Commit graph

1450 commits

Author SHA1 Message Date
Joel Selvaraj
14ecfb8ead
device/testing/soc-qcom-sdm845: add ALSA UCM subpackage (MR 1962)
Based on https://gitlab.com/sdm845-mainline/alsa-ucm-conf
[ci:skip-build]: already built successfully in CI
2021-03-06 16:14:34 +01:00
Joel Selvaraj
140a3b528b
device/testing/linux-xiaomi-beryllium*: remove (MR 1962)
Downstream kernel is outdated and no longer maintained by us. Thus,
removed. The linux-xiaomi-beryllium-mainline kernel is removed because
its superseded by the common sdm845 kernel and is no longer needed.
2021-03-06 16:12:07 +01:00
Joel Selvaraj
0f7c330712
xiaomi-beryllium: switch kernel to qcom-sdm845 (MR 1962)
Remove downstream kernel and use the common linux-postmarketos-qcom-sdm845
kernel.
2021-03-06 16:09:24 +01:00
Joel Selvaraj
524287186d
firmware-xiaomi-beryllium: update to different source (MR 1962) 2021-03-06 16:09:19 +01:00
Mark Hargreaves
241f34f4fe
xiaomi-clover: new device (Xiaomi Mi Pad 4) (MR 2003)
[ci:skip-build] Already built on CI
2021-03-05 16:48:25 +03:00
InsanePrawn
2fdbd70d48
soc-qcom-sdm845: add udev rule to tag haptics motor for feedbackd (MR 2002)
Co-authored-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: InsanePrawn <insane.prawny@gmail.com>
2021-03-03 15:43:09 +03:00
Duje Mihanovic
2978b95c1f
lg-vee3e: new device (MR 1977)
[ci:skip-build]: already built successfully in CI
2021-03-02 23:34:31 +01:00
Edwin
079f4f59f9
xiaomi-dior: new device (Xiaomi Redmi Note 4G) (MR 1992)
Add support for xiaomi-dior. Fix framebuffer bugs, now fbcon
and X server works.

[ci:skip-build] Already built in CI
2021-03-02 14:56:47 +03:00
Clayton Craft
3ed8a1b07c
device-purism-librem5: add smartcard reader support (MR 1993)
This adds a new subpackage that installs dependencies and configures the
smartcard reader on the librem 5. Some setup is required before this
will work (e.g. upgrading reader firmware), the L5 wiki page will have
this information.

The pcsc init script was forked into this package to allow for powering
on the reader *before* the service started. Doing this in a separate
init script would have caused the reader to power on regardless of
whether the pcsc service was set to start, which is not desirable since
it should *only* be powered on when pcsc is starting
2021-02-28 10:50:36 +03:00
Iskren Chernev
d8ac6e9a35
oneplus-billie2: new device (OnePlus Nord N100) (MR 1989)
So far the debug-shell in initfs works. The device uses dynamic
partitions, so that has to be figured out to get a proper rootfs.

One thing to look out for is that mount_subpartitions task in initfs
hangs, so pmos_boot=sth was added to kernel cmdline to skip it. This is
also related to dynamic partitions, anyway.

[ci:skip-build] Already built on CI
2021-02-28 05:47:34 +03:00
Clayton Craft
f65516e2cf
community/linux-purism-librem5: upgrade to 5.11.1pureos1 (MR 1987)
Changelog:
42b617ee93

[ci:skip-build]: doesn't finish within 3 hours (can somebody fix this?)
2021-02-27 23:30:05 +01:00
Philip Scherer
187aceea77
lg-d855: switch arch to armv7 (MR 1991)
Contiributes to: #599

[ci:skip-build] Already built on CI
2021-02-26 17:08:38 +03:00
Felix Kehrer
0f561503bc
samsung-manta: update arch to armv7 (MR 1984)
[ci:skip-build]: already built successfully in CI
2021-02-25 00:53:52 +01:00
Luca Weiss
a807b01d8f
device/testing/firmware-*: move firmware to /lib/firmware/postmarketos
We keep device-specific firmware in this directory and not in
/lib/firmware.
2021-02-24 02:07:46 +01:00
Oliver Smith
eceef70578
treewide: update git.sr.ht checksums (MR 1978)
Update checksums after tar upgrade on sr.ht servers.
[ci:skip-vercheck] [ci:skip-build]
2021-02-24 00:13:02 +01:00
Oliver Smith
2d5ad32455
treewide: adjust to broadcom Wi-Fi firmware move (MR 1971)
Let all devices, which depend on linux-firmware-brcm depend on
linux-firmware-cypress too (like done in MR 1969 for lg-hammerhead).

Related: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/commit/?id=060ad8b3d505e2ff8878d11a81da3532b983cd45

[ci:skip-build] Already built on CI
2021-02-22 19:00:50 -08:00
Gianluca Boiano
8cb9d39b8b
linux-xiaomi-vince: upgrade to 4.9.257 (MR 1973)
[ci:skip-build] already built on CI
2021-02-22 17:04:58 +03:00
Clayton Craft
5023b9c433
device-pine64-pinephone: add gpio_vibra module to initfs (MR 1870)
This is needed to enable osk-sdl's haptic feedback when typing
2021-02-22 15:40:48 +03:00
Uclydde
e512666c65
motorola-ali: revert arch to armv7 (MR 1956)
[ci:skip-build]: already built successfully in CI
2021-02-21 21:48:23 +01:00
Clayton Craft
5943517ffe
device-purism-librem5: upgrade to 1.13 (MR 1960)
Main change is librem5-base v35, upstream changelog:
89c9c55def

Removed a dtb in the deviceinfo that is no longer generated on newer
kernels
2021-02-21 13:54:22 +01:00
Clayton Craft
9ebdbd023c
linux-purism-librem5: upgrade to 5.11.0pureos1 (MR 1960)
Purism has changed the kernel name they used, so that's reflected in the
apkbuild.

This kernel includes patches for renaming the audio device, and requires
a corresponding upgrade to the device package to bring in the new ucm2
config changes for that.
2021-02-21 13:54:18 +01:00
Pavel Frolov
625a71bf25
lg-hammerhead: add linux-firmware-cypress package dependency (MR 1969)
Cypress bought the brcm WiFi stuff from broadcom so they want their firmware to
be called cyfmac instead of brcmfmac
a lot of brcmfmac firmware is now symlinked to cyfmac
2021-02-21 13:43:00 +01:00
Caleb Connolly
d3bde7f838
device/testing/linux-stable-sdm845: remove unused package (MR 1967)
This package is no longer used, as the OnePlus 6 will now use the
linux-postmarketos-qcom-sdm845 package.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
2021-02-20 00:39:20 +03:00
Caleb Connolly
de7a6777b4
device/testing/device-oneplus-fajita: use shared sdm845 kernel (MR 1967)
Switch to the linux-postmarketos-qcom-sdm845 common kernel.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
2021-02-20 00:39:20 +03:00
Caleb Connolly
cc4f72f35a
device/testing/device-oneplus-enchilada: use shared sdm845 kernel (MR 1967)
Switch to the linux-postmarketos-qcom-sdm845 common kernel.

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
2021-02-20 00:39:18 +03:00
Minecrell
55503f0e52
samsung-a3lte: move from testing to community (MR 1963)
There is already samsung-a3ulte in community, and the devices actually
share the same kernel, device tree, and basically everything except
firmware. We just need separate firmware packages because Samsung uses
different secure boot certificates on a3lte and a3ulte.

They also share the same wiki page which suggests installation using
the pre-built images now, so having pre-built images only for
samsung-a3ulte is quite confusing for users.

The situation is similar as for samsung-a5ulte and samsung-a5lte
which also are both in community already.
2021-02-17 12:05:08 +01:00
Timon Baetz
f4d9d832e2
samsung-i9100: set deviceinfo_mesa_driver to get fast osk-sdl (MR 1957) 2021-02-16 18:25:09 -08:00
Svyatoslav
16e5be302a
asus-tf201: new device (ASUS Transformer Prime) (MR 1883)
[ci:skip-build]: already built successfully in CI
2021-02-16 00:14:56 +01:00
Ion Agorria
21f535583a
main/linux-postmarketos-grate: upgrade to 5.11_rc5 (MR 1883)
This updates the current commit and refactor APKBUILD to
more modern way of writing downstream kernels. Also move to main/ to fit
other linux-postmarketos-* kernels.
2021-02-16 00:14:53 +01:00
Minecrell
38fea40bcc
bq-paella-downstream: remove QEMU / fixup nonfree-firmware pkgdesc (MR 1912)
Not sure why "qemu" is listed in the depends of bq-paella-downstream,
that does not really make sense. Also fixup the pkgdesc of the
nonfree-firmware subpackage, the modem works somewhat now.

[ci:skip-build]: already built successfully in CI
2021-02-15 23:28:29 +01:00
Minecrell
425340a353
bq-picmt: Rename to "bq-paella-downstream" (MR 1912)
The "bq-picmt" device port is actually for the same device as the
"bq-paella" device package in community, just with the downstream
kernel. This is useful occasionally for testing.

However, the name applies that this device package should be used
on the BQ variant of the BQ Aquaris X5 (picmt) and the mainline
package should be used on the Cyanogen variant (paella). Actually
both packages work on both variants since the hardware is the same.

To make that clear, rename "bq-picmt" to "bq-paella-downstream".
2021-02-15 23:24:06 +01:00
Minecrell
0ff83cbedc
bq-picmt: move to unmaintained (MR 1912)
Right now the "bq-picmt" device port is quite confusing.
It's actually for the same device as "bq-paella", which is in community
and uses the mainline kernel, except that it uses the downstream kernel.

Having the downstream kernel packaged is useful for testing sometimes,
but otherwise the device package is completely unsupported.
The mainline port works much better. The downstream port should only
be used if you know what you are doing (e.g. because you want to test
if something is working on downstream but not mainline) and therefore
it should not show up in "pmbootstrap init" by default.

Move the device package to unmaintained to implement that.
Also, add an "# Unmaintained: ..." comment that will be displayed
in "pmbootstrap init" if the device is selected anyway.
2021-02-15 23:24:06 +01:00
Newbyte
7d697fef05
device-raspberry-pi{,0,3,4}: don't move dtbs (MR 1944)
See https://git.alpinelinux.org/aports/commit/main/linux-rpi/APKBUILD?id=fb542395e33ab9eaab13d5cf40029173240c7836

Closes https://gitlab.com/postmarketOS/pmaports/-/issues/965
2021-02-15 23:31:31 +03:00
arpio
c5692dfc71
samsung-a20: new device (Galaxy A20) (MR 1880) 2021-02-15 20:08:11 +01:00
Bart Ribbers
99b8c5b1e5
pine64-pinetab: enable Kirigami lowpower mode (MR 1928) 2021-02-11 09:50:05 +01:00
Bart Ribbers
e2cbd9e4ed
pine64-pinephone: enable Kirigami lowpower mode (MR 1928)
Should increase performance a bit of Kirigami applications by disabling
some fancy stuff like shadows
2021-02-11 09:50:05 +01:00
Martijn Braam
6fe006aa52
device-pine64-pinephone: Enable jack detection (MR 1943)
Enable headset jack detection and automatic switching in the UCM
2021-02-11 09:15:10 +01:00
linuxgorl
49a45c5567
motorola-surnia: add firmware for wi-fi/bluetooth, video and modem (MR 1947) 2021-02-11 09:13:08 +01:00
BO41
37893a4bda
huawei-kiwi: add touchscreen driver, enable sensors, enable GPU firmware (rename panel driver) (MR 1946)
[ci:skip-build] Already built in CI
2021-02-10 23:05:19 -08:00
Luca Weiss
c57aa7b299
device/*/linux-*: enable CONFIG_TMPFS_POSIX_ACL (MR 1939)
This is required by some software, e.g. bluez/gnome to set some ACLs on
/dev/rfkill (see #904). While probably nobody will notice on the
downstream kernels (as we don't have any proper software there anyways)
it's definitely needed on mainline-ish kernels. Surprisingly only one
kernel has broken by enabling this option (linux-sony-tulip) which I've
patched up.

linux-postmarketos-qcom-sdm660 did not break by enabling this option,
but required linux4.17-gcc10-extern_YYLOC_global_declaration.patch to
build again, so this was fixed too.

[ci:skip-build] [ci:ignore-count]
2021-02-09 21:54:35 +01:00
Newbyte
1c2b90df6f
raspberry-pi{,0,3,4}: rc-service add -> rc-update add (MR 1936)
rc-service add does not work, so change it to rc-update add
2021-02-07 23:42:25 +01:00
Michal
89126941c5
linux-xiaomi-begonia: update kconfig and upgrade to 4.14.218 (MR 1925) 2021-02-07 10:17:02 +01:00
Alexey Min
00e0036ff2
pine64-pinetab: enable sd to emmc installation (MR 1927)
This enables to build ondev installer image
with an ability to install to internal eMMC
with `pmbootstrap install --ondev --sdcard=...`.
2021-02-04 23:48:30 +03:00
Clayton Craft
361114359f
device-purism-librem5: change default dtb when board_rev is not set (MR 1920)
According to Purism, the imx8mq-librem5.dtb alias is going away soon,
and we should be using the -r2 dtb. The -r2 dtb (which represents
Birch/Chestnut L5 variants) is most compatible, it'll boot on later
variants. dtbs for later L5 devices won't work on older devices.
2021-02-03 15:40:46 -08:00
jenneron
f35f577011
device-tablet-x86uefi: new device (MR 1913)
This is a generic package for devices which use x86_64 CPU and 32-bit
EFI. Most distributions don't provide installation for 32-bit EFI, so
installation is not user-friendly.

Actually, these tablets deserve device-specific packages (I am going to
make ones for ASUS VivoTab Note 8 and ASUS Transformer Book T100TA), but
this one includes basic functions and can be booted on any 32-bit EFI
tablet with disabled secure boot and missing device-specific package.
I guess 32-bit EFI with 64-bit CPU is Intel's "feature" and AMD doesn't
have such stuff, so this package will be installed only on devices with
Intel CPU, unlike device-tablet-x64uefi which can be installed on any
x86_64 PC. So i decided to enable some Intel specific things (userspace
GPU stuff and alsa-ucm-conf).

I used for reference device-tablet-x64uefi and
device-trekstor-surftabduow1 packages. This package also can be used as
a reference for device-specific ones.
2021-02-02 22:56:58 -08:00
Michal
2748241a2f
xiaomi-begonia: new device (Redmi Note 8 Pro) (MR 1909) 2021-01-31 14:29:09 +01:00
antony-jr
7ae5c5fb03
asus-z00l: new device (Asus Zenfone 2 Laser 720p) (MR 1633)
Runs mainline linux kernel. All features except GPS, Camera, USB OTG and
Notification LED is working fine.
2021-01-30 18:05:51 +01:00
8osm
437d1d8ebb
lenovo-p1m: new device (Lenovo Vibe P1m) (MR 1905) 2021-01-29 09:44:08 +01:00
BogdanTheGeek
a7efb145a9
motorola-condor: new device (MR 1887)
Added support for Motorola Moto E 2014 codename: condor
It is booting, has usb, battery, flashing needs special fastboot command for the boot partition
2021-01-29 09:41:03 +01:00
Bhushan Shah
3a82b531f5
device-purism-librem5*: drop workaround for mesa (MR 1906)
This is now no longer needed in both Plasma Mobile or Phosh. Compositor
seems to handle it correctly.
2021-01-29 09:35:38 +01:00