postmarketos-mkinitfs!30 and specifically postmarketos-mkinitfs@6fdc8937,
changes expected hooks location from /etc/postmarketos-mkinitfs/hooks
to /etc/mkinitfs/hooks, and another commit pushed later adds
/usr/share/mkinitfs/hooks to expected directories. This more or less
breaks new pmOS installs done by running pmbootstrap install on edge branch,
which pull current (2023-06-17T16:57+02:00) device-* packages from
https://mirror.postmarketos.org/postmarketos/master.
Many of those packages which included initfs-hook.sh no longer work in that
case, because they had those hooks in old location, which isn't used
by latest postmarketos-mkinitfs.
Rebuilding the affected packages solves the issue.
[ci:ignore-count]
[ci:skip-build]: already built successfully in CI
Apparently the ath6kl FW can hang at times, so this enables automatic
recovery. This should make wifi on tablets that use ath6kl a little more
reliable.
Otherwise there is a 3 min delay until we can ssh into the device.
Same issue as on samsung-crownlte, where rom4nik investigated and
found the solution [1].
Note that the display does not work for dreamlte and dream2lte at the
moment, the device gets stuck on the pmos boot splash screen. This
issue is tracked in
https://gitlab.com/postmarketOS/pmaports/-/issues/2102.
[1] https://gitlab.com/postmarketOS/pmaports/-/merge_requests/4176
[ci:skip-build] already built successfully in CI
- ath6kl fw is used by some tablets (e.g. baytrail)
- Add support for i2c touchscreens in initramfs, which enables FDE
support for tablets that have i2c touchscreens.
- Drop phosh subpackage / phoc.ini. Forcing 1X scaling is wrong on some
tablets... Phoc/phosh is capable of detecting screen scaling, if it's
wrong on a tablet then a patch should be submitted upstream to fix it.
[ci:skip-build] already built successfully in CI
This kernel release incorporates the following fix from Megi:
- fixed regression in Pinephone power consumption during sleep (touchscreen
was not disabled properly, consuming a lot of power)
[ci:skip-build]: already built successfully in CI
Most UIs already implicitly depend on this in some way, and from the
user-facing point of view, it is sensible to have the full DB of timezones
available, in case the user wants to swap timezone or requires working
with them in different ways. Having it as a explicit dependency makes more
sense than relying on backward dependencies.
Background: https://gitlab.com/postmarketOS/pmaports/-/issues/2168#note_1426261355
[ci:skip-build]: already built successfully in CI
Some tablets have eMMC, which pmOS can be installed to. These modules
are needed to detect/mount the boot and rootfs partitions.
This also adds i915, which sets up the display and allows the splash
screen / console to work on boot.
- make CONFIG_DRM_DISPLAY_CONNECTOR built-in. This resolves 'slow' tty
initialization that breaks pbsplash on N900
- use CONFIG_CMDLINE_FROM_BOOTLOADER instead of CONFIG_CMDLINE_FORCE, to allow
kernel to boot with u-boot provided parameters such as
PMOS_FORCE_PARTITION_RESIZE
- upgrade to 6.3.5
[ci:skip-build]: already built successfully in CI
Add GNOME specific wallpapers with a good contrast, so lables for
launchers on top of the wallpaper can be read nicely.
Also set myself as maintainer since the original maintainer didn't
change the package since 2018.
This allows the user (upon loading the module) to handle non-native
binaries transparently - after registering the magic number and the
command for handling execution, the programs can be ran as if compiled
for the host architecture. (Similarly how the shebang line allows
the interpreter to be specified for scirpts).
Common use-cases include
* Using qemu user-space emulation to run
x86 binaries on ARM (or the other way around), or simply running
64-bit binaries on 32-bit architectures.
* Allow Java programs to be run transparently.
* Creating cross-architecture chroots (for cross-compilation e.g.)
Add a dummy subpackage that does not install any kernel. This is useful
for testing 'pmbootstrap install' code quickly without actually
downloading and installing a kernel package.
- fix wifi signal quality display, since /proc/net/wireless is no longer
available in omap kernel
Suggested-by: DvaMishkiLapa <thesame.personal@gmail.com>
- add `polkit-elogind` so tools like `loginctl poweroff` and `nmtui` do not
require sudo under i3wm
[ci:skip-build]: already built successfully in CI
For a lot of people having the 1 second timeout results in not finding
the sim at all. Let's rather wait up to 4 seconds for the sim to appear,
it was reported that 3 is enough in a report where 1 wasn't.
Related: issue 2072
[ci:skip-build]: already built successfully in CI
The call_audio_idle_suspend_workaround init service was moved to the
-pulseaudio subpackage, but the -modem subpackage still had a
.post-upgrade referring to it. This moves that to the (recently) new
-pulseaudio package
[ci:skip-build]: already built successfully in CI
Out of the box audio is really quiet and distorted on SDM845 devices when
using PipeWire. This can be worked around by forcing audio to 16 bits
(which PulseAudio uses by default and thus works). This seems to be a
kernel problem and should be fixed properly there but for now we can
apply this workaround to at least be able to switch to PipeWire anytime
soon. The actual workaround is applied by Wireplumber so the dependency
for the subpackage is set to that.
Upstream issue https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/3193
[ci:skip-build]: already built successfully in CI
