postmarketos-ui-i3wm|mate.post-deinstall:
Contains removal of file "61-autologin.conf"|"65-autologin.conf".
However, this file is removed by apk automatically unpon
deinstallation.
postmarketos-ui-i3wm|mate|xfce4.pre-deinstall:
Contains disabling service "lightdm". Removing display manager service
upon deinstallation isn't done by other UIs either. It can lead to
unexpected behaviour when installing another UI using lightdm and then
uninstall MATE UI.
Additionally
postmarketos-ui-i3wm.post-upgrade:
Removed postmarketos-ui-i3wm.post-upgrade and replaced it with a link to
postmarketos-ui-i3wm.post-install, like it's done in MATE and Xfce4.
- Enable Broadcom and Marvel wifi drivers (cards exist that can be
installed in the L5)
- Add workaround that helps with modem disappearing when modem PM is
enabled. Doesn't solve it completely, but it makes the problem much
less frequent.
This u-boot version doesn't support the devkit yet. Last I heard, Purism
plans to add the config back in after porting it from the old u-boot.
If anyone needs this (probably no one besides me?), the old u-boot can
be built locally from an earlier version of this package.
Updates the u-boot on the Librem 5 to a branch that is much closer to
mainline u-boot.
- adds support for booting from SD card to the u-boot boot script
- m4 is no longer necessary, at least not right now (may be re-added by
purism in the future for supporting some low power modes)
- adds a patch to enable u-boot console on uart 4 (on the m.2 connector)
for the debug board
- drops the patch to enable efidebug command, this isn't necessary
anymore with mainline u-boot
Co-authored-by: Bart Ribbers <bribbers@disroot.org>
mesa-dri-swrast no longer exists and just installs,
mesa-dri-gallium. However, this might not always be the case, so
let's change it before it causes any issues.
[ci:ignore-count]
[ci:skip-build]
I'd say this is not appropriate to be in postmarketOS because
this is just a bog standard x86 computer, it has UEFI BIOS and
everything, and you can just boot a Linux distro on a USB
stick.
It also has a 64-bit UEFI unlike some other tablet, so there
should be no issue installing a Linux distro with a fairly
modern kernel these days.
So, let's just drop it and forget this port even existed.
The charging script does nothing other than annoy a few people,
so get rid of it.
While at it, let's remove hybris reference from the APKBUILD as
hybrisOS is dead.
Closes#1487
Signed-off-by: Dang Huynh <danct12@disroot.org>
Powerful beast with Snapdragon 855 - 8 cores up to 2.8 GHz,
6 Gb RAM and fast UFS storage.
Mainline port is bare minimum (UART, framebuffer display, physical
keys, USB network). No storage support yet (UFS refuses to work)
https://wiki.postmarketos.org/wiki/Xiaomi_Mi_9_(xiaomi-cepheus)
Downstream kernel will not be maintained really, but useful for
exploring stuff. This kernel is at version 4.14 and can be
compiled with recent gcc versions though, so not that bad.
USB rndis works, touchscreen too, but no display (framebuffer,
/dev/fb0 is not present at all). Internal storage works, also
battery/charging.
I usually end up installing it on new installs. Why not enable it by
default and have a more polished experience for users? Most users will
use a gtk app and/or use the gtk file chooser
Device uses mainline kernel. What works:
- boots
- pstore log
- simple framebuffer
- storage including sdcard
* payload mock device tree:
Payload mock device tree is needed to mock device tree,
when we're overriding linux with u-boot in android boot image.
Stock bootloader needs this dtb appended to gzipped u-boot.
Bootscript is a simple hush shell script, dedicated to boot OS.
It may be customized to implement dual boot or to change kernel
command line.
mesa-egl is usually installed by dependencies of ui packages, but when
choosing the "none" ui option in pmbootstrap, it isn't selected, leading
to libEGL.so.1 not being found.
Add it as an explicit dependency.
[ci:skip-build]: already built successfully in CI
To make panel driver upstreamable to mainline linux, we need to use
proper panel selection in secondary bootloader (still TODO), and
therefore lk2nd will be strictly required to boot mainline port.
Switch flashing method to fastboot, enable sparse rootfs generation,
and depend on lk2nd package.
Depends on: postmarketOS/pmbootstrap!2174, to provide full
integration of lk2nd in pmbootstrap.
So, full flashing procedure for samsung-klte will look like:
$ pmbootstrap init
$ pmbootstrap install
$ pmbootstrap flasher --method=heimdall-bootimg flash_lk2nd
$ pmbootstrap flasher flash_kernel --no-install
$ pmbootstrap flasher flash_rootfs
$ fastboot reboot
This removes u-boot from our image and allows booting via an
UEFI-compatible platform firmware instead. So to flash pmOS on the PPP
now we will require the user to flash Tow-Boot to the SPI. See the edge
post for more information.
Related: https://postmarketos.org/edge/2022/03/28/ppp-tow-boot/
Co-Authored-By: Oliver Smith <ollieparanoid@postmarketos.org>
Add option for mainline kernel iso downstream kernel. Note that a lot is
not working yet due to incomplete devicetree, so this is for development
purposes only.
Add and rearrange dependencies with new apps, and fix angelfish package
name.
Adds the following packages to extras:
- alligator (rss reader)
- kasts (podcasts)
- tokodon (mastodon client)
Move neochat from a required to an extra dependency, since it's a
matrix client (which many people may not need).
Add plasma-mobile-sounds to main dependency, so that kclock (and dialer
in the future) have sounds to choose from.
Rename plasma-angelfish to angelfish dependency since plasma-angelfish
was renamed in alpine at some point.
Remove the part of the description of the package that says numeric
passwords are required (no longer the case).
When moving the code to it's own repo I changed the license to GPL-2.0,
I forgot to update the APKBUILD.
[ci:skip-build] already built successfully in CI
It seems like at least samsung-a5 needs the same "facility lock"
workaround as samsung-serranove, otherwise ModemManager can not detect
the SIM card correctly. Move it to a subpackage of soc-qcom-msm8916
and apply it to samsung-a3 as well just to be sure.
So far this issue seems limited to Samsung devices, at least bq-paella
is not affected (tested with the same SIM card), so it does not seem
right to apply it unconditionally to all devices.
[ci:skip-build] Already built successfuly on CI in MR
