The previous implementation of this caused upower to select a thing
called 'flash_strobe' in the L5, which doesn't operate like a
flashlight. This changes the detection logic to look at the suffix, on
the pinephone the device ends in ':flash', and on the L5 it ends in
':torch'.
fixed#967
This patch is in purism's fork and it removes messages like this when
starting upower on the librem5 by properly detecting/setting the type:
TI:15:11:12 did not recognise USB path /sys/devices/platform/soc@0/30800000.bus/30a20000.i2c/i2c-0/0-003f/power_supply/tps6598x-source-psy-0-003f, please report
...
TI:15:11:12 did not recognise USB path /sys/devices/platform/soc@0/30800000.bus/30a50000.i2c/i2c-3/3-006a/power_supply/bq25890-charger, please report
This adds a new subpackage that installs dependencies and configures the
smartcard reader on the librem 5. Some setup is required before this
will work (e.g. upgrading reader firmware), the L5 wiki page will have
this information.
The pcsc init script was forked into this package to allow for powering
on the reader *before* the service started. Doing this in a separate
init script would have caused the reader to power on regardless of
whether the pcsc service was set to start, which is not desirable since
it should *only* be powered on when pcsc is starting
So far the debug-shell in initfs works. The device uses dynamic
partitions, so that has to be figured out to get a proper rootfs.
One thing to look out for is that mount_subpartitions task in initfs
hangs, so pmos_boot=sth was added to kernel cmdline to skip it. This is
also related to dynamic partitions, anyway.
[ci:skip-build] Already built on CI
Update to the 5.11.0 kernel release.
This also fixes the previous build warnings.
[ci:skip-build] Already built fine on CI.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Handle USSD QMI indication messages.
Add support for UCS2 USS Data coding scheme.
Check for User Action TLV type.
Downstream the accepted ofono patch as temporary solution.
Based on the Alpine mesa APKBUILD, but only the DRI driver
is packaged. It conflicts with the DRI gallium driver as
they both provide ARM dri drivers. It depends on the main
Mesa packages.
From TI, they must not be redistributed in a modified form. They
are built against GLIBC 2.29
To be functional, they need to be paired with a special build
of Mesa. There are subpackages for each different soc and only
one soc can be installed at a time. The Exynos S5PV210 subpackage
uses the same SGX540-120 as the ti443x blobs, but needs a binary
edit to be loaded. Due to the license restrictions, it must be
done in a post-install script.
We may wish to distribute some files that are explicitly
non-free, and it makes sense to place them in a separate
non-free directory rather than in main.
The work on an adaptive gpodder UI by tpikonen has continued
and is now available in the official gpodder repo as a dedicated
branch. This commit updates the package to the latest current
version of the branch.
CRDA in the kernel requires a regulatory database to be available
to configure the WiFi card correctly following the regulations in
each possible environment.
This has upstreamed fixes for call audio on the L5, but upstream hasn't
made a release yet. In the meantime, this is needed for calls to work on
5.11.0 and later kernels
[ci:skip-build]: won't finish in time
Purism has changed the kernel name they used, so that's reflected in the
apkbuild.
This kernel includes patches for renaming the audio device, and requires
a corresponding upgrade to the device package to bring in the new ucm2
config changes for that.
Cypress bought the brcm WiFi stuff from broadcom so they want their firmware to
be called cyfmac instead of brcmfmac
a lot of brcmfmac firmware is now symlinked to cyfmac
This package is no longer used, as the OnePlus 6 will now use the
linux-postmarketos-qcom-sdm845 package.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
