postmarketos.org>
This patch fixes:
fastboot: error: Couldn't parse partition size '0x'.
I don't get the bug myself, but it was reported that this works as
expected. Let's merge it to pmaports temporarily while it's getting
upstreamed.
Related: https://github.com/nmeum/android-tools/pull/27
Related: pmbootstrap issue 2007
[ci:skip-build]: already built successfully in CI
uboot-tools is provided by u-boot-tools but sometimes apk still gets
confused. This change prevents errors such as
pine64-pinephone:~$ sudo apk upgrade --verbose
WARNING: Failed to perform initial self-upgrade, continuing with full upgrade.
ERROR: unable to select packages:
uboot-tools (virtual):
provided by: u-boot-tools
required by: device-pine64-pinephone-0.25-r1[uboot-tools]
[ci:ignore-count]
[ci:skip-build]: already built in CI successfully
Latest patches from Purism, including some they backported from
upstream.
fixes#1058
The debian dir was dropped from the archives in this fork repo, but the
number of patches has been dramatically reduced.
A new mechanism (thanks @ollieparanoid) is added here to compare the
list of patches stored in pmaports when this package was upgraded to the
list of patches in purism's repo @ some commit this package uses, so
that any difference can be detected (pacakge will fail to build). If
there's a mismatch, the patches from this repo should be updated/added
to match what's in purism's repo @ the commit, and purism_patches.series
should be updated to match the debian/patches/series file in the purism
repo.
