I use the PineTab 2 for various tasks on a semi-regular basis, so I
would like to co-maintain it.
---
[ci:skip-vercheck]:
Since this doesn't affect the resulting package as Co-Maintainer is a
postmarketOS schema extension that abuild doesn't read, there is no need
to bump pkgrel for this.
[ci:skip-build]: already built successfully in CI
- Added some modules to fix booting from emmc/nvme (fixes#2953)
- Partially fixes debug shell (#2955): the OSK still shows partially,
but at least now there's some usable console/shell with an external
usb keyboard.
[ci:skip-build] already built successfully in CI
Since the v6.9 upgrade the kernel supports Type-C functionality for
Fairphone 4, but I forgot to enable the relevant kconfig options then.
Enable them now along with a bunch of options related to USB that come
in useful. Also prepare some options that will be used in the future
with DisplayPort over USB-C (e.g. SBU mux).
[ci:skip-build]: already built successfully in CI
... and install the firmware package using _pmb_recommends instead.
Applied to both downstream and mainline ports.
[ci:skip-build]: already built successfully in CI
With the latest kernel bump the config was updated based on the output
of:
make ARCH="$_carch" CC="${CC:-gcc}" defconfig KBUILD_DEFCONFIG=librem5_defconfig
but there are other changes that pop up when running
pmbootstrap kconfig edit linux-purism-librem5
This commit updates the config so that future config empty edits don't
generate any changes.
This is still pretty in sync with the Purism config, besides passing the
`kconfig check` and disablling SELinux as that causes boot failures.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[ci:skip-build]: already built successfully in CI
Updated to latest collabora cros kernel. Fixes audio on mt8192 devices
and fixes display issues on all devices using this kernel.
[ci:skip-build]: already built successfully in CI
Add the required dependencies and config for both hexagonrpcd and
libssc so that sensors start working.
[ci:skip-build]: already built successfully in CI
Add the required dependencies and config for both hexagonrpcd and
libssc so that sensors start working.
[ci:skip-build]: already built successfully in CI
The device already loads plenty of nonfree-firmware into the
co-processors during the bootloader stages, and also once booted in
Linux won't really be useful without everything.
Additionally I doubt anyone tests that case, so just require nonfree
firmware unconditionally to simplify maintenance.
This gets Bluetooth working for the Sparklan card.
btattach doesn't work on the Librem5 at the moment (see [1]) so even
though it's deprecated let's use hciattach to get things working.
1: https://source.puri.sm/Librem5/librem5-base/-/issues/76
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[ci:skip-build] already built successfully in CI
I made an oversight in pmaports!5295 which caused the post-install
script to try enabling the sd8x-wlan service even if the downstream
subpackage isn't installed. This causes errors when creating a new
mainline rootfs, so fix it by moving the install variable declaration to
the subpackage function.
Patches were rebased, sadly nothing was dropped :(
All kconfig changes are from simply running `kconfig migrate` and
accepting all defaults when prompted
[ci:skip-build]: already built successfully in CI
Resolves this harmless, but annoying error on mainline:
* Enabling wlan driver ...
/lib/rc/sh/openrc-run.sh: line 14: can't create /sys/devices/platform/sd8x-rfkill/pwr_ctrl: nonexistent directory
* ERROR: sd8x-wlan failed to start
[ci:skip-build]: already built successfully in CI
This also increases the (necessarily) hardcoded initrd end by 16MiB in
the DTS, which is necessary to make the phone boot with the new
initramfs (and in general any initramfs which exceeds 2624KiB).
This seems to be some Samsung's proprietary verified boot solution.
After a recent update, this started bootlooping my phone.
I have no idea why it only fired now, but pmOS does not use this
feature anyway, so it won't hurt to disable it.
[ci:skip-build] Already built fine once
Without it some devices will fail to mount the boot partition:
FAT-fs (mmcblk1p1): IO charset ascii not found
Also disable CONFIG_RT_GROUP_SCHED.
Reported-by: Anton Bambura <jenneron@protonmail.com>
Signed-off-by: Ferass El Hafidi <funderscore@postmarketos.org>
[ci:skip-build]: already built successfully in CI
This cmdline argument is now a no-op. Drop it everywhere and add a new
CI check to enforce this.
Adjust the deprecated "minimal" initramfs variant to use
pmos.debug-shell to enable logging instead. It doesn't /support/
dropping to a shell, so the variable takes on a different meaning. But
that's ok since it's at least more consistent.
[ci:ignore-count]
[ci:skip-vercheck]
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Tweaked-by: Oliver Smith <ollieparanoid@postmarketos.org>
[ci:skip-build]: kernel builds are very likely to go through now
* drop maxcpus=0, which was added with 73a033328e ("device-nokia-n900: set
uniprocessor mode for kernel (MR 4299)") while troubleshooting. a better
fix was eventually implemented with 3e737241ba ("linux-postmarketos-omap:
N900: disable twl off idle features (MR 4317)")
* drop PMOS_NO_OUTPUT_REDIRECT, which was obsoleted by 7c98127746
("postmarketos-initramfs: switch to udev and kmod (MR 5000)")
Use stock WiFi firmware instead of the generic linux-firmware-brcm
firmware. The stock firmware is newer and seems to be better suited
for the BCM4334B2 variant used in these tablets.
This fixes timeout errors from the brcmfmac driver and seems to
slightly improve download/upload speeds (by about 1MB/s).
trailblazer is a bleeding edge, unstable target for EFI capable ARM64
devices. It runs linux-next and should otherwise be adjusted to support
as many devices as possible.
The goal of trailblazer is to motivate more upstream kernel development by
providing a tighter feedback loop (patches land in -next weeks before they
make it into mainline or stable), as well as encouraging more generic
solutions to the device specific hacks we have in userspace.
On supported devices, trailblazer should reflect the current state of
upstream. It allows users to easily appreciate what feature are
unavailable, and more importantly appreciate when a new feature does get
added upstream.
Due to the instability of linux-next, the plan is to have BPO build
trailblazer images nightly, so if next breaks then the images should
only be broken for a day.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
Introduce a linux-next kernel with postmarketOS configs and some
additional device specific configs enabled.
This kernel package will be updated daily to the latest -next tag.
breakages expected. It is designed to be used in tandem with a generic
ARM64 device package to provide a bleeding edge option for those with
EFI capable bootloaders.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
