Currently, every LCDs inside their (our users) pocket are driving 3.3V,
meanwhile the LCD interface is meant to drive at ~2V.
This turns our LCDs into a timebomb that is ready to trigger at any moment,
killing the display.
Signed-off-by: Danct12 <danct12@disroot.org>
Current default is performance, and that is for sure not a great choice
for battery. We can experiment with ondemand as well, but based on docs,
conservative is recommended.
[ci:skip-build]: build takes too long
* Added display in final pinephone to the kernel
* Added getty
* Use RGB led to signify booting status in u-boot
* Enable CONFIG_GPIO_SYSFS
[ci:skip-build]: won't finish in time
This adds a seperate dts for the longts version of the devkit (which was
the un-inverted version before) and adds a shortts version which was
inverted before, but didn't exist in pmaports yet because I manually
edited the dts for every release.
This MR abuses the kernel switching feature to switch the dtb instead so
shortts/longts can be selected in the init step.
[ci:skip-build]: build won't finish in time
- main: postmarketos-mkinitfs: Add /run
Create the /run directory in the initramfs so that cryptsetup doesn't
crash on not being able to create /run/cryptsetup for lockfiles
- device: pine-dontbeevil: Remove workaround for touchscreen
- main: linux-postmarketos-allwinner: Implemented supplies for touchscreen
This uses a slightly newer commit from the kernel repo that implements
requesting a regulator in the touchscreen driver
- device: pine-dontbeevil: Remove ethernet from initramfs
This actually makes debugging more complicated since networkmanager wont
touch the ethernet adapter afterwards and the initramfs can be debugged
over uart
- temp/u-boot: sync APKBUILD with upstream and update to 2019.04
- main: linux-postmarketos-allwinner: Use 20190521 git version
* Fixed audio
* Fixed battery handeling
* Added fix for touchscreen not working for everyone
* Use newer upstream kernel
[ci:skip-build]: won't finish in time, Martijn made sure that it builds.
* Moved more PinePhone related kernel stuff to the upstream
* Added cma=256M so the CSI subsystem doesn't throw out-of-memory errors
when capturing at higher than 1280x720 resolutions (but it still hangs)
* Removed a lot of modules that get compiled for DVB tuners after
enableing the camera stuff.
[ci:skip-build]: doesn't finish in time
* Inverted the X-axis on the touchscreen
* Enabled the driver for the wifi/bluetooth chip and added it to the dts
* Added a horrible hack for making the touchscreen work
This also decreases the kernel version because the previous version I've
used was technically incorrect.
[ci:skip-build]: doesn't finish in time
* Created seperate DTB for the devkit named sun50i-a64-dontbeevil.dts so
it can easily be edited and the diff remains readable in gitlab
* Added patch to build the new dtb
* Added the ST LIS3MDL to the new dtb (Magnetometer)
* Added the SensorTek STK3335 to the new dtb (Proximity and ambient
light sensor)
* InvenSense MPU-6050 to the new dtb (Accelerometer and gyroscope)
* Added CSI bus and OV5640 camera
Remaining issues:
* The STK3310 module doesn't load automatically
* Camera doesn't want to capture but does show up as /dev/video0
[ci:skip-build]: doesn't finish in time
UART and SSH work and HDMI works in u-boot (just like the pine-a64lts).
It should work now with display and xorg/weston works directly after
installing. Plasma mobile doesn't work directly because both kms and
fbdev are enabled and kms doesn't work yet.
linux-postmarketos-allwinner: update to 5.0.0-rc3 with patches for this
devkit, tested on this device and on pinea64lts (the only other device
using the allwinner kernel).
[ci:skip-build]: won't finish in time
Add firmware-rtl8723bt package and Pine wifi and bluetooth firmware
subpackage.
[skip ci]: ollieparanoid will build this MR manually before merging, it
will probably not finish CI within one hour.
This is a followup to !109 (merged). Affected packages:
* device/linux-samsung-p4wifi
* device/linux-sony-tulip
* device/linux-teclast-x80pro
* main/linux-postmarketos-allwinner
* main/linux-postmarketos-mainline
* main/linux-postmarketos-qcom
* main/linux-postmarketos-stable
[skip ci] I have confirmed that all 7 kernels still compile.
* Added linux-postmarketos-allwinner kernel
* Added copy of alpines u-boot package with pine-a64lts support
* Changed postmarketos-mkinitfs to add the plain .dtb file to the boot partition
