The kgsl 3d driver causes the device to boot loop, so disable this for
now.
The device boots ok after removing the kgsl driver, although continuing
boot from debug-shell via `pmos_continue_boot` does not work (seems to
be a bug in msm_fb driver). So, one has to reflash the boot partition
generated with no intfs debug shell to enjoy this improvement.
* [samsung-p4wifi] Include modules in kernel package
* [samsung-p4wifi] Load wifi modules at boot
* [samsung-p4wifi] Use mainline wm8994 sound driver
* [samsung-p4wifi] Add ALSA UCM config
Generated from xml2ucm tool.
* [samsung-p4wifi] Add headphone jack detect udev rules
* [samsung-p4wifi] Remove touchscreen calibration
It is not a resistive touchscreen. The default calibration works.
* Qualcomm MSM modem: 'rmtfs' support packages
* qcom_rmtfs: Server that talks to modem over IPC to allow it
read/write data for its persistent storage. This is needed for it to
boot, as well as periodically during usage. Added a patch that
it expects the storage path symlinks in /etc instead of /boot.
* qrtr: IPC library for rmtfs
* libqipcrtr4msmipc: adapter library to make qrtr work on kernels with
AF_MSM_IPC support. AF_QIPCRTR is the mainline equivalent since Linux
~4.7.
* msmipc-dev: Header files for qrtr and libqipcrtr4msmipc.
Thanks to Bjorn Andersson <https://github.com/andersson> for rmtfs and
qrtr.
* libsmdpkt_wrapper: adapter lib for QMI clients
The SMD serial packet driver in Qualcomm kernels has, AFAICT, a bug
in poll(); this works around it so that qmicli et al can work.
* i9195: firmware (modem only right now)
* add ofono (with patch for MSM devices)
Based on Alpine's package.
* i9195: add modem support
* move all modem related packages to aports/modem
Specifying alternate subpackages in the provides variable of the main
package means that the main package itself is providing an alternate for
the subpackages (e.g. gtk+2.0-maemo provides an alternate gtk+2.0-dev).
The provides variable must be set for each subpackage. Fixes#1284.
* Add charging-sdl package
* Include charging-sdl into the initramfs-extra
* [initramfs] Detect charging mode and use triggerhappy to start
charging-sdl when the power key is pressed
Since it works for linux-postmarketos-stable, I've simply copied over
the config, and ran "pmbootstrap menuconfig" on it again. Then it
worked again in Qemu.
* Add NetworkManager and PulseAudio applets to Plasma
* This crashes plasma mobile on armhf (where it is not usable due
to performance problems anyway), except on mainlined kernels
with hardware accelerated graphics. This is mentioned in the
pkgdesc of postmarketos-ui-plasma-mobile now.
When building device packages, the postmarketos-mkinitfs package gets
installed as dependency of postmarketos-base. It must not try to
create an initramfs at this point, when there is not deviceinfo file.
We build the initramfs during the installation, so it's fine.
Added [skip ci] because linux kernels and KDE updates are currently
getting built for the binary repository (so Travis couldn't finish
anyway).
* Add nonfree_firmware subpackage to all devices, that depend on
nonfree firmware.
* Some packages were depending on `linux-firmware`, but without having
Wifi working. Removed that dependency as it was probably added by
accident. If it was really necessary, chosing the appropriate
split linux-firmware package (e.g. linux-firmware-brcm) is better
anyway (that has been changed recently in Alpine and is possible
now).
* Add a test case that makes sure we don't have firmware depends
without subpackages in device aports anymore.
* device-*: add postmarketos-base to depends
* aportgen: add postmarketos-base to depends
* Add test case
* postmarketos-base: Don't depend on devicepkg
* msm-fb-refresher: Enable service in post-install
It lacked some hardware config, such as the USB switch.
With this change, I was able to SSH over the USB network.
I based this off of LineageOS 14.1's config file from its
build root. I think we were missing the secondary config
file
(TARGET_KERNEL_VARIANT_CONFIG := msm8930_serrano_eur_lte_defconfig
in BoardConfig.mk).
* gp-peak: Add support for osk-sdl
* gp-peak: Move non-kernel files to device-gp-peak
* gp-peak: Add audio support
Manually trigger the udev rules for audio devices and add the default user to the audio group
