exkc has stated that he cannot maintain the ports anymore,
see #postmarketos-devel discussion:
<@f_[xmpp]> af2e02839bcfb0aae789a9ea66f63a: hiya, are you available?
<@f_[xmpp]> It's about 2 of your Amlogic device ports. You said
before that your beelink-gt1 and xiaomi-once were broken
<@f_[xmpp]> are you still able to maintain these ports?
<@f_[xmpp]> If not then they should probably be dropped.
<af2e02839bcfb0aae789a9ea66f63a> drop them
<@f_[xmpp]> af2e02839bcfb0aae789a9ea66f63a: sure
[ci:skip-vercheck]
Suggested-by: exkc <exxxxkc@getgoogleoff.me>
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
Add support for Sony Xperia Z3 Compact and HTC One (M8).
Also take the opportunity to align the LOCALVERSION/KBUILD_BUILD_VERSION
fields with e.g. SC7280 kernel.
[ci:skip-build]: already built successfully in CI
Add deviceinfo variables so that QCDT generation is carried out by
boot-deploy. The mainline kernel no longer generates the QCDT image
for the device.
[ci:skip-build]: already built successfully in CI
Upgrade the kernel to version 6.8.1.
Move the devicetrees to be built in-tree. This enables better
integration of the devicetree sources with the kernel, such as being
able to access macros available in include/dt-bindings.
Additionally, remove QCDT generation from the kernel. This is required
for supporting multiple devices, having different QCDTs. It can instead
be done in a per-device basis using boot-deploy.
[ci:skip-build]: already built successfully in CI
The China LTE versions of Samsung Galaxy S5 (G9006[VW]/G9008[VW]/G9009W) have
some little hardware difference with the G900F variant.
Add kernel variants, with klte variant for G900F (which is currently
supported) and kltechn variant for G9006/G9008/G9009W (newly added).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
The modem requires firmware to be loaded from an on-device RADIO partition, samsungipcd does that. Not installing it prevents that firmware from being used.
[ci:skip-build]: already built successfully in CI
With the new changes in lk2nd that allow us to support extlinux.conf and
with the U-Boot support with EFI, we can now generate image that would
be generic to these devices.
[ci:skip-build]: already built successfully in CI
This new package covers all three variants of the tablet: the WiFi
version (SM-T310), the 3G version (SM-T311) and the LTE version
(SM-T315). It uses the linux-postmarketos-exynos4 kernel, like other
mainlined Exynos 4 devices.
- The 3 different variants of the lt01 will be merged into a single
main device package, so the old package is deprecated.
- We will now be using the mainline kernel, so the downstream kernel is
no longer necessary.
- Add a patch to fix a new build error.
Now as boot-deploy allows us to generate both boot.img and extlinux.conf
at the same time, enable generating the config for all msm8226 since it
will be used in the future lk2nd release. boot.img is still kept to keep
compatibility with current lk2nd releases and to allow system recovery
with fastboot when required.
[ci:skip-build]: already built successfully in CI
pmOS does not support charge mode anyway, and boots to a full UI, but this vendor kernel disables touchscreen when booting in charge mode. Remove that check, so that the phone can be used as usual.
[ci:skip-build]: already built successfully in CI
- kconfig changes from `pmb kconfig migrate`
- also enabled some USB serial drivers I wanted
- Reverts 7dcd3e014aa7, fixing bluetooth connections. This commit was
added after 6.8-rc6 and causes a regression. A revert was sent
upstream: https://lore.kernel.org/all/ZfMStHjwtCT1SW3z@hovoldconsulting.com/
[ci:skip-build] already built successfully in CI
A number of fixes:
- oem-amd-nonfree-fw no longer exists from c6306cb9b, and the fw here is
pretty much required for the device to be useful so it's added to
"depends=".
- drops the -vulkan subpackage since oem-amd-vulkan is doing the same
thing.
- force rootfs partition resize on boot, else the rootfs is too small
- disable unudhcpd, usb networking isn't working, and we don't need to
run it on any dedicated eth device
- use kernel with Valve's out of tree patches, to improve stability /
usefulness of device
fixes#2630
[ci:skip-build] already built successfully in CI
There are some important platform drivers that Valve has not upstreamed,
that are basically required for this device to operate well. I picked
those patches from the kernel tree they released for 6.5, and rebased
them onto 6.8.
Our config.txt is replaced (mv'ed to config.txt.old, maybe by alpine's
initramfs-generator?) and so our configuration does not have an
effect. Put our config stuff in usercfg.txt instead, which is included
by config.txt.
Fixes: https://gitlab.com/postmarketOS/pmaports/-/issues/2471
[ci:skip-build]: already built successfully in CI
Our config.txt is replaced (mv'ed to config.txt.old, maybe by alpine's
initramfs-generator?) and so our configuration does not have an
effect. Put our config stuff in usercfg.txt instead, which is included
by config.txt.
Also update vmlinuz name, should be vmlinuz-rpi and not vmlinuz-rpi4.
Name of package in aports is linux-rpi these days. linux-rpi provides
linux-rpi4 for backward compatibility, so depending on linux-rpi4
still works, but lets use real package name so that it is easier to
find.
These are now provided by linux-firmware-brcm, which subsequently causes
a conflict between these packages. Fix it by removing the symlinks from
the device package.
Closes https://gitlab.com/postmarketOS/pmaports/-/issues/2616
[ci:skip-build]: already built successfully in CI
Changes:
- use msm-firmware-loader
- use soc-qcom-msm8953
- cleanup firmware package
- add tqftpserv as a dependency for modem
- add modules-initfs with panel and touchscreen modules
[ci:skip-build]: already built successfully in CI
Unfortunately we cannot get to a getty shell unless we also run:
setenv SWITCH_SEL 3
from the SBL shell. Furthermore, actually getting kernel output
requires setting console=ttySAC2,115200.
SWITCH_SEL might be related to the "MUIC" of the device, but the
variable also controls whether or not it is possible to get serial
output from pads on main board, and seems weird that those pads are
affected by MUIC (unless pads are also behind MUIC, but seems like
that would be very annoying when developing the device)
See also initial MR where mainline support for i9100 was added, where
serial output is also discussed:
https://gitlab.com/postmarketOS/pmaports/-/merge_requests/1598#how-to-get-serial-output
[ci:skip-build]: already built successfully in CI
Added postmarketos-base-downstream and msm-fb-refresher to jxelte
dependencies.
The modules_install and firmware_install targets install binary
files as the zram files among others.
Added the 'mfc_fw.bin' binary to be installed from the firmware
package.
The '0002-fix-usb-gadget-random-mac.patch' patch make it possible
to get ethernet over usb, and the 'disable-charging-bootmode.patch'
avoid error messages on dmesg about 'sec_battery_probe'.
[ci:skip-build]: already built successfully in CI
Fix incomplete commit ecc91098a9 that
was missing the dependency on
"postmarketos-base-downstream-disable-udev-v4l".
Fix MR !4768
[ci:skip-build]: already built successfully in CI
This fixes building for linux-lg-vee7e, and adds a shared patch.
The shared patch replaces the "Solaris style flags" in piggy.gzip.S
[ci:skip-build]: already built successfully in CI
Commit fe54a7be4 ("device/msm8916*: Generate extlinux.conf (MR 4826)")
updated most users of msm8916 kernel to generate extlinux.conf.
Unfortunately the commands used to bulk-make changes only affected
aarch64 users of the kernel package and armv7 users were missed.
Apply the same changes to all armv7 users of msm8916 kernel too.
[ci:ignore-count]
This installs all linux-firmware by default (using pmb_recommends) in a
way that allows for users to remove extraneous fw if they want.
The old `nonfree-firmware` packages have been dropped since pmbootstrap
no longer conditionally installs these.
[ci:skip-build]: already built successfully in CI
This switches from 6.1 LTS to 6.6 LTS.
Unfortunately, this version has regressions related to SPI (breaks keyboard)
and DRM (breaks display). Thus adding patches to revert these regressions.
Hopefully, these will be properly fixed until the next LTS release.
This also makes it pass community kconfig check again.
[ci:skip-build]: already built successfully in CI
- Fixes FDE unlocking on devices with usb keyboards
- Also drops the i915 module from the initfs, this is specified by the
oem-intel package now
[ci:skip-build] already built successfully in CI
On HTC devices with S-On still active, the 'userdata' partition
is not writable. Change the default rootfs partition to the
'system' partition, which is writable.
Now as boot-deploy allows us to generate both boot.img and extlinux.conf
at the same time, enable generating the config for all msm8916 since it
will be used in the future lk2nd release. boot.img is still kept to keep
compatibility with current lk2nd releases and to allow system recovery
with fastboot when required.
[ci:skip-build] already built successfully in CI
[ci:ignore-count]
* Depend on the common soc-qcom-sm7150 package
* Set console=null in cmdline
* Add touchscreen firmware to initramfs
* Add required modules for touchscreen to modules-initfs
* Panel output works, drop phoc.ini
* Switch maintainer and co-maintainer
* Bump pkgrel to 1.2
Signed-off-by: Jens Reidel <adrian@travitia.xyz>
hwclock default configuration is to use the S3C RTC, which is mapped to
/dev/rtc0. However, reading from this clock fails with the following
kernel message:
"s3c-rtc 101e0000.rtc: hctosys: unable to read the hardware clock"
and the time as boot is then always set to 1/1/1970.
This commit change the default RTC to the MAX77686 one (mapped to
/dev/rtc1), that does not suffer from this issue.
Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>
The adjustments made by this script are unnecessary now that the device
runs a mainline kernel, and more importantly the brcmfmac driver (as
opposed to the bcmdhd driver used in the vendor kernel).
Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>
With the pmbootstrap change let's change the deviceinfo variable names
to the non-deprecated version.
[ci:ignore-count]
[ci:skip-build]: already built successfully in CI
This commit also removes librecomputer-solitude/alta device tree patches
as they're now upstream.
Signed-off-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
[ci:skip-build]: already built successfully in CI
This device has no maintainers specified, and, though I did not port this
device, I have one and I maintain linux-postmarketos-exynos5, so it is
probably okay for me to take maintainership of it.
As for several other exynos devices we need to disable the
video4linux's udev rule OR disable FIMC IS and patch kernel to fix
build error without FIMC IS.
Add dependency on postmarketos-base-downstream-disable-udev-v4l to
override the v4l rule with symlink to /dev/null. We can then drop
FIMC IS patch and keep kernel config more similar to original one.
As for several other exynos devices we need to disable the
video4linux's udev rule OR disable FIMC IS and patch kernel to fix
build error without FIMC IS.
Add dependency on postmarketos-base-downstream-disable-udev-v4l to
override the v4l rule with symlink to /dev/null. We can then drop
FIMC IS patch and keep kernel config more similar to original one.
We want both klimtwifi and klimtlte to be able to depend on
firmware-samsung-klimt, for both their downstream and mainline kernel
variants.
Previously we used install_if like:
install_if="device-samsung-klimtlte-kernel-mainline" which will only
work for klimtlte and not klimtwifi. Instead we add two nonfree
subpackages to the device packages that install_if's depending on
kernel choice.
We want both chagallwifi and chagalllte to be able to depend on
firmware-samsung-chagall, for both their downstream and mainline
kernel variants.
Previously we used install_if like:
install_if="device-samsung-chagallwifi-kernel-mainline"
which will only work for chagallwifi and not chagalllte. Instead we
add two nonfree subpackages to the device packages that install_if's
depending on kernel choice.
Provides firmware files that are common for all Samsung devices based
on Exynos 5420 when using Samsung's vendor kernel.
For now the package contains mfc, sound and bluetooth firmware. Sound
and bluetooth do not work at the moment, but lets package the required
files anyways.
Postmarketos-base-downstream-disable-udev-v4l symlinks
/lib/udev/rules.d/60-persistent-v4l.rules to /dev/null, so depend on
this package instead. The dependency is added to downstream kernel
subpackage, as issue *should* only affect downstream kernel.
[ci:ignore-count]: many device packages updated at the same time
[ci:skip-build]: already built successfully in CI
Postmarketos-base-downstream-disable-udev-v4l symlinks
/lib/udev/rules.d/60-persistent-v4l.rules to /dev/null, so depend on
this package instead. The dependency is added to downstream kernel
subpackage, as issue *should* only affect downstream kernel.
Postmarketos-base-downstream-disable-udev-v4l symlinks
/lib/udev/rules.d/60-persistent-v4l.rules to /dev/null, so depend on
this package instead. The dependency is added to downstream kernel
subpackage, as issue *should* only affect downstream kernel.
Since audio over DisplayPort (over USB-C) is supported in the kernel,
add a UCM config to complete support.
To be clear, this might not work out of the box yet, I hope it'll start
working better when another audio route (speaker or microphone) is
working from kernel side.
[ci:skip-build]: Already built successfully in CI.
Since the GPU is supported since a while enable
deviceinfo_gpu_accelerated to let pmbootstrap show UIs like phosh.
Also with modem working with patched tqftpserv, we need the
msm-modem-uim-selection dependency, so add that as well.
In mainline Linux these paths will be used, move the firmware packaging
there. By doing this we drop downstream support. Support could be
restored by adding some symlinks in a downstream-specific package if
required.
We also start squashing the firmware into .mbn format with pil-squasher.
For now we keep the files in _wififiles in their old location, I'm not
sure yet where they need to go since I didn't have wcnss working on
mainline yet.
Required for getting mobile data up, otherwise ModemManager fails to
connect with:
Status | connected: no
| connection error name: org.freedesktop.ModemManager1.Error.MobileEquipment.Unknown
| connection error message: failed to create net link for device: failed to add link for device: Could not allocate link: Failed to add link with mux id 1: Netlink message with transaction 27 failed
Previously, the modem firmware would be loaded from the modem partition
using this firmware loader. As of the 6.5.4 SDM670 kernel upgrade, the
firmware is installed and loaded from the firmware package. Drop the
dependency on the msm-firmware-loader, which is now unused.
I was building a branch archive previously, which meant that rebuilding
would fail if someone pushed to the branch upstream (the archive
checksum would change)... so I've reverted back to building from a
specific commit for now.
pkgrel was increased because this commit includes a couple of
audio-related patches that weren't included in the previous packaging of
the 6.7 branch.
[ci:skip-build] Already build-tested on Gitlab CI
Similarly to how it was done for xiaomi-beyllium with varying
display panels, add kernel variant for clover-plus.
Mi Pad 4 Plus is very very similar to regular Mi Pad 4,
but it has different panel and different touchscreen.
Therefore it uses different device tree in kernel - and it
is the only changed line in deviceinfo file.
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
[ci:skip-build]: Already built successfully in CI.
In order to make it work properly, the fcc unlock script from MM should
also be enabled... This info will be added to the device's wiki page for
now since upstream MM discourages distros from enabling these unlock
scripts by default...
fixes https://gitlab.com/postmarketOS/pmaports/-/issues/2489
[ci:skip-build]: Already built successfully in CI.
