Commit graph

842 commits

Author SHA1 Message Date
Oliver Smith
69afe6cfc7
u-boot-*: bump pkgrel after a-t-f upgrade (MR 3291)
Bump the remaining users of arm-trusted-firmware besides
u-boot-pinephone.

[ci:skip-build]: already built successfully in CI
2022-07-24 17:11:48 +02:00
Dylan Van Assche
47c6d4995a
soc-qcom-sdm845: shutdown when battery is critical (MR 3287)
UPower defaults to HybridSleep mode when battery is critical.
Since we allow suspending the device in regular use, this approach
won't help in a critical battery case scenario. When the battery
level is critical, shutdown the device instead.

Moreover, adjust the default levels for battery low, critical, critical
action since they are too high for SDM845 devices.
2022-07-24 17:07:55 +02:00
Luca Weiss
91ca0bfa01
device/*: replace old mesa-dri- dependencies with gallium (MR 3257)
vc4 and freedreno have been provided by mesa-dri-gallium for a long
time.

mesa-dri-intel subpackage has been deprecated for a while (previously
dependend on dri-classic and dri-gallium)

mesa-dri-classic drivers is removed because mesa upstream has removed
those old drivers from the tree. They've been replaced (for not-ancient
hardware) by gallium.

See also https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/31848
2022-07-21 13:53:12 +02:00
Yassine Oudjana
ba3896f2ae
community/firmware-xiaomi-scorpio: Add QCA6174 board firmware (MR 3271) 2022-07-15 16:07:41 +02:00
Oliver Smith
c798839c60
pine64-pinephonepro: tweak kernel parameters (MR 3280)
* set PMOS_FORCE_PARTITION_RESIZE
* set loglevel=1 to have less verbose kernel output during boot, same as
  for the pinephone
2022-07-11 08:32:04 +02:00
Oliver Smith
f608015ea3
pine64-pinephonepro: fix dev_internal_storage (MR 3280) 2022-07-11 08:31:59 +02:00
Luca Weiss
724f4dc8b2
bq-paella: update maintainers (MR 3200)
Jonathan hasn't been active on GitLab since more than a year, so remove
them from the maintainer list for this device.
2022-07-08 21:29:18 +02:00
Oliver Smith
28e2019ff7
pine64-pinephonepro: fix audio with alsa-lib 1.2.7 (MR 3272)
Let /usr/share/alsa/ucm2/conf.d/simple-card/*.conf be a symlink,
as it is expected since alsa-lib 1.2.7.

Related: d6adde0e32
[ci:skip-build]: already built successfully in CI
2022-07-08 00:04:54 +02:00
Martijn Braam
e99bc1224d
device/pine64-pinephonepro: add bluetooth firmware (MR 3278)
[ci:skip-build]: already built successfully in CI
2022-07-07 23:31:18 +02:00
Martijn Braam
f59355bf6b
device/pine64-pinephonepro: update kernel to 5.17.9 (MR 3278) 2022-07-07 14:58:22 +02:00
Martijn Braam
560c92cff3
device/pine64-pinephonepro: clean up kconfig (MR 3238)
[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI
2022-07-07 09:27:18 +02:00
Martijn Braam
11e959cc01
device/pine64-pinephonepro: fix up firmware (MR 3238)
Remove the firmware that was copied from the pine64-pinephone and add
the cdn-dp firmware for the rockchip platform.

[ci:skip-vercheck]
2022-07-07 09:26:57 +02:00
Martijn Braam
b58b7cfbd4
device/pine64-pinephonepro: fix calling (MR 3238) 2022-07-07 09:26:57 +02:00
Martijn Braam
484b23f7a0
device/pine64-pinephonepro: Move to commmunity (MR 3238) 2022-07-07 09:26:57 +02:00
Harry Austen
700756cad2
community/linux-postmarketos-qcom-msm8996: add support for iwd (MR 3266)
These options are required by `iwd`. Make use of the `kconfigcheck-iwd`
APKBUILD option to ensure the required config options remain selected.

[ci:skip-build] already built successfully in CI
2022-07-05 18:39:04 +02:00
Oliver Smith
5572c21fa3
pine64-pinetab: fix audio with alsa-lib 1.2.7 (MR 3273)
Let /usr/share/alsa/ucm2/conf.d/simple-card/*.conf be a symlink,
as it is expected since alsa-lib 1.2.7.

Related: d6adde0e32
2022-07-05 11:44:32 -04:00
Dylan Van Assche
18a50389d6
device-pine64-pinebookpro: drop ALSA UCM configs (MR 3268)
ALSA UCM configs are now upstreamed which causes
a conflict with the device package as both are now
providing the same files. Drop our configs in the device package.
2022-07-02 16:16:28 -04:00
Uli Roth
2eb1a1199b
firmware-xiaomi-beryllium: remove board-2.bin to solve conflict (MR 3241)
Remove board-2.bin firmware as it is already included in linux-firmware-ath10k.

Fixes #1567
2022-06-17 19:10:05 +03:00
Jami Kettunen
46676e735d
linux-postmarketos-rockchip: add vndbinder device for Waydroid (MR 3239) 2022-06-15 21:30:54 +03:00
Alexander Martinz
cdc9bb564b
community/linux-postmarketos-qcom-sdm845: upgrade to 5.18.3 (MR 3213)
For a merge list, please see the merge commits:
  - 5.18.1 - (3d98cf52b5)
  - 5.18.2 - (99cf0d285f)
  - 5.18.3 - (b425b70a63)

-----

This also changes the following Kconfig options:
  - CONFIG_SCSI_UFS_BSG -> y

Change-Id: I4406f381b48a894ea0bff3006fb3fa62683e61a0
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: already built successfully in CI
2022-06-14 10:13:41 +02:00
Raymond Hackley
bf639fc01d
samsung-e7: Move to community (MR 3188)
Like samsung-a{3,5}, samsung-e7 works quite well. Move it to community.

[ci:skip-build] already built successfully in CI
2022-06-11 15:52:18 -07:00
Caleb Connolly
8e5b569bef
device-shift-axolotl: depend on qbootctl (MR 3190)
[ci:skip-build] already built successfully in CI
2022-06-11 15:47:27 -07:00
Caleb Connolly
faae2121ff
device-oneplus-*: depend on qbootctl (MR 3190)
[ci:skip-build] already built successfully in CI
2022-06-11 15:47:26 -07:00
Caleb Connolly
245f6e6911
soc-qcom-sdm845: add qbootctl (MR 3190)
[ci:skip-build] already built successfully in CI
2022-06-11 15:47:26 -07:00
Martijn Braam
f321581f12
device-pine64-pinetab: fix alsa ucm (MR 3218)
[ci:skip-build] already built successfully in CI
2022-06-11 15:35:56 -07:00
Yassine Oudjana
4da6031e8f
community/device-xiaomi-scorpio: disable GPU binning pass (MR 3210)
This is a workaround for a freedreno bug that causes some artifacts
in GNOME and GTK4 apps.
2022-06-09 08:54:47 +02:00
Syboxez Blank
1770b37b60
device: sdm845-{enchilada,fajita,beryllium,axolotl}: rename qcom_smb2 to qcom_pmi8998_charger (MR 3204) 2022-06-08 09:41:31 +02:00
Minecrell
dcfaa6acc2
community/linux-asus-me176c: fix build by updating kernel config
Run "pmbootstrap kconfig migrate asus-me176c" to update the kernel
config for the new Linux version. Otherwise there is an interactive
prompt that times out on BPO (although it succeeds on GitLab CI for
some strange reason).
2022-06-07 19:42:57 +02:00
Minecrell
62f0d60ef7
community/device-asus-me176c: install vulkan/libva driver if needed (MR 3195)
Add subpackages that automatically cause installation of the Vulkan
and libva driver if packages using them get installed. This reduces
the size of a minimal rootfs but still ensures those are present if
needed.

[ci:skip-build]: already built successfully in CI
2022-06-07 08:22:43 +02:00
Minecrell
635906b9aa
community/linux-asus-me176c: upgrade to 5.4.197 (MR 3195)
The new linux-edge / 5.18 kernel will likely not make it in time for
the v22.06 release so let's upgrade the good old 5.4 kernel to the
latest stable release at least.
2022-06-07 08:22:37 +02:00
Martijn Braam
bda72ea7fc
device-pine64-pinebookpro: fix alsa ucm (MR 3203)
[ci:skip-build]: already built successfully in CI
2022-06-07 07:41:28 +02:00
Minecrell
b714ea8aef
device-*: Drop file system modules from deviceinfo_modules_initfs (MR 3166)
File system modules are included by default in postmarketos-mkinitfs
and loaded dynamically when needed.

[ci:skip-build]: already built successfully in CI
2022-06-06 10:11:59 +02:00
Yassine Oudjana
b47461fa75
community/linux-postmarketos-qcom-msm8996: upgrade to 5.18.1 (MR 3183)
[ci:skip-build]: already built successfully in CI
2022-06-06 09:41:48 +02:00
Dylan Van Assche
8848527c22
device-odroid-hc2: enable Samsung JPEG encoder (MR 3191)
Add missing firmware from linux-firmware-other to enable Samsung JPEG hardware encoder
[ci:skip-build]: already built successfully in CI
2022-06-06 09:38:08 +02:00
Dylan Van Assche
7a0e90c2fb
linux-odroid-hc2: upgrade to 5.18.1 (MR 3191) 2022-06-06 09:37:48 +02:00
Minecrell
fa93f361b5
community/linux-postmarketos-qcom-msm8916: upgrade to 5.18 (MR 3189)
- Update to Linux 5.18
- Fix Bluetooth startup problem
- Upstreamed not so many patches this time
- Even more things I forgot than usual...

pmOS kernel config:
  - Enable BNEP, RFCOMM for extra BT features

Device changes:
  - samsung-j3ltetw/j5/j5x:
    - Now covered by a common device tree include
    - Add proper display driver (no brightness control yet)
    - Hall sensor (except j3ltetw)
    - Touchscreen (only j3ltetw and j5x, j5 is still WIP)
    - Sound/Modem for all of them

New devices:
  - samsung-grandmax (Samsung Galaxy Grand Max)
    - eMMC, SD card, USB, Buttons, WiFi/BT, Vibrator
    - Display
    - Touchscreen
    - Sensors (Accelerometer)
    - Sound/Modem
    - Battery status

[ci:skip-build]: already built successfully in CI
2022-06-06 09:11:12 +02:00
Anton Bambura
0408920a34
linux-postmarketos-rockchip: rework armv7 config (MR 3187) 2022-06-05 16:23:20 -04:00
Sicelo A. Mhlongo
ba3731956d
nokia-n900: drop weston subpackage (MR 3174)
Drop the weston config, as it was for fbdev which has not been supported
in weston anymore for a while.

Remove Martijn as Co-Maintainer, as both previous maintainers of the
Nokia N900 stopped maintaining it when the device was briefly dropped
from community.

Co-Authored-By: Oliver Smith <ollieparanoid@postamrketos.org>
[ci:skip-build]: already built successfully in CI
2022-06-03 09:58:08 +02:00
Sicelo A. Mhlongo
90c71ce639
linux-nokia-n900: upgrade to 5.18.1 (MR 3174)
Drop 0002-ARM-dts-n900-remove-rx51-battery.patch, because this wasn't
needed for postmarketOS in the first place. The patch was created for
Maemo Leste as upower quirk initially and they don't carry it anymore
either.

Drop other patches, as they have been upstreamed.

Co-Authored-By: Oliver Smith <ollieparanoid@postmarketos.org>
2022-06-03 09:47:41 +02:00
Caleb Connolly
e820b4171d
community/linux-postmarketos-qcom-sdm845: upgrade to 5.18.0 (MR 3143)
[ci:skip-build]: already built successfully in CI
2022-06-03 09:24:27 +02:00
Uli Roth
7b10f19396
device-xiaomi-beryllium: Fix touchscreen in initramfs for ebbg panels (MR 3184)
[ci:skip-build] already built successfully in CI
2022-06-02 16:09:02 -07:00
Clayton Craft
2dd5a5ab0f
linux-postmarketos-rockchip: upgrade to 5.18 (MR 3170)
Dropped the usb-c patches, because it looks like usb-c charging works
now out of the box on 5.18, and that was the primary reason for me to
include those patches here originally.

[ci:skip-build] already built successfully in CI
2022-06-01 21:43:12 -07:00
Minecrell
ac86b5e760
community/firmware-qcom-db410c: upgrade to 1036.1 (except -wcnss) (MR 3163)
While the newer "Linux board support package" has newer versions for
the "modem" and "venus" firmware, the "wcnss" firmware is actually
older than the one in the previous 1034.2.1 release. To avoid
downgrading it, it is still packaged from the old release in a separate
APKBUILD. (It is probably also better tested than the new release...)

[ci:skip-vercheck]: non-zero pkgrel is intended to match old package
[ci:skip-build] already built successfully in CI
2022-06-01 21:12:32 -07:00
Newbyte
ed0c3001eb
device/community/u-boot-pinebookpro: add maintainer (MR 3135)
Copied from device-pine64-pinebookpro.

[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI
2022-05-31 09:23:34 +02:00
Newbyte
6adf25277d
device/community/u-boot-rockpro64: add maintainers (MR 3135)
Copied from device-pine64-rockpro64.
2022-05-31 09:23:24 +02:00
Newbyte
512c02b179
device/community/u-boot-pinebookpro: move from temp (MR 3135) 2022-05-31 09:23:22 +02:00
Newbyte
40e937a459
device/community/u-boot-rockpro64: move from temp (MR 3135) 2022-05-31 09:23:22 +02:00
Newbyte
538129be5b
linux-postmarketos-exynos4: upgrade to 5.18.0 (MR 3168)
Dropped patch was upstreamed.

[ci:skip-build] Already built successfuly on CI in MR
2022-05-30 19:06:29 +02:00
Luca Weiss
96f2ad2fac
firmware-qcom-adreno: upgrade to 20220509, add a330 & a420 (MR 3149)
The new linux-firmware release contains A330 and A420 firmware, so add
subpackages for those.

[ci:skip-build]: already built successfully in CI
2022-05-25 09:51:07 +02:00
InsanePrawn
43af024596
device/community: sdm845-{enchilada,fajita,beryllium,axolotl}: add appropiate charging drivers (MR 3127) 2022-05-19 02:50:22 +02:00
Alexander Martinz
b4ac329482
shift-axolotl: add support for dynamic partitions (MR 3137)
For more information, see this wiki entry:
  - https://wiki.postmarketos.org/wiki/Android_dynamic_partitions

Change-Id: Iaf4ba715bc7226d43e05213cd5bd6ce82d327b7e
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
2022-05-17 20:28:07 +02:00
Raymond Hackley
f3cd6ea0ee
device/*: fix phosh startup due to new config syntax (MR 3117)
[ci:ignore-count]
2022-05-15 16:52:04 +02:00
Bart Ribbers
86af0bb463
shift-axolotl: move to community (MR 3119)
It checks all the boxes as defined in https://wiki.postmarketos.org/wiki/Device_categorization

[ci:skip-vercheck]
2022-05-14 16:12:19 +02:00
Antoni Aloy Torrens
e822fde276
community/linux-samsung-espresso3g: Fix WiFi reboot issue (MR 3130)
- Patch from Robert Nelson and Hansem Ro.

- Based on the work of Hansem Ro,
  who owns another device, the First Generation Kindle Fire,
  which has similar specifications as the Samsung Galaxy Tab 2 7.0.
2022-05-12 16:30:11 +01:00
Yassine Oudjana
43f309f5ed
xiaomi-scorpio: change device tree name (MR 3126)
The device tree in the kernel is now named msm8996pro-xiaomi-scorpio.dts.
[ci:skip-build]: already built successfully in CI
2022-05-11 09:33:15 +02:00
Yassine Oudjana
02a1a8a20b
community/linux-postmarketos-qcom-msm8996: upgrade to 5.17.6 (MR 3126)
- Add support for Xiaomi Mi 5s Plus (xiaomi-natrium)
- Update charger driver
- Fix race condition in qcom-ngd-ctrl probe
2022-05-11 09:32:56 +02:00
Newbyte
0a90f9d777
samsung-m0: change names in UCM (MR 3120)
This makes the names match the recommended names in the ALSA UCM
header:
f1fa7ea077/include/use-case.h (L112-L144)
2022-05-08 17:26:21 +02:00
Newbyte
0ecbe662c7
soc-samsung-exynos4412: add myself as maintainer (MR 3100)
[ci:skip-vercheck]: Moving between categories doesn't require changing
pkgrel.
[ci:skip-build]: Already built successfuly on CI in MR
2022-05-06 18:52:01 +02:00
Newbyte
84deb8cc6e
samsung-m0: move to community (MR 3100) 2022-05-06 18:51:31 +02:00
Newbyte
aac3347c1c
linux-postmarketos-exynos4: move to community (MR 3100) 2022-05-06 18:51:30 +02:00
Newbyte
45ce85d198
soc-samsung-exynos4412: move to community (MR 3100) 2022-05-06 18:51:30 +02:00
Newbyte
72d5076fad
firmware-samsung-midas: move to community (MR 3100) 2022-05-06 18:51:30 +02:00
Alexander Martinz
1038e2670a
community/linux-postmarketos-qcom-sdm845: upgrade to 5.17.5 (MR 3118)
For a merge list, please see the merge commits:
  - 5.17.1 - (6151d07534)
  - 5.17.2 - (c8e2541a53)
  - 5.17.3 - (f7006752c1)
  - 5.17.4 - (ee8fb89013)
  - 5.17.5 - (b33c0511c5)

Change-Id: Ic1ec5571bd981aa6c24c619aac24ecd2a941d604
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: already built successfully in CI
2022-05-06 09:01:18 +02:00
Clayton Craft
c4d37a5a5b
device/main/firmware-siliconlabs-rs9116: move from community (MR 3061)
fw is used by the L5's wifi chip
2022-04-06 00:34:07 +03:00
Newbyte
0e9be207dd
device-*: replace mesa-dri-swrast with mesa-dri-gallium (MR 3059)
mesa-dri-swrast no longer exists and just installs,
mesa-dri-gallium. However, this might not always be the case, so
let's change it before it causes any issues.

[ci:ignore-count]
[ci:skip-build]
2022-04-05 23:23:03 +03:00
Newbyte
b2c4544ef2
device-*: rootston.ini -> phoc.ini (MR 3054)
rootston.ini is an old, deprecated name.

[ci:ignore-count]
2022-04-03 12:00:06 +02:00
Newbyte
fa2bae032d
samsung-espresso3g: depend on mesa-dri-gallium (MR 3048)
Resolves software rendering not working.
2022-04-02 16:50:05 +02:00
Minecrell
6c628d66ed
samsung-{a3,a5}: also apply ModemManager "facility lock" workaround (MR 3021)
It seems like at least samsung-a5 needs the same "facility lock"
workaround as samsung-serranove, otherwise ModemManager can not detect
the SIM card correctly. Move it to a subpackage of soc-qcom-msm8916
and apply it to samsung-a3 as well just to be sure.

So far this issue seems limited to Samsung devices, at least bq-paella
is not affected (tested with the same SIM card), so it does not seem
right to apply it unconditionally to all devices.

[ci:skip-build] Already built successfuly on CI in MR
2022-03-27 16:34:39 +02:00
Sicelo A. Mhlongo
2991b783d9
linux-nokia-n900: update kernel to LTS 5.15.31 (MR 3032)
[ci:skip-build] Already built successfuly on CI in MR
2022-03-26 22:42:27 +01:00
Mighty
ed90e5dafe
linux-samsung-espresso3g: use mainline 5.17, not PowerVR fork (MR 3027)
[ci:skip-build] Already built fine on CI in MR
2022-03-26 16:20:16 +03:00
Mighty
865ff8dca6
device-samsung-espresso3g: remove GPU support and hacks (MR 3027) 2022-03-26 16:19:15 +03:00
Alexander Martinz
f28294c93b
community/linux-postmarketos-qcom-sdm845: upgrade to 5.17.0-r1 (MR 3031)
- Add support for sdm845-samsung-starqltechn
  - Fix touch for axolotl

Change-Id: Ie7073f450f207e9242b821b4971ce2be89ba6a54
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>

[ci:skip-build] Already built successfuly on CI in MR
2022-03-24 21:21:16 +01:00
Minecrell
d55c91d1f9
community/soc-qcom-msm8916: update ALSA UCM files (MR 3014)
- alcatel-idol347: add headphones
- Try to revert playback/capture priorities to maybe make automatic
  switching to headphones based on jack detection work a bit better.

[ci:skip-build] Already built successfuly on CI in MR
2022-03-23 10:01:27 +01:00
Minecrell
fbafdc5cba
bq-paella: update touchscreen module name in deviceinfo (MR 3014)
The driver has been renamed to prepare for potential upstreaming.
2022-03-23 09:59:04 +01:00
Minecrell
2be78249e4
community/linux-postmarketos-qcom-msm8916: upgrade to 5.17 (MR 3014)
- Update to Linux 5.17
- Upstreamed many more patches
- Probably many other things I forgot :)

Device changes:
  - alcatel-idol347:
    - Headphones
  - longcheer-l8910 (bq-paella):
    - Touch keys: Allow changing function from userspace
  - samsung-gprime:
    - Split into 3 variants: gprimeltecan, fortuna3g, fortunaltezt
    - Buttons, WiFi/BT, Vibrator
    - Display
    - Touchscreen
    - Sound/Modem
    - Sensors (Accelerometer/Magnetometer, depending on variant)
    - NFC (some variants only)
    - Battery
  - samsung-j5x (J5 2016):
    - WiFi/BT
    - Sensors (Accelerometer)
    - Sound/Modem (jack detection is somewhat broken)

New devices:
  - ark-peach (ARK Benefit A3)
    - eMMC, SD card, USB, Buttons, WiFi/BT
  - huawei-y635:
    - eMMC, SD card, USB, Buttons, WiFi/BT
    - Display
    - Touchscreen
    - Sensors (Accelerometer, Proximity)
    - Sound
    - Battery/Charging
  - samsung-a5-zt: new device variant of samsung-a5
    - different setup for accelerometer and touch key
  - samsung-e7:
    - eMMC, SD card, USB, Buttons, WiFi/BT
    - Display (no brightness control yet)
    - Touchscreen
    - Sensors (Accelerometer)
    - Sound/Modem
    - NFC
  - samsung-j3ltetw:
    - eMMC, SD card, USB, Buttons, WiFi/BT
    - Display (no brightness control yet)
    - Touchscreen
    - Sensors (Accelerometer)
    - Sound/Modem
  - samsung-on7:
    - eMMC, SD card, USB, Buttons, WiFi/BT

Removed devices:
  - oppo-a51f: Unfortunately, it has been unmaintained for a long time
    and it was the last remaining device in a non-upstreamable state
    (authorship unclear and missing Signed-off-by).
2022-03-23 09:59:04 +01:00
Joel Selvaraj
367e1484e8
community/linux-postmarketos-qcom-sdm845: upgrade to 5.17.0 (MR 2982) 2022-03-22 12:29:45 +01:00
Joel Selvaraj
1969218aec
community/soc-qcom-sdm845: update ucm conf and add q6voiced for call audio support (MR 2982)
Also, moving the modemmanager.conf file from the main package to the
nonfree-firmware subpackage as Modem Manager is going to work
only if the nonfree-firmwares are present.
2022-03-22 12:29:44 +01:00
Joel Selvaraj
3865de4dca
community/device-xiaomi-beryllium: add q6voiced conf and fix dependency (MR 2982)
The soc-qcom-sdm845-nonfree-firmware dependency is now moved from
firmware-xiaomi-beryllium package to the device package.
This will make the firmware package to only depend on firmware files.
2022-03-22 12:29:44 +01:00
Joel Selvaraj
2ed40be4a1
community/device-oneplus-enchilada: add q6voiced conf and fix dependency (MR 2982)
The soc-qcom-sdm845-nonfree-firmware dependency is now moved from
firmware-oneplus-sdm845 package to the device package.
This will make the firmware package to only depend on firmware  files.
2022-03-22 12:29:44 +01:00
Joel Selvaraj
f0272470e9
community/device-oneplus-fajita: fix dependency (MR 2982)
The soc-qcom-sdm845-nonfree-firmware dependency is now moved from
firmware-oneplus-sdm845 package to the device package.
This will make the firmware package to only depend on firmware  files.
2022-03-22 12:29:44 +01:00
Joel Selvaraj
8b0eca4231
community/firmware-oneplus-sdm845: remove soc-qcom-sdm845-nonfree-firmware dependency (MR 2982)
The soc-qcom-sdm845-nonfree-firmware dependency is now moved from
firmware-oneplus-sdm845 package to the device package.
This will make the firmware package to only depend on firmware  files.
Also, pmb:cross-native is added to the package options so CI testcases
doesn't fail.
2022-03-22 12:29:44 +01:00
Joel Selvaraj
aa80a81e38
community/firmware-xiaomi-beryllium: remove soc-qcom-sdm845-nonfree-firmware dependency (MR 2982)
The soc-qcom-sdm845-nonfree-firmware dependency is now moved from
firmware-xiaomi-beryllium package to the device package.
This will make the firmware package to only depend on firmware files.
Also, pmb:cross-native is added to the package options so CI testcases
doesn't fail.
2022-03-22 12:29:43 +01:00
Dylan Van Assche
1ffe798a68
device-odroid-hc2: use different name for old rootfs (MR 3009)
It became too confusing by using almost the same name for the old rootfs when booting from HDDs

[ci:skip-build] already built successfully in CI
2022-03-19 00:29:47 -07:00
tim
0cea31a837
google-veyron-jerry: add initfs modules and update kernel config (MR 3004)
[ci:skip-build] already built successfully in CI
2022-03-19 00:27:27 -07:00
Dylan Van Assche
456cb2205f
linux-odroid-hc2: upgrade to 5.16.14 (MR 3006)
[ci:skip-build]: already built successfully in CI
2022-03-16 08:59:38 +01:00
Dylan Van Assche
8dc7bade2f Revert "linux-odroid-hc2: upgrade to 5.16.14"
This reverts commit f6fbe3584a.
2022-03-15 17:46:52 +01:00
Dylan Van Assche
f6fbe3584a linux-odroid-hc2: upgrade to 5.16.14 2022-03-15 17:43:52 +01:00
Martijn Braam
ff27c27bea
linux-postmarketos-rockchip: upgrade to 5.16.8 (MR 2923)
Dropped patches that are now present in stable linux.
Forward ported the EFI IGNOREME patch to 5.16
Enabled a few very common pcie network adapters
2022-03-11 16:36:55 +01:00
Alexander Martinz
5ec32e252e
linux-postmarketos-qcom-sdm845: upgrade to 5.16.12 (MR 2986)
For a merge list, please see the merge commits:
  - 5.16.6  - (521f32a4e0)
  - 5.16.7  - (36f968514b)
  - 5.16.8  - (3023f6e3b7)
  - 5.16.9  - (a87b941715)
  - 5.16.10 - (eb85bcb0a3)
  - 5.16.11 - (73291a1c42)
  - 5.16.12 - (77c0e13ec3)

Change-Id: I806a2c57793e7815d24b57cf46621b9ec5d10f3b
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>

[ci:skip-build] Already built fine on CI in MR
2022-03-07 20:31:37 +01:00
Yassine Oudjana
79be2d5074
community/linux-postmarketos-qcom-msm8996: upgrade to 5.16.12 (MR 2979)
- Add support for the rear camera on xiaomi-scorpio
- Improve charging from SDPs
- Add extcon support on oneplus-oneplus3(t)
- Add container and zram kconfig checks to APKBUILD

[ci:skip-build] Already built successfuly on CI in MR
2022-03-05 10:57:38 +01:00
Raymond Hackley
9833cc8a64
samsung-{a3,a5,a7,klte,serranove}: move tm2-touchkey rules to pmos-base (MR 2926)
Fixes: #1422
2022-03-03 19:21:20 +03:00
Sicelo A. Mhlongo
18046f68f2
linux-nokia-n900: update to latest stable kernel (MR 2964)
- update to kernel 5.15.25 stable
- add TUN as module, fixes pma#1435
- drop fully-upstreamed patches (lp55xx)
- add iio support for lis302dl (will send upstream)
- update N900 dts for lis302dl over iio (will send upstream)
- assign higher priority to patches from kernel.org (resolves pmb#2107)

[ci:skip-build] already built successfully in CI
2022-02-26 22:36:23 +01:00
Alexander Martinz
fac272225b
linux-postmarketos-qcom-sdm845: upgrade to 5.16.5 (MR 2899)
For a merge list, please see the merge commits:
  - 5.16.3 - (98fb3b4121)
  - 5.16.4 - (2962c41f9d)
  - 5.16.5 - (9ee391628f)

Change-Id: If5ba0303b6a9a636ec1f303739804a9fa9c37e2a
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>

[ci:skip-build] Already built successfuly on CI in MR
2022-02-06 10:39:07 +01:00
Bart Ribbers
9d44b34602
linux-postmarketos-qcom-sdm845: move to device/community (MR 2882) 2022-01-26 12:18:52 +01:00
Bart Ribbers
5c47fe52c4
linux-postmarketos-qcom-msm8996: move to device/community (MR 2882) 2022-01-26 12:18:52 +01:00
Bart Ribbers
256d491485
linux-postmarketos-qcom-msm8916: move to device/community (MR 2882) 2022-01-26 12:18:52 +01:00
Bart Ribbers
e971500118
linux-postmarketos-rockchip: move to device/community (MR 2882) 2022-01-26 12:18:52 +01:00
Oliver Smith
eb21ed5472
device/*/device-*: rebuild for new splash screens (MR 2222)
[ci:ignore-count]
2022-01-22 13:40:33 +01:00
Sicelo A. Mhlongo
34cb59086f
linux-nokia-n900: workaround for modem regression (MR 2852)
This is a cherry pick of Leste commit 2c7e4a1ac8ec1f908927793e893566aac3dcb9df,
to revert mainline commit f959dcd6ddfd29235030e8026471ac1b022ad2b0, which breaks
N900 modem. This is a temporary workaround until a proper fix is found.
2022-01-15 12:39:58 +02:00
Mighty
6374a1aaba
samsung-espresso3g: Fix Xorg (with our kernel) (MR 2822) 2022-01-09 12:32:40 +01:00
Sicelo A. Mhlongo
1b070346cc
linux-nokia-n900: upgrade to 5.15.13 and improve wlan (MR 2831)
* upgrade kernel to 5.15.13
* add patch for better nl80211 support in wl1251
* add config options to support iwd

[ci:skip-build] Already built on CI in MR
2022-01-09 08:37:23 +03:00
Sicelo
96b2dfc3c9
nokia-n900: update maintainers (MR 2817)
[ci:skip-build]: already built successfully in CI
2022-01-07 12:00:59 +01:00
Mighty
3f31844ae9
linux-samsung-espresso3g: config updates & backlight fix (MR 2818)
Enable RFKILL and disable CONFIG_BATTERY_BQ27XXX, fix backlight

[ci:skip-build] already built successfully in CI
2022-01-05 16:10:40 -08:00
Danct12
97d48d1e34
linux-nokia-n900: upgrade kernel to 5.15.12 (MR 2814)
[ci:skip-build]: already built successfully in CI
2022-01-04 04:22:48 +01:00
Jakob Hauser
9abe7e28b2
samsung-serranove: add udev rule for modem (MR 2800)
Due to a regression in ModemManager 1.18.2, a special case to reduce
facility lock query was implemented in ModemManager. Versions up to
1.18.6 need to be patched (separate merge request, possibly in Alpine
Linux). For more details, see pmaports issue #1274.

This udev rule makes use of this special case for device
samsung-serranove.
2022-01-02 16:03:12 +01:00
Mighty
084076cab9
linux-samsung-espresso3g: Various fixes and improvements (MR 2789)
linux-samsung-espresso3g: Add support for gp2a light and proximity sensor

linux-samsung-espresso3g: Display now runs at 45Hz

linux-samsung-espresso3g: Add pinmux for wlan host wake

linux-samsung-espresso3g: Add TWL 6030 power off support

linux-samsung-espresso3g: Add TWL 6030 power button support

linux-samsung-espresso3g: Data Enable is active high

linux-samsung-espresso3g: Fix patch
2021-12-28 19:57:16 +01:00
Bart Ribbers
f2634e66e9
pine64-pinebookpro: fix audio with alsa-ucm-conf>=1.2.6.x (MR 2743) 2021-12-21 09:36:49 -08:00
Bart Ribbers
9502d6e221
pine64-pinetab: fix audio with alsa-ucm-conf>=1.2.6.x (MR 2743) 2021-12-21 09:36:48 -08:00
Dylan Van Assche
d5c96ecc4c
linux-odroid-hc2: upgrade to 5.15.7 (MR 2774)
And add patches for CVE-2021-39685

[ci:skip-build] Already built on CI in MR
2021-12-19 23:35:42 +03:00
Mighty
31f7a6d25f
device-samsung-espresso3g: enable automatic kernel upgrades (MR 2766)
Small tweaks:
* enable atomatic flashing of kernel to boot partition on upgrades
* remove rootston.ini
2021-12-19 20:25:26 +03:00
Mighty
427c31262e
linux-samsung-espresso3g: Fix kconfig for newer gcc (MR 2767) 2021-12-17 21:58:28 -08:00
Mighty
8c3abf9a1d
linux-samsung-espresso3g: backport fixes for CVE-2021-39685 (MR 2763)
[ci:skip-build] Already built on CI in MR
2021-12-17 16:49:19 +03:00
Minecrell
717130ccfe
community/linux-asus-me176c: upgrade to 5.4.165 (MR 2756)
Should fix CVE-2021-39685

[ci:skip-build] Already built on CI in MR
2021-12-16 19:32:18 +03:00
Clayton Craft
69634b878e
device/community/firmware-pine64-rockpro64: move from testing (MR 2727)
Devices that depend on this are in community.

[ci:skip-build] already built successfully in CI
2021-12-05 21:30:20 -08:00
Clayton Craft
bbec68b244
device/community/firmware-odroid-hc2: move from testing (MR 2726)
I suspect this was missed when the Odroid HC2 device was moved to
community.

[ci:skip-build] already built successfully in CI
2021-12-05 21:22:52 -08:00
Yassine Oudjana
f3e6d4f227
xiaomi-scorpio: flash the kernel automatically (MR 2721)
Enable automatic kernel flashing on update.
2021-12-05 22:02:30 +01:00
Yassine Oudjana
1a52b9c78f
xiaomi-scorpio: add DRM to the initramfs (MR 2721)
Add DRM modules and GPU firmware to the initramfs.
2021-12-05 22:02:26 +01:00
Jakob Hauser
c655f5cc9c
samsung-a3|a5|klte|serranove: remap left touch key (MR 2718)
Remapping the left key of tm2-touchkey to KEY_MENU.

The KEY_APPSELECT, which is set by the device tree, is not available in
the postmarketOS UIs. In X11 UIs this is due to keycode limitation to
8 bit. In Wayland UIs the keycodes don't have this limitation but xkb
keycodes higher 255 are not processed correctly by several software
packages. It still makes sense to keep KEY_APPSELECT in the device tree
because this is the correct mapping intended by the manufacturers when
running the kernel on Android.
2021-12-05 21:34:10 +01:00
Dylan Van Assche
415ff553f0
linux-odroid-hc2: upgrade to 5.15.5 (MR 2724)
Tested on my ODROID HC2 running edge

[ci:skip-build]: already built successfully in CI
2021-12-05 21:12:03 +01:00
Nikita Travkin
8df6c1c0f7
wileyfox-crackling: Add udev rule for proximity sensor (MR 2700)
iio-sensor-proxy wants to know when to report "near" status. Add an udev
rule defining that value as a workaround untl it can be passed from
the DT.

[ci:skip-build] already built successfully in CI
2021-12-01 13:11:09 -08:00
Danct12
7ffeea5cb7
device-nokia-n900: fix u-boot script typo (MR 2708) 2021-11-26 20:08:50 +00:00
Nikita Travkin
351c24206f
community/soc-qcom-msm8916: add udev rule for pm8916 haptics (MR 2699)
Feedbackd needs to know which device to use for haptics. Add an udev
rule to mark haptics device in the pm8916.
2021-11-23 15:39:31 +01:00
Mighty
b2d88000b8
samsung-espresso3g: add nonfree userland packages (MR 2651)
[ci:skip-build]: already built successfully in CI
2021-11-22 11:41:23 +01:00
Mighty
1c1dbf2363
linux-samsung-espresso3g: upgrade to 5.15.2 (MR 2651) 2021-11-22 11:40:16 +01:00
Mighty
b78fcd1794
samsung-espresso3g: use minimal .ini file for phosh (MR 2651) 2021-11-22 11:40:01 +01:00
Mighty
0ff5a34c3f
samsung-espresso3g: update pkgver and remove unneeded dependency (MR 2651) 2021-11-22 11:39:53 +01:00
Mighty
5b03579500
samsung-espresso3g: move to community (MR 2651) 2021-11-22 11:39:41 +01:00
Minecrell
3a9898689d
<msm8916>: drop variant suffixes from dtb names (MR 2632)
The new kernel version now has the variant suffixes dropped from the
DTB file names as well.
2021-11-21 19:10:58 +01:00
Minecrell
46a7f0ae08
community/arrow-db410c: add _pmb_select="soc-qcom-msm8916-rproc" (MR 2632)
This allows disabling the modem explicitly to get a bit more RAM.
It's also not _particularly_ useful on DB410c because it only provides GPS.
2021-11-21 19:10:58 +01:00
Minecrell
dd935c0d58
community/<msm8916>: use _pmb_select="..." instead of kernel variants (MR 2632) 2021-11-21 19:10:58 +01:00
Minecrell
a9412824ea
community/soc-qcom-msm8916: introduce more flexible rproc selection (MR 2632)
Add a replacement for the current "mainline" and "mainline-modem"
kernel variants used for the MSM8916 devices. At the moment this is
implemented using separate DTBs that are all maintained in the kernel.

Unfortunately, this does not seem likely to be accepted upstream in
the mainline kernel. They will expect to have only a single DTB that
enables all available functionality. The "no-modem" variant is a minor
but still very useful use case because it changes the audio routing:
It allows audio to work without any firmware, with more control on
sample rates, latency etc for advanced audio use cases. However,
having a potentially enabled modem requires routing all audio through
the modem. There are two separate DTBs needed for these two setups.

To avoid burdening mainline with this use case, the idea is to apply
the necessary DTB transformations as part of the lk2nd boot process.
Mainline only contains the DTB with the full functionality (audio
routed through modem). The soc-qcom-msm8916-rproc packages place
a magic file at /boot/lk2nd_rproc_mode that is read by lk2nd. When
the file contains "no-modem" lk2nd will transform the DTB to disable
the modem and change the audio routing to bypass the modem.

That way, this feature does not need to be considered in mainline
at all but can still be offered as "nice to have" by lk2nd. It also
simplifies the device packages because the selection is now common
as part of the soc-qcom-msm8916 package.

Together with a related pmbootstrap change there is a nice prompt
for selecting one of these "rproc" providers:

     $ pmbootstrap init
     [...]
     Available providers for soc-qcom-msm8916-rproc (3):
      * all: Enable all remote processors (audio goes through modem) (**default**)
      * no-modem: Disable only modem (audio bypasses modem, ~80 MiB more RAM)
      * none: Disable all remote processors (no WiFi/BT/modem, ~90 MiB more RAM)
     Provider [default]: ...
2021-11-21 19:10:58 +01:00
Minecrell
04f2850483
community/linux-asus-me176c: upgrade to 5.4.159 (MR 2685)
[ci:skip-build]: already built successfully in CI
2021-11-18 18:06:47 +01:00
Minecrell
eff90a2071
<msm8916+secure boot-venus>: use separate firmware packages (MR 2619)
Rule D: Devices with secure boot and venus present in the firmware
        partition need:

  1. GPU firmware (firmware-qcom-adreno-a300)
  2. msm-firmware-loader (for wcnss, modem, venus)
  4. device-specific -wcnss-nv firmware

[ci:ignore-count]
[ci:skip-build] already built successfully in CI
2021-10-23 14:41:30 -07:00
Minecrell
f84cb52a7f
<msm8916+secure boot+venus>: use separate firmware packages (MR 2619)
Rule C: Devices with secure boot but without venus on the firmware
        partition need:

  1. GPU firmware (firmware-qcom-adreno-a300)
  2. msm-firmware-loader (for wcnss, modem)
  4. device-specific -wcnss-nv firmware
  5. device-specific -venus firmware
2021-10-23 14:41:29 -07:00
Minecrell
c72ed66a27
<msm8916-secure boot+modem>: use separate firmware packages (MR 2619)
Rule A: Devices without secure boot need:
  1. GPU firmware (firmware-qcom-adreno-a300)
  2. msm-firmware-loader (for modem)
  3. firmware-qcom-msm8916-wcnss: more recent wcnss firmware
  4. device-specific -wcnss-nv firmware
  5. firmware-qcom-msm8916-venus: some packaged venus firmware
2021-10-23 14:41:29 -07:00
Minecrell
67176df2f6
arrow-db410c: use separate firmware packages (MR 2619)
Reduce rootfs size a bit by installing the separated firmware packages
instead of the large linux-firmware-qcom package. Also, install the
modem firmware by default to prepare for enabling GPS.
2021-10-23 14:41:29 -07:00
Minecrell
0b269a5601
firmware-<msm8916>: squash firmware blobs (MR 2619)
Squash the packaged venus firmware blobs using pil-squasher so only
one file needs to be loaded rather than many small ones. Linux detects
squashed (.mbn) vs non-squashed (.mdt + .b*) based on file contents
(not file name) so it is fine to install venus.mbn to venus.mdt.
2021-10-23 14:41:29 -07:00
Minecrell
3193027687
community/firmware-bq-picmt: squash firmware blobs (MR 2619)
Strictly speaking firmware-bq-picmt is not needed anymore because
the msm-firmware-loader can be used to load the picmt firmware from
the firmware partitions. However, this package contains quite recent,
largely unmodified firmware from Qualcomm so it still seems useful
to keep if someone wants to test more recent firmware on some other
device (provided that their device does not verify firmware signatures).

To make this firmware package consistent with firmware-qcom-db410c,
squash the firmware blobs using pil-squasher so only one file needs
to be loaded rather than many small ones.
2021-10-23 14:41:29 -07:00
Minecrell
1d923c2aeb
community/firmware-qcom-db410c: package all firmware, squash, new paths (MR 2619)
Unfortunately, at the moment MSM8916 devices always have to install
all of linux-firmware-qcom (~ 60 MiB) when they actually just use
~ 0.008 MiB of GPU firmware in there. Everything else is just big
firmware blobs for other SoCs that are never going to be useful.

It's much more efficient to package the necessary firmware separately
to save rootfs space. The DB410c linux-board-support-package contains
all the firmware from linux-firmware as well, so we can easily package
it as part of the firmware-qcom-db410c package.

This commit makes the following changes to firmware-qcom-db410c:
  1. Package venus() firmware that was previously installed from
     linux-firmware-qcom. GPU firmware is packaged in firmware-qcom-adreno.
  2. Use new firmware paths for DB410c that were applied upstream
  3. "Squash" the firmware blobs to a single file using pil-squasher
2021-10-23 14:41:28 -07:00
Minecrell
d90dc7d4b3
community/firmware-qcom-adreno: new aport (MR 2625)
Add a new firmware-qcom-adreno APKBUILD that packages the GPU firmware
from upstream linux-firmware as separate packages. It is basically
a minimal replacement for linux-firmware-qcom that allows saving rootfs
space by installing only the firmware that is really relevant for the
device.

[ci:skip-build] already built successfully in CI
2021-10-23 14:32:53 -07:00
Minecrell
038186fd71
firmware-<msm8916>: drop unused firmware subpackages (MR 2613)
The firmware provided by these subpackages is now covered by the
msm-firmware-loader, so there is no need to build packages for them
anymore.

[ci:ignore-count]
2021-10-21 13:53:45 +02:00
Minecrell
0163ac2624
xiaomi-wt88047: fix replaces/provides of subpackages (MR 2613)
The "replaces"/"provides" should have the full package name, not just
the part of the subpackage. Also, the nonfree-firmware subpackage does
not need it because the old "device-xiaomi-wt88047-nonfree-firmware-modem-wt88047"
packages were only install_if packages without any files installed.
2021-10-21 13:53:45 +02:00
Nikita Travkin
ac582ac2f4
samsung-gt510: Move to community (MR 2604)
[ci:skip-vercheck][ci:skip-build] Already successfully built on CI
2021-10-21 13:41:33 +02:00
Nikita Travkin
b5d3515422
samsung-gt58: Move to community (MR 2604) 2021-10-21 13:40:59 +02:00
jenneron
15dd2115cf
lenovo-a6010: move to community (MR 2577)
[ci:skip-build]: already built successfully in CI
2021-10-17 13:36:18 +02:00
jenneron
4af1db6e9e
lenovo-a6000: move to community (MR 2577) 2021-10-17 13:35:17 +02:00
Alexey Minnekhanov
d343bb49c6
linux-asus-me176c: switch to installkernel-pmos (MR 2586)
[ci:skip-build] Will never finish in time
2021-10-14 12:28:25 +03:00
Alexey Minnekhanov
f4510ded35
linux-nokia-n900: switch to installkernel-pmos (MR 2586) 2021-10-14 12:28:21 +03:00
Jakob Hauser
b0cdf66653
main/postmarketos-ui-xfce4: further improvements (MR 2506)
Improvements from xfce4-phone source:
- Add screenshot to README.md
- Enable screen locking
- Disable Desktop icons "Home", "File System", "Trash"
- Enable single-click on Desktop
- Enable single-click in Thunar
- Change clock format
- Set postmarketos wallpaper

Additional changes in postmarketos-ui-xfce4:
- Installing greybird-themes (which is already set as default theme in
  /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xsettings.xml).
- Changing /etc/skel/.config/autostart/onboard-autostart.desktop to
  slightly speed up keysboard startup (overriding startup-delay of
  /etc/xdg/autostart/onboard-autostart.desktop).
- Enabling scrollbars by /etc/profile.d/enable-scrollbars.sh, this is
  helpful where touch-scrolling doesn't work like e.g. in whiskermenu.

(And re-ordered network-manager-applet in APKBUILD _pmb_recommends
section.)

Also removing xfce4 subpackages of device-qemu-amd64,
device-qemu-aarch64 and device-nokia-n900. The device specific monitor
to set the wallpaper will now be automatically derived from "monitor0"
in file xfce4-desktop.xml.

Additionally taking maintainership as discussed in merge request
(!2506).
2021-09-29 18:29:54 +03:00
Joel Selvaraj
6aea56cd98
firmware-xiaomi-beryllium: upgrade to V12.0.3.0.QEJMIXM (MR 2558) 2021-09-28 14:21:43 +02:00
Nikita Travkin
74b45d4afc
samsung-serranovelte: drop lte suffix, use msm-firmware-loader (MR 2431) 2021-09-27 15:54:04 +03:00
Minecrell
4662042bfa
wileyfox-crackling: use msm-firmware-loader (MR 2431) 2021-09-27 15:23:51 +03:00
Minecrell
e7364b1f21
bq-paella: use msm-firmware-loader (MR 2431) 2021-09-27 15:23:50 +03:00
Minecrell
74239f039e
motorola-harpia: use msm-firmware-loader (MR 2431) 2021-09-27 15:23:50 +03:00
Nikita Travkin
e24dc38ce5
xiaomi-wt88047: use msm-firmware-loader (MR 2431)
Switch to automatic firmware loading to handle regional variants of the
device automatically.
2021-09-27 15:23:50 +03:00
Nikita Travkin
a1688878a2
samsung-a5*: squash to a5, use msm-firmware-loader (MR 2431)
Right now we have multiple variants of A5 that are only different in
secure-boot keys and as such different firmware blobs.
Use msm-firmware-loader to support all A5 variants with a single device
port. Because of that, drop lte suffix as there are 3g variants as well.
2021-09-27 15:23:50 +03:00
Nikita Travkin
7c7f5c7300
samsung-a3*: squash to a3, use msm-firmware-loader (MR 2431)
Right now we have multiple variants of A3 that are only different in
secure-boot keys and as such different firmware blobs.
Use msm-firmware-loader to support all A3 variants with a single device
port. Because of that, drop lte suffix as there are 3g variants as well.
2021-09-27 15:23:50 +03:00
Johannes Marbach
95d375879c
treewide: firmware: use pmb:cross-native/!tracdeps (MR 2468)
Add pmb:cross-native/!tracedeps to applicable firmware packages and
secure both with a test.

This sets the pmb:cross-native and !tracedeps options on all firmware-*
packages that are compatible with the native compilation method. A unit
test ensures the presence of both options while maintaining a list of
exempted packages.

Fixes: #718
[ci:ignore-count] [ci:skip-vercheck] [ci:skip-build]
2021-09-19 18:57:36 +02:00
Dave Young
b7cc62d0c4
n900 kernel cmdline: s/tty02/ttyO2 (MR 2531)
Signed-off-by: Dave Young <dyoung@redhat.com>
2021-09-19 17:30:25 +02:00
Minecrell
26b44a94f7
device/soc-qcom-msm8916: replace msm-modem-rpmsg with msm-modem (MR 2535)
Starting with Linux 5.14, the modem can be controlled through the new
WWAN subsystem in Linux with the WWAN RPMSG CTRL driver. This is also
supported in ModemManager 1.18 and the pmOS fork of oFono.

Drop the udev rules for the previous approach through the RPMSG chardev
since this causes the modem to be detected twice by ModemManager and oFono.
2021-09-19 17:03:31 +02:00
bo41
79061c94ce
device/*: remove empty variables (MR 2534)
[ci:ignore-count] [ci:skip-vercheck]
[ci:skip-build]: built all the device packages successfully in CI
                 already
2021-09-19 16:56:34 +02:00
Dylan Van Assche
093488b82f
device-odroid-hc2: drop NetworkManager (MR 2455)
Console UI can be used now instead of None UI.
Console UI is necessary to have access to the device over SSH
as no display can be used.

[ci:skip-build] already built successfully in CI
2021-09-10 19:32:46 -07:00
Dylan Van Assche
c3b1eeda66
odroid-hc2: move to community (MR 2455)
This devices runs a close-to mainline kernel as linux-odroid-hc2.
I have 2 of these devices which power my selfhosted infrastructure
for some time now and they work really well! Running my selfhosted
infrastructure on Alpine stable releases would be great.
2021-09-10 19:32:45 -07:00
Clayton Craft
1bbc4a2f9d
pine64-pinebookpro: fix audio after 5.14 kernel upgrade (MR 2473)
ucm2 paths changed after the kernel upgrade

[ci:skip-build] already built successfully in CI
2021-09-07 15:51:18 -07:00
Clayton Craft
307c46d943
device-pine64-pinetab: change ucm2 install path to support 5.14 kernel (MR 2471)
with 5.14, there's some change to the path that alsa searches for ucm2
for this device. the install path for PineTab.conf is changed, and it
references "full" path to HiFi and VoiceCall profiles (which I kept in
`PineTab` dir, so that there could be several configs for the same
driver later on, if necessary/desired)

[ci:skip-build] already built successfully in CI
2021-09-05 13:43:09 -07:00
Clayton Craft
65bae8615b
device-*: don't use 'flavor' in kernel/initramfs names (MR 2426)
[ci:ignore-count]
[ci:skip-build] too many changed kernels/packages, won't complete in CI
2021-09-03 10:29:07 -07:00
Joel Selvaraj
a8cb30512f
device-xiaomi-beryllium: adjust phosh scaling (MR 2416)
The phosh scaling is made an integer to avoid scaling issues
in some apps and wallpaper.

[ci:skip-build] Already built on CI in MR
2021-08-26 02:14:48 +01:00
Joel Selvaraj
10f2001eb0
firmware-xiaomi-beryllium: upgrade to latest commit (MR 2416)
Contains venus firmware for hw accelerated video encoding and decoding.

Also, ipa firmware is moved to beryllium folder as mbn format instead of
mdt+bXX files.

The list of files in firmware.files is now file type-wise alphabetically
sorted. Just for better readability.
2021-08-26 02:14:47 +01:00
Caleb Connolly
ac8d589210
device-oneplus-fajita: 5.14 and phosh changes (MR 2416)
Fix deviceinfo to reference the new names for fg and haptics modules.

Bump phosh scaling to 3.0
2021-08-26 02:14:47 +01:00
Caleb Connolly
8d534e86cb
device-oneplus-enchilada: 5.14 and phosh changes (MR 2416)
Fix deviceinfo to reference the new names for fg and haptics modules.

Bump phosh scaling to 3.0
2021-08-26 02:14:47 +01:00
Joel Selvaraj
487333981f
soc-qcom-sdm845: 5.14 feedbackd fix and modemmanager suspend/resume support (MR 2416)
Fix the feedbackd rule as the haptics modules has been renamed.

Although SDM845 doesn't really suspend well, MM needs suspend
and resume support when the device attempts to suspend. Without
which MM will crash and wont resume properly when a suspend
action is triggered.

Depend on msm-modem-uim-selection to configure to modem for modemmanager
2021-08-26 02:14:15 +01:00
Nikita Travkin
1e7c23fb92
community/device-xiaomi-wt88047: Add new panel module (MR 2458)
[ci:skip-build] Already successfully built on CI
2021-08-24 14:45:03 +02:00
Nikita Travkin
f8c8a96389
community/soc-qcom-msm8916: Update ucm to use JackControl (MR 2458) 2021-08-24 14:43:35 +02:00
Bobby The Builder
16d91a3514
community/device-pine64-pinetab: disable sysrq config (MR 2447)
it's already disabled in kernel config:

      sysctl: cannot stat /proc/sys/kernel/sysrq: error code 2
       *   Unable to configure kernel parameters from /etc/sysctl.d/sysrq.conf
2021-08-22 19:24:17 +02:00
Bart Ribbers
2a185f64d5
pine64-rockpro64: add myself as co-maintainer (MR 2362)
[ci:skip-vercheck]
[ci:skip-build] already built successfully in CI]
2021-08-09 20:16:28 -07:00
Bart Ribbers
80d5c34ac7
pine64-rockpro64: move to community (MR 2362)
This device runs on linux-postmarketos-rockchip which at the moment of
writing is 5.13.0 with (only) 6 patches applied, so close-to mainline.
I personally use 2 of these devices with postmarketOS installed daily as
my homeserver setup and it has worked really well. It's also a good
target to run Plasma Bigscreen on as a TV setupbox
2021-08-09 20:06:37 -07:00
Caleb Connolly
9e2a6201d4
firmware-oneplus-sdm845: add venus firmware (MR 2418)
I forgot to include this firmware in the list, lets deal with that now
>.<

[ci:skip-build] already built successfully in CI
2021-08-09 20:04:03 -07:00
Clayton Craft
f9932a0850
device-pine64-pinebookpro: add Clayton as maintainer (MR 2352) 2021-08-02 11:30:50 -07:00
Clayton Craft
0001e6cad8
device-pine64-pinebookpro: move to community (MR 2352) 2021-08-02 11:30:50 -07:00
Clayton Craft
30d41b8e89
firmware-pine64-pinebookpro: move to community (MR 2352) 2021-08-02 11:21:34 -07:00
Bobby The Builder
4a594d22b1
device-pine64-pinetab: remove cma from boot args (MR 2371)
default value already defined:
   Symbol: CMA_SIZE_MBYTES [=256]
   Type  : integer
   Defined at kernel/dma/Kconfig:134
2021-07-22 23:54:02 -07:00
Yassine Oudjana
ca02197e70
device-xiaomi-scorpio: enable big cluster (MR 2365)
Now that CPU scaling is enabled, there is no need to disable the big cluster,
which was hurting performance before by staying at 19.2 MHz. Remove maxcpus=2
from the command line arguments.

[ci:skip-build] Already built successfully on CI
2021-07-20 23:04:37 +03:00
Ultracoolguy
88f2ff05fa
soc-qcom-msm8916: Update ucm to include motorola-ocean (MR 2350) 2021-07-19 07:48:10 +02:00
Yassine Oudjana
69498c9489
soc-qcom-msm8996: Rename haptics udev rule (MR 2339)
The update to Linux v5.13.1 also includes updating the haptics driver
to the latest one posted to the mailing lists, which was renamed to
qcom-spmi-haptics. Rename the udev rule for this driver and update the
driver name in it.

[ci:skip-build] already built successfully in CI
2021-07-12 10:46:22 -07:00
Caleb Connolly
4158c8361f
firmware-oneplus-sdm845: upgrade firmware to latest (MR 2332)
Upgrade the firmware files to files pulled from the latest OTA (OOS 11
beta 21.05.11).
2021-07-10 05:38:59 +03:00
Clayton Craft
f1e0404fb8
device/*: set gpu_accelerated for devices that show '3D=Y' on wiki (MR 2078)
[ci:ignore-count]
[ci:skip-vercheck] needed for the postmarketos-ui-* packages in this
series
[ci:skip-build] already built ui-* packages in CI, and device pacakges
are just trivial deviceinfo change (manually built some just to verify)
2021-07-07 08:06:17 +03:00
Nikita Travkin
e9e9a74b1d
soc-qcom-msm8916: use msm-modem-uim-selection (MR 2291)
Some msm8916 devices, primarily with two sim slots, require slot
to be selected. Install uim-selection script for all msm8916 devices
with modem enabled.

[ci:skip-build] already built successfully in CI
2021-07-05 07:41:23 +03:00
Danct12
3dd89c9a5e
linux-nokia-n900: upgrade to kernel 5.7.19 + build zram module (MR 2308)
Signed-off-by: Danct12 <danct12@disroot.org>
2021-07-04 11:51:42 +02:00
Minecrell
4c666d67aa
arrow-db410c: also include DTB in "second" part of boot image (MR 2297)
I sometimes test DB410c via mainline U-Boot, which wants to have the
DTB in the "second" part of the Android boot image. Otherwise it works
fine. Include it there additionally to simplify this.

[ci:skip-build] already built successfully in CI
2021-07-02 13:49:18 -07:00
Clayton Craft
72baa9ee0c
linux-nokia-n900: enable missing kconfig for nftables support (MR 2284) 2021-07-01 09:05:15 +03:00
Yassine Oudjana
b627285177
device-xiaomi-scorpio: Add RMTFS to runlevel default (MR 2283)
Having RMTFS at runlevel boot makes it start the modem too fast and causes
crashes. Move it to runlevel default with a post-install.

[ci:skip-build] already built successfully in CI
2021-06-30 22:19:07 -07:00
Alexey Minnekhanov
fe4c16f810
pine64-pinetab: Resign from maintaining (MR 2281)
My engineering prototype 1 Gb pinetab is close to unusable,
so I can't use it to test pmOS. Also, PINE64 is no longer
selling these devices, and the ones that were sent previously
to some developers use different display panel anyway.

Martijn Braam and Dylan Van Assche agreed to maintain it.

[skip ci]
2021-06-27 16:29:15 +02:00
Joel Selvaraj
c78c633a06
device-xiaomi-beryllium: move device to community (MR 2257)
Adds OSK-SDL support, automatic kernel update support and
move device to community.
2021-06-25 22:09:44 +02:00
Clayton Craft
cfc8f7b12c
linux-asus-me176c: add kconfig check for nftables (MR 2060) 2021-06-14 14:04:37 -07:00
Clayton Craft
035896c571
linux-nokia-n900: enable nftables support (MR 2060)
Based on https://wiki.gentoo.org/wiki/Nftables#Kernel
2021-06-14 13:29:34 -07:00
Yassine Oudjana
ee581e5f16
device-xiaomi-scorpio: update and move to community (MR 2188)
- Add SLPI to nonfree_firmware description
- Add touchscreen and fuel gauge modules to the initramfs in preparation for
  osk-sdl and charging-sdl (or any new alternative) support
- Add pointercal file for osk-sdl

[ci:skip-vercheck]
2021-06-11 12:07:35 +02:00
Yassine Oudjana
14b1e693a5
firmware-xiaomi-scorpio: update and move to community (MR 2188) 2021-06-11 12:06:44 +02:00
Yassine Oudjana
b9a124c591
soc-qcom-msm8996: update and move to community (MR 2188)
Add linux-firmware-qcom as a dependency for nonfree_firmware to provide
non-signed GPU firmware.
2021-06-11 12:06:33 +02:00
Jakob Hauser
6614be1f17
device/community: add swclock-offset dependency for affected SoCs (MR 2241)
Set package dependency "swclock-offset" to "soc-qcom-msm8916" and
"soc-qcom-sdm845".

These SoC's have a read-only real-time clock (RTC). The package
"swclock-offset" keeps an offset between the RTC and the system time.
2021-06-10 18:29:24 +03:00
Caleb Connolly
62e5d30506
device-oneplus-fajita: flash the kernel automatically (MR 2215)
postmarketos-update-kernel works for us (with !2214)!
2021-06-08 10:44:42 -07:00
Caleb Connolly
0736f49759
device-oneplus-enchilada: flash the kernel automatically (MR 2215)
postmarketos-update-kernel works for us (with !2214)!
2021-06-08 10:44:42 -07:00
Dylan Van Assche
9125d49e8e
device-pine64-pinetab: improve PulseAudio sample rate 2021-06-02 18:57:54 +02:00
Caleb Connolly
be94e89c02
device-oneplus-fajita: fix osk-sdl (MR 2206)
Add the missing depends to add the GPU firmware to the initramfs
so that osk-sdl works properly, as well as the haptics driver.

Also make all logs go to UART, this will clean up the splash screen and
let developers with UART access debug the boot process.

[ci:skip-build] This MR was already built on CI
2021-06-01 21:13:39 +03:00
Caleb Connolly
8fe6b73d06
device-oneplus-enchilada: add audio and fix osk-sdl (MR 2206)
Add the missing depends for our soc package alsa ucm configs. Also add
the missing depends to add the GPU firmware to the initramfs so that
osk-sdl works properly!

Also enable logs and point them to UART, this will clean up the splash
screen and let any developers with UART attached to debug the boot
process.
2021-06-01 21:13:11 +03:00
Caleb Connolly
83413def86
soc-qcom-sdm845: update ucm profiles for op6 (MR 2206) 2021-06-01 21:13:08 +03:00
Oliver Smith
5d59fd43b9
pine64-pinetab: upower: replace config properly (MR 2205) 2021-05-30 17:01:39 +02:00
Dylan Van Assche
ead17254db
device-pine64-pinetab: shutdown on critical battery (MR 2193)
The PMIC AXP803 sends an interrupt to the A64 CPU when the
battery is critical low. This wakes up the tablet at ~10%
battery level, but UPower wasn't configured to add upon
this interrupt as the action level was way lower.
Therefore, the PMIC performed a hard shutdown when the
battery level dropped further, which may cause data loss.
2021-05-30 15:53:12 +02:00
Bart Ribbers
248989c316
pine64-pinetab: depend on u-boot >= 2021.01_git20201228-r2 (MR 2149) 2021-05-27 14:13:16 +02:00
Oliver Smith
99eb9b2fb5
pine64-pinetab: lower headphone volume to 70% (MR 2182) 2021-05-21 20:02:39 +02:00
Oliver Smith
21a2b0f5ea
pine64-pinetab: add gtk4 artifacts workaround (MR 2132) 2021-05-21 00:44:57 +02:00
Dylan Van Assche
094f15a104
device-pine64-pinetab: increase maximum volume headphone jack (MR 2170)
Headphones are not so quiet anymore from now on!
2021-05-20 13:08:26 +02:00
Bart Ribbers
27b8ef368f
*/*: replace uboot-tools dependency for u-boot-tools (MR 2141)
uboot-tools is provided by u-boot-tools but sometimes apk still gets
confused. This change prevents errors such as

pine64-pinephone:~$ sudo apk upgrade --verbose
WARNING: Failed to perform initial self-upgrade, continuing with full upgrade.
ERROR: unable to select packages:
  uboot-tools (virtual):
	    provided by: u-boot-tools
			    required by: device-pine64-pinephone-0.25-r1[uboot-tools]
[ci:ignore-count]
[ci:skip-build]: already built in CI successfully
2021-04-27 22:01:06 +02:00
Minecrell
96c3a7450a
community/samsung-a3(u)lte: enable screen in initfs (MR 2110)
As of MR 2039, the kernel modules are now stripped (INSTALL_MOD_STRIP=1).
It turns out that this massively reduces their size so that including
the panel + touchscreen modules in the initfs still fits into the
partition. This allows the splash screen and osk-sdl to work correctly.
2021-04-17 23:04:44 -07:00
Minecrell
7a8b981dba
community/samsung-serranovelte: enable screen in initfs (MR 2110)
As of MR 2039, the kernel modules are now stripped (INSTALL_MOD_STRIP=1).
It turns out that this massively reduces their size so that including
the panel + touchscreen modules in the initfs still fits into the
partition. This allows the splash screen and osk-sdl to work correctly.
2021-04-17 23:04:44 -07:00
Minecrell
2b54e057b5
community/samsung-a5(u)lte: enable screen in initfs (MR 2110)
As of MR 2039, the kernel modules are now stripped (INSTALL_MOD_STRIP=1).
It turns out that this massively reduces their size so that including
the panel + touchscreen modules in the initfs still fits into the
partition. This allows the splash screen and osk-sdl to work correctly.
2021-04-17 23:04:44 -07:00
Minecrell
d463361835
community/motorola-harpia: enable screen in initfs (MR 2110)
As of MR 2039, the kernel modules are now stripped (INSTALL_MOD_STRIP=1).
It turns out that this massively reduces their size so that including
the panel + touchscreen modules in the initfs still fits into the boot
partition. This allows the splash screen and osk-sdl to work correctly.
2021-04-17 23:04:44 -07:00
Clayton Craft
e3715a2d4e
main/linux-purism-librem5: move from community (MR 2096)
[ci:skip-vercheck]: moving unchanged packages
[ci:skip-build]: moving unchanged packages
2021-04-17 22:41:10 -07:00
Clayton Craft
313bb89139
main/device-purism-librem5: move from community (MR 2096) 2021-04-17 22:40:45 -07:00
Clayton Craft
23b54b0f05
{device,linux}-purism-librem5: Add Bhushan Shah as co-maintainer (MR 2096) 2021-04-17 22:40:26 -07:00
Caleb Connolly
99f5924d47
device-oneplus-fajita: osk-sdl support and cleanup (MR 2088)
Make needed deviceinfo changes to support osk-sdl, add "quiet" to the
cmdline and bump the package version to 1.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
[ci:skip-vercheck]
2021-04-16 19:21:27 +02:00
Caleb Connolly
0d7b714f4a
device-oneplus-enchilada: osk-sdl support and cleanup (MR 2088)
Make needed deviceinfo changes to support osk-sdl, add "quiet" to the
cmdline and bump the package version to 1.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
2021-04-16 19:20:52 +02:00
Caleb Connolly
7ef84a37fc
firmware-oneplus-sdm845: add firmware to initramfs (MR 2088)
Add a subpackage to ensure that GPU firmware is included in initramfs so
that osk-sdl can work.

[ci:skip-vercheck]

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
2021-04-16 19:13:07 +02:00
Caleb Connolly
36eca9bdda
soc-qcom-sdm845: move to community (MR 2088)
[ci:skip-vercheck]
2021-04-16 19:13:07 +02:00
Caleb Connolly
32b488e401
firmware-oneplus-sdm845: move to community (MR 2088) 2021-04-16 19:13:06 +02:00
Caleb Connolly
11be4d37ab
device-oneplus-fajita: move to community (MR 2088) 2021-04-16 19:13:05 +02:00
Caleb Connolly
507adfddbe
device-oneplus-enchilada: move to community (MR 2088) 2021-04-16 19:13:04 +02:00
Minecrell
c1c42c74b8
community/xiaomi-wt88047: move from testing (MR 2073)
[ci:skip-vercheck]: No meaningful change here
2021-04-16 13:16:45 +02:00
Oliver Smith
caae6d5405
treewide: bump pkgrel to generate new splashes (MR 1996) 2021-04-11 19:52:37 +02:00
Bobby The Builder
259c9eefe5
pine64-*: change default RAM clock from 552 to 528 (MR 1998)
Issue #981 Change default clock from 552 to 528
(latest batches such as KDE are having issues with 552)
2021-04-05 11:14:18 +02:00
Bobby The Builder
5322350898
temp/u-boot-pinephone: build with 3 RAM clocks (MR 1998)
U-Boot package will be built and packaged with tree
different images, each with a custom RAM clock.

Supported clocks: 528, 552 and 624
2021-04-05 11:14:13 +02:00
Clayton Craft
de0bc01e34
purism-librem5: fix bluetooth by disabling LE mode (MR 2089)
This forces coex. mode to only support BT classic/EDR, and disabled LE.
When LE coex. is enabled, BT controller init fails.

see: https://gitlab.com/postmarketOS/pmaports/-/issues/1042
fixes: https://gitlab.com/postmarketOS/pmaports/-/issues/976
2021-04-03 10:58:24 -07:00
Oliver Smith
a909e543f3
nokia-n900: add PMOS_FORCE_PARTITION_RESIZE (MR 2076)
Resize the partition when using a pre-built image. We didn't notice that
this was missing, because N900 images are new and we only tested from
pmbootstrap install --sdcard, which already uses the full SD card size.
2021-03-30 23:03:49 +02:00
Clayton Craft
3d09f9c10d
device-purism-librem5: add nonfree subpackage w/ wifi/bt firmware (MR 2059)
Workaround for https://source.puri.sm/Librem5/linux-next/-/issues/290

This requires a kernel with the flash mode *disabled* in the Redpine
RS911x driver.

[ci:skip-build] already passed CI
2021-03-27 18:37:12 +01:00
Clayton Craft
ddf56b5169
linux-purism-librem5: disable RS9116 fw flashing (MR 2059)
This allows loading nonfree fw from rootfs (/lib/firmware), to work
around: https://source.puri.sm/Librem5/linux-next/-/issues/290

This change will break wifi unless the nonfree
firmware-siliconlabs-rs9116 package is installed.
2021-03-27 18:37:11 +01:00
Clayton Craft
b8c77b240e
device/community/firmware-siliconlabs-rs9116: new aport (MR 2059)
This packages the nonfree Silicon Labs RS9116 firmware, required by the
RS9116 chip when flash mode is *not* enabled in the kernel driver.
2021-03-27 18:37:10 +01:00
Clayton Craft
aaca2d5d38
linux-purism-librem5: upgrade to 5.11.6 (MR 2059)
Upstream changelog:
61e6fc1d50
2021-03-27 18:37:02 +01:00
Minecrell
47ec08d635
community/soc-qcom-msm8916: update UCM files (MR 2039)
- Fix speaker on xiaomi-mido
- Add UCM configuration for alcatel-idol347
2021-03-22 21:22:08 +01:00
Minecrell
b208647c58
bq-paella: include smb1360 (battery/charger driver) in initfs (MR 2039)
This is needed for USB to initialize correctly.
2021-03-22 21:22:08 +01:00
Minecrell
86eff19e0b
community/asus-me176c: fix splash screen width and phosh scaling (MR 2047)
Actually the display in asus-me176c has a width of 800px, which means
that the splash screen isn't perfectly centered. Correct this in
deviceinfo to make it show up correctly.

Also, add configuration file for Phosh to reduce scaling a bit to 1.75.
It's kind of subjective but scaling = 2 definitely feels too large.

[ci:skip-build]: already built successfully in CI
2021-03-21 21:17:59 +01:00
Minecrell
2094a44b23
community/linux-asus-me176c: upgrade to 5.4.107 (MR 2047) 2021-03-21 21:17:57 +01:00
Clayton Craft
56a0531ad2
linux-purism-librem5: build led-pattern driver into kernel (MR 2043)
There's a race condition between when the pwmled device is initialized,
which kicks off a feedbackd udev rule that configures the led trigger to
'pattern', and when ledtrig_pattern actually loads. It seems to mostly
load after the rule runs, so the trigger is never set to 'pattern' on
boot.

This removes the race by building the ledtrig_pattern driver into the
kernel.

[ci:skip-build] Already build successfully in CI
2021-03-21 10:54:29 -07:00
Clayton Craft
a44713cf0d
linux-purism-librem5: add patch to fix wifi performance regression (MR 2043)
This patch fixes a fairly severe performance regression with wifi on the
L5 (something like 20x improvement in performance with this patch)

[ci:skip-build] Already build successfully in CI
2021-03-21 10:54:29 -07:00
Clayton Craft
9ae9a7eb2c
device-purism-librem5: do not start nonexistent service (MR 2034)
Fixes https://gitlab.com/postmarketOS/pmaports/-/issues/1010
2021-03-17 13:36:40 -07:00
Clayton Craft
0dc254adef
device-purism-librem5: use bq25890 ship mode support in kernel (MR 2032)
Ship mode via the mechanism used by purism doesn't work; it's either not
possible or outside my understanding to run an openrc runscript with a
busybox init on *poweroff* and *not reboot*, which is what is required
for this to work properly..

This module param requires a corresponding kernel patch to enable ship
mode support in the bq25890-charger module
2021-03-16 07:38:22 +01:00
Clayton Craft
ee89b6cb24
linux-purism-librem5: add bq25890 patch for ship mode on poweroff (MR 2032)
Submitted to purism here:
https://source.puri.sm/Librem5/linux-next/-/merge_requests/333
2021-03-16 07:38:17 +01:00
Clayton Craft
fe3620e93d
linux-purism-librem5: upgrade to 5.11.4 (MR 2018)
Upstream change logs:

5.11.2:
fdc91c4e20

5.11.4:
a178aa515c

This also adds a -dev subpackage, and cleans up makedepends

[ci:skip-build]: already built successfully in CI
2021-03-14 23:28:31 -07:00
Clayton Craft
07193614cb
device-purism-librem5: use new u-boot location (MR 2023) 2021-03-13 02:18:13 +01:00
Clayton Craft
6ed0879afe
device-purism-librem5: upgrade to 1.15 (MR 2009)
This includes a new librem5-base config release, the most notable change
being some mic echo cancellation changes in pulseaudio config.

Upstream changelog:
351958ffc0

Note: I did not include the upstream change to disable wifi PM. I don't
find the performance to be so bad that it's worth giving up some battery
efficiency for.

Note: the librem5-base thing from purism has a new naming/versioning
format, which is in line with some of their other projects, so the
APKBUILD has been updated to support that too
2021-03-07 20:15:28 +01:00
Clayton Craft
3ed8a1b07c
device-purism-librem5: add smartcard reader support (MR 1993)
This adds a new subpackage that installs dependencies and configures the
smartcard reader on the librem 5. Some setup is required before this
will work (e.g. upgrading reader firmware), the L5 wiki page will have
this information.

The pcsc init script was forked into this package to allow for powering
on the reader *before* the service started. Doing this in a separate
init script would have caused the reader to power on regardless of
whether the pcsc service was set to start, which is not desirable since
it should *only* be powered on when pcsc is starting
2021-02-28 10:50:36 +03:00
Clayton Craft
f65516e2cf
community/linux-purism-librem5: upgrade to 5.11.1pureos1 (MR 1987)
Changelog:
42b617ee93

[ci:skip-build]: doesn't finish within 3 hours (can somebody fix this?)
2021-02-27 23:30:05 +01:00
Clayton Craft
5943517ffe
device-purism-librem5: upgrade to 1.13 (MR 1960)
Main change is librem5-base v35, upstream changelog:
89c9c55def

Removed a dtb in the deviceinfo that is no longer generated on newer
kernels
2021-02-21 13:54:22 +01:00
Clayton Craft
9ebdbd023c
linux-purism-librem5: upgrade to 5.11.0pureos1 (MR 1960)
Purism has changed the kernel name they used, so that's reflected in the
apkbuild.

This kernel includes patches for renaming the audio device, and requires
a corresponding upgrade to the device package to bring in the new ucm2
config changes for that.
2021-02-21 13:54:18 +01:00
Minecrell
55503f0e52
samsung-a3lte: move from testing to community (MR 1963)
There is already samsung-a3ulte in community, and the devices actually
share the same kernel, device tree, and basically everything except
firmware. We just need separate firmware packages because Samsung uses
different secure boot certificates on a3lte and a3ulte.

They also share the same wiki page which suggests installation using
the pre-built images now, so having pre-built images only for
samsung-a3ulte is quite confusing for users.

The situation is similar as for samsung-a5ulte and samsung-a5lte
which also are both in community already.
2021-02-17 12:05:08 +01:00
Bart Ribbers
99b8c5b1e5
pine64-pinetab: enable Kirigami lowpower mode (MR 1928) 2021-02-11 09:50:05 +01:00
Alexey Min
00e0036ff2
pine64-pinetab: enable sd to emmc installation (MR 1927)
This enables to build ondev installer image
with an ability to install to internal eMMC
with `pmbootstrap install --ondev --sdcard=...`.
2021-02-04 23:48:30 +03:00
Clayton Craft
361114359f
device-purism-librem5: change default dtb when board_rev is not set (MR 1920)
According to Purism, the imx8mq-librem5.dtb alias is going away soon,
and we should be using the -r2 dtb. The -r2 dtb (which represents
Birch/Chestnut L5 variants) is most compatible, it'll boot on later
variants. dtbs for later L5 devices won't work on older devices.
2021-02-03 15:40:46 -08:00
Bhushan Shah
3a82b531f5
device-purism-librem5*: drop workaround for mesa (MR 1906)
This is now no longer needed in both Plasma Mobile or Phosh. Compositor
seems to handle it correctly.
2021-01-29 09:35:38 +01:00
Clayton Craft
22a5e4dda5
device-purism-librem5: upgrade to 1.11 (MR 1896)
- Upgrade librem5-base to v33
- Include the haptic vibration driver in initfs for supporting osk-sdl's
  haptic feedback feature
- remove gps udev rule in pmaports in favor of using rule from
  librem5-base
- install modem audio udev rule from librem5-base
- add openrc service for putting device into 'ship mode' on shutdown
  (prevents battery from slowly draining)
- include Evergreen/r4 dtb in /boot
- Fix audio with port of ucm config to ucm2 (patch submitted upstream
  here: https://source.puri.sm/Librem5/librem5-base/-/merge_requests/214)
2021-01-27 15:36:21 +01:00
Nikita Travkin
b9af242f4f
wileyfox-crackling: updates for 5.11 kernel (MR 1871)
Change modules included in initfs, remove "no charging" note for
mainline kernel.
2021-01-27 10:09:01 +01:00
jonathan
332b6b5d6e
bq-paella: add truly display panel to initfs, update dtb paths (MR 1871) 2021-01-27 10:09:00 +01:00
Minecrell
7bef094fae
{bq-paella,wileyfox-crackling,xiaomi-wt88047}: remove modprobe.conf (MR 1871)
The modprobe.conf is not necessary on those devices because they already
load the panel module using deviceinfo_modules_initfs. Let's skip the
modprobe.conf in that case so we don't need to add all panels in two places.
2021-01-27 10:09:00 +01:00
Clayton Craft
afe338cee4
linux-purism-librem5: upgrade to 5.9.16+librem5.2 (MR 1904)
Upstream changelog:
ef903bb16a
2021-01-27 09:26:18 +01:00
Clayton Craft
6db0e21df7
device-purism-librem5: add udev rule for toggling wifi PM on charger change (MR 1863) 2021-01-11 23:34:23 -08:00
clayton craft
6410ab3fe5
linux-purism-librem5: upgrade to 5.9.15 (MR 1836)
Upstream changelog:
868f3eb852

Suspend is also disabled in the kconfig, since it is not
supported/working on this device

[ci:skip-build]: already built successfully in CI
2020-12-28 15:34:10 +01:00
Luca Weiss
de9b5d3c21
pine64-pinetab: move to community (MR 1753)
[ci:skip-build]: already built successfully in CI
2020-12-06 18:06:31 -08:00
clayton craft
e067004579
linux-purism-librem5: upgrade to 5.9.12+purism5.1 (MR 1791)
[ci:skip-build]: already built successfully
2020-12-06 18:01:13 -08:00
Bart Ribbers
c981d35ce6
pine64-pinephone: move from community to main (MR 1752)
First actual phone in main 🎉
Fits the requirements for main devices as listed on
https://wiki.postmarketos.org/wiki/Device_categorization.
2020-12-02 02:30:13 +01:00
clayton craft
15a07ac74c
device-pine64-pinephone: add craftyguy as co-maintainer (MR 1765)
I have been working a lot with this device lately, and own one, so it
seems appropriate right‽

[ci:skip-build]: already built successfully in CI
2020-11-27 22:20:03 -08:00
clayton craft
4915578771
device-pine64-pinephone: fix audio after pulseaudio upgrade (MR 1765)
After pulseaudio 14.0 was released, audio on the pinephone was broken.
This applies the relevant config from here to fix it:
c23f92aa46

[ci:skip-build]: already built successfully in CI
2020-11-27 22:19:52 -08:00
Minecrell
b3248bfd32
device/community/soc-qcom-msm8916: fix regressions after PA update (MR 1760)
New upstream ALSA/PulseAudio release, new UCM regressions - of course!
Introduce some new hacks to make the ALSA UCM configurations work again.

This fixes weird "Combination of Speaker,Primary Microphone" outputs
appearing in the PulseAudio mixer.

And while we're at it, some minor improvements/additions:

  - Default to Speaker/PrimaryMic instead of Headphones/Headset
    I believe this is just a workaround until headphones detection
    works properly.

  - Add UCM configurations for oppo-a51f and lenovo-a6010
2020-11-26 11:45:14 +01:00
Luca Weiss
959bbaaffe
treewide: remove unused files (MR 1731)
These files aren't references by any APKBUILD, delete them.
2020-11-18 11:24:01 +01:00
Dylan Van Assche
9d0c1b48d8
Set voice call playback rate to 8000 Hz, closes #864 (MR 1711) 2020-11-14 00:46:37 -08:00
Bart Ribbers
bb41f53879
pine64-pinephone: clean setup-modem.sh script (MR 1701)
Since we now use the in-kernel modem driver of Megi's 5.9 kernel, the
majority of the setup script has become unnecessary. Remove all the now
unnecessary commands and keep it just for enabling VoLTE auto profile
selecting

https://megous.com/git/linux/tree/drivers/misc/modem-power.c?h=orange-pi-5.10#n531
https://megous.com/git/linux/tree/drivers/misc/modem-power.c?h=orange-pi-5.10#n580
https://megous.com/git/linux/tree/drivers/misc/modem-power.c?h=orange-pi-5.10#n610
2020-11-13 01:08:58 -08:00
clayton craft
5a7962685e
purism-librem5: set deviceinfo_mesa_driver (MR 1625) 2020-11-12 23:42:39 -08:00
Luca Weiss
870db09b50
pine64-pinephone: set deviceinfo_mesa_driver to get fast osk-sdl (MR 1625) 2020-11-12 23:41:29 -08:00
clayton craft
fb42b3b601 device-purism-librem5: upgrade to 1.8 (MR 1689)
- Upgrade librem5-base config
        - add goodix touch input and edx touchscreen drivers to
          deviceinfo/initramfs
2020-11-10 02:58:12 +00:00
clayton craft
b721b442e6 linux-purism-librem5: upgrade to 5.9.5 (MR 1689) 2020-11-10 02:58:12 +00:00
Clayton Craft
38607b7f12
device-purism-librem5: select dtb based on device rev (MR 1673)
[ci:skip-build]: already built successfully in CI
2020-11-02 09:07:26 +01:00
Clayton Craft
48d1727d15
linux-purism-librem5: upgrade to 5.9.1 (MR 1673)
This also includes a patch from Purism that is the best workaround so
far for the hang that plagues Dogwood phones.
2020-11-01 19:15:42 -08:00
Minecrell
421095284a
device/community/soc-qcom-msm8916: fork alsa-ucm-conf entirely (MR 1655)
Upstream keeps making breaking changes in patch releases.
Let's fork alsa-ucm-conf entirely for now instead of just patching
in some files to ensure that these files don't break every few months.

This fixes audio on MSM8916 devices when not using the modem.
2020-10-30 17:10:18 +01:00
clayton craft
737f33e561
pine64-pinephone: add workaround for purging the -elogind subpackage (MR 1660)
This subpackage was removed when a proper fix for suspend was merged,
however apk doesn't know to purge this subpackage, so the old elogind
hook workaround stuck around. This workaround could probably be removed
once we're sure all folks on edge have installed this upgraded package
with the 'provides'...
2020-10-28 22:34:56 -07:00
Martijn Braam
07a7853b50
device-pine64-pinephone: add autofocus firmware (MR 1656)
[ci:skip-build]: already built successfully in CI
2020-10-28 11:57:32 -07:00
Pedro Moreno
e4366d5f8a
Pinephone: Fix excessive mic noise on call (MR 1652)
Fix ucm2 settings to lower mic boost and increase mic volume.

Fixes: #720
2020-10-28 11:45:02 -07:00
Bhushan Shah
378904d076
device-pine64-pinephone: remove the elogind hook (MR 1651)
musb_hrdc bug is fixed properly with kernel patch, so we do not need to
do this bind/unbind dance anymore.

This partially reverts commit f7d743a213.
2020-10-27 13:58:34 +05:30
clayton craft
f7d743a213
device-pine64-pinephone: fix suspend with elogind (MR 1636)
- re-enable console suspend, which seems to be broken with elogind when
  suspending (kernel gets hung up indefinitely in vt_waitactive)

- add a suspend hook to work around the musb driver not allowing the
  device to suspend

Based on my testing, this option seems to prevent suspending via
elogind (using `loginctl suspend`). When console suspend is disabled,
the kernel gets hung up in the call to vt_waitactive, and elogind times
out trying to suspend.
2020-10-25 11:17:34 -07:00
Oliver Smith
517f905b84
pine64-pinephone: update devicepkg for 5.9 kernel (MR 1614)
* update modem init for modem_power
* adjust alsa configs
* remove obsolete megapixels config file

Related: https://xnux.eu/log/#020
Co-Authored-By: Martijn Braam <martijn@brixit.nl>
2020-10-20 18:02:24 +02:00
clayton craft
bdf120c6a7
device-purism-librem5: upgrade to 1.6 (MR 1628)
This new version:
        - Upgrades device config from upstream to v25
        - Fixes a problem using modesetting driver on Xorg (lightdm
          was broken because it now uses Xorg)
        - Override GDK to use GLES (change from upstream Purism)
2020-10-08 22:08:35 -07:00
clayton craft
d2cf30ae66
linux-purism-librem5: upgrade to 5.9.0-rc8 (MR 1628) 2020-10-08 22:08:35 -07:00
Martijn Braam
879bd336b7 device/pine64-pinephone: remove megapixels config (MR 1587)
(cherry picked from commit 2ac5e8f90a9f491520b880a98d16a7a4fe0a5c43)
2020-10-07 12:55:20 +02:00
Minecrell
e9925b4a72
device/community/soc-qcom-msm8916: update ALSA UCM configurations (MR 1603)
- Add UCM configuration for Xiaomi Redmi 2 (wt88047)
- Add UCM configuration for Xiaomi Redmi Note 4 (xiaomi-mido)
- Some fixes to UCM configuration for BQ Aquaris X5 (bq-paella)
2020-10-05 02:16:19 +03:00
Minecrell
2c491df415
bq-paella: enable splash screen (MR 1602)
Actually the display has been working in initramfs since MR 1261
(device-bq-paella: enable display and touchscreen on boot).
We should make it explicit in deviceinfo.
2020-09-28 14:49:14 +02:00
Bart Ribbers
f88001e233
firmware-pine64-rtl8723bt: upgrade to 0_git20200705 (MR 1588) 2020-09-18 22:32:07 +03:00
Oliver Smith
1acf66c8bf
pine64-pinephone: add megapixels config (MR 1537)
Copy of https://git.sr.ht/~martijnbraam/megapixels/tree/master/pinephone.ini
Let's do it like with other device specific configs, and put them into
the device package. It's a short file and it looks like it won't change
often.
2020-09-14 22:29:49 +02:00
Ralf Rachinger
583d433d85
device/device-pine64-pinephone: swaps L/R at Headset (MR 1556)
This Patch is needed, because in the kernel the audio from the cpu to the headset gets turned around. We need to turn this around again.
Please revert this if there is a fixed kernel.
2020-09-13 15:00:20 -07:00
Bart Ribbers
ff0929c925
asus-me176: modernize APKBUILD (MR 1538) 2020-09-08 10:09:07 +02:00
Luca Weiss
3720293639
pine64-pinephone: add anx7688 module to initramfs for usb keyboards (MR 1555)
The anx7688 module is needed for any USB devices to probe which we want
in the initramfs for unlocking osk-sdl using a USB-connected keyboard.
2020-09-07 21:19:59 +02:00
Linus Walleij
eb8a6b0cd0
device-nokia-n900: Add Finnish/Swedish keymap (MR 1519)
This adds a Finnish/Swedish key map for the Nokia n900.
The same keymap is used for Finnish and Swedish.

This makes the keyboard work in the console. To fix the
XkbLayout other changes are needed to pmbootstrap.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-09-07 18:24:07 +02:00
Danct12
da565bb838
community/firmware-analogix: add new firmware (MR 1421)
Signed-off-by: Danct12 <danct12@disroot.org>
2020-08-19 15:57:25 +02:00
Danct12
11c6587dca
device/*: switch to Alpine Mesa (MR 1496)
[ci:ignore-count]

Signed-off-by: Danct12 <danct12@disroot.org>
2020-08-18 14:53:31 +07:00
Clayton Craft
aaddd13d23
linux-purism-librem5: upgrade to 5.8.0+librem5.1 (MR 1489)
Upstream changelog:
457325eb59
2020-08-11 17:06:46 +02:00
Oliver Smith
dbf4d13907
treewide: avoid "More than one maintainer" error (MR 1480)
Alpine's abuild is soon going to complain if an APKBUILD has more than
one "Maintainer:" listed. Work around it by renaming the additional
maintainers to "Co-Maintainer:". While at it, move the devicepkg reference
link to the top in device-xiaomi-santoni for consistency.

In postmarketOS, we require at least two maintainers for devices in
main, therefore it does not make sense to drop additional maintainers
from the file.

In Alpine, this change was made because pkgs.alpinelinux.org apparently
can't handle more than one maintainer. I looked into it, and it would
require a database change to add it there, so it does not seem worth the
effort. I also thought about extending abuild to add an environment
variable to skip the check, but then the package would not build with
plain abuild without using the env var.

Related: dd4cd9d606
[ci:skip-build] [ci:skip-vercheck]
2020-08-08 22:07:20 +02:00
Bart Ribbers
15acd86d60 pine64-pinephone: enable VoLTE (MR 1434)
Also fix configuring device sleep wakeup when modem receives a call
2020-08-04 12:19:36 +02:00
Clayton Craft
5b603d94c7
linux-purism-librem5: upgrade to 5.7.12+librem5.1 (MR 1474)
Upstream changelog:
7a614767bd
2020-08-03 12:26:46 +02:00
Danct12
76cade06e1
device-pine64-pinephone: make the proximity sensor usable within iio-sensor-proxy (MR 1416)
Signed-off-by: Danct12 <danct12@disroot.org>
2020-07-31 18:03:12 +02:00
Federico Amedeo Izzo
4a0b0e7b18
samsung-serranovelte: fix Phosh scaling (MR 1407)
[ci:skip-build]: already built successfully in CI
2020-07-28 15:34:03 +02:00
Federico Amedeo Izzo
57b59eafb6
samsung-a3ulte: Fix Phosh scaling, make ui elements bigger (MR 1407) 2020-07-28 15:33:08 +02:00
Clayton Craft
25f3534d9b
linux-purism-librem5: upgrade to 5.7.9+librem5.1 (MR 1447)
Upstream changelog:
70f4e814de
2020-07-24 13:37:15 +02:00
Oliver Smith
802add79d4
pine64-pinephone: use PMOS_FORCE_PARTITION_RESIZE (MR 1428)
Automatically resize the root partition, if it is followed by
unallocated space.
2020-07-21 22:53:03 +02:00
Oliver Smith
c19d5dfc26
pine64-pinephone: fix setup-modem.initd (MR 1427)
The OpenRC service failed with the following error, as shown on serial:
	command_background option used but no pidfile specified
2020-07-20 20:17:59 +02:00
Martijn Braam
957dc9356a
pine64-pinephone: add multiple dtbs (MR 1163) 2020-07-16 23:16:17 +02:00
Bart Ribbers
dff419cf10
pine64-pinephone: setup modem to wake device (MR 1163) 2020-07-16 23:14:54 +02:00
Oliver Smith
7463d92293
device/*: clarify "close to mainline" (cosmetic) (MR 1408)
Make it clear, that these kernels are not mainline, but "close to
mainline".

[ci:skip-build] [ci:skip-vercheck]: just changing pkgdesc

Related: https://wiki.postmarketos.org/wiki/(Close_to)_Mainline
2020-07-11 16:06:16 +02:00
Martijn Braam
7743b4a25d
pine64-pinephone: use wys-pinephone (MR 1406) 2020-07-11 12:12:23 +02:00
Dolphin von Chips
f15f71c36f
device/community/firmware-pine64-rtl8723bt: add missing "replaces=" (MR 1400)
Package got renamed and "provides" wasn't added, so right now
`apk upgrade -a` with firmware-rtl8723bt installed results in
`ERROR: firmware-pine64-rtl8723bt-0_git20181104-r0: trying to overwrite lib/firmware/rtl_bt/rtl8723bs_config-pine64.bin owned by firmware-rtl8723bt-0_git20181104-r0.`
Add `replaces="firmware-rtl8723bt"` so `apk` prefers this package.

[ci:skip-build]: already built successfully in CI
2020-07-07 20:23:37 +02:00
Minecrell
4724b0f9c1
firmware/*: move community firmware packages to device/community (MR 1362)
Right now we have all firmware packages under firmware/*.
This is problematic for mainly two reasons:

  - It's not immediately clear which firmware packages we need to keep
    when forking a new stable branch. (Where we delete testing devices
    at the moment...) We might end up deleting firmware packages that
    are actually used by one of the devices in community.

  - When backporting devices to the stable we cannot just cherry-pick
    the commit that moved the device to community (since it does not
    contain the firmware package). Instead we need to cherry-pick
    earlier commits as well, which may touch a lot of deleted files
    in the testing directory.

Let's make this consistent by also placing the firmware packages in
the device/* directory. We already have the common firmware- prefix
to distinguish them from device/kernel packages, which are already
both under the device/* directory.
2020-07-07 15:48:57 +02:00
Minecrell
1eff900dcb
firmware/firmware-pine64-rtl8723bt: add -pine64-, cleanup, install license (MR 1362)
For most firmware packages we use a vendor- prefix to make it clear
who has provided the firmware. The firmware-rtl8723bt package is only
used for Pine64 devices and actually contains configs that are specific
to Pine64 hardware (e.g. rtl8723bs_config-pine64.bin).

Let's rename it to firmware-pine64-rtl8723bt to make this more clear.
Also cleanup the APKBUILD a bit and provide the LICENSE file in a -doc
subpackage so we can legally redistribute that firmware.
2020-07-07 15:48:52 +02:00
Clayton Craft
51cb42b3e6
linux-purism-librem5: upgrade to 5.7.7+librem5.1 (MR 1387) 2020-07-03 14:23:54 +02:00
Minecrell
8e080015d7
modem/msm-modem: rename msm-modem-mainline to msm-modem-rpmsg (MR 1356)
Newer Qualcomm SoCs (e.g. SDM845. MSM8953) seem to use a different
method to talk to the modem. There are no longer separate rpmsg/SMD
channels for QMI messags, instead the modem is also available through QRTR.

On these newer SoCs, installing msm-modem-mainline is pointless,
because the created /dev/modem device will not actually allow
communicating with the modem. However, you still need the part from
the base package (msm-modem), which installs+enables rmtfs.

To avoid confusion, rename the msm-modem-mainline subpackage to
msm-modem-rpmsg. Install only "msm-modem" on SDM845 because that
likely does not allow communication with the modem through RPMSG
anyway.
2020-06-25 09:41:35 +02:00
Clayton Craft
7cdd140b97
device-purism-librem5: upgrade to 1.5 (MR 1368)
This upgrades the librem5-base config used to v21:
        - better headphone support/detection
        - enable runtime PM for usb/SD interface

This also removes the modemmanager subpackage, the udev rule that was
installed by that package is now in modemmanager in Alpine.
2020-06-25 09:26:36 +02:00
Clayton Craft
6bccb218e6
linux-purism-librem5: upgrade to 5.7.5+librem5.2 (MR 1368)
This upgrade includes a runtime PM fix for the SD card reader/usb
2020-06-25 09:26:31 +02:00
Clayton Craft
79ad89afb2
linux-purism-librem5: upgrade to 5.7.5 (MR 1344) 2020-06-24 10:12:13 +02:00
Clayton Craft
973b239c3c
device-purism-librem5: upgrade package (MR 1344)
This upgrade includes:

    1) enabling fb in deviceinfo: This was previously disabled for
       debugging purposes, but can be re-enabled now so we get the
       awesome postmarketOS splash screen!
    2) fixing GPS, kinda: the device has changed, so this fixes the gpsd
       config to use the correct device, and includes a udev rule to
       make sure the device is owned by a group that gpsd can use
    3) usbnet working with configfs
    4) disables getty on /dev/ttyGS0, this was usb serial but isn't
       configured now that this uses configfs
    5) uses Mesa from Alpine, instead of mesa-git in pmaports. Upstream
       Mesa has support for the vivante gpu, and no longer need to rely
       on mesa master branch for support.
    6) fix pulseaudio detection of profiles
    7) update the librem5-base version used, includes a udev rule to
       configure DDR freq governor as 'powersave' (reduces power, and
       how much heat this thing puts out)

fixes #524
fixes #526
2020-06-24 10:12:13 +02:00
Clayton Craft
d44056eef7
linux-purism-librem5: move to 'community' (MR 1344) 2020-06-24 10:12:13 +02:00
Clayton Craft
2a5247cf73
device-purism-librem5: move to 'community' (MR 1344) 2020-06-24 10:12:13 +02:00
Mis012
62f97294a0
samsung-a3ulte: fix scaling on phosh (MR 1364) 2020-06-23 21:46:54 +03:00
Minecrell
5d1529f27b
arrow-db410c: move from testing to community (MR 1318) 2020-06-23 11:05:25 +02:00
jonathan
02aaf4620f
bq-paella: move from testing to community (MR 1319) 2020-06-23 10:37:51 +02:00
Antoine Fontaine
1d2b62a109
pine64-pinephone: unbreak audio (MR 1323)
Fixes #633.
2020-06-17 11:13:58 +02:00
Minecrell
af01e26142
device/community/soc-qcom-msm8916: install alsa-ucm-conf (MR 1307)
Newer versions of alsa-lib now require a top-level ALSA UCM
configuration (/usr/share/alsa/ucm2/ucm.conf):

    ALSA lib parser.c:2159:(load_toplevel_config) Unable to find the top-level configuration file '/usr/share/alsa/ucm2/ucm.conf'.
    ALSA lib main.c:983:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2
    alsaucm: error failed to open sound card hw:0: No such file or directory

The upstream ALSA UCM configurations are provided by Alpine's
"alsa-ucm-conf" package, so make sure to install it additionally.
2020-06-16 12:42:41 +02:00
Martijn Braam
057fa02f90
nokia-n900: move to community (MR 1177) 2020-06-11 14:41:26 +02:00
Minecrell
d7306531f5
soc-qcom-msm8916: add ALSA UCM configuration for bq-paella (MR 1295)
bq-paella has an external speaker amplifier connected to the right
channel of the headphones output. Add an extra UCM configuration
to handle this properly.
2020-06-09 23:18:38 +03:00
Minecrell
8013cad133
<msm8916-mainline>: add myself as co-maintainer (MR 1273)
I cannot test on most of them (at the moment), but I was involved
in porting all of them so I could "guess" certain changes at least.

[ci:skip-vercheck]: just moved and some maintainers
2020-06-03 13:46:00 +02:00
Nikita Travkin
ff5fb6fdcc
wileyfox-crackling: move from testing to community (MR 1273) 2020-06-03 13:46:00 +02:00
Mis012
ab271276e4
samsung-a3ulte: move from testing to community (MR 1273) 2020-06-03 13:46:00 +02:00
Ruby Iris Juric
08f312a0c1
motorola-harpia: move from testing to community (MR 1273) 2020-06-03 13:46:00 +02:00
Minecrell
1a82353f10
samsung-serranovelte: move from testing to community (MR 1273) 2020-06-03 13:46:00 +02:00
Minecrell
d021832955
samsung-a5(u)lte: move from testing to community (MR 1273)
a5lte and a5ulte are almost identical hardware-wise, the separate
package is mainly necessary because they use different firmware
signatures.

Alexey Min agreed to do some testing occasionally :)
2020-06-03 13:46:00 +02:00
Luca Weiss
a17a931026
device/*: Add deviceinfo_chassis variable (MR 1246)
[ci:ignore-count], [ci:skip-build]
2020-05-24 06:35:30 +02:00
Antoine Fontaine
6041d4eed0
Support Anbox explicitly in some kernels: (MR 1232)
* linux-postmarketos-allwinner
* linux-postmarketos-qcom-msm8916
* linux-asus-me176c

They support anbox already.

It will make CI catch errors such as the removal of anbox support in
https://gitlab.com/postmarketOS/pmaports/-/merge_requests/1205 when
https://gitlab.com/postmarketOS/pmbootstrap/-/merge_requests/1916 will
be merged.

[ci:skip-vercheck] and [ci:skip-build]: no need to rebuild the package.
2020-05-19 22:23:39 +03:00
Bart Ribbers
557a83d1ca
pine64-pinephone: move to community (MR 1175)
[ci:skip-build]: already built successfully in CI
2020-05-17 15:00:12 +02:00
Minecrell
a85db1dc7b
*: remove "Contributor:" lines from APKBUILDs (MR 1203)
At the moment we have Contributor: lines on some packages (but not all of them),
but often they don't represent the actual contributors to the package very well.
E.g. when we added them retroactively to the device packages we only added
the initial contributor (which isn't necessarily the person
who made most of the work for a device...)

The Git history is the most representative source for figuring out
who contributed to a package, so there is no reason to duplicate that
into the APKBUILD.

[skip ci]: way too many packages
2020-05-02 21:45:25 +03:00
Minecrell
c05987b8d7
asus-me176c: move to community (MR 1185) 2020-05-02 17:38:31 +02:00